CONFIG_2ND_LEVEL_INTERRUPTS
|
Second-level interrupt support |
CONFIG_2ND_LVL_INTR_00_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 0 |
CONFIG_2ND_LVL_INTR_01_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 1 |
CONFIG_2ND_LVL_INTR_02_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 2 |
CONFIG_2ND_LVL_INTR_03_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 3 |
CONFIG_2ND_LVL_INTR_04_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 4 |
CONFIG_2ND_LVL_INTR_05_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 5 |
CONFIG_2ND_LVL_INTR_06_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 6 |
CONFIG_2ND_LVL_INTR_07_OFFSET
|
Level 1 IRQ line for 2ND level aggregator 7 |
CONFIG_2ND_LVL_ISR_TBL_OFFSET
|
Offset in _sw_isr_table for level 2 interrupts |
CONFIG_3RD_LEVEL_INTERRUPTS
|
Third-level interrupt support |
CONFIG_3RD_LVL_INTR_00_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 0 |
CONFIG_3RD_LVL_INTR_01_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 1 |
CONFIG_3RD_LVL_INTR_02_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 2 |
CONFIG_3RD_LVL_INTR_03_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 3 |
CONFIG_3RD_LVL_INTR_04_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 4 |
CONFIG_3RD_LVL_INTR_05_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 5 |
CONFIG_3RD_LVL_INTR_06_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 6 |
CONFIG_3RD_LVL_INTR_07_OFFSET
|
Level 2 IRQ line for 3RD level aggregator 7 |
CONFIG_3RD_LVL_ISR_TBL_OFFSET
|
Offset in _sw_isr_table for level 3 interrupts |
CONFIG_64BIT
|
|
CONFIG_AARCH64_IMAGE_HEADER
|
Add image header |
CONFIG_ACPI
|
ACPI (Advanced Configuration and Power Interface) support |
CONFIG_ADC
|
ADC drivers |
CONFIG_ADC_ASYNC
|
Enable asynchronous call support |
CONFIG_ADC_CC32XX
|
CC32XX ADC driver |
CONFIG_ADC_CONFIGURABLE_INPUTS
|
|
CONFIG_ADC_EMUL
|
ADC emulator |
CONFIG_ADC_EMUL_ACQUISITION_THREAD_PRIO
|
Priority for the ADC data acquisition thread |
CONFIG_ADC_EMUL_ACQUISITION_THREAD_STACK_SIZE
|
Stack size for the ADC data acquisition thread |
CONFIG_ADC_ITE_IT8XXX2
|
ITE IT8XXX2 ADC driver |
CONFIG_ADC_LMP90XXX
|
LMP90xxx driver |
CONFIG_ADC_LMP90XXX_ACQUISITION_THREAD_PRIO
|
Priority for the ADC data acquisition thread |
CONFIG_ADC_LMP90XXX_ACQUISITION_THREAD_STACK_SIZE
|
Stack size for the ADC data acquisition thread |
CONFIG_ADC_LMP90XXX_CRC
|
Use Cyclic Redundancy Check (CRC) |
CONFIG_ADC_LMP90XXX_GPIO
|
Enable GPIO support |
CONFIG_ADC_LMP90XXX_INIT_PRIORITY
|
Init priority |
CONFIG_ADC_LOG_LEVEL
|
|
CONFIG_ADC_LOG_LEVEL_DBG
|
Debug |
CONFIG_ADC_LOG_LEVEL_ERR
|
Error |
CONFIG_ADC_LOG_LEVEL_INF
|
Info |
CONFIG_ADC_LOG_LEVEL_OFF
|
Off |
CONFIG_ADC_LOG_LEVEL_WRN
|
Warning |
CONFIG_ADC_MCP320X
|
MCP3204/MCP3208 driver |
CONFIG_ADC_MCP320X_ACQUISITION_THREAD_PRIO
|
Priority for the ADC data acquisition thread |
CONFIG_ADC_MCP320X_ACQUISITION_THREAD_STACK_SIZE
|
Stack size for the ADC data acquisition thread |
CONFIG_ADC_MCP320X_INIT_PRIORITY
|
Init priority |
CONFIG_ADC_MCUX_ADC12
|
MCUX ADC12 driver |
CONFIG_ADC_MCUX_ADC16
|
MCUX ADC16 driver |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_1
|
Divide ratio is 1 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_2
|
Divide ratio is 2 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_4
|
Divide ratio is 4 |
CONFIG_ADC_MCUX_ADC16_CLK_DIV_RATIO_8
|
Divide ratio is 8 |
CONFIG_ADC_MCUX_ADC16_ENABLE_EDMA
|
Enable EDMA for adc driver |
CONFIG_ADC_MCUX_ADC16_HW_TRIGGER
|
ADC HW TRIGGER |
CONFIG_ADC_MCUX_ADC16_INIT_PRIORITY
|
Init priority |
CONFIG_ADC_MCUX_ADC16_VREF_ALTERNATE
|
Alternate reference pair |
CONFIG_ADC_MCUX_ADC16_VREF_DEFAULT
|
Default voltage reference pair V_REFH and V_REFL |
CONFIG_ADC_MCUX_LPADC
|
MCUX LPADC driver |
CONFIG_ADC_NPCX
|
Nuvoton NPCX embedded controller (EC) ADC driver |
CONFIG_ADC_NRFX_ADC
|
nRF ADC nrfx driver |
CONFIG_ADC_NRFX_ADC_CHANNEL_COUNT
|
Number of ADC channels |
CONFIG_ADC_NRFX_SAADC
|
nRF SAADC nrfx driver |
CONFIG_ADC_SAM0
|
Atmel SAM0 series ADC Driver |
CONFIG_ADC_SAM_AFEC
|
SAM ADC Driver |
CONFIG_ADC_SHELL
|
Enable ADC Shell |
CONFIG_ADC_STM32
|
STM32 ADC driver |
CONFIG_ADC_XEC
|
Microchip XEC series ADC driver |
CONFIG_ADJUST_DCDC
|
Adjust internal DCDC output |
CONFIG_ADJUST_LDO
|
Adjust LDO setting |
CONFIG_ADT7420
|
ADT7420 Temperature Sensor |
CONFIG_ADT7420_TEMP_CRIT
|
Critical overtemperature in °C |
CONFIG_ADT7420_TEMP_HYST
|
Temperature hysteresis in °C |
CONFIG_ADT7420_THREAD_PRIORITY
|
Thread priority |
CONFIG_ADT7420_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ADT7420_TRIGGER
|
|
CONFIG_ADT7420_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ADT7420_TRIGGER_NONE
|
No trigger |
CONFIG_ADT7420_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_ADXL345
|
ADXL345 Three Axis I2C accelerometer |
CONFIG_ADXL362
|
ADXL362 sensor |
CONFIG_ADXL362_ABS_REF_MODE
|
Absolute or referenced interrupt |
CONFIG_ADXL362_ACCEL_ODR_100
|
100 Hz |
CONFIG_ADXL362_ACCEL_ODR_12_5
|
12.5 Hz |
CONFIG_ADXL362_ACCEL_ODR_200
|
200 Hz |
CONFIG_ADXL362_ACCEL_ODR_25
|
25 Hz |
CONFIG_ADXL362_ACCEL_ODR_400
|
400 Hz |
CONFIG_ADXL362_ACCEL_ODR_50
|
50 Hz |
CONFIG_ADXL362_ACCEL_ODR_RUNTIME
|
Set at runtime. |
CONFIG_ADXL362_ACCEL_RANGE_2G
|
2G |
CONFIG_ADXL362_ACCEL_RANGE_4G
|
4G |
CONFIG_ADXL362_ACCEL_RANGE_8G
|
8G |
CONFIG_ADXL362_ACCEL_RANGE_RUNTIME
|
Set at runtime. |
CONFIG_ADXL362_ACTIVITY_THRESHOLD
|
Upper threshold value |
CONFIG_ADXL362_ACTIVITY_TIME
|
Upper threshold time |
CONFIG_ADXL362_INACTIVITY_THRESHOLD
|
Lower threshold value |
CONFIG_ADXL362_INACTIVITY_TIME
|
Lower threshold time |
CONFIG_ADXL362_INTERRUPT_MODE
|
Activity and inactivity interrupt mode |
CONFIG_ADXL362_THREAD_PRIORITY
|
Thread priority |
CONFIG_ADXL362_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ADXL362_TRIGGER
|
|
CONFIG_ADXL362_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ADXL362_TRIGGER_NONE
|
No trigger |
CONFIG_ADXL362_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_ADXL372
|
ADXL372 Three Axis High-g I2C/SPI accelerometer |
CONFIG_ADXL372_ACTIVITY_THRESHOLD
|
Activity threshold in mg |
CONFIG_ADXL372_ACTIVITY_TIME
|
Activity time |
CONFIG_ADXL372_BW_1600HZ
|
1600 Hz |
CONFIG_ADXL372_BW_200HZ
|
200 Hz |
CONFIG_ADXL372_BW_3200HZ
|
3200 Hz |
CONFIG_ADXL372_BW_400HZ
|
400 Hz |
CONFIG_ADXL372_BW_800HZ
|
800 Hz |
CONFIG_ADXL372_HPF_CORNER0
|
ODR/210 |
CONFIG_ADXL372_HPF_CORNER1
|
ODR/411 |
CONFIG_ADXL372_HPF_CORNER2
|
ODR/812 |
CONFIG_ADXL372_HPF_CORNER3
|
ODR/1616 |
CONFIG_ADXL372_HPF_DISABLE
|
Disabled |
CONFIG_ADXL372_I2C
|
I2C Interface |
CONFIG_ADXL372_INACTIVITY_THRESHOLD
|
In-activity threshold in mg |
CONFIG_ADXL372_INACTIVITY_TIME
|
In-activity time |
CONFIG_ADXL372_LPF_DISABLE
|
Disabled |
CONFIG_ADXL372_MEASUREMENT_MODE
|
Measurement Mode |
CONFIG_ADXL372_ODR_1600HZ
|
1600 Hz |
CONFIG_ADXL372_ODR_3200HZ
|
3200 Hz |
CONFIG_ADXL372_ODR_400HZ
|
400 Hz |
CONFIG_ADXL372_ODR_6400HZ
|
6400 Hz |
CONFIG_ADXL372_ODR_800HZ
|
800 Hz |
CONFIG_ADXL372_PEAK_DETECT_MODE
|
Max Peak detect mode |
CONFIG_ADXL372_REFERENCED_ACTIVITY_DETECTION_MODE
|
Use referenced activity/in-activity detection |
CONFIG_ADXL372_SPI
|
SPI Interface |
CONFIG_ADXL372_THREAD_PRIORITY
|
Thread priority |
CONFIG_ADXL372_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ADXL372_TRIGGER
|
|
CONFIG_ADXL372_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ADXL372_TRIGGER_NONE
|
No trigger |
CONFIG_ADXL372_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_AGPS_LOG_LEVEL
|
|
CONFIG_AGPS_LOG_LEVEL_DBG
|
Debug |
CONFIG_AGPS_LOG_LEVEL_ERR
|
Error |
CONFIG_AGPS_LOG_LEVEL_INF
|
Info |
CONFIG_AGPS_LOG_LEVEL_OFF
|
Off |
CONFIG_AGPS_LOG_LEVEL_WRN
|
Warning |
CONFIG_AHB_DIV
|
AHB clock divider |
CONFIG_AK8975
|
AK8975 Magnetometer |
CONFIG_ALTERA_AVALON_I2C
|
|
CONFIG_ALTERA_AVALON_MSGDMA
|
|
CONFIG_ALTERA_AVALON_QSPI
|
|
CONFIG_ALTERA_AVALON_SYSID
|
|
CONFIG_ALTERA_AVALON_TIMER
|
Altera Avalon Interval Timer |
CONFIG_AMG88XX
|
AMG88XX Infrared Thermopile Sensor |
CONFIG_AMG88XX_THREAD_PRIORITY
|
Thread priority |
CONFIG_AMG88XX_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_AMG88XX_TRIGGER
|
|
CONFIG_AMG88XX_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_AMG88XX_TRIGGER_NONE
|
No trigger |
CONFIG_AMG88XX_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_AMS_IAQ_CORE
|
iAQ-core Digital VOC sensor |
CONFIG_APA102_STRIP
|
APA102 SPI LED strip driver |
CONFIG_APDS9960
|
APDS9960 Sensor |
CONFIG_APDS9960_AGAIN_16X
|
16x |
CONFIG_APDS9960_AGAIN_1X
|
1x |
CONFIG_APDS9960_AGAIN_4X
|
4x |
CONFIG_APDS9960_AGAIN_64X
|
64x |
CONFIG_APDS9960_ENABLE_ALS
|
Enable Ambient Light Sense |
CONFIG_APDS9960_PGAIN_1X
|
1x |
CONFIG_APDS9960_PGAIN_2X
|
2x |
CONFIG_APDS9960_PGAIN_4X
|
4x |
CONFIG_APDS9960_PGAIN_8X
|
8x |
CONFIG_APDS9960_PLED_BOOST_100PCT
|
100% |
CONFIG_APDS9960_PLED_BOOST_150PCT
|
150% |
CONFIG_APDS9960_PLED_BOOST_200PCT
|
200% |
CONFIG_APDS9960_PLED_BOOST_300PCT
|
300% |
CONFIG_APDS9960_PPULSE_COUNT
|
Proximity Pulse Count |
CONFIG_APDS9960_PPULSE_LENGTH_16US
|
16us |
CONFIG_APDS9960_PPULSE_LENGTH_32US
|
32us |
CONFIG_APDS9960_PPULSE_LENGTH_4US
|
4us |
CONFIG_APDS9960_PPULSE_LENGTH_8US
|
8us |
CONFIG_APDS9960_TRIGGER
|
|
CONFIG_APDS9960_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_APDS9960_TRIGGER_NONE
|
No trigger |
CONFIG_APIC_TIMER
|
New local APIC timer |
CONFIG_APIC_TIMER_IRQ
|
Local APIC timer IRQ |
CONFIG_APIC_TIMER_IRQ_PRIORITY
|
Local APIC timer interrupt priority |
CONFIG_APIC_TIMER_TSC
|
Use invariant TSC for sys_clock_cycle_get_32() |
CONFIG_APIC_TIMER_TSC_M
|
TSC to local APIC timer frequency divisor (M) |
CONFIG_APIC_TIMER_TSC_N
|
TSC to local APIC timer frequency multiplier (N) |
CONFIG_APIC_TSC_DEADLINE_TIMER
|
Even newer APIC timer using TSC deadline mode |
CONFIG_APPLICATION_DEFINED_SYSCALL
|
Scan application folder for any syscall definition |
CONFIG_APPLICATION_INIT_PRIORITY
|
Default init priority for application level drivers |
CONFIG_APP_LINK_WITH_FS
|
Link ‘app’ with FS |
CONFIG_APP_LINK_WITH_LVGL
|
Link ‘app’ with LVGL |
CONFIG_APP_LINK_WITH_MBEDTLS
|
Link ‘app’ with MBEDTLS |
CONFIG_APP_LINK_WITH_MCUMGR
|
Link ‘app’ with MCUMGR |
CONFIG_APP_LINK_WITH_POSIX_SUBSYS
|
Make POSIX headers available to application |
CONFIG_ARC
|
|
CONFIG_ARCH
|
|
CONFIG_ARCH_HAS_COHERENCE
|
|
CONFIG_ARCH_HAS_CUSTOM_BUSY_WAIT
|
|
CONFIG_ARCH_HAS_CUSTOM_SWAP_TO_MAIN
|
|
CONFIG_ARCH_HAS_DEMAND_PAGING
|
|
CONFIG_ARCH_HAS_EXECUTABLE_PAGE_BIT
|
|
CONFIG_ARCH_HAS_EXTRA_EXCEPTION_INFO
|
|
CONFIG_ARCH_HAS_GDBSTUB
|
|
CONFIG_ARCH_HAS_NESTED_EXCEPTION_DETECTION
|
|
CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT
|
|
CONFIG_ARCH_HAS_RAMFUNC_SUPPORT
|
|
CONFIG_ARCH_HAS_RESERVED_PAGE_FRAMES
|
|
CONFIG_ARCH_HAS_SINGLE_THREAD_SUPPORT
|
|
CONFIG_ARCH_HAS_STACK_PROTECTION
|
|
CONFIG_ARCH_HAS_THREAD_ABORT
|
|
CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE
|
|
CONFIG_ARCH_HAS_TIMING_FUNCTIONS
|
|
CONFIG_ARCH_HAS_TRUSTED_EXECUTION
|
|
CONFIG_ARCH_HAS_USERSPACE
|
|
CONFIG_ARCH_IS_SET
|
|
CONFIG_ARCH_LOG_LEVEL
|
|
CONFIG_ARCH_LOG_LEVEL_DBG
|
Debug |
CONFIG_ARCH_LOG_LEVEL_ERR
|
Error |
CONFIG_ARCH_LOG_LEVEL_INF
|
Info |
CONFIG_ARCH_LOG_LEVEL_OFF
|
Off |
CONFIG_ARCH_LOG_LEVEL_WRN
|
Warning |
CONFIG_ARCH_MAPS_ALL_RAM
|
|
CONFIG_ARCH_MEM_DOMAIN_DATA
|
|
CONFIG_ARCH_MEM_DOMAIN_SYNCHRONOUS_API
|
|
CONFIG_ARCH_POSIX
|
|
CONFIG_ARCH_POSIX_RECOMMENDED_STACK_SIZE
|
|
CONFIG_ARCH_SUPPORTS_ARCH_HW_INIT
|
|
CONFIG_ARCH_SUPPORTS_COREDUMP
|
|
CONFIG_ARCH_SW_ISR_TABLE_ALIGN
|
Alignment size of a software ISR table |
CONFIG_ARCV2_INTERRUPT_UNIT
|
ARCv2 Interrupt Unit |
CONFIG_ARCV2_TIMER
|
ARC Timer |
CONFIG_ARCV2_TIMER_IRQ_PRIORITY
|
ARC timer interrupt priority |
CONFIG_ARC_CONNECT
|
ARC has ARC connect |
CONFIG_ARC_CORE_MPU
|
ARC Core MPU functionalities |
CONFIG_ARC_EXCEPTION_DEBUG
|
Unhandled exception debugging information |
CONFIG_ARC_EXCEPTION_STACK_SIZE
|
ARC exception handling stack size |
CONFIG_ARC_FIRQ
|
FIRQ enable |
CONFIG_ARC_FIRQ_STACK
|
Enable separate firq stack |
CONFIG_ARC_FIRQ_STACK_SIZE
|
FIRQ stack size |
CONFIG_ARC_HAS_ACCL_REGS
|
Reg Pair ACCL:ACCH (FPU and/or MPY > 6) |
CONFIG_ARC_HAS_SECURE
|
ARC has SecureShield |
CONFIG_ARC_HAS_STACK_CHECKING
|
ARC has STACK_CHECKING |
CONFIG_ARC_HAS_ZOL
|
|
CONFIG_ARC_MPU
|
ARC MPU Support |
CONFIG_ARC_MPU_ENABLE
|
Enable MPU |
CONFIG_ARC_MPU_VER
|
ARC MPU version |
CONFIG_ARC_NORMAL_FIRMWARE
|
Generate Normal Firmware |
CONFIG_ARC_SECURE_FIRMWARE
|
Generate Secure Firmware |
CONFIG_ARC_STACK_CHECKING
|
|
CONFIG_ARC_STACK_PROTECTION
|
|
CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
|
Enable unaligned access in HW |
CONFIG_ARM
|
|
CONFIG_ARM64
|
|
CONFIG_ARM64_PA_BITS
|
|
CONFIG_ARM64_PA_BITS_32
|
32-bit |
CONFIG_ARM64_PA_BITS_36
|
36-bit |
CONFIG_ARM64_PA_BITS_40
|
40-bit |
CONFIG_ARM64_PA_BITS_42
|
42-bit |
CONFIG_ARM64_PA_BITS_48
|
48-bit |
CONFIG_ARM64_VA_BITS
|
|
CONFIG_ARM64_VA_BITS_32
|
32-bit |
CONFIG_ARM64_VA_BITS_36
|
36-bit |
CONFIG_ARM64_VA_BITS_40
|
40-bit |
CONFIG_ARM64_VA_BITS_42
|
42-bit |
CONFIG_ARM64_VA_BITS_48
|
48-bit |
CONFIG_ARMV6_M_ARMV8_M_BASELINE
|
|
CONFIG_ARMV7_EXCEPTION_STACK_SIZE
|
Undefined Instruction and Abort stack size (in bytes) |
CONFIG_ARMV7_FIQ_STACK_SIZE
|
FIQ stack size (in bytes) |
CONFIG_ARMV7_M_ARMV8_M_FP
|
|
CONFIG_ARMV7_M_ARMV8_M_MAINLINE
|
|
CONFIG_ARMV7_R
|
|
CONFIG_ARMV7_R_FP
|
|
CONFIG_ARMV7_SVC_STACK_SIZE
|
SVC stack size (in bytes) |
CONFIG_ARMV7_SYS_STACK_SIZE
|
SYS stack size (in bytes) |
CONFIG_ARMV8_1_M_MAINLINE
|
|
CONFIG_ARMV8_A
|
|
CONFIG_ARMV8_A_NS
|
ARMv8-A Normal World (Non-Secure world of Trustzone) |
CONFIG_ARMV8_M_BASELINE
|
|
CONFIG_ARMV8_M_DSP
|
|
CONFIG_ARMV8_M_MAINLINE
|
|
CONFIG_ARMV8_M_SE
|
|
CONFIG_ARMV8_R
|
|
CONFIG_ARM_ARCH_TIMER
|
ARM architected timer |
CONFIG_ARM_CLOCK_CONTROL_DEV_NAME
|
Clock Config Device name |
CONFIG_ARM_CUSTOM_INTERRUPT_CONTROLLER
|
|
CONFIG_ARM_DIV
|
ARM clock divider |
CONFIG_ARM_ENTRY_VENEERS_LIB_NAME
|
Entry Veneers symbol file |
CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCS
|
Secure Firmware has Secure Entry functions |
CONFIG_ARM_FIRMWARE_USES_SECURE_ENTRY_FUNCS
|
Non-Secure Firmware uses Secure Entry functions |
CONFIG_ARM_MMU
|
ARM MMU Support |
CONFIG_ARM_MPU
|
ARM MPU Support |
CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE
|
|
CONFIG_ARM_NONSECURE_FIRMWARE
|
|
CONFIG_ARM_NONSECURE_PREEMPTIBLE_SECURE_CALLS
|
Allow secure function calls to be preempted |
CONFIG_ARM_NSC_REGION_BASE_ADDRESS
|
ARM Non-Secure Callable Region base address |
CONFIG_ARM_SECURE_BUSFAULT_HARDFAULT_NMI
|
BusFault, HardFault, and NMI target Secure state |
CONFIG_ARM_SECURE_FIRMWARE
|
|
CONFIG_ARM_STACK_PROTECTION
|
|
CONFIG_ARM_STORE_EXC_RETURN
|
|
CONFIG_ARM_TRUSTZONE_M
|
ARM TrustZone-M support |
CONFIG_ASAN
|
Build with address sanitizer |
CONFIG_ASAN_NOP_DLCLOSE
|
Override host OS dlclose() with a NOP |
CONFIG_ASF
|
|
CONFIG_ASSEMBLER_ISA_THUMB2
|
|
CONFIG_ASSERT
|
Enable __ASSERT() macro |
CONFIG_ASSERT_LEVEL
|
__ASSERT() level |
CONFIG_ASSERT_NO_COND_INFO
|
Disable condition info for asserts |
CONFIG_ASSERT_NO_FILE_INFO
|
Disable file info for asserts |
CONFIG_ASSERT_NO_MSG_INFO
|
Disable message for asserts |
CONFIG_ASSERT_ON_ERRORS
|
Assert on all errors |
CONFIG_ASSERT_VERBOSE
|
Enable verbose assertions |
CONFIG_ATMEL_WINC1500
|
|
CONFIG_ATOMIC_OPERATIONS_ARCH
|
|
CONFIG_ATOMIC_OPERATIONS_BUILTIN
|
|
CONFIG_ATOMIC_OPERATIONS_C
|
|
CONFIG_AT_CMD_LOG_LEVEL
|
|
CONFIG_AT_CMD_LOG_LEVEL_DBG
|
Debug |
CONFIG_AT_CMD_LOG_LEVEL_ERR
|
Error |
CONFIG_AT_CMD_LOG_LEVEL_INF
|
Info |
CONFIG_AT_CMD_LOG_LEVEL_OFF
|
Off |
CONFIG_AT_CMD_LOG_LEVEL_WRN
|
Warning |
CONFIG_AT_HOST_LOG_LEVEL
|
|
CONFIG_AT_HOST_LOG_LEVEL_DBG
|
Debug |
CONFIG_AT_HOST_LOG_LEVEL_ERR
|
Error |
CONFIG_AT_HOST_LOG_LEVEL_INF
|
Info |
CONFIG_AT_HOST_LOG_LEVEL_OFF
|
Off |
CONFIG_AT_HOST_LOG_LEVEL_WRN
|
Warning |
CONFIG_AT_MONITOR_LOG_LEVEL
|
|
CONFIG_AT_MONITOR_LOG_LEVEL_DBG
|
Debug |
CONFIG_AT_MONITOR_LOG_LEVEL_ERR
|
Error |
CONFIG_AT_MONITOR_LOG_LEVEL_INF
|
Info |
CONFIG_AT_MONITOR_LOG_LEVEL_OFF
|
Off |
CONFIG_AT_MONITOR_LOG_LEVEL_WRN
|
Warning |
CONFIG_AT_NOTIF_LOG_LEVEL
|
|
CONFIG_AT_NOTIF_LOG_LEVEL_DBG
|
Debug |
CONFIG_AT_NOTIF_LOG_LEVEL_ERR
|
Error |
CONFIG_AT_NOTIF_LOG_LEVEL_INF
|
Info |
CONFIG_AT_NOTIF_LOG_LEVEL_OFF
|
Off |
CONFIG_AT_NOTIF_LOG_LEVEL_WRN
|
Warning |
CONFIG_AUDIO
|
Support for Audio |
CONFIG_AUDIO_CODEC
|
Audio Codec Drivers |
CONFIG_AUDIO_CODEC_INIT_PRIORITY
|
Init priority |
CONFIG_AUDIO_CODEC_LOG_LEVEL
|
|
CONFIG_AUDIO_CODEC_LOG_LEVEL_DBG
|
Debug |
CONFIG_AUDIO_CODEC_LOG_LEVEL_ERR
|
Error |
CONFIG_AUDIO_CODEC_LOG_LEVEL_INF
|
Info |
CONFIG_AUDIO_CODEC_LOG_LEVEL_OFF
|
Off |
CONFIG_AUDIO_CODEC_LOG_LEVEL_WRN
|
Warning |
CONFIG_AUDIO_DMIC
|
Digital Microphone (Audio) Drivers |
CONFIG_AUDIO_DMIC_INIT_PRIORITY
|
Init priority |
CONFIG_AUDIO_DMIC_LOG_LEVEL
|
|
CONFIG_AUDIO_DMIC_LOG_LEVEL_DBG
|
Debug |
CONFIG_AUDIO_DMIC_LOG_LEVEL_ERR
|
Error |
CONFIG_AUDIO_DMIC_LOG_LEVEL_INF
|
Info |
CONFIG_AUDIO_DMIC_LOG_LEVEL_OFF
|
Off |
CONFIG_AUDIO_DMIC_LOG_LEVEL_WRN
|
Warning |
CONFIG_AUDIO_INTEL_DMIC
|
Intel digital PDM microphone driver support |
CONFIG_AUDIO_MPXXDTYY
|
ST Digital PDM microphone attached to I2S support |
CONFIG_AUDIO_TLV320DAC
|
TLV320DAC310x DAC support |
CONFIG_AWS_FOTA_LOG_LEVEL
|
|
CONFIG_AWS_FOTA_LOG_LEVEL_DBG
|
Debug |
CONFIG_AWS_FOTA_LOG_LEVEL_ERR
|
Error |
CONFIG_AWS_FOTA_LOG_LEVEL_INF
|
Info |
CONFIG_AWS_FOTA_LOG_LEVEL_OFF
|
Off |
CONFIG_AWS_FOTA_LOG_LEVEL_WRN
|
Warning |
CONFIG_AWS_IOT_LOG_LEVEL
|
|
CONFIG_AWS_IOT_LOG_LEVEL_DBG
|
Debug |
CONFIG_AWS_IOT_LOG_LEVEL_ERR
|
Error |
CONFIG_AWS_IOT_LOG_LEVEL_INF
|
Info |
CONFIG_AWS_IOT_LOG_LEVEL_OFF
|
Off |
CONFIG_AWS_IOT_LOG_LEVEL_WRN
|
Warning |
CONFIG_AWS_JOBS_LOG_LEVEL
|
|
CONFIG_AWS_JOBS_LOG_LEVEL_DBG
|
Debug |
CONFIG_AWS_JOBS_LOG_LEVEL_ERR
|
Error |
CONFIG_AWS_JOBS_LOG_LEVEL_INF
|
Info |
CONFIG_AWS_JOBS_LOG_LEVEL_OFF
|
Off |
CONFIG_AWS_JOBS_LOG_LEVEL_WRN
|
Warning |
CONFIG_AZURE_FOTA_LOG_LEVEL
|
|
CONFIG_AZURE_FOTA_LOG_LEVEL_DBG
|
Debug |
CONFIG_AZURE_FOTA_LOG_LEVEL_ERR
|
Error |
CONFIG_AZURE_FOTA_LOG_LEVEL_INF
|
Info |
CONFIG_AZURE_FOTA_LOG_LEVEL_OFF
|
Off |
CONFIG_AZURE_FOTA_LOG_LEVEL_WRN
|
Warning |
CONFIG_AZURE_IOT_HUB_LOG_LEVEL
|
|
CONFIG_AZURE_IOT_HUB_LOG_LEVEL_DBG
|
Debug |
CONFIG_AZURE_IOT_HUB_LOG_LEVEL_ERR
|
Error |
CONFIG_AZURE_IOT_HUB_LOG_LEVEL_INF
|
Info |
CONFIG_AZURE_IOT_HUB_LOG_LEVEL_OFF
|
Off |
CONFIG_AZURE_IOT_HUB_LOG_LEVEL_WRN
|
Warning |
CONFIG_B91_CPU_RISCV32
|
RISCV32 CPU Architecture |
CONFIG_BACKING_STORE_CUSTOM
|
Custom backing store implementation |
CONFIG_BACKING_STORE_RAM
|
RAM-based test backing store |
CONFIG_BACKING_STORE_RAM_PAGES
|
Number of pages for RAM backing store |
CONFIG_BASE64
|
Enable base64 encoding and decoding |
CONFIG_BATTERY_SENSE
|
Enable the battery sense circuit |
CONFIG_BIG_ENDIAN
|
|
CONFIG_BLE_CC13XX_CC26XX
|
|
CONFIG_BMA280
|
BMA280 Three Axis Accelerometer Family |
CONFIG_BMA280_PMU_BW_1
|
7.81Hz |
CONFIG_BMA280_PMU_BW_2
|
15.63HZ |
CONFIG_BMA280_PMU_BW_3
|
31.25Hz |
CONFIG_BMA280_PMU_BW_4
|
62.5Hz |
CONFIG_BMA280_PMU_BW_5
|
125Hz |
CONFIG_BMA280_PMU_BW_6
|
250HZ |
CONFIG_BMA280_PMU_BW_7
|
500Hz |
CONFIG_BMA280_PMU_BW_8
|
unfiltered |
CONFIG_BMA280_PMU_RANGE_16G
|
+/-16g |
CONFIG_BMA280_PMU_RANGE_2G
|
+/-2g |
CONFIG_BMA280_PMU_RANGE_4G
|
+/-4g |
CONFIG_BMA280_PMU_RANGE_8G
|
+/-8g |
CONFIG_BMA280_THREAD_PRIORITY
|
Thread priority |
CONFIG_BMA280_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_BMA280_TRIGGER
|
|
CONFIG_BMA280_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_BMA280_TRIGGER_NONE
|
No trigger |
CONFIG_BMA280_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_BMC150_MAGN
|
BMC150_MAGN I2C Magnetometer Chip |
CONFIG_BMC150_MAGN_PRESET_ENHANCED_REGULAR
|
Enhanced regular (15, 27, 10) |
CONFIG_BMC150_MAGN_PRESET_HIGH_ACCURACY
|
High accuracy (47, 83, 20) |
CONFIG_BMC150_MAGN_PRESET_LOW_POWER
|
Low power (3, 3, 10) |
CONFIG_BMC150_MAGN_PRESET_REGULAR
|
Regular (9, 15, 10) |
CONFIG_BMC150_MAGN_SAMPLING_RATE_RUNTIME
|
Enable dynamic sampling rate |
CONFIG_BMC150_MAGN_SAMPLING_REP_XY
|
Enable dynamic XY oversampling |
CONFIG_BMC150_MAGN_SAMPLING_REP_Z
|
Enable dynamic Z oversampling |
CONFIG_BMC150_MAGN_TRIGGER
|
Enable triggers |
CONFIG_BMC150_MAGN_TRIGGER_DRDY
|
Enable data ready trigger |
CONFIG_BMC150_MAGN_TRIGGER_THREAD_STACK
|
Thread stack size |
CONFIG_BME280
|
BME280/BMP280 sensor |
CONFIG_BME280_FILTER_16
|
16 |
CONFIG_BME280_FILTER_2
|
2 |
CONFIG_BME280_FILTER_4
|
4 |
CONFIG_BME280_FILTER_8
|
8 |
CONFIG_BME280_FILTER_OFF
|
filter off |
CONFIG_BME280_HUMIDITY_OVER_16X
|
x16 |
CONFIG_BME280_HUMIDITY_OVER_1X
|
x1 |
CONFIG_BME280_HUMIDITY_OVER_2X
|
x2 |
CONFIG_BME280_HUMIDITY_OVER_4X
|
x4 |
CONFIG_BME280_HUMIDITY_OVER_8X
|
x8 |
CONFIG_BME280_MODE_FORCED
|
forced |
CONFIG_BME280_MODE_NORMAL
|
normal |
CONFIG_BME280_PRESS_OVER_16X
|
x16 |
CONFIG_BME280_PRESS_OVER_1X
|
x1 |
CONFIG_BME280_PRESS_OVER_2X
|
x2 |
CONFIG_BME280_PRESS_OVER_4X
|
x4 |
CONFIG_BME280_PRESS_OVER_8X
|
x8 |
CONFIG_BME280_STANDBY_05MS
|
0.5ms |
CONFIG_BME280_STANDBY_1000MS
|
1000ms |
CONFIG_BME280_STANDBY_125MS
|
125ms |
CONFIG_BME280_STANDBY_2000MS
|
2000ms BMP280 / 10ms BME280 |
CONFIG_BME280_STANDBY_250MS
|
250ms |
CONFIG_BME280_STANDBY_4000MS
|
4000ms BMP280 / 20ms BME280 |
CONFIG_BME280_STANDBY_500MS
|
500ms |
CONFIG_BME280_STANDBY_62MS
|
62.5ms |
CONFIG_BME280_TEMP_OVER_16X
|
x16 |
CONFIG_BME280_TEMP_OVER_1X
|
x1 |
CONFIG_BME280_TEMP_OVER_2X
|
x2 |
CONFIG_BME280_TEMP_OVER_4X
|
x4 |
CONFIG_BME280_TEMP_OVER_8X
|
x8 |
CONFIG_BME680
|
BME680 sensor |
CONFIG_BME680_FILTER_128
|
128 |
CONFIG_BME680_FILTER_16
|
16 |
CONFIG_BME680_FILTER_2
|
2 |
CONFIG_BME680_FILTER_32
|
32 |
CONFIG_BME680_FILTER_4
|
4 |
CONFIG_BME680_FILTER_64
|
64 |
CONFIG_BME680_FILTER_8
|
8 |
CONFIG_BME680_FILTER_OFF
|
filter off |
CONFIG_BME680_HEATR_DUR_LP
|
197 |
CONFIG_BME680_HEATR_DUR_ULP
|
1943 |
CONFIG_BME680_HEATR_TEMP_LP
|
320 |
CONFIG_BME680_HEATR_TEMP_ULP
|
400 |
CONFIG_BME680_HUMIDITY_OVER_16X
|
x16 |
CONFIG_BME680_HUMIDITY_OVER_1X
|
x1 |
CONFIG_BME680_HUMIDITY_OVER_2X
|
x2 |
CONFIG_BME680_HUMIDITY_OVER_4X
|
x4 |
CONFIG_BME680_HUMIDITY_OVER_8X
|
x8 |
CONFIG_BME680_PRESS_OVER_16X
|
x16 |
CONFIG_BME680_PRESS_OVER_1X
|
x1 |
CONFIG_BME680_PRESS_OVER_2X
|
x2 |
CONFIG_BME680_PRESS_OVER_4X
|
x4 |
CONFIG_BME680_PRESS_OVER_8X
|
x8 |
CONFIG_BME680_TEMP_OVER_16X
|
x16 |
CONFIG_BME680_TEMP_OVER_1X
|
x1 |
CONFIG_BME680_TEMP_OVER_2X
|
x2 |
CONFIG_BME680_TEMP_OVER_4X
|
x4 |
CONFIG_BME680_TEMP_OVER_8X
|
x8 |
CONFIG_BMG160
|
Bosch BMG160 gyroscope support |
CONFIG_BMG160_I2C_SPEED_FAST
|
Fast |
CONFIG_BMG160_I2C_SPEED_STANDARD
|
Standard |
CONFIG_BMG160_ODR_100
|
100 Hz |
CONFIG_BMG160_ODR_1000
|
1000 Hz |
CONFIG_BMG160_ODR_200
|
200 Hz |
CONFIG_BMG160_ODR_2000
|
2000 Hz |
CONFIG_BMG160_ODR_400
|
400 Hz |
CONFIG_BMG160_ODR_RUNTIME
|
Set at runtime. |
CONFIG_BMG160_RANGE_1000DPS
|
1000 DPS |
CONFIG_BMG160_RANGE_125DPS
|
125 DPS |
CONFIG_BMG160_RANGE_2000DPS
|
2000 DPS |
CONFIG_BMG160_RANGE_250DPS
|
250 DPS |
CONFIG_BMG160_RANGE_500DPS
|
500 DPS |
CONFIG_BMG160_RANGE_RUNTIME
|
Set at runtime. |
CONFIG_BMG160_THREAD_PRIORITY
|
Own thread priority |
CONFIG_BMG160_THREAD_STACK_SIZE
|
Own thread stack size |
CONFIG_BMG160_TRIGGER
|
|
CONFIG_BMG160_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_BMG160_TRIGGER_NONE
|
No trigger |
CONFIG_BMG160_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_BMI160
|
Bosch BMI160 inertial measurement unit |
CONFIG_BMI160_ACCEL_ODR_100
|
100 Hz |
CONFIG_BMI160_ACCEL_ODR_1600
|
1600 Hz |
CONFIG_BMI160_ACCEL_ODR_200
|
200 Hz |
CONFIG_BMI160_ACCEL_ODR_25
|
25 Hz |
CONFIG_BMI160_ACCEL_ODR_25_16
|
1.56 Hz |
CONFIG_BMI160_ACCEL_ODR_25_2
|
12.5 Hz |
CONFIG_BMI160_ACCEL_ODR_25_32
|
0.78 Hz |
CONFIG_BMI160_ACCEL_ODR_25_4
|
6.25 Hz |
CONFIG_BMI160_ACCEL_ODR_25_8
|
3.125 Hz |
CONFIG_BMI160_ACCEL_ODR_400
|
400 Hz |
CONFIG_BMI160_ACCEL_ODR_50
|
50 Hz |
CONFIG_BMI160_ACCEL_ODR_800
|
800 Hz |
CONFIG_BMI160_ACCEL_ODR_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_ACCEL_PMU_LOW_POWER
|
low power |
CONFIG_BMI160_ACCEL_PMU_NORMAL
|
normal |
CONFIG_BMI160_ACCEL_PMU_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_ACCEL_PMU_SUSPEND
|
suspended/not used |
CONFIG_BMI160_ACCEL_RANGE_16G
|
16G |
CONFIG_BMI160_ACCEL_RANGE_2G
|
2G |
CONFIG_BMI160_ACCEL_RANGE_4G
|
4G |
CONFIG_BMI160_ACCEL_RANGE_8G
|
8G |
CONFIG_BMI160_ACCEL_RANGE_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_GYRO_ODR_100
|
100 Hz |
CONFIG_BMI160_GYRO_ODR_1600
|
1600 Hz |
CONFIG_BMI160_GYRO_ODR_200
|
200 Hz |
CONFIG_BMI160_GYRO_ODR_25
|
25 Hz |
CONFIG_BMI160_GYRO_ODR_3200
|
3200 Hz |
CONFIG_BMI160_GYRO_ODR_400
|
400 Hz |
CONFIG_BMI160_GYRO_ODR_50
|
50 Hz |
CONFIG_BMI160_GYRO_ODR_800
|
800 Hz |
CONFIG_BMI160_GYRO_ODR_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_GYRO_PMU_FAST_STARTUP
|
fast start-up |
CONFIG_BMI160_GYRO_PMU_NORMAL
|
normal |
CONFIG_BMI160_GYRO_PMU_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_GYRO_PMU_SUSPEND
|
suspended/not used |
CONFIG_BMI160_GYRO_RANGE_1000DPS
|
1000 DPS |
CONFIG_BMI160_GYRO_RANGE_125DPS
|
125 DPS |
CONFIG_BMI160_GYRO_RANGE_2000DPS
|
2000 DPS |
CONFIG_BMI160_GYRO_RANGE_250DPS
|
250 DPS |
CONFIG_BMI160_GYRO_RANGE_500DPS
|
500 DPS |
CONFIG_BMI160_GYRO_RANGE_RUNTIME
|
Set at runtime. |
CONFIG_BMI160_THREAD_PRIORITY
|
Own thread priority |
CONFIG_BMI160_THREAD_STACK_SIZE
|
Own thread stack size |
CONFIG_BMI160_TRIGGER
|
|
CONFIG_BMI160_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_BMI160_TRIGGER_NONE
|
No trigger |
CONFIG_BMI160_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_BMI270
|
BMI270 Inertial measurement unit |
CONFIG_BMM150
|
BMM150 I2C Geomagnetic Chip |
CONFIG_BMM150_PRESET_ENHANCED_REGULAR
|
Enhanced regular (15, 27, 10) |
CONFIG_BMM150_PRESET_HIGH_ACCURACY
|
High accuracy (47, 83, 20) |
CONFIG_BMM150_PRESET_LOW_POWER
|
Low power (3, 3, 10) |
CONFIG_BMM150_PRESET_REGULAR
|
Regular (9, 15, 10) |
CONFIG_BMM150_SAMPLING_RATE_RUNTIME
|
Enable dynamic sampling rate |
CONFIG_BMM150_SAMPLING_REP_XY
|
Enable dynamic XY oversampling |
CONFIG_BMM150_SAMPLING_REP_Z
|
Enable dynamic Z oversampling |
CONFIG_BMP388
|
Bosch BMP388 pressure sensor |
CONFIG_BMP388_ODR_RUNTIME
|
Change ODR at runtime. |
CONFIG_BMP388_OSR_RUNTIME
|
Change OSR at runtime. |
CONFIG_BMP388_THREAD_PRIORITY
|
Own thread priority |
CONFIG_BMP388_THREAD_STACK_SIZE
|
Own thread stack size |
CONFIG_BMP388_TRIGGER
|
|
CONFIG_BMP388_TRIGGER_DIRECT
|
Use IRQ handler |
CONFIG_BMP388_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_BMP388_TRIGGER_NONE
|
No trigger |
CONFIG_BMP388_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_BOARD
|
|
CONFIG_BOARD_96B_AEROCORE2
|
96Boards AEROCORE2 (STM32F427) |
CONFIG_BOARD_96B_ARGONKEY
|
96Boards Argonkey |
CONFIG_BOARD_96B_AVENGER96
|
96Boards Avenger96 Board |
CONFIG_BOARD_96B_CARBON
|
96Boards Carbon (STM32F401) |
CONFIG_BOARD_96B_CARBON_NRF51
|
96Boards Carbon (nRF51) |
CONFIG_BOARD_96B_MEERKAT96
|
96Boards Meerkat96 board |
CONFIG_BOARD_96B_NEONKEY
|
96Boards Neonkey |
CONFIG_BOARD_96B_NITROGEN
|
96Boards Nitrogen |
CONFIG_BOARD_96B_STM32_SENSOR_MEZ
|
96Boards STM32 Sensor Mezzanine Board |
CONFIG_BOARD_96B_WISTRIO
|
96boards WisTrio Development Board |
CONFIG_BOARD_ACRN
|
ACRN User OS |
CONFIG_BOARD_ACTINIUS_ICARUS
|
Actinius Icarus |
CONFIG_BOARD_ACTINIUS_ICARUS_BEE
|
Actinius Icarus Bee |
CONFIG_BOARD_ACTINIUS_ICARUS_BEE_NS
|
Actinius Icarus Bee Non-Secure |
CONFIG_BOARD_ACTINIUS_ICARUS_NS
|
Actinius Icarus Non-Secure |
CONFIG_BOARD_ACTINIUS_ICARUS_SOM
|
Actinius Icarus SoM |
CONFIG_BOARD_ACTINIUS_ICARUS_SOM_NS
|
Actinius Icarus SoM Non-Secure |
CONFIG_BOARD_ADAFRUIT_FEATHER_M0_BASIC_PROTO
|
Adafruit Feather M0 Basic Proto |
CONFIG_BOARD_ADAFRUIT_FEATHER_NRF52840
|
Adafruit Feather nRF52840 Express |
CONFIG_BOARD_ADAFRUIT_FEATHER_STM32F405
|
Feather STM32F405 Express Board |
CONFIG_BOARD_ADAFRUIT_ITSYBITSY_M4_EXPRESS
|
Adafruit ItsyBitsy M4 Express |
CONFIG_BOARD_ADAFRUIT_TRINKET_M0
|
Adafruit Trinket M0 |
CONFIG_BOARD_ALTERA_MAX10
|
Altera MAX10 Board |
CONFIG_BOARD_ARDUINO_DUE
|
Arduino Due Board |
CONFIG_BOARD_ARDUINO_NANO_33_BLE
|
Arduino Nano 33 BLE board |
CONFIG_BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE
|
Sends the console output over the USB port |
CONFIG_BOARD_ARDUINO_NANO_33_BLE_INIT_SENSORS
|
Initializes the internal I2C sensors on the board |
CONFIG_BOARD_ARDUINO_NANO_33_IOT
|
Arduino Nano 33 IOT |
CONFIG_BOARD_ARDUINO_ZERO
|
Arduino Zero |
CONFIG_BOARD_ARTY_A7_ARM_DESIGNSTART_M1
|
Digilent Arty A7 ARM DesignStart Cortex-M1 |
CONFIG_BOARD_ARTY_A7_ARM_DESIGNSTART_M3
|
Digilent Arty A7 ARM DesignStart Cortex-M3 |
CONFIG_BOARD_ATSAMD20_XPRO
|
SAM D20 Xplained Pro |
CONFIG_BOARD_ATSAMD21_XPRO
|
SAM D21 Xplained Pro |
CONFIG_BOARD_ATSAME54_XPRO
|
SAM E54 Xplained Pro |
CONFIG_BOARD_ATSAMR21_XPRO
|
SAM R21 Xplained Pro |
CONFIG_BOARD_BBC_MICROBIT
|
BBC MICRO:BIT |
CONFIG_BOARD_BBC_MICROBIT_V2
|
BBC MICRO:BIT_V2 |
CONFIG_BOARD_BCM958402M2_A72
|
Broadcom Viper BCM958402M2_A72 |
CONFIG_BOARD_BCM958402M2_M7
|
Broadcom Viper BCM958402M2_M7 |
CONFIG_BOARD_BEAGLEV_STARLIGHT_JH7100
|
BeagleV Starlight JH7100 RISCV64 target |
CONFIG_BOARD_BL5340_DVK_CPUAPP
|
BL5340-DVK (nRF5340) Application MCU |
CONFIG_BOARD_BL5340_DVK_CPUAPP_NS
|
BL5340-DVK (nRF5340) Application MCU non-secure |
CONFIG_BOARD_BL5340_DVK_CPUNET
|
BL5340-DVK (nRF5340) Network MCU |
CONFIG_BOARD_BL652_DVK
|
BL652 DVK |
CONFIG_BOARD_BL653_DVK
|
BL653 DVK |
CONFIG_BOARD_BL654_DVK
|
BL654 DVK |
CONFIG_BOARD_BL654_SENSOR_BOARD
|
BL654 Sensor Board |
CONFIG_BOARD_BLACKPILL_F401CE
|
WeAct Studio Black Pill V3.0+ Board |
CONFIG_BOARD_BLACKPILL_F411CE
|
WeAct Studio Black Pill V2.0+ Board |
CONFIG_BOARD_BLACK_F407VE
|
Black F407VE Development Board |
CONFIG_BOARD_BLACK_F407ZG_PRO
|
Black F407ZG Pro Development Board |
CONFIG_BOARD_BT510
|
BT510 |
CONFIG_BOARD_BT6X0
|
BT6X0 |
CONFIG_BOARD_B_L072Z_LRWAN1
|
STMicroelectronics B-L072Z-LRWAN1 Discovery kit |
CONFIG_BOARD_B_L4S5I_IOT01A
|
STM32L4S5I IOT Discovery kit |
CONFIG_BOARD_CC1352R1_LAUNCHXL
|
TI CC1352R1 LaunchXL |
CONFIG_BOARD_CC1352R_SENSORTAG
|
TI CC1352R SensorTag |
CONFIG_BOARD_CC26X2R1_LAUNCHXL
|
TI CC26x2R1 LaunchXL |
CONFIG_BOARD_CC3220SF_LAUNCHXL
|
TI CC3220SF LAUNCHXL |
CONFIG_BOARD_CC3235SF_LAUNCHXL
|
TI CC3235SF LAUNCHXL |
CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY
|
CCS_VDD power rail init priority |
CONFIG_BOARD_CIRCUITDOJO_FEATHER_NRF9160
|
Circuit Dojo nRF9160 Feather |
CONFIG_BOARD_CIRCUITDOJO_FEATHER_NRF9160_NS
|
Circuit Dojo nRF9160 Feather non-secure |
CONFIG_BOARD_COLIBRI_IMX7D_M4
|
Toradex Colibri iMX7 Dual |
CONFIG_BOARD_CONTEXTELEC_ABC
|
nRF52840 based Advanced BLE Cell |
CONFIG_BOARD_CY8CKIT_062_BLE_M0
|
PSoC6 BLE Pioneer Kit [M0 CPU0] |
CONFIG_BOARD_CY8CKIT_062_BLE_M4
|
PSoC6 BLE Pioneer Kit [M4 CPU1] |
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M0
|
PSoC6 WiFi-BT Pioneer Kit M0 |
CONFIG_BOARD_CY8CKIT_062_WIFI_BT_M4
|
PSoC6 WiFi-BT Pioneer Kit M4 |
CONFIG_BOARD_DECAWAVE_DWM1001_DEV
|
Decawave DWM1001-DEV |
CONFIG_BOARD_DEGU_EVK
|
DEGU_EVK |
CONFIG_BOARD_DEPRECATED_RELEASE
|
|
CONFIG_BOARD_DISCO_L475_IOT1
|
Discovery IoT L475 Development Board |
CONFIG_BOARD_DRAGINO_LSN50
|
Dragino LSN50 Sensor Node |
CONFIG_BOARD_EFM32GG_SLWSTK6121A
|
SiLabs EFM32GG-SLWSTK6121A (WGM160P) |
CONFIG_BOARD_EFM32GG_STK3701A
|
SiLabs EFM32GG-STK3701A (Giant Gecko 11) |
CONFIG_BOARD_EFM32HG_SLSTK3400A
|
SiLabs EFM32HG-SLSTK3400A (Happy Gecko) |
CONFIG_BOARD_EFM32PG_STK3401A
|
SiLabs EFM32PG-STK3401A (Pearl Gecko) |
CONFIG_BOARD_EFM32PG_STK3402A
|
SiLabs EFM32PG-STK3402A (Pearl Gecko) |
CONFIG_BOARD_EFM32PG_STK3402A_JG
|
SiLabs EFM32PG-STK3402A (Jade Gecko) |
CONFIG_BOARD_EFM32WG_STK3800
|
SiLabs EFM32WG-STK3800 (Wonder Gecko) |
CONFIG_BOARD_EFR32MG_SLTB004A
|
SiLabs EFR32MG-SLTB004A (Thunderboard Sense 2) |
CONFIG_BOARD_EFR32_RADIO
|
|
CONFIG_BOARD_EFR32_RADIO_BRD4104A
|
Silicon Labs BRD4104A (Blue Gecko Radio Board) |
CONFIG_BOARD_EFR32_RADIO_BRD4180A
|
Silicon Labs BRD4180A (Mighty Gecko Radio Board) |
CONFIG_BOARD_EFR32_RADIO_BRD4250B
|
Silicon Labs BRD4250B (Flex Gecko Radio Board) |
CONFIG_BOARD_EFR32_RADIO_BRD4255A
|
Silicon Labs BRD4255A (Flex Gecko Radio Board) |
CONFIG_BOARD_EHL_CRB
|
Elkhart Lake CRB |
CONFIG_BOARD_EHL_CRB_SBL
|
Elkhart Lake CRB (with Slim Bootloader) |
CONFIG_BOARD_EMSDP
|
EM Software Development Platform |
CONFIG_BOARD_EM_STARTERKIT
|
ARC EM Starter Kit |
CONFIG_BOARD_EM_STARTERKIT_R22
|
2.2 |
CONFIG_BOARD_EM_STARTERKIT_R23
|
2.3 |
CONFIG_BOARD_ENABLE_CPUNET
|
Enable nRF53 Network MCU |
CONFIG_BOARD_ENABLE_DCDC
|
Enable DCDC mode |
CONFIG_BOARD_ENABLE_DCDC_APP
|
Enable Application MCU DCDC converter |
CONFIG_BOARD_ENABLE_DCDC_HV
|
Enable High Voltage DCDC converter |
CONFIG_BOARD_ENABLE_DCDC_NET
|
Enable Network MCU DCDC converter |
CONFIG_BOARD_ESP32
|
ESP32 Development Board |
CONFIG_BOARD_ESP32C3_DEVKITM
|
ESP32C3 Devkit-M Board |
CONFIG_BOARD_FAZE
|
Seagate FireCuda Gaming SSD (FaZe) |
CONFIG_BOARD_FRDM_K22F
|
NXP FRDM-K22F |
CONFIG_BOARD_FRDM_K64F
|
Freescale FRDM-K64F |
CONFIG_BOARD_FRDM_K82F
|
NXP FRDM-K82F |
CONFIG_BOARD_FRDM_KL25Z
|
NXP FRDM-KL25Z |
CONFIG_BOARD_FRDM_KW41Z
|
NXP FRDM-KW41Z |
CONFIG_BOARD_FVP_BASER_AEMV8R
|
FVP BaseR AEMv8R simulation board |
CONFIG_BOARD_FVP_BASE_REVC_2XAEMV8A
|
FVP Base RevC AEMv8A simulation board |
CONFIG_BOARD_GENERIC_LEON3
|
Generic LEON3 system |
CONFIG_BOARD_GOOGLE_KUKUI
|
Google Kukui EC |
CONFIG_BOARD_GR716A_MINI
|
GR716-MINI Development Board |
CONFIG_BOARD_HAS_NRF5_BOOTLOADER
|
Board has nRF5 bootloader |
CONFIG_BOARD_HAS_TIMING_FUNCTIONS
|
|
CONFIG_BOARD_HEXIWEAR_K64
|
NXP Hexiwear K64 |
CONFIG_BOARD_HEXIWEAR_KW40Z
|
Hexiwear KW40Z |
CONFIG_BOARD_HIFIVE1
|
HiFive1 target |
CONFIG_BOARD_HIFIVE1_REVB
|
HiFive1 Rev B target |
CONFIG_BOARD_HOLYIOT_YJ16019
|
Holyiot YJ-16019 |
CONFIG_BOARD_HSDK
|
ARC HS Development Kit |
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL
|
|
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_DBG
|
Debug |
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_ERR
|
Error |
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_INF
|
Info |
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_OFF
|
Off |
CONFIG_BOARD_ICARUS_BEE_LOG_LEVEL_WRN
|
Warning |
CONFIG_BOARD_ICARUS_LOG_LEVEL
|
|
CONFIG_BOARD_ICARUS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BOARD_ICARUS_LOG_LEVEL_ERR
|
Error |
CONFIG_BOARD_ICARUS_LOG_LEVEL_INF
|
Info |
CONFIG_BOARD_ICARUS_LOG_LEVEL_OFF
|
Off |
CONFIG_BOARD_ICARUS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL
|
|
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_DBG
|
Debug |
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_ERR
|
Error |
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_INF
|
Info |
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_OFF
|
Off |
CONFIG_BOARD_ICARUS_SOM_LOG_LEVEL_WRN
|
Warning |
CONFIG_BOARD_INIT_PRIORITY
|
Board initialization priority |
CONFIG_BOARD_INTEL_ADSP_CAVS15
|
Intel ADSP CAVS 1.5 |
CONFIG_BOARD_INTEL_ADSP_CAVS18
|
Intel ADSP CAVS 1.8 |
CONFIG_BOARD_INTEL_ADSP_CAVS20
|
Intel ADSP CAVS 2.0 |
CONFIG_BOARD_INTEL_ADSP_CAVS25
|
Intel ADSP CAVS 2.5 |
CONFIG_BOARD_INTEL_S1000_CRB
|
Xtensa on Intel_S1000 |
CONFIG_BOARD_IOTDK
|
ARC IoT Development Kit |
CONFIG_BOARD_IP_K66F
|
Segger IP-K66F |
CONFIG_BOARD_IT8XXX2_EVB
|
IT8XXX2 EV-board |
CONFIG_BOARD_LITEX_VEXRISCV
|
Board with LiteX/VexRiscV CPU |
CONFIG_BOARD_LORA_E5_DEV_BOARD
|
LoRa E5 Development Board |
CONFIG_BOARD_LPCXPRESSO11U68
|
NXP LPCXPRESSO-11U68 |
CONFIG_BOARD_LPCXPRESSO54114_M0
|
NXP LPCXPRESSO-54114 M0 |
CONFIG_BOARD_LPCXPRESSO54114_M4
|
NXP LPCXPRESSO-54114 M4 |
CONFIG_BOARD_LPCXPRESSO55S16
|
NXP LPCXPRESSO-55S16 |
CONFIG_BOARD_LPCXPRESSO55S28
|
NXP LPCXPRESSO-55S28 |
CONFIG_BOARD_LPCXPRESSO55S69_CPU0
|
NXP LPCXPRESSO-55S69 [CPU0] |
CONFIG_BOARD_LPCXPRESSO55S69_CPU1
|
NXP LPCXPRESSO-55S69 [CPU1] |
CONFIG_BOARD_M2GL025_MIV
|
Microsemi M2GL025 IGLOO2 dev board with Mi-V CPU |
CONFIG_BOARD_MEC1501MODULAR_ASSY6885
|
Microchip MEC1501 Modular ASSY 6885 Development board |
CONFIG_BOARD_MEC15XXEVB_ASSY6853
|
Microchip MEC15XX EVB ASSY 6853 Development board |
CONFIG_BOARD_MEC172XEVB_ASSY6906
|
Microchip MEC172X EVB ASSY 6906 Development board |
CONFIG_BOARD_MEC2016EVB_ASSY6797
|
Microchip MEC2016 EVB ASSY 6797 Development board |
CONFIG_BOARD_MERCURY_XU
|
Mercury XU Board |
CONFIG_BOARD_MIKROE_CLICKER_2
|
MikroE Clicker 2 for STM32 board |
CONFIG_BOARD_MIKROE_MINI_M4_FOR_STM32
|
Mikroe MINI-M4 for STM32 Board |
CONFIG_BOARD_MIMX8MM_EVK
|
NXP i.MX8M Mini EVK |
CONFIG_BOARD_MIMXRT1010_EVK
|
NXP MIMXRT1010-EVK |
CONFIG_BOARD_MIMXRT1015_EVK
|
NXP MIMXRT1015-EVK |
CONFIG_BOARD_MIMXRT1020_EVK
|
NXP MIMXRT1020-EVK |
CONFIG_BOARD_MIMXRT1024_EVK
|
NXP MIMXRT1024-EVK |
CONFIG_BOARD_MIMXRT1050_EVK
|
NXP MIMXRT1050-EVK |
CONFIG_BOARD_MIMXRT1050_EVK_QSPI
|
NXP MIMXRT1050-EVK-QSPI |
CONFIG_BOARD_MIMXRT1060_EVK
|
NXP MIMXRT1060-EVK |
CONFIG_BOARD_MIMXRT1060_EVK_HYPERFLASH
|
NXP MIMXRT1060-EVK-HYPERFLASH |
CONFIG_BOARD_MIMXRT1064_EVK
|
NXP MIMXRT1064-EVK |
CONFIG_BOARD_MIMXRT1170_EVK_CM4
|
NXP MIMXRT1170-EVK CM4 |
CONFIG_BOARD_MIMXRT1170_EVK_CM7
|
NXP MIMXRT1170-EVK CM7 |
CONFIG_BOARD_MIMXRT685_EVK
|
NXP MIMXRT685-EVK |
CONFIG_BOARD_MM_SWIFTIO
|
MM MM-SWIFTIO |
CONFIG_BOARD_MPS2_AN385
|
ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385) |
CONFIG_BOARD_MPS2_AN521_CPU0
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0) |
CONFIG_BOARD_MPS2_AN521_CPU0_NS
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0 Non-Secure) |
CONFIG_BOARD_MPS2_AN521_CPU1
|
ARM Cortex-M33 SMM on V2M-MPS2 (AN521) CPU1 |
CONFIG_BOARD_MPS3_AN547
|
Arm Cortex-M55 (Corstone-300, SSE-300 w/Ethos-U55) on MPS3 (AN547) |
CONFIG_BOARD_MSP_EXP432P401R_LAUNCHXL
|
TI MSP-EXP432P401R LAUNCHXL |
CONFIG_BOARD_MUSCA_B1
|
ARM Cortex-M33 SMM on V2M-MUSCA |
CONFIG_BOARD_MUSCA_S1
|
ARM Cortex-M33 SMM on V2M-MUSCA-S1 |
CONFIG_BOARD_NATIVE_POSIX
|
|
CONFIG_BOARD_NATIVE_POSIX_32BIT
|
Native POSIX for 32-bit host |
CONFIG_BOARD_NATIVE_POSIX_64BIT
|
Native POSIX for 64-bit host |
CONFIG_BOARD_NPCX7M6FB_EVB
|
Nuvoton NPCX7M6FB EVB Development board |
CONFIG_BOARD_NPCX9M6F_EVB
|
Nuvoton NPCX9M6F EVB Development board |
CONFIG_BOARD_NRF21540DK_NRF52840
|
nRF21540 DK NRF52840 |
CONFIG_BOARD_NRF51DK_NRF51422
|
nRF51 DK NRF51422 |
CONFIG_BOARD_NRF51DONGLE_NRF51422
|
nRF51 Dongle NRF51422 |
CONFIG_BOARD_NRF51_BLE400
|
nRF51 BLE400 |
CONFIG_BOARD_NRF51_BLENANO
|
nRF51 BLENANO |
CONFIG_BOARD_NRF51_VBLUNO51
|
nRF51 VBLUno51 BLE |
CONFIG_BOARD_NRF52832_MDK
|
nRF52832-MDK |
CONFIG_BOARD_NRF52833DK_NRF52820
|
nRF52833 DK NRF52820 |
CONFIG_BOARD_NRF52833DK_NRF52833
|
NRF52833 DK NRF52833 |
CONFIG_BOARD_NRF52840DK_NRF52811
|
nRF52840 DK NRF52811 |
CONFIG_BOARD_NRF52840DK_NRF52840
|
nRF52840 DK NRF52840 |
CONFIG_BOARD_NRF52840DONGLE_NRF52840
|
nRF52840 DONGLE NRF52840 |
CONFIG_BOARD_NRF52840_BLIP
|
Electronut Labs Blip |
CONFIG_BOARD_NRF52840_MDK
|
NRF52840-MDK |
CONFIG_BOARD_NRF52840_PAPYR
|
NRF52840 PAPYR |
CONFIG_BOARD_NRF52DK_NRF52805
|
nRF52 DK NRF52805 |
CONFIG_BOARD_NRF52DK_NRF52810
|
nRF52 DK NRF52810 |
CONFIG_BOARD_NRF52DK_NRF52832
|
nRF52 DK NRF52832 |
CONFIG_BOARD_NRF52_ADAFRUIT_FEATHER
|
nRF52 ADAFRUIT FEATHER |
CONFIG_BOARD_NRF52_BLENANO2
|
nRF52 BLENANO2 |
CONFIG_BOARD_NRF52_BSIM
|
NRF52 simulation model |
CONFIG_BOARD_NRF52_SPARKFUN
|
nRF52 SPARKFUN |
CONFIG_BOARD_NRF52_VBLUNO52
|
nRF52 VBLUno52 |
CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP
|
nRF5340 DK nRF5340 Application MCU |
CONFIG_BOARD_NRF5340DK_NRF5340_CPUAPP_NS
|
nRF5340 DK nRF5340 Application MCU non-secure |
CONFIG_BOARD_NRF5340DK_NRF5340_CPUNET
|
nRF5340 DK NRF5340 Network MCU |
CONFIG_BOARD_NRF9160DK_LOG_LEVEL
|
|
CONFIG_BOARD_NRF9160DK_LOG_LEVEL_DBG
|
Debug |
CONFIG_BOARD_NRF9160DK_LOG_LEVEL_ERR
|
Error |
CONFIG_BOARD_NRF9160DK_LOG_LEVEL_INF
|
Info |
CONFIG_BOARD_NRF9160DK_LOG_LEVEL_OFF
|
Off |
CONFIG_BOARD_NRF9160DK_LOG_LEVEL_WRN
|
Warning |
CONFIG_BOARD_NRF9160DK_NRF52840
|
NRF9160 DK NRF52840 |
CONFIG_BOARD_NRF9160DK_NRF9160
|
nRF9160 DK NRF9160 |
CONFIG_BOARD_NRF9160DK_NRF9160_NS
|
nRF9160 DK NRF9160 non-secure |
CONFIG_BOARD_NRF9160_INNBLUE21
|
nRF9160 innblue v2.1 |
CONFIG_BOARD_NRF9160_INNBLUE21_NS
|
nRF9160 innblue v2.1 non-secure |
CONFIG_BOARD_NRF9160_INNBLUE22
|
nRF9160 innblue v2.2 |
CONFIG_BOARD_NRF9160_INNBLUE22_NS
|
nRF9160 innblue V2.2 non-secure |
CONFIG_BOARD_NSIM
|
ARC nSIM simulator |
CONFIG_BOARD_NUCLEO_F030R8
|
NUCLEO-64 F030R8 Development Board |
CONFIG_BOARD_NUCLEO_F031K6
|
NUCLEO-32 F031K6 Development Board |
CONFIG_BOARD_NUCLEO_F070RB
|
NUCLEO-64 F070RB Development Board |
CONFIG_BOARD_NUCLEO_F091RC
|
NUCLEO-64 F091RC Development Board |
CONFIG_BOARD_NUCLEO_F103RB
|
NUCLEO-64 F103RB Development Board |
CONFIG_BOARD_NUCLEO_F207ZG
|
NUCLEO-144 F207ZG Development Board |
CONFIG_BOARD_NUCLEO_F302R8
|
NUCLEO-64 F302R8 Development Board |
CONFIG_BOARD_NUCLEO_F303K8
|
NUCLEO-32 F303K8 Development Board |
CONFIG_BOARD_NUCLEO_F303RE
|
NUCLEO-64 F303RE Development Board |
CONFIG_BOARD_NUCLEO_F334R8
|
NUCLEO-64 F334R8 Development Board |
CONFIG_BOARD_NUCLEO_F401RE
|
NUCLEO-64 F401RE Development Board |
CONFIG_BOARD_NUCLEO_F410RB
|
Nucleo F410RB Development Board |
CONFIG_BOARD_NUCLEO_F411RE
|
NUCLEO-64 F411RE Development Board |
CONFIG_BOARD_NUCLEO_F412ZG
|
NUCLEO-144 F412ZG Development Board |
CONFIG_BOARD_NUCLEO_F413ZH
|
NUCLEO-144 F413ZH Development Board |
CONFIG_BOARD_NUCLEO_F429ZI
|
NUCLEO-144 F429ZI Development Board |
CONFIG_BOARD_NUCLEO_F446RE
|
Nucleo F446RE Development Board |
CONFIG_BOARD_NUCLEO_F746ZG
|
Nucleo F746ZG Development Board |
CONFIG_BOARD_NUCLEO_F756ZG
|
Nucleo F756ZG Development Board |
CONFIG_BOARD_NUCLEO_F767ZI
|
Nucleo F767ZI Development Board |
CONFIG_BOARD_NUCLEO_G071RB
|
NUCLEO-64 G071RB Development Board |
CONFIG_BOARD_NUCLEO_G0B1RE
|
NUCLEO-64 G0B1RE Development Board |
CONFIG_BOARD_NUCLEO_G431RB
|
Nucleo G431RB Development Board |
CONFIG_BOARD_NUCLEO_G474RE
|
Nucleo G474RE Development Board |
CONFIG_BOARD_NUCLEO_H723ZG
|
NUCLEO-H723ZG Development Board |
CONFIG_BOARD_NUCLEO_H743ZI
|
Nucleo H743ZI Development Board |
CONFIG_BOARD_NUCLEO_H745ZI_Q_M4
|
NUCLEO-H745ZI-Q Development Board |
CONFIG_BOARD_NUCLEO_H745ZI_Q_M7
|
NUCLEO-H745ZI-Q Development Board |
CONFIG_BOARD_NUCLEO_H753ZI
|
Nucleo H753ZI Development Board |
CONFIG_BOARD_NUCLEO_L011K4
|
NUCLEO-32 L011K4 Development Board |
CONFIG_BOARD_NUCLEO_L031K6
|
NUCLEO-32 L031K6 Development Board |
CONFIG_BOARD_NUCLEO_L053R8
|
NUCLEO-64 L053R8 Development Board |
CONFIG_BOARD_NUCLEO_L073RZ
|
NUCLEO-64 L073RZ Development Board |
CONFIG_BOARD_NUCLEO_L152RE
|
NUCLEO-64 L152RE Development Board |
CONFIG_BOARD_NUCLEO_L412RB_P
|
Nucleo L412RB-P Development Board |
CONFIG_BOARD_NUCLEO_L432KC
|
Nucleo L432KC Development Board |
CONFIG_BOARD_NUCLEO_L433RC_P
|
Nucleo L433RC-P Development Board |
CONFIG_BOARD_NUCLEO_L452RE
|
Nucleo L452RE Development Board |
CONFIG_BOARD_NUCLEO_L452RE_P
|
Nucleo L452RE-P Development Board |
CONFIG_BOARD_NUCLEO_L476RG
|
Nucleo L476RG Development Board |
CONFIG_BOARD_NUCLEO_L496ZG
|
Nucleo L496ZG Development Board |
CONFIG_BOARD_NUCLEO_L4R5ZI
|
Nucleo L4R5ZI Development Board |
CONFIG_BOARD_NUCLEO_L552ZE_Q
|
Nucleo L552ZE Q Development Board |
CONFIG_BOARD_NUCLEO_WB55RG
|
Nucleo WB55RG Development Board |
CONFIG_BOARD_NUCLEO_WL55JC
|
Nucleo WL55JC Development Board |
CONFIG_BOARD_NUVOTON_PFM_M487
|
NUVOTON PFM MP487 Development Board |
CONFIG_BOARD_NXP_LS1046ARDB
|
NXP Layerscape ls1046ardb |
CONFIG_BOARD_ODROID_GO
|
ODROID-GO Game Kit |
CONFIG_BOARD_OLIMEXINO_STM32
|
OLIMEXINO-STM32 Development Board |
CONFIG_BOARD_OLIMEX_STM32_E407
|
OLIMEX-STM32-E407 Development Board |
CONFIG_BOARD_OLIMEX_STM32_H103
|
OLIMEX-STM32-H103 Development Board |
CONFIG_BOARD_OLIMEX_STM32_H407
|
OLIMEX-STM32-H407 Development Board |
CONFIG_BOARD_OLIMEX_STM32_P405
|
OLIMEX-STM32-P405 Development Board |
CONFIG_BOARD_PARTICLE_ARGON
|
Particle Argon Board |
CONFIG_BOARD_PARTICLE_BORON
|
Particle Boron Board |
CONFIG_BOARD_PARTICLE_XENON
|
Particle Xenon Board |
CONFIG_BOARD_PICO_PI_M4
|
Pico-PI iMX7D Dual |
CONFIG_BOARD_PINETIME_DEVKIT0
|
PineTime DevKit0 |
CONFIG_BOARD_PINNACLE_100_DVK
|
Pinnacle 100 DVK |
CONFIG_BOARD_QEMU_ARC
|
ARC QEMU for EM & HS cores |
CONFIG_BOARD_QEMU_CORTEX_A53
|
Cortex-A53 Emulation (QEMU) |
CONFIG_BOARD_QEMU_CORTEX_M0
|
Cortex-M0 Emulation (QEMU) |
CONFIG_BOARD_QEMU_CORTEX_M3
|
Cortex-M3 Emulation (QEMU) |
CONFIG_BOARD_QEMU_CORTEX_R5
|
Cortex-R5 Emulation (QEMU) |
CONFIG_BOARD_QEMU_LEON3
|
QEMU LEON3 target |
CONFIG_BOARD_QEMU_NIOS2
|
QEMU NIOS II target |
CONFIG_BOARD_QEMU_RISCV32
|
QEMU RISCV32 target |
CONFIG_BOARD_QEMU_RISCV32_XIP
|
QEMU RISCV32 XIP target |
CONFIG_BOARD_QEMU_RISCV64
|
QEMU RISCV64 target |
CONFIG_BOARD_QEMU_X86
|
QEMU x86 |
CONFIG_BOARD_QEMU_X86_64
|
QEMU x86_64 |
CONFIG_BOARD_QEMU_X86_LAKEMONT
|
QEMU x86 (Lakemont) |
CONFIG_BOARD_QEMU_XTENSA
|
Xtensa emulation using QEMU |
CONFIG_BOARD_QUICK_FEATHER
|
QuickLogic Quick Feather target |
CONFIG_BOARD_RAK4631_NRF52840
|
RAK4631 DK NRF52840 |
CONFIG_BOARD_RAK5010_NRF52840
|
RAK5010 DK NRF52840 |
CONFIG_BOARD_RCAR_H3ULCB_CR7
|
Cortex-R7 for Renesas H3ULCB |
CONFIG_BOARD_REEL_BOARD
|
reel board equipped with GDEH0213B1 display |
CONFIG_BOARD_REEL_BOARD_V2
|
reel board equipped with GDEH0213B72 display |
CONFIG_BOARD_RONOTH_LODEV
|
Ronoth LoDev |
CONFIG_BOARD_RUUVI_RUUVITAG
|
Ruuvi-RuuviTag |
CONFIG_BOARD_RV32M1_VEGA
|
RV32M1 RISC-V cores |
CONFIG_BOARD_SAM4E_XPRO
|
Atmel SAM4E Xplained Pro |
CONFIG_BOARD_SAM4L_EK
|
Atmel SAM4L-EK |
CONFIG_BOARD_SAM4S_XPLAINED
|
Atmel SAM4S Xplained |
CONFIG_BOARD_SAM_E70_XPLAINED
|
Atmel SMART SAM E70 Xplained Board |
CONFIG_BOARD_SAM_V71_XULT
|
Atmel SMART SAM V71 Xplained Ultra Board |
CONFIG_BOARD_SEEEDUINO_XIAO
|
Seeeduino XIAO |
CONFIG_BOARD_SEGGER_TRB_STM32F407
|
SEGGER STM32F407 Trace Reference Board |
CONFIG_BOARD_SELECT_SIM_EXTERNAL
|
Use external SIM |
CONFIG_BOARD_SENSORTILE_BOX
|
SensorTile.box Development Board |
CONFIG_BOARD_SERPENTE
|
Serpente |
CONFIG_BOARD_SPARKFUN_THING_PLUS_NRF9160
|
Sparkfun nRF9160 Thing Plus |
CONFIG_BOARD_SPARKFUN_THING_PLUS_NRF9160_NS
|
Sparkfun nRF9160 Thing Plus non-secure |
CONFIG_BOARD_STEVAL_FCU001V1
|
STM32 Flight Controller Unit |
CONFIG_BOARD_STM3210C_EVAL
|
STM3210C-EVAL Evaluation Board |
CONFIG_BOARD_STM32373C_EVAL
|
STM32373C_EVAL Evaluation Board |
CONFIG_BOARD_STM32F030_DEMO
|
STM32F030 DEMO Board |
CONFIG_BOARD_STM32F072B_DISCO
|
STM32F072B-DISCO Development Board |
CONFIG_BOARD_STM32F072_EVAL
|
STM32F072-EVAL Development Board |
CONFIG_BOARD_STM32F0_DISCO
|
STM32F0DISCOVERY Development Board |
CONFIG_BOARD_STM32F103_MINI
|
STM32F103RCT6 Mini Board |
CONFIG_BOARD_STM32F3_DISCO
|
STM32F3DISCOVERY Development Board |
CONFIG_BOARD_STM32F411E_DISCO
|
STM32F411E-DISCO Development Board |
CONFIG_BOARD_STM32F412G_DISCO
|
STM32F412G-DISCO Development Board |
CONFIG_BOARD_STM32F429I_DISC1
|
STM32F429I-DISC1 Development Board |
CONFIG_BOARD_STM32F469I_DISCO
|
STM32F469I-DISCO Development Board |
CONFIG_BOARD_STM32F4_DISCO
|
STM32F4DISCOVERY Development Board |
CONFIG_BOARD_STM32F723E_DISCO
|
STM32F723E Discovery Development Board |
CONFIG_BOARD_STM32F746G_DISCO
|
STM32F746G Discovery Development Board |
CONFIG_BOARD_STM32F769I_DISCO
|
STM32F769I Discovery Development Board |
CONFIG_BOARD_STM32G0316_DISCO
|
STM32G0316 Discovery Development Board |
CONFIG_BOARD_STM32G071B_DISCO
|
STM32G071B Discovery Board |
CONFIG_BOARD_STM32H735G_DISCO
|
STM32H735G Discovery Development Board |
CONFIG_BOARD_STM32H747I_DISCO_M4
|
STM32H747I Discovery Development Board |
CONFIG_BOARD_STM32H747I_DISCO_M7
|
STM32H747I Discovery Development Board |
CONFIG_BOARD_STM32L1_DISCO
|
STM32L1DISCOVERY Development Board |
CONFIG_BOARD_STM32L476G_DISCO
|
STM32L476G Discovery Development Board |
CONFIG_BOARD_STM32L496G_DISCO
|
STM32L496G Discovery Development Board |
CONFIG_BOARD_STM32L562E_DK
|
STM32L562E-DK Discovery Development Board |
CONFIG_BOARD_STM32MP157C_DK2
|
STM32MP157C Discovery Development 2 Board |
CONFIG_BOARD_STM32VL_DISCO
|
STM32VLDISCOVERY Development Board |
CONFIG_BOARD_STM32_MIN_DEV_BLACK
|
STM32 Minimum Development Board (Black) |
CONFIG_BOARD_STM32_MIN_DEV_BLUE
|
STM32 Minimum Development Board (Blue) |
CONFIG_BOARD_TEENSY40
|
PJRC TEENSY40 |
CONFIG_BOARD_TEENSY41
|
PJRC TEENSY41 |
CONFIG_BOARD_THINGY52_NRF52832
|
Thingy52 NRF52832 |
CONFIG_BOARD_THINGY53_NRF5340_CPUAPP
|
Thingy53 nRF5340 Application MCU |
CONFIG_BOARD_THINGY53_NRF5340_CPUAPP_NS
|
Thingy53 nRF5340 Application MCU non-secure |
CONFIG_BOARD_THINGY53_NRF5340_CPUNET
|
Thingy53 nRF5340 Network MCU |
CONFIG_BOARD_TLSR9518ADK80D
|
Telink B91 Platform |
CONFIG_BOARD_TWR_KE18F
|
NXP TWR-KE18F |
CONFIG_BOARD_TWR_KE18F_FLEXIO_CLKOUT
|
Enable CLKOUT signal on FlexIO header |
CONFIG_BOARD_TWR_KE18F_SPI_0_PCS2
|
Use PTE6 as dedicated SPI_0 PCS2 chip select |
CONFIG_BOARD_TWR_KE18F_SPI_1_PCS0
|
Use PTD3 as dedicated SPI_1 PCS0 chip select |
CONFIG_BOARD_TWR_KE18F_SPI_1_PCS2
|
Use PTA16 as dedicated SPI_1 PCS2 chip select |
CONFIG_BOARD_TWR_KV58F220M
|
NXP TWR-KV58F220M |
CONFIG_BOARD_UBX_BMD300EVAL_NRF52832
|
u-blox BMD-300-EVAL |
CONFIG_BOARD_UBX_BMD330EVAL_NRF52810
|
u-blox BMD-330-EVAL |
CONFIG_BOARD_UBX_BMD340EVAL_NRF52840
|
u-blox BMD-340-EVAL |
CONFIG_BOARD_UBX_BMD345EVAL_NRF52840
|
u-blox BMD-345-EVAL |
CONFIG_BOARD_UBX_BMD360EVAL_NRF52811
|
u-blox BMD-360-EVAL |
CONFIG_BOARD_UBX_BMD380EVAL_NRF52840
|
u-blox BMD-380-EVAL |
CONFIG_BOARD_UBX_EVKANNAB1_NRF52832
|
u-blox EVK-ANNA-B1 |
CONFIG_BOARD_UBX_EVKNINAB1_NRF52832
|
u-blox EVK-NINA-B1 |
CONFIG_BOARD_UBX_EVKNINAB3_NRF52840
|
u-blox EVK-NINA-B3 |
CONFIG_BOARD_UBX_EVKNINAB4_NRF52833
|
u-blox EVK-NINA-B4 |
CONFIG_BOARD_UDOO_NEO_FULL_M4
|
UDOO Neo Full |
CONFIG_BOARD_UP_SQUARED
|
UP Squared (x86_64) |
CONFIG_BOARD_USB_KW24D512
|
NXP USB-KW24D512 |
CONFIG_BOARD_V2M_BEETLE
|
ARM V2M Beetle Board |
CONFIG_BOARD_VALKYRIE_BCM958401M2
|
Broadcom Valkyrie BCM958401M2 |
CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY
|
VDD power rail init priority |
CONFIG_BOARD_WARP7_M4
|
WaRP7 iMX7 Solo |
CONFIG_BOARD_WAVESHARE_OPEN103Z
|
Waveshare OPEN103Z Development Board |
CONFIG_BOARD_XENVM
|
Xen Virtual Machine |
CONFIG_BOARD_XMC45_RELAX_KIT
|
Infineon Relax Kit |
CONFIG_BOARD_XT_SIM
|
Xtensa Development ISS |
CONFIG_BOARD_XT_SIM_INTEL_S1000
|
Xtensa Development ISS |
CONFIG_BOOTLOADER_BOSSA
|
BOSSA bootloader support |
CONFIG_BOOTLOADER_BOSSA_ADAFRUIT_UF2
|
Adafruit UF2 |
CONFIG_BOOTLOADER_BOSSA_ARDUINO
|
Arduino |
CONFIG_BOOTLOADER_BOSSA_DEVICE_NAME
|
BOSSA CDC ACM device name |
CONFIG_BOOTLOADER_BOSSA_LEGACY
|
Legacy |
CONFIG_BOOTLOADER_ESP_IDF
|
Use esp-idf 2nd stage bootloader |
CONFIG_BOOTLOADER_MCUBOOT
|
MCUboot bootloader support |
CONFIG_BOOTLOADER_SRAM_SIZE
|
SRAM reserved for bootloader |
CONFIG_BOOT_BANNER
|
Boot banner |
CONFIG_BOOT_DELAY
|
Boot delay in milliseconds |
CONFIG_BOOT_FLEXSPI_NAND
|
FlexSPI serial NAND |
CONFIG_BOOT_FLEXSPI_NOR
|
FlexSPI serial NOR |
CONFIG_BOOT_SEMC_NAND
|
SEMC parallel NAND |
CONFIG_BOOT_SEMC_NOR
|
SEMC parallel NOR |
CONFIG_BOUNDS_CHECK_BYPASS_MITIGATION
|
Enable bounds check bypass mitigations for speculative execution |
CONFIG_BQ274XX
|
BQ274xx Fuel Gauge |
CONFIG_BQ274XX_LAZY_CONFIGURE
|
Configure on first usage instead of init |
CONFIG_BT
|
Bluetooth |
CONFIG_BT_A2DP
|
Bluetooth A2DP Profile [EXPERIMENTAL] |
CONFIG_BT_AICS
|
|
CONFIG_BT_AICS_CLIENT
|
|
CONFIG_BT_AICS_CLIENT_MAX_INSTANCE_COUNT
|
Audio Input Control Service client max instance count |
CONFIG_BT_AICS_MAX_INPUT_DESCRIPTION_SIZE
|
Audio Input Control Service max input description size |
CONFIG_BT_AICS_MAX_INSTANCE_COUNT
|
Audio Input Control Service max instance count |
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL
|
|
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_ALEXA_GADGETS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL
|
|
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_INF
|
Info |
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_ALEXA_GADGETS_PROFILE_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL
|
|
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_ANCS_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_ASSERT
|
Custom Bluetooth assert implementation |
CONFIG_BT_ASSERT_PANIC
|
Use k_panic() instead of k_oops() |
CONFIG_BT_ASSERT_VERBOSE
|
Print out an assert string when using BT_ASSERT |
CONFIG_BT_ATT_ENFORCE_FLOW
|
Enforce strict flow control semantics for incoming PDUs |
CONFIG_BT_ATT_PREPARE_COUNT
|
Number of ATT prepare write buffers |
CONFIG_BT_AUDIO
|
Bluetooth Audio support [Experimental] |
CONFIG_BT_AUDIO_BROADCAST
|
Bluetooth Broadcast Audio Support |
CONFIG_BT_AUDIO_DEBUG
|
Enable debug logs |
CONFIG_BT_AUDIO_UNICAST
|
Bluetooth Unicast Audio Support |
CONFIG_BT_AUTO_DATA_LEN_UPDATE
|
Auto-initiate Data Length Update procedure |
CONFIG_BT_AUTO_PHY_UPDATE
|
Auto-initiate PHY Update Procedure |
CONFIG_BT_AVDTP
|
Bluetooth AVDTP protocol support [EXPERIMENTAL] |
CONFIG_BT_BACKGROUND_SCAN_INTERVAL
|
Scan interval used for background scanning in 0.625 ms units |
CONFIG_BT_BACKGROUND_SCAN_WINDOW
|
Scan window used for background scanning in 0.625 ms units |
CONFIG_BT_BAS
|
Enable GATT Battery service |
CONFIG_BT_BAS_CLIENT_LOG_LEVEL
|
|
CONFIG_BT_BAS_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_BAS_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_BAS_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_BAS_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_BAS_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_BAS_LOG_LEVEL
|
Battery service log level |
CONFIG_BT_BLUENRG_ACI
|
Enable ACI message with with BlueNRG-based devices |
CONFIG_BT_BMS_LOG_LEVEL
|
|
CONFIG_BT_BMS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_BMS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_BMS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_BMS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_BMS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_BONDABLE
|
Bondable Mode |
CONFIG_BT_BONDING_REQUIRED
|
Always require bonding |
CONFIG_BT_BREDR
|
Bluetooth BR/EDR support [EXPERIMENTAL] |
CONFIG_BT_BROADCASTER
|
Broadcaster Role support |
CONFIG_BT_BUF_ACL_RX_COUNT
|
Number of incoming ACL data buffers |
CONFIG_BT_BUF_ACL_RX_SIZE
|
Maximum supported ACL size for incoming data |
CONFIG_BT_BUF_ACL_TX_COUNT
|
Number of outgoing ACL data buffers |
CONFIG_BT_BUF_ACL_TX_SIZE
|
Maximum supported ACL size for outgoing data |
CONFIG_BT_BUF_CMD_TX_COUNT
|
Number of HCI command buffers |
CONFIG_BT_BUF_CMD_TX_SIZE
|
Maximum support HCI Command buffer length |
CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT
|
Number of discardable HCI Event buffers |
CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE
|
Maximum supported discardable HCI Event buffer length |
CONFIG_BT_BUF_EVT_RX_COUNT
|
Number of HCI Event buffers |
CONFIG_BT_BUF_EVT_RX_SIZE
|
Maximum supported HCI Event buffer length |
CONFIG_BT_CENTRAL
|
Central Role support |
CONFIG_BT_COMPANY_ID
|
Company Id |
CONFIG_BT_CONN
|
|
CONFIG_BT_CONN_CTX_LOG_LEVEL
|
|
CONFIG_BT_CONN_CTX_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_CONN_CTX_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_CONN_CTX_LOG_LEVEL_INF
|
Info |
CONFIG_BT_CONN_CTX_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_CONN_CTX_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_CONN_DISABLE_SECURITY
|
Disable security |
CONFIG_BT_CONN_PARAM_UPDATE_TIMEOUT
|
Peripheral connection parameter update timeout in milliseconds |
CONFIG_BT_CONN_TX_MAX
|
Maximum number of pending TX buffers with a callback |
CONFIG_BT_CREATE_CONN_TIMEOUT
|
Timeout for pending LE Create Connection command in seconds |
CONFIG_BT_CTLR
|
Bluetooth Controller |
CONFIG_BT_CTLR_ADVANCED_FEATURES
|
Show advanced features |
CONFIG_BT_CTLR_ADV_AUX_SET
|
LE Extended Advertising Auxiliary Sets |
CONFIG_BT_CTLR_ADV_DATA_BUF_MAX
|
Advertising Data Maximum Buffers |
CONFIG_BT_CTLR_ADV_DATA_LEN_MAX
|
Maximum Advertising Data Length |
CONFIG_BT_CTLR_ADV_EXT
|
LE Advertising Extensions |
CONFIG_BT_CTLR_ADV_EXT_PDU_EXTRA_DATA_MEMORY
|
|
CONFIG_BT_CTLR_ADV_EXT_SUPPORT
|
|
CONFIG_BT_CTLR_ADV_INDICATION
|
Advertisement indications |
CONFIG_BT_CTLR_ADV_ISO
|
LE Broadcast Isochronous Channel advertising |
CONFIG_BT_CTLR_ADV_ISO_PDU_LEN_MAX
|
Maximum Broadcast Isochronous Channel PDU Length |
CONFIG_BT_CTLR_ADV_ISO_SET
|
LE Isochronous Channel advertising sets |
CONFIG_BT_CTLR_ADV_ISO_SUPPORT
|
|
CONFIG_BT_CTLR_ADV_PDU_LINK
|
Enable linking of advertising PDU trains |
CONFIG_BT_CTLR_ADV_PERIODIC
|
LE Periodic Advertising in Advertising State |
CONFIG_BT_CTLR_ADV_PERIODIC_SUPPORT
|
|
CONFIG_BT_CTLR_ADV_SET
|
LE Advertising Extensions Sets |
CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK
|
Enable back-to-back transmission of periodic advertising trains |
CONFIG_BT_CTLR_ADV_SYNC_PDU_BACK2BACK_AFS
|
AUX Frame Space for back-to-back transmission of periodic advertising trains |
CONFIG_BT_CTLR_ADV_SYNC_SET
|
LE Periodic Advertising Sets |
CONFIG_BT_CTLR_AD_DATA_BACKUP
|
Enable Legacy AD Data backup |
CONFIG_BT_CTLR_ALLOW_SAME_PEER_CONN
|
Allow connection requests from same peer |
CONFIG_BT_CTLR_ASSERT_HANDLER
|
Application Defined Assertion Handler |
CONFIG_BT_CTLR_BROADCAST_ISO
|
|
CONFIG_BT_CTLR_CENTRAL_ISO
|
LE Connected Isochronous Stream Central |
CONFIG_BT_CTLR_CENTRAL_ISO_SUPPORT
|
|
CONFIG_BT_CTLR_CHAN_SEL_2
|
Channel Selection Algorithm #2 |
CONFIG_BT_CTLR_CHAN_SEL_2_SUPPORT
|
|
CONFIG_BT_CTLR_CHECK_SAME_PEER_CONN
|
|
CONFIG_BT_CTLR_COMPANY_ID
|
Controller Company Id |
CONFIG_BT_CTLR_CONN_ISO
|
|
CONFIG_BT_CTLR_CONN_ISO_GROUPS
|
LE Connected Isochronous Groups |
CONFIG_BT_CTLR_CONN_ISO_STREAMS
|
LE Connected Isochronous Streams |
CONFIG_BT_CTLR_CONN_ISO_STREAMS_PER_GROUP
|
LE Connected Isochronous Streams per Group |
CONFIG_BT_CTLR_CONN_META
|
Enable connection meta data extension |
CONFIG_BT_CTLR_CONN_PARAM_REQ
|
Connection Parameter Request |
CONFIG_BT_CTLR_CONN_PARAM_REQ_SUPPORT
|
|
CONFIG_BT_CTLR_CONN_RANDOM_FORCE
|
Enable random forced scheduling for peripheral on missed anchor point |
CONFIG_BT_CTLR_CONN_RSSI
|
Connection RSSI |
CONFIG_BT_CTLR_CONN_RSSI_EVENT
|
Connection RSSI event |
CONFIG_BT_CTLR_CONN_RSSI_SUPPORT
|
|
CONFIG_BT_CTLR_CRYPTO
|
Enable crypto functions in Controller |
CONFIG_BT_CTLR_CSN_GPIOTE_CHAN
|
|
CONFIG_BT_CTLR_DATA_LENGTH
|
|
CONFIG_BT_CTLR_DATA_LENGTH_CLEAR
|
Data Length Support (Cleartext only) |
CONFIG_BT_CTLR_DATA_LENGTH_MAX
|
Maximum data length supported |
CONFIG_BT_CTLR_DATA_LEN_UPDATE_SUPPORT
|
|
CONFIG_BT_CTLR_DEBUG_PINS
|
Bluetooth Controller Debug Pins |
CONFIG_BT_CTLR_DEBUG_PINS_CPUAPP
|
Bluetooth Controller Debug Pins |
CONFIG_BT_CTLR_DF
|
LE Direction Finding [Experimental] |
CONFIG_BT_CTLR_DF_ADV_CTE_TX
|
Enable Connectionless CTE Transmitter feature |
CONFIG_BT_CTLR_DF_ANT_SWITCH_1US
|
Enable support for 1us antenna switch slots |
CONFIG_BT_CTLR_DF_ANT_SWITCH_1US_SUPPORT
|
|
CONFIG_BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT
|
|
CONFIG_BT_CTLR_DF_ANT_SWITCH_RX
|
Enable antenna switching during CTE reception (AoA) feature |
CONFIG_BT_CTLR_DF_ANT_SWITCH_TX
|
Enable antenna switching during CTE transmission (AoD) feature |
CONFIG_BT_CTLR_DF_CONN_CTE_RSP
|
Enable Connection CTE Response feature |
CONFIG_BT_CTLR_DF_CTE_RX
|
Enable reception of Constant Tone Extension feature |
CONFIG_BT_CTLR_DF_CTE_RX_SAMPLE_1US
|
Enable reception of CTE with 1us sampling slots |
CONFIG_BT_CTLR_DF_CTE_RX_SAMPLE_1US_SUPPORT
|
|
CONFIG_BT_CTLR_DF_CTE_RX_SUPPORT
|
|
CONFIG_BT_CTLR_DF_CTE_TX
|
Enable transmission of Constant Tone Extension |
CONFIG_BT_CTLR_DF_CTE_TX_SUPPORT
|
|
CONFIG_BT_CTLR_DF_DEBUG_ENABLE
|
Bluetooth Direction Finding debug support enable |
CONFIG_BT_CTLR_DF_INIT_ANT_SEL_GPIOS
|
Enable initialization of GPIOs responsible for antenna switching |
CONFIG_BT_CTLR_DF_MAX_ANT_SW_PATTERN_LEN
|
Maximum length of antenna switch pattern |
CONFIG_BT_CTLR_DF_SAMPLE_CTE_FOR_PDU_WITH_BAD_CRC
|
Enable sampling of CTE for PDUs with bad CRC |
CONFIG_BT_CTLR_DF_SCAN_CTE_RX
|
Enable Connectionless CTE Receiver |
CONFIG_BT_CTLR_DF_SUPPORT
|
|
CONFIG_BT_CTLR_DTM
|
|
CONFIG_BT_CTLR_DTM_HCI
|
Direct Test Mode over HCI |
CONFIG_BT_CTLR_DTM_HCI_SUPPORT
|
|
CONFIG_BT_CTLR_DUP_FILTER_LEN
|
Number of addresses in the scan duplicate filter |
CONFIG_BT_CTLR_ECDH
|
Elliptic Curve Diffie-Hellman (ECDH) |
CONFIG_BT_CTLR_ECDH_SUPPORT
|
|
CONFIG_BT_CTLR_EXT_REJ_IND
|
Extended Reject Indication |
CONFIG_BT_CTLR_EXT_REJ_IND_SUPPORT
|
|
CONFIG_BT_CTLR_EXT_SCAN_FP
|
LE Extended Scanner Filter Policies |
CONFIG_BT_CTLR_EXT_SCAN_FP_SUPPORT
|
|
CONFIG_BT_CTLR_FAST_ENC
|
Fast Encryption Setup |
CONFIG_BT_CTLR_FEM_NRF21540
|
nRF21540 GPIO interface |
CONFIG_BT_CTLR_FILTER
|
Device Whitelist Support |
CONFIG_BT_CTLR_FORCE_MD_AUTO
|
Forced MD bit automatic calculation |
CONFIG_BT_CTLR_FORCE_MD_COUNT
|
Forced MD bit count |
CONFIG_BT_CTLR_GPIO_CSN_PIN
|
FEM CSN pin number |
CONFIG_BT_CTLR_GPIO_CSN_POL_INV
|
Inverted polarity for the CSN pin |
CONFIG_BT_CTLR_GPIO_LNA
|
Low Noise Amplifier GPIO interface |
CONFIG_BT_CTLR_GPIO_LNA_OFFSET
|
Time from LNA ON to Rx ready |
CONFIG_BT_CTLR_GPIO_LNA_PIN
|
Low Noise Amplifier GPIO pin number |
CONFIG_BT_CTLR_GPIO_LNA_POL_INV
|
Inverted polarity for the LNA pin |
CONFIG_BT_CTLR_GPIO_PA
|
Power Amplifier GPIO interface |
CONFIG_BT_CTLR_GPIO_PA_OFFSET
|
Time from PA ON to Tx ready |
CONFIG_BT_CTLR_GPIO_PA_PIN
|
Power Amplifier GPIO pin number |
CONFIG_BT_CTLR_GPIO_PA_POL_INV
|
Inverted polarity for the PA pin |
CONFIG_BT_CTLR_GPIO_PDN_CSN_OFFSET
|
Time from PDN and CSN toggle to PA/LNA pin toggle |
CONFIG_BT_CTLR_GPIO_PDN_PIN
|
FEM PDN pin number |
CONFIG_BT_CTLR_GPIO_PDN_POL_INV
|
Inverted polarity for the PDN pin |
CONFIG_BT_CTLR_HCI_ADV_HANDLE_MAPPING
|
Enable advertising set handle mapping between HCI and LL |
CONFIG_BT_CTLR_HCI_CODEC_AND_DELAY_INFO
|
Codecs and controller delay information commands |
CONFIG_BT_CTLR_HCI_VS_BUILD_INFO
|
Zephyr HCI VS Build Info string |
CONFIG_BT_CTLR_ISO
|
|
CONFIG_BT_CTLR_ISO_TX_BUFFERS
|
Number of Isochronous Tx buffers |
CONFIG_BT_CTLR_ISO_TX_BUFFER_SIZE
|
Isochronous Tx buffer size |
CONFIG_BT_CTLR_JIT_SCHEDULING
|
Just-in-Time Scheduling |
CONFIG_BT_CTLR_LE_ENC
|
LE Encryption |
CONFIG_BT_CTLR_LE_ENC_SUPPORT
|
|
CONFIG_BT_CTLR_LE_PING
|
LE Ping |
CONFIG_BT_CTLR_LLCP_CONN
|
Number of connections with worst-case overlapping procedures |
CONFIG_BT_CTLR_LLID_DATA_START_EMPTY
|
Handle zero length L2CAP start frame |
CONFIG_BT_CTLR_LLL_PRIO
|
Lower Link Layer (Radio) IRQ priority |
CONFIG_BT_CTLR_LOW_LAT
|
Low latency non-negotiating event preemption |
CONFIG_BT_CTLR_LOW_LAT_ULL
|
Low latency ULL |
CONFIG_BT_CTLR_LOW_LAT_ULL_DONE
|
Low latency ULL prepare dequeue |
CONFIG_BT_CTLR_MESH_SCAN_FILTERS
|
Number of Mesh scan filters |
CONFIG_BT_CTLR_MESH_SF_PATTERNS
|
Number of Mesh scan filter patterns |
CONFIG_BT_CTLR_MIN_USED_CHAN
|
Minimum Number of Used Channels |
CONFIG_BT_CTLR_MIN_USED_CHAN_SUPPORT
|
|
CONFIG_BT_CTLR_OPTIMIZE_FOR_SPEED
|
Optimize for Speed |
CONFIG_BT_CTLR_PARAM_CHECK
|
Enable HCI Command Parameter checking |
CONFIG_BT_CTLR_PA_LNA_GPIOTE_CHAN
|
|
CONFIG_BT_CTLR_PDN_GPIOTE_CHAN
|
|
CONFIG_BT_CTLR_PERIPHERAL_ISO
|
LE Connected Isochronous Stream Peripheral |
CONFIG_BT_CTLR_PERIPHERAL_ISO_SUPPORT
|
|
CONFIG_BT_CTLR_PHY
|
|
CONFIG_BT_CTLR_PHY_2M
|
2Mbps PHY Support |
CONFIG_BT_CTLR_PHY_2M_NRF
|
2Mbps Nordic Semiconductor PHY Support (Cleartext only) |
CONFIG_BT_CTLR_PHY_2M_SUPPORT
|
|
CONFIG_BT_CTLR_PHY_CODED
|
Coded PHY Support |
CONFIG_BT_CTLR_PHY_CODED_SUPPORT
|
|
CONFIG_BT_CTLR_PHY_UPDATE_SUPPORT
|
|
CONFIG_BT_CTLR_PRIVACY
|
LE Controller-based Privacy |
CONFIG_BT_CTLR_PRIVACY_SUPPORT
|
|
CONFIG_BT_CTLR_PROFILE_ISR
|
Profile radio ISR |
CONFIG_BT_CTLR_RADIO_ENABLE_FAST
|
Use tTXEN/RXEN,FAST ramp-up |
CONFIG_BT_CTLR_RL_SIZE
|
LE Controller-based Privacy Resolving List size |
CONFIG_BT_CTLR_RPA_CACHE_SIZE
|
LE Controller-based Software Privacy Resolving List size |
CONFIG_BT_CTLR_RX_BUFFERS
|
Number of Rx buffers |
CONFIG_BT_CTLR_RX_ENQUEUE_HOLD
|
Procedure Complete after on-air instant |
CONFIG_BT_CTLR_RX_PDU_META
|
Enable RX pdu meta data |
CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE
|
High priority Rx thread stack size |
CONFIG_BT_CTLR_SCAN_AUX_SET
|
LE Extended Scanning Auxiliary Sets |
CONFIG_BT_CTLR_SCAN_ENABLE_STRICT
|
Enforce Strict Scan Enable/Disable |
CONFIG_BT_CTLR_SCAN_INDICATION
|
Scanner indications |
CONFIG_BT_CTLR_SCAN_REQ_NOTIFY
|
Scan Request Notifications |
CONFIG_BT_CTLR_SCAN_REQ_RSSI
|
Measure Scan Request RSSI |
CONFIG_BT_CTLR_SCAN_SYNC_ISO_SET
|
LE ISO Broadcast Isochronous Groups Sync Sets |
CONFIG_BT_CTLR_SCAN_UNRESERVED
|
Unreserved scan window |
CONFIG_BT_CTLR_SCHED_ADVANCED
|
Advanced scheduling |
CONFIG_BT_CTLR_SCHED_ADVANCED_SUPPORT
|
|
CONFIG_BT_CTLR_SETTINGS
|
Settings System |
CONFIG_BT_CTLR_SET_HOST_FEATURE
|
LE Set Host Feature Command [EXPERIMENTAL] |
CONFIG_BT_CTLR_SLAVE_FEAT_REQ
|
Slave-initiated Features Exchange |
CONFIG_BT_CTLR_SLAVE_FEAT_REQ_SUPPORT
|
|
CONFIG_BT_CTLR_SMI_RX
|
Stable modulation index - Receiver |
CONFIG_BT_CTLR_SMI_SUPPORT
|
|
CONFIG_BT_CTLR_SMI_TX
|
Stable modulation index - Transmitter |
CONFIG_BT_CTLR_SMI_TX_SETTING
|
Stable modulation index - Transmitter as setting |
CONFIG_BT_CTLR_SUBVERSION_NUMBER
|
Subversion Number |
CONFIG_BT_CTLR_SW_DEFERRED_PRIVACY
|
LE Controller-based Software Privacy |
CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER
|
Single TIMER tIFS Trx SW switching |
CONFIG_BT_CTLR_SYNC_ISO
|
LE Broadcast Isochronous Channel advertising sync |
CONFIG_BT_CTLR_SYNC_ISO_PDU_LEN_MAX
|
Maximum Synchronized Isochronous Channel PDU Length |
CONFIG_BT_CTLR_SYNC_ISO_SUPPORT
|
|
CONFIG_BT_CTLR_SYNC_PERIODIC
|
LE Periodic Advertising in Synchronization State |
CONFIG_BT_CTLR_SYNC_PERIODIC_SUPPORT
|
|
CONFIG_BT_CTLR_TEST
|
Run in-system unit tests |
CONFIG_BT_CTLR_THROUGHPUT
|
Measure incoming Tx throughput |
CONFIG_BT_CTLR_TIFS_HW
|
H/w Accelerated tIFS Trx switching |
CONFIG_BT_CTLR_TIFS_HW_SUPPORT
|
|
CONFIG_BT_CTLR_TX_PWR_0
|
0 dBm |
CONFIG_BT_CTLR_TX_PWR_DYNAMIC_CONTROL
|
Tx Power Dynamic Control |
CONFIG_BT_CTLR_TX_PWR_MINUS_12
|
-12 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_16
|
-16 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_20
|
-20 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_30
|
-30 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_4
|
-4 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_40
|
-40 dBm |
CONFIG_BT_CTLR_TX_PWR_MINUS_8
|
-8 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_2
|
+2 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_3
|
+3 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_4
|
+4 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_5
|
+5 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_6
|
+6 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_7
|
+7 dBm |
CONFIG_BT_CTLR_TX_PWR_PLUS_8
|
+8 dBm |
CONFIG_BT_CTLR_TX_RETRY_DISABLE
|
Disable Tx Retry |
CONFIG_BT_CTLR_ULL_HIGH_PRIO
|
Upper Link Layer High IRQ priority |
CONFIG_BT_CTLR_ULL_LLL_PRIO_SUPPORT
|
|
CONFIG_BT_CTLR_ULL_LOW_PRIO
|
Upper Link Layer Low IRQ priority |
CONFIG_BT_CTLR_USER_CPR_INTERVAL_MIN
|
Enable proprietary Connection Parameter Request minimum interval |
CONFIG_BT_CTLR_USER_EVT_RANGE
|
Range of event constants reserved for proprietary event types |
CONFIG_BT_CTLR_USER_EXT
|
Enable proprietary extensions in Controller |
CONFIG_BT_CTLR_USER_TICKER_ID_RANGE
|
Range of ticker id constants reserved for proprietary ticker nodes |
CONFIG_BT_CTLR_VERSION_SETTINGS
|
Version Settings |
CONFIG_BT_CTLR_WL_SIZE
|
LE Controller-based Privacy White List size |
CONFIG_BT_CTLR_XTAL_ADVANCED
|
Advanced event preparation |
CONFIG_BT_CTLR_XTAL_ADVANCED_SUPPORT
|
|
CONFIG_BT_CTLR_XTAL_THRESHOLD
|
Crystal shutdown threshold in uS |
CONFIG_BT_CTLR_ZLI
|
Use Zero Latency IRQs |
CONFIG_BT_CTRL_ADV_ADI_IN_SCAN_RSP
|
Include ADI in AUX_SCAN_RSP PDU |
CONFIG_BT_CTS_CLIENT_LOG_LEVEL
|
|
CONFIG_BT_CTS_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_CTS_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_CTS_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_CTS_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_CTS_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_CUSTOM
|
Custom |
CONFIG_BT_DATA_LEN_UPDATE
|
Data Length Update |
CONFIG_BT_DEBUG
|
|
CONFIG_BT_DEBUG_A2DP
|
Bluetooth A2DP debug |
CONFIG_BT_DEBUG_AICS
|
Audio Input Control Service debug |
CONFIG_BT_DEBUG_AICS_CLIENT
|
Audio Input Control Service client debug |
CONFIG_BT_DEBUG_ATT
|
Bluetooth Attribute Protocol (ATT) debug |
CONFIG_BT_DEBUG_AVDTP
|
Bluetooth AVDTP debug |
CONFIG_BT_DEBUG_CONN
|
Bluetooth connection debug |
CONFIG_BT_DEBUG_DF
|
Bluetooth Direction Finding debug |
CONFIG_BT_DEBUG_GATT
|
Bluetooth Generic Attribute Profile (GATT) debug |
CONFIG_BT_DEBUG_HCI_CORE
|
Bluetooth HCI core debug |
CONFIG_BT_DEBUG_HCI_DRIVER
|
Bluetooth HCI driver debug |
CONFIG_BT_DEBUG_HFP_HF
|
Bluetooth Hands Free Profile (HFP) debug |
CONFIG_BT_DEBUG_ISO
|
ISO channel debug |
CONFIG_BT_DEBUG_KEYS
|
Bluetooth security keys debug |
CONFIG_BT_DEBUG_L2CAP
|
Bluetooth L2CAP debug |
CONFIG_BT_DEBUG_LOG
|
Normal printf-style to console |
CONFIG_BT_DEBUG_MICS
|
Microphone Input Control Service debug |
CONFIG_BT_DEBUG_MICS_CLIENT
|
Microphone Control Profile debug |
CONFIG_BT_DEBUG_MONITOR_RTT
|
Monitor protocol over RTT |
CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER
|
Buffer number used for custom logger output. |
CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER_NAME
|
Buffer name used for custom logger output. |
CONFIG_BT_DEBUG_MONITOR_RTT_BUFFER_SIZE
|
Size of reserved up-buffer for custom logger output. |
CONFIG_BT_DEBUG_MONITOR_UART
|
Monitor protocol over UART |
CONFIG_BT_DEBUG_NONE
|
No debug log |
CONFIG_BT_DEBUG_RFCOMM
|
Bluetooth RFCOMM debug |
CONFIG_BT_DEBUG_RPA
|
Bluetooth Resolvable Private Address (RPA) debug |
CONFIG_BT_DEBUG_SDP
|
Bluetooth Service Discovery Protocol (SDP) debug |
CONFIG_BT_DEBUG_SERVICE
|
Bluetooth Services debug |
CONFIG_BT_DEBUG_SETTINGS
|
Bluetooth storage debug |
CONFIG_BT_DEBUG_SMP
|
Bluetooth Security Manager Protocol (SMP) debug |
CONFIG_BT_DEBUG_VCS
|
Volume Control Service debug |
CONFIG_BT_DEBUG_VCS_CLIENT
|
Volume Control Profile debug |
CONFIG_BT_DEBUG_VOCS
|
Volume Offset Control Service debug |
CONFIG_BT_DEBUG_VOCS_CLIENT
|
Volume Offset Control Service client debug |
CONFIG_BT_DEVICE_APPEARANCE
|
Bluetooth device appearance |
CONFIG_BT_DEVICE_NAME
|
Bluetooth device name |
CONFIG_BT_DEVICE_NAME_DYNAMIC
|
Allow to set Bluetooth device name on runtime |
CONFIG_BT_DEVICE_NAME_GATT_WRITABLE
|
Allow to write name by remote GATT clients |
CONFIG_BT_DEVICE_NAME_MAX
|
Maximum size in bytes for device name |
CONFIG_BT_DF
|
Enable Direction Finding support [EXPERIMENTAL] |
CONFIG_BT_DFU_SMP_LOG_LEVEL
|
|
CONFIG_BT_DFU_SMP_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_DFU_SMP_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_DFU_SMP_LOG_LEVEL_INF
|
Info |
CONFIG_BT_DFU_SMP_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_DFU_SMP_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_DF_CONNECTIONLESS_CTE_RX
|
Enable support for receive of CTE in connectionless mode |
CONFIG_BT_DF_CONNECTION_CTE_RX
|
Enable support for receive of CTE in connection mode |
CONFIG_BT_DIS
|
Enable GATT Device Information service |
CONFIG_BT_DIS_FW_REV
|
Enable DIS Firmware Revision characteristic |
CONFIG_BT_DIS_FW_REV_STR
|
Firmware revision |
CONFIG_BT_DIS_HW_REV
|
Enable DIS Hardware Revision characteristic |
CONFIG_BT_DIS_HW_REV_STR
|
Hardware revision |
CONFIG_BT_DIS_MANUF
|
Manufacturer name |
CONFIG_BT_DIS_MODEL
|
Model name |
CONFIG_BT_DIS_PNP
|
Enable PnP_ID characteristic |
CONFIG_BT_DIS_PNP_PID
|
Product ID |
CONFIG_BT_DIS_PNP_VER
|
Product Version |
CONFIG_BT_DIS_PNP_VID
|
Vendor ID |
CONFIG_BT_DIS_PNP_VID_SRC
|
Vendor ID source |
CONFIG_BT_DIS_SERIAL_NUMBER
|
Enable DIS Serial number characteristic |
CONFIG_BT_DIS_SERIAL_NUMBER_STR
|
Serial Number |
CONFIG_BT_DIS_SETTINGS
|
Enable Settings usage in Device Information Service |
CONFIG_BT_DIS_STR_MAX
|
Maximum size in bytes for DIS strings |
CONFIG_BT_DIS_SW_REV
|
Enable DIS Software Revision characteristic |
CONFIG_BT_DIS_SW_REV_STR
|
Software revision |
CONFIG_BT_DRIVER_QUIRK_NO_AUTO_DLE
|
Host auto-initiated Data Length Update quirk |
CONFIG_BT_DRIVER_RX_HIGH_PRIO
|
|
CONFIG_BT_EATT
|
Enhanced ATT Bearers support [EXPERIMENTAL] |
CONFIG_BT_EATT_MAX
|
Maximum number of Enhanced ATT bearers |
CONFIG_BT_EATT_SEC_LEVEL
|
Enhanced ATT bearer security level |
CONFIG_BT_ECC
|
Enable ECDH key generation support |
CONFIG_BT_ESP32
|
ESP32 HCI driver |
CONFIG_BT_EXT_ADV
|
Extended Advertising and Scanning support |
CONFIG_BT_EXT_ADV_LEGACY_SUPPORT
|
Support starting advertising through legacy commands |
CONFIG_BT_EXT_ADV_MAX_ADV_SET
|
Maximum number of simultaneous advertising sets |
CONFIG_BT_FIXED_PASSKEY
|
Use a fixed passkey for pairing |
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS
|
Automatic Update of Connection Parameters |
CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS
|
Configure peripheral preferred connection parameters |
CONFIG_BT_GATTP_LOG_LEVEL
|
|
CONFIG_BT_GATTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_GATTP_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_GATTP_LOG_LEVEL_INF
|
Info |
CONFIG_BT_GATTP_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_GATTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_GATT_AUTO_DISCOVER_CCC
|
Support to automatic discover the CCC handles of characteristics |
CONFIG_BT_GATT_AUTO_SEC_REQ
|
Automatic security re-establishment request as a peripheral |
CONFIG_BT_GATT_CACHING
|
GATT Caching support |
CONFIG_BT_GATT_CLIENT
|
GATT client support |
CONFIG_BT_GATT_DM_LOG_LEVEL
|
|
CONFIG_BT_GATT_DM_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_GATT_DM_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_GATT_DM_LOG_LEVEL_INF
|
Info |
CONFIG_BT_GATT_DM_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_GATT_DM_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_GATT_DYNAMIC_DB
|
GATT dynamic database support |
CONFIG_BT_GATT_ENFORCE_CHANGE_UNAWARE
|
GATT Enforce change-unaware state |
CONFIG_BT_GATT_NOTIFY_MULTIPLE
|
GATT Notify Multiple Characteristic Values support |
CONFIG_BT_GATT_POOL_LOG_LEVEL
|
|
CONFIG_BT_GATT_POOL_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_GATT_POOL_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_GATT_POOL_LOG_LEVEL_INF
|
Info |
CONFIG_BT_GATT_POOL_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_GATT_POOL_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_GATT_READ_MULTIPLE
|
GATT Read Multiple Characteristic Values support |
CONFIG_BT_GATT_SERVICE_CHANGED
|
GATT Service Changed support |
CONFIG_BT_H4
|
H:4 UART |
CONFIG_BT_H5
|
H:5 UART [EXPERIMENTAL] |
CONFIG_BT_HAS_HCI_VS
|
|
CONFIG_BT_HCI
|
HCI-based |
CONFIG_BT_HCI_ACL_FLOW_CONTROL
|
Controller to Host ACL flow control support |
CONFIG_BT_HCI_ECC_STACK_SIZE
|
HCI ECC thread stack size |
CONFIG_BT_HCI_HOST
|
|
CONFIG_BT_HCI_MESH_EXT
|
Mesh HCI Command support |
CONFIG_BT_HCI_RAW
|
RAW HCI access |
CONFIG_BT_HCI_RAW_CMD_EXT
|
RAW HCI Command Extension |
CONFIG_BT_HCI_RAW_H4
|
RAW HCI H:4 transport |
CONFIG_BT_HCI_RAW_H4_ENABLE
|
RAW HCI H:4 transport enable |
CONFIG_BT_HCI_RAW_RESERVE
|
Buffer headroom needed for HCI transport |
CONFIG_BT_HCI_RESERVE
|
|
CONFIG_BT_HCI_TX_PRIO
|
|
CONFIG_BT_HCI_TX_STACK_SIZE
|
HCI Tx thread stack size |
CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT
|
Override HCI Tx thread stack size |
CONFIG_BT_HCI_VS
|
Zephyr HCI Vendor-Specific Commands |
CONFIG_BT_HCI_VS_EVT_USER
|
User Vendor-Specific event handling |
CONFIG_BT_HCI_VS_EXT
|
Zephyr HCI Vendor-Specific Extensions |
CONFIG_BT_HCI_VS_EXT_DETECT
|
Use heuristics to guess HCI vendor extensions support in advance |
CONFIG_BT_HFP_HF
|
Bluetooth Handsfree profile HF Role support [EXPERIMENTAL] |
CONFIG_BT_HIDS_LOG_LEVEL
|
|
CONFIG_BT_HIDS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_HIDS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_HIDS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_HIDS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_HIDS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_HOGP_LOG_LEVEL
|
|
CONFIG_BT_HOGP_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_HOGP_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_HOGP_LOG_LEVEL_INF
|
Info |
CONFIG_BT_HOGP_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_HOGP_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_HOST_CCM
|
Enable host side AES-CCM module |
CONFIG_BT_HOST_CRYPTO
|
|
CONFIG_BT_HRS
|
Enable GATT Heart Rate service |
CONFIG_BT_HRS_DEFAULT_PERM_RW
|
Read and write allowed |
CONFIG_BT_HRS_DEFAULT_PERM_RW_AUTHEN
|
Require encryption and authentication for access |
CONFIG_BT_HRS_DEFAULT_PERM_RW_ENCRYPT
|
Require encryption for access |
CONFIG_BT_HRS_LOG_LEVEL
|
|
CONFIG_BT_HRS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_HRS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_HRS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_HRS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_HRS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_ID_MAX
|
Maximum number of local identities |
CONFIG_BT_ISO
|
|
CONFIG_BT_ISO_BROADCAST
|
Bluetooth Isochronous Channel Broadcast Support [EXPERIMENTAL] |
CONFIG_BT_ISO_MAX_BIG
|
Maximum number of Broadcast Isochronous Groups (BIGs) to support |
CONFIG_BT_ISO_MAX_CHAN
|
Maximum number of simultaneous ISO channels |
CONFIG_BT_ISO_RX_BUF_COUNT
|
Number of Isochronous RX buffers |
CONFIG_BT_ISO_RX_MTU
|
Maximum supported MTU for Isochronous RX buffers |
CONFIG_BT_ISO_TX_BUF_COUNT
|
Number of Isochronous TX buffers |
CONFIG_BT_ISO_TX_FRAG_COUNT
|
Number of ISO TX fragment buffers |
CONFIG_BT_ISO_TX_MTU
|
Maximum supported MTU for Isochronous TX buffers |
CONFIG_BT_ISO_UNICAST
|
Bluetooth Isochronous Channel Unicast Support [EXPERIMENTAL] |
CONFIG_BT_KEYS_OVERWRITE_OLDEST
|
Overwrite the oldest key if key storage is full |
CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING
|
Store aging counter every time a successful paring occurs |
CONFIG_BT_L2CAP_DYNAMIC_CHANNEL
|
L2CAP Dynamic Channel support |
CONFIG_BT_L2CAP_ECRED
|
L2CAP Enhanced Credit Based Flow Control support [EXPERIMENTAL] |
CONFIG_BT_L2CAP_TX_BUF_COUNT
|
Number of L2CAP TX buffers |
CONFIG_BT_L2CAP_TX_FRAG_COUNT
|
Number of L2CAP TX fragment buffers |
CONFIG_BT_L2CAP_TX_MTU
|
Maximum supported L2CAP MTU for L2CAP TX buffers |
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL
|
|
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_LATENCY_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_LATENCY_LOG_LEVEL
|
|
CONFIG_BT_LATENCY_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_LATENCY_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_LATENCY_LOG_LEVEL_INF
|
Info |
CONFIG_BT_LATENCY_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_LATENCY_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_LBS_LOG_LEVEL
|
|
CONFIG_BT_LBS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_LBS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_LBS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_LBS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_LBS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_LIM_ADV_TIMEOUT
|
Timeout for limited advertising in 1s units |
CONFIG_BT_LLL_VENDOR_NORDIC
|
Use Nordic LLL |
CONFIG_BT_LLL_VENDOR_OPENISA
|
Use OpenISA LLL |
CONFIG_BT_LL_SW_SPLIT
|
Software-based BLE Link Layer [EXPERIMENTAL] |
CONFIG_BT_LOG_LEVEL
|
|
CONFIG_BT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_LOG_SNIFFER_INFO
|
Bluetooth log information for sniffer |
CONFIG_BT_MAX_CONN
|
Maximum number of simultaneous connections |
CONFIG_BT_MAX_PAIRED
|
Maximum number of paired devices |
CONFIG_BT_MAX_SCO_CONN
|
Maximum number of simultaneous SCO connections |
CONFIG_BT_MAYFLY_YIELD_AFTER_CALL
|
Yield from mayfly thread after first call |
CONFIG_BT_MESH
|
Bluetooth mesh support [EXPERIMENTAL] |
CONFIG_BT_MESH_ACCESS_LAYER_MSG
|
Enable direct Bluetooth message access layer messages |
CONFIG_BT_MESH_ADV_BUF_COUNT
|
Number of advertising buffers |
CONFIG_BT_MESH_ADV_EXT
|
Extended advertising |
CONFIG_BT_MESH_ADV_LEGACY
|
Legacy advertising |
CONFIG_BT_MESH_ADV_STACK_SIZE
|
Mesh advertiser thread stack size |
CONFIG_BT_MESH_APP_KEY_COUNT
|
Maximum number of application keys per network |
CONFIG_BT_MESH_BEACON_ENABLED
|
Secure network beacon enabled |
CONFIG_BT_MESH_CDB
|
Mesh Configuration Database [EXPERIMENTAL] |
CONFIG_BT_MESH_CDB_APP_KEY_COUNT
|
Maximum number of application keys in the database |
CONFIG_BT_MESH_CDB_NODE_COUNT
|
Maximum number of nodes in the database |
CONFIG_BT_MESH_CDB_SUBNET_COUNT
|
Maximum number of subnets in the database |
CONFIG_BT_MESH_CFG_CLI
|
Support for Configuration Client Model |
CONFIG_BT_MESH_CRPL
|
Maximum capacity of the replay protection list |
CONFIG_BT_MESH_DEBUG
|
Enable debug logs |
CONFIG_BT_MESH_DEBUG_ACCESS
|
Access layer debug |
CONFIG_BT_MESH_DEBUG_ADV
|
Advertising debug |
CONFIG_BT_MESH_DEBUG_BEACON
|
Beacon debug |
CONFIG_BT_MESH_DEBUG_CDB
|
Configuration database debug |
CONFIG_BT_MESH_DEBUG_CFG
|
Configuration debug |
CONFIG_BT_MESH_DEBUG_CRYPTO
|
Crypto debug |
CONFIG_BT_MESH_DEBUG_FRIEND
|
Friend debug |
CONFIG_BT_MESH_DEBUG_KEYS
|
Key management debug |
CONFIG_BT_MESH_DEBUG_LOW_POWER
|
Low Power debug |
CONFIG_BT_MESH_DEBUG_MODEL
|
Foundation model debug |
CONFIG_BT_MESH_DEBUG_NET
|
Network layer debug |
CONFIG_BT_MESH_DEBUG_PROV
|
Provisioning debug |
CONFIG_BT_MESH_DEBUG_PROVISIONER
|
Provisioner debug |
CONFIG_BT_MESH_DEBUG_PROXY
|
Proxy debug |
CONFIG_BT_MESH_DEBUG_RPL
|
Replay protection list debug |
CONFIG_BT_MESH_DEBUG_SETTINGS
|
Persistent settings debug |
CONFIG_BT_MESH_DEBUG_TRANS
|
Transport layer debug |
CONFIG_BT_MESH_DEBUG_USE_ID_ADDR
|
Use identity address for all advertising |
CONFIG_BT_MESH_DEFAULT_TTL
|
Default TTL value |
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL
|
|
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_INF
|
Info |
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_MESH_DK_PROV_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_MESH_FRIEND
|
Support for acting as a Friend Node |
CONFIG_BT_MESH_FRIEND_ENABLED
|
Friend feature enabled |
CONFIG_BT_MESH_FRIEND_LPN_COUNT
|
Number of supported LPN nodes |
CONFIG_BT_MESH_FRIEND_QUEUE_SIZE
|
Minimum number of buffers supported per Friend Queue |
CONFIG_BT_MESH_FRIEND_RECV_WIN
|
Friend Receive Window |
CONFIG_BT_MESH_FRIEND_SEG_RX
|
Number of incomplete segment lists per LPN |
CONFIG_BT_MESH_FRIEND_SUB_LIST_SIZE
|
Friend Subscription List Size |
CONFIG_BT_MESH_GATT
|
|
CONFIG_BT_MESH_GATT_PROXY
|
GATT Proxy Service support |
CONFIG_BT_MESH_GATT_PROXY_ENABLED
|
GATT Proxy enabled |
CONFIG_BT_MESH_GATT_SERVER
|
|
CONFIG_BT_MESH_HEALTH_CLI
|
Support for Health Client Model |
CONFIG_BT_MESH_IVU_DIVIDER
|
Divider for IV Update state refresh timer |
CONFIG_BT_MESH_IV_UPDATE_SEQ_LIMIT
|
Sequence number limit to start iv update |
CONFIG_BT_MESH_IV_UPDATE_TEST
|
Test the IV Update Procedure |
CONFIG_BT_MESH_LABEL_COUNT
|
Maximum number of Label UUIDs used for Virtual Addresses |
CONFIG_BT_MESH_LOOPBACK_BUFS
|
Number of loopback buffers |
CONFIG_BT_MESH_LOW_POWER
|
Support for Low Power features |
CONFIG_BT_MESH_LPN_AUTO
|
Automatically start looking for Friend nodes once provisioned |
CONFIG_BT_MESH_LPN_AUTO_TIMEOUT
|
Time from last received message before going to LPN mode |
CONFIG_BT_MESH_LPN_ESTABLISHMENT
|
Perform Friendship establishment using low power |
CONFIG_BT_MESH_LPN_GROUPS
|
Number of groups the LPN can subscribe to |
CONFIG_BT_MESH_LPN_INIT_POLL_TIMEOUT
|
The starting value of the PollTimeout timer |
CONFIG_BT_MESH_LPN_MIN_QUEUE_SIZE
|
Minimum size of acceptable friend queue (MinQueueSizeLog) |
CONFIG_BT_MESH_LPN_POLL_TIMEOUT
|
The value of the PollTimeout timer |
CONFIG_BT_MESH_LPN_RECV_DELAY
|
Receive delay requested by the local node |
CONFIG_BT_MESH_LPN_RECV_WIN_FACTOR
|
ReceiveWindowFactor, used in the Friend Offer Delay calculation |
CONFIG_BT_MESH_LPN_RETRY_TIMEOUT
|
Retry timeout for Friend requests |
CONFIG_BT_MESH_LPN_RSSI_FACTOR
|
RSSIFactor, used in the Friend Offer Delay calculation |
CONFIG_BT_MESH_LPN_SCAN_LATENCY
|
Latency for enabling scanning |
CONFIG_BT_MESH_LPN_SUB_ALL_NODES_ADDR
|
Automatically subscribe all nodes address |
CONFIG_BT_MESH_MODEL_EXTENSIONS
|
Support for Model extensions |
CONFIG_BT_MESH_MODEL_GROUP_COUNT
|
Maximum number of group address subscriptions per model |
CONFIG_BT_MESH_MODEL_KEY_COUNT
|
Maximum number of application keys per model |
CONFIG_BT_MESH_MODEL_VND_MSG_CID_FORCE
|
Force vendor model to use the corresponding CID field message |
CONFIG_BT_MESH_MSG_CACHE_SIZE
|
Network message cache size |
CONFIG_BT_MESH_NETWORK_TRANSMIT_COUNT
|
Network Transmit Count |
CONFIG_BT_MESH_NETWORK_TRANSMIT_INTERVAL
|
Network Transmit Interval |
CONFIG_BT_MESH_NODE_ID_TIMEOUT
|
Node Identity advertising timeout |
CONFIG_BT_MESH_PB_ADV
|
Provisioning support using the advertising bearer (PB-ADV) |
CONFIG_BT_MESH_PB_ADV_RETRANS_TIMEOUT
|
Timeout value of retransmit provisioning PDUs |
CONFIG_BT_MESH_PB_GATT
|
Provisioning support using GATT (PB-GATT) |
CONFIG_BT_MESH_PROV
|
|
CONFIG_BT_MESH_PROVISIONER
|
Provisioner support |
CONFIG_BT_MESH_PROV_DEVICE
|
Provisioning device role support |
CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY
|
OOB Public key support |
CONFIG_BT_MESH_PROXY
|
|
CONFIG_BT_MESH_PROXY_FILTER_SIZE
|
Maximum number of filter entries per Proxy Client |
CONFIG_BT_MESH_PROXY_USE_DEVICE_NAME
|
Include Bluetooth device name in scan response |
CONFIG_BT_MESH_RELAY
|
Relay support |
CONFIG_BT_MESH_RELAY_ENABLED
|
Relay enabled |
CONFIG_BT_MESH_RELAY_RETRANSMIT_COUNT
|
Relay Retransmit Count |
CONFIG_BT_MESH_RELAY_RETRANSMIT_INTERVAL
|
Relay Retransmit Interval |
CONFIG_BT_MESH_RPL_STORE_TIMEOUT
|
Minimum interval after which unsaved RPL entries are updated in storage |
CONFIG_BT_MESH_RX_SEG_MAX
|
Maximum number of segments in incoming messages |
CONFIG_BT_MESH_RX_SEG_MSG_COUNT
|
Maximum number of simultaneous incoming segmented messages |
CONFIG_BT_MESH_SEG_BUFS
|
Number of segment buffers available |
CONFIG_BT_MESH_SELF_TEST
|
Perform self-tests |
CONFIG_BT_MESH_SEQ_STORE_RATE
|
How often the sequence number gets updated in storage |
CONFIG_BT_MESH_SHELL
|
Enable Bluetooth mesh shell |
CONFIG_BT_MESH_STORE_TIMEOUT
|
Delay (in seconds) before storing anything persistently |
CONFIG_BT_MESH_SUBNET_COUNT
|
Maximum number of mesh subnets per network |
CONFIG_BT_MESH_TX_SEG_MAX
|
Maximum number of segments in outgoing messages |
CONFIG_BT_MESH_TX_SEG_MSG_COUNT
|
Maximum number of simultaneous outgoing segmented messages |
CONFIG_BT_MESH_TX_SEG_RETRANS_COUNT
|
Transport message segment retransmit attempts |
CONFIG_BT_MESH_TX_SEG_RETRANS_TIMEOUT_GROUP
|
Transport message segment retransmit interval for group messages |
CONFIG_BT_MESH_TX_SEG_RETRANS_TIMEOUT_UNICAST
|
Transport message segment retransmit interval for unicast messages |
CONFIG_BT_MESH_UNPROV_BEACON_INT
|
The interval (in seconds) to send the unprovisioned beacon |
CONFIG_BT_MICS
|
Microphone Input Control Service Support |
CONFIG_BT_MICS_AICS
|
|
CONFIG_BT_MICS_AICS_INSTANCE_COUNT
|
Audio Input Control Service instance count for Microphone Input Control Service |
CONFIG_BT_MICS_CLIENT
|
Microphone Control Profile Support |
CONFIG_BT_MICS_CLIENT_AICS
|
|
CONFIG_BT_MICS_CLIENT_MAX_AICS_INST
|
Maximum number of Audio Input Control Service instances to setup |
CONFIG_BT_MONITOR
|
|
CONFIG_BT_MONITOR_ON_DEV_NAME
|
Device Name of Bluetooth monitor logging UART |
CONFIG_BT_NO_DRIVER
|
No default HCI driver |
CONFIG_BT_NUS_CLIENT_LOG_LEVEL
|
|
CONFIG_BT_NUS_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_NUS_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_NUS_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_NUS_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_NUS_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_NUS_LOG_LEVEL
|
|
CONFIG_BT_NUS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_NUS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_NUS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_NUS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_NUS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_OBSERVER
|
Observer Role support |
CONFIG_BT_OOB_DATA_FIXED
|
Use a fixed random number for LESC OOB pairing |
CONFIG_BT_OTS
|
Object Transfer Service (OTS) [EXPERIMENTAL] |
CONFIG_BT_OTS_DIR_LIST_OBJ
|
Enables the Directory Listing Object |
CONFIG_BT_OTS_DIR_LIST_OBJ_NAME
|
The object name of the Directory Listing Object |
CONFIG_BT_OTS_L2CAP_CHAN_RX_MTU
|
Size of RX MTU for Object Transfer Channel |
CONFIG_BT_OTS_LOG_LEVEL
|
|
CONFIG_BT_OTS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_OTS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_OTS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_OTS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_OTS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_OTS_MAX_INST_CNT
|
Maximum number of available OTS instances |
CONFIG_BT_OTS_MAX_OBJ_CNT
|
Maximum number of objects that each service instance can store |
CONFIG_BT_OTS_OACP_READ_SUPPORT
|
Support OACP Read Operation |
CONFIG_BT_OTS_OBJ_MAX_NAME_LEN
|
Maximum object name length |
CONFIG_BT_OTS_OBJ_NAME_WRITE_SUPPORT
|
Support object name write |
CONFIG_BT_OTS_OLCP_GO_TO_SUPPORT
|
Support OLCP Go To Operation |
CONFIG_BT_OTS_SECONDARY_SVC
|
Register OTS as Secondary Service |
CONFIG_BT_PAGE_TIMEOUT
|
Bluetooth Page Timeout |
CONFIG_BT_PERIPHERAL
|
Peripheral Role support |
CONFIG_BT_PERIPHERAL_PREF_MAX_INT
|
Peripheral preferred maximum connection interval in 1.25ms units |
CONFIG_BT_PERIPHERAL_PREF_MIN_INT
|
Peripheral preferred minimum connection interval in 1.25ms units |
CONFIG_BT_PERIPHERAL_PREF_SLAVE_LATENCY
|
Peripheral preferred slave latency in Connection Intervals |
CONFIG_BT_PERIPHERAL_PREF_TIMEOUT
|
Peripheral preferred supervision timeout in 10ms units |
CONFIG_BT_PER_ADV
|
Periodic Advertising and Scanning support [EXPERIMENTAL] |
CONFIG_BT_PER_ADV_SYNC
|
Periodic advertising sync support [EXPERIMENTAL] |
CONFIG_BT_PER_ADV_SYNC_MAX
|
Maximum number of simultaneous periodic advertising syncs |
CONFIG_BT_PHY_UPDATE
|
PHY Update |
CONFIG_BT_PRIVACY
|
Privacy Feature |
CONFIG_BT_RECV_IS_RX_THREAD
|
bt_recv is called from RX thread |
CONFIG_BT_REMOTE_INFO
|
Enable application access to remote information |
CONFIG_BT_REMOTE_VERSION
|
Enable fetching of remote version |
CONFIG_BT_RFCOMM
|
Bluetooth RFCOMM protocol support [EXPERIMENTAL] |
CONFIG_BT_RFCOMM_L2CAP_MTU
|
L2CAP MTU for RFCOMM frames |
CONFIG_BT_RPA
|
|
CONFIG_BT_RPA_TIMEOUT
|
Resolvable Private Address timeout |
CONFIG_BT_RPC_LOG_LEVEL
|
|
CONFIG_BT_RPC_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_RPC_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_RPC_LOG_LEVEL_INF
|
Info |
CONFIG_BT_RPC_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_RPC_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_RPMSG
|
HCI using RPMsg |
CONFIG_BT_RPMSG_NRF53
|
nRF53 configuration of RPMsg |
CONFIG_BT_RSCS_LOG_LEVEL
|
|
CONFIG_BT_RSCS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_RSCS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_RSCS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_RSCS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_RSCS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_RX_PRIO
|
|
CONFIG_BT_RX_STACK_SIZE
|
Size of the receiving thread stack |
CONFIG_BT_RX_USER_PDU_LEN
|
Maximum supported proprietary PDU buffer length |
CONFIG_BT_SCAN_LOG_LEVEL
|
|
CONFIG_BT_SCAN_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_SCAN_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_SCAN_LOG_LEVEL_INF
|
Info |
CONFIG_BT_SCAN_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_SCAN_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_SCAN_WITH_IDENTITY
|
Perform active scanning using local identity address |
CONFIG_BT_SETTINGS
|
Store Bluetooth state and configuration persistently |
CONFIG_BT_SETTINGS_CCC_LAZY_LOADING
|
Load CCC values from settings when peer connects |
CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE
|
Store CCC value immediately after it has been written |
CONFIG_BT_SETTINGS_USE_PRINTK
|
Use snprintk to encode Bluetooth settings key strings |
CONFIG_BT_SHELL
|
Enable Bluetooth shell |
CONFIG_BT_SIGNING
|
Data signing support |
CONFIG_BT_SMP
|
Security Manager Protocol support |
CONFIG_BT_SMP_ALLOW_UNAUTH_OVERWRITE
|
Allow unauthenticated pairing for paired device |
CONFIG_BT_SMP_APP_PAIRING_ACCEPT
|
Accept or reject pairing initiative |
CONFIG_BT_SMP_DISABLE_LEGACY_JW_PASSKEY
|
Forbid usage of insecure legacy pairing methods |
CONFIG_BT_SMP_ENFORCE_MITM
|
Enforce MITM protection |
CONFIG_BT_SMP_FORCE_BREDR
|
Force Bluetooth SMP over BR/EDR |
CONFIG_BT_SMP_MIN_ENC_KEY_SIZE
|
Minimum encryption key size accepted in octets |
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
|
Force Out Of Band Legacy pairing |
CONFIG_BT_SMP_SC_ONLY
|
Secure Connections Only Mode |
CONFIG_BT_SMP_SC_PAIR_ONLY
|
Disable legacy pairing |
CONFIG_BT_SMP_SELFTEST
|
Bluetooth SMP self tests executed on init |
CONFIG_BT_SMP_USB_HCI_CTLR_WORKAROUND
|
Workaround for USB HCI controller out-of-order events |
CONFIG_BT_SPI
|
SPI HCI |
CONFIG_BT_SPI_BLUENRG
|
Enable compatibility with BlueNRG-based devices |
CONFIG_BT_SPI_INIT_PRIORITY
|
BT SPI init priority |
CONFIG_BT_STM32_IPM
|
IPM HCI |
CONFIG_BT_STM32_IPM_RX_STACK_SIZE
|
STM32 IPM stack size for RX thread |
CONFIG_BT_STORE_DEBUG_KEYS
|
Store Debug Mode bonds |
CONFIG_BT_TESTING
|
Bluetooth Testing |
CONFIG_BT_THROUGHPUT_LOG_LEVEL
|
|
CONFIG_BT_THROUGHPUT_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_THROUGHPUT_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_THROUGHPUT_LOG_LEVEL_INF
|
Info |
CONFIG_BT_THROUGHPUT_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_THROUGHPUT_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_TICKER_EXT
|
Ticker extensions |
CONFIG_BT_TICKER_LAZY_GET
|
Ticker Next Slot Get with Lazy |
CONFIG_BT_TICKER_LOW_LAT
|
Ticker low latency mode |
CONFIG_BT_TICKER_NEXT_SLOT_GET_MATCH
|
Ticker Next Slot Get with match callback |
CONFIG_BT_TICKER_SLOT_AGNOSTIC
|
Slot agnostic ticker mode |
CONFIG_BT_TINYCRYPT_ECC
|
Emulate ECDH in the Host using TinyCrypt library |
CONFIG_BT_TPS
|
Enable GATT TX Power service |
CONFIG_BT_TPS_LOG_LEVEL
|
|
CONFIG_BT_TPS_LOG_LEVEL_DBG
|
Debug |
CONFIG_BT_TPS_LOG_LEVEL_ERR
|
Error |
CONFIG_BT_TPS_LOG_LEVEL_INF
|
Info |
CONFIG_BT_TPS_LOG_LEVEL_OFF
|
Off |
CONFIG_BT_TPS_LOG_LEVEL_WRN
|
Warning |
CONFIG_BT_UART
|
|
CONFIG_BT_UART_ON_DEV_NAME
|
Device Name of UART Device for Bluetooth |
CONFIG_BT_USERCHAN
|
HCI User Channel based driver |
CONFIG_BT_USER_DATA_LEN_UPDATE
|
User control of Data Length Update Procedure |
CONFIG_BT_USER_PHY_UPDATE
|
User control of PHY Update Procedure |
CONFIG_BT_USE_DEBUG_KEYS
|
Enable Security Manager Debug Mode |
CONFIG_BT_VCS
|
Volume Control Service Support |
CONFIG_BT_VCS_AICS
|
|
CONFIG_BT_VCS_AICS_INSTANCE_COUNT
|
Audio Input Control Service instance count for VCS |
CONFIG_BT_VCS_CLIENT
|
Volume Control Profile Support |
CONFIG_BT_VCS_CLIENT_AICS
|
|
CONFIG_BT_VCS_CLIENT_MAX_AICS_INST
|
Maximum number of AICS instances to setup |
CONFIG_BT_VCS_CLIENT_MAX_VOCS_INST
|
Maximum number of VOCS instances to setup |
CONFIG_BT_VCS_CLIENT_VOCS
|
|
CONFIG_BT_VCS_VOCS
|
|
CONFIG_BT_VCS_VOCS_INSTANCE_COUNT
|
Volume Offset Control Service instance count |
CONFIG_BT_VOCS
|
|
CONFIG_BT_VOCS_CLIENT
|
|
CONFIG_BT_VOCS_CLIENT_MAX_INSTANCE_COUNT
|
Volume Offset Control Service client max instance count |
CONFIG_BT_VOCS_MAX_INSTANCE_COUNT
|
Volume Offset Control Service max instance count |
CONFIG_BT_VOCS_MAX_OUTPUT_DESCRIPTION_SIZE
|
Volume Offset Control Service max output description size |
CONFIG_BT_WAIT_NOP
|
Wait for “NOP” Command Complete event during init |
CONFIG_BT_WHITELIST
|
Enable whitelist support |
CONFIG_BUILD_NO_GAP_FILL
|
Don’t fill gaps in generated hex/bin/s19 files. |
CONFIG_BUILD_OUTPUT_BIN
|
Build a binary in BIN format |
CONFIG_BUILD_OUTPUT_EFI
|
Build as an EFI application |
CONFIG_BUILD_OUTPUT_EXE
|
Build a binary in ELF format with .exe extension |
CONFIG_BUILD_OUTPUT_HEX
|
Build a binary in HEX format |
CONFIG_BUILD_OUTPUT_S19
|
Build a binary in S19 format |
CONFIG_BUILD_OUTPUT_STRIPPED
|
Build a stripped binary |
CONFIG_BUILD_OUTPUT_UF2
|
Build a binary in UF2 format |
CONFIG_BUILD_OUTPUT_UF2_FAMILY_ID
|
UF2 device family ID |
CONFIG_BUILD_WITH_TFM
|
Build with TF-M as the Secure Execution Environment |
CONFIG_BUILTIN_STACK_GUARD
|
Thread Stack Guards based on built-in ARM stack limit checking |
CONFIG_BYPASS_LDO_LPSR
|
Bypass LDO lpsr |
CONFIG_CACHE
|
External cache controllers drivers |
CONFIG_CACHE_HAS_DRIVER
|
|
CONFIG_CACHE_LOG_LEVEL
|
|
CONFIG_CACHE_LOG_LEVEL_DBG
|
Debug |
CONFIG_CACHE_LOG_LEVEL_ERR
|
Error |
CONFIG_CACHE_LOG_LEVEL_INF
|
Info |
CONFIG_CACHE_LOG_LEVEL_OFF
|
Off |
CONFIG_CACHE_LOG_LEVEL_WRN
|
Warning |
CONFIG_CACHE_MANAGEMENT
|
Enable cache management features |
CONFIG_CAF_BLE_ADV_LOG_LEVEL
|
|
CONFIG_CAF_BLE_ADV_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_BLE_ADV_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_BLE_ADV_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_BLE_ADV_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_BLE_ADV_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_BLE_SMP_LOG_LEVEL
|
|
CONFIG_CAF_BLE_SMP_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_BLE_SMP_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_BLE_SMP_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_BLE_SMP_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_BLE_SMP_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_BLE_STATE_LOG_LEVEL
|
|
CONFIG_CAF_BLE_STATE_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_BLE_STATE_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_BLE_STATE_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_BLE_STATE_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_BLE_STATE_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_BUTTONS_LOG_LEVEL
|
|
CONFIG_CAF_BUTTONS_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_BUTTONS_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_BUTTONS_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_BUTTONS_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_BUTTONS_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL
|
|
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_CLICK_DETECTOR_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_LEDS_LOG_LEVEL
|
|
CONFIG_CAF_LEDS_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_LEDS_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_LEDS_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_LEDS_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_LEDS_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL
|
|
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_NET_STATE_LTE_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL
|
|
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_NET_STATE_OT_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL
|
|
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_POWER_MANAGER_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL
|
|
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_ERR
|
Error |
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_INF
|
Info |
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_OFF
|
Off |
CONFIG_CAF_SENSOR_SAMPLER_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAN
|
CAN Drivers |
CONFIG_CANFD_MAX_DLC
|
Max data length code in CAN frames |
CONFIG_CANOPEN
|
CANopen protocol support |
CONFIG_CANOPENNODE
|
CANopenNode support |
CONFIG_CANOPENNODE_LEDS
|
CANopen LED indicators |
CONFIG_CANOPENNODE_LEDS_BICOLOR
|
CANopen bicolor LED indicator |
CONFIG_CANOPENNODE_PROGRAM_DOWNLOAD
|
CANopen program download |
CONFIG_CANOPENNODE_SDO_BUFFER_SIZE
|
CANopen SDO buffer size |
CONFIG_CANOPENNODE_STORAGE
|
CANopen object dictionary storage |
CONFIG_CANOPENNODE_STORAGE_HANDLER_ERASES_EEPROM
|
Erase CANopen object dictionary EEPROM entries in storage handler |
CONFIG_CANOPENNODE_SYNC_THREAD
|
CANopen SYNC thread |
CONFIG_CANOPENNODE_SYNC_THREAD_PRIORITY
|
Priority for CANopen SYNC thread |
CONFIG_CANOPENNODE_SYNC_THREAD_STACK_SIZE
|
Stack size for the CANopen SYNC thread |
CONFIG_CANOPENNODE_TRACE_BUFFER_SIZE
|
CANopen trace buffer size |
CONFIG_CANOPENNODE_TX_WORKQUEUE_PRIORITY
|
Priority for CANopen transmit workqueue |
CONFIG_CANOPENNODE_TX_WORKQUEUE_STACK_SIZE
|
Stack size for the CANopen transmit workqueue |
CONFIG_CANOPEN_LOG_LEVEL
|
|
CONFIG_CANOPEN_LOG_LEVEL_DBG
|
Debug |
CONFIG_CANOPEN_LOG_LEVEL_ERR
|
Error |
CONFIG_CANOPEN_LOG_LEVEL_INF
|
Info |
CONFIG_CANOPEN_LOG_LEVEL_OFF
|
Off |
CONFIG_CANOPEN_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAN_AUTO_BUS_OFF_RECOVERY
|
Enable automatic recovery from bus-off |
CONFIG_CAN_DELAY_COMP
|
Enable transceiver delay compensation |
CONFIG_CAN_FD_MODE
|
CAN-FD |
CONFIG_CAN_HAS_CANFD
|
|
CONFIG_CAN_HAS_RX_TIMESTAMP
|
|
CONFIG_CAN_INIT_PRIORITY
|
CAN driver init priority |
CONFIG_CAN_LOG_LEVEL
|
|
CONFIG_CAN_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAN_LOG_LEVEL_ERR
|
Error |
CONFIG_CAN_LOG_LEVEL_INF
|
Info |
CONFIG_CAN_LOG_LEVEL_OFF
|
Off |
CONFIG_CAN_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAN_LOOPBACK
|
Loopback CAN driver |
CONFIG_CAN_LOOPBACK_DEV_NAME
|
CAN loopback device name |
CONFIG_CAN_LOOPBACK_TX_MSGQ_SIZE
|
TX message queue size |
CONFIG_CAN_LOOPBACK_TX_THREAD_PRIORITY
|
TX thread priority |
CONFIG_CAN_LOOPBACK_TX_THREAD_STACK_SIZE
|
TX thread stack size |
CONFIG_CAN_MAX_EXT_ID_FILTER
|
Maximum number of ext ID filters |
CONFIG_CAN_MAX_FILTER
|
Maximum number of concurrent active filters |
CONFIG_CAN_MAX_STD_ID_FILTER
|
Maximum number of std ID filters |
CONFIG_CAN_MCAN
|
|
CONFIG_CAN_MCP2515
|
MCP2515 CAN Driver |
CONFIG_CAN_MCP2515_INIT_PRIORITY
|
Init priority |
CONFIG_CAN_MCP2515_INT_THREAD_PRIO
|
Priority for interrupt handler |
CONFIG_CAN_MCP2515_INT_THREAD_STACK_SIZE
|
Stack size for interrupt handler |
CONFIG_CAN_MCUX_FLEXCAN
|
MCUX FlexCAN driver |
CONFIG_CAN_NET
|
Enable 6loCAN network interface [EXPERIMENTAL] |
CONFIG_CAN_NET_INIT_PRIORITY
|
CAN NET driver init priority |
CONFIG_CAN_NET_LOG_LEVEL
|
|
CONFIG_CAN_NET_LOG_LEVEL_DBG
|
Debug |
CONFIG_CAN_NET_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_CAN_NET_LOG_LEVEL_ERR
|
Error |
CONFIG_CAN_NET_LOG_LEVEL_INF
|
Info |
CONFIG_CAN_NET_LOG_LEVEL_OFF
|
Off |
CONFIG_CAN_NET_LOG_LEVEL_WRN
|
Warning |
CONFIG_CAN_NET_NAME
|
Network device name |
CONFIG_CAN_RCAR
|
Renesas R-Car CAN Driver |
CONFIG_CAN_RCAR_MAX_FILTER
|
Maximum number of concurrent active filters |
CONFIG_CAN_RX_TIMESTAMP
|
Enable receiving timestamps |
CONFIG_CAN_SHELL
|
Enable CAN Shell |
CONFIG_CAN_STM32
|
STM32 CAN Driver |
CONFIG_CAN_STM32FD
|
STM32 FDCAN driver |
CONFIG_CAN_STM32_CLOCK_DIVISOR
|
CAN clock divisor |
CONFIG_CAN_WORKQ_FRAMES_BUF_CNT
|
Work queue buffer frame count |
CONFIG_CAVS_ICTL
|
CAVS Interrupt Logic |
CONFIG_CAVS_ICTL_0_OFFSET
|
Parent interrupt number to which CAVS_0 maps |
CONFIG_CAVS_ICTL_1_OFFSET
|
Parent interrupt number to which CAVS_1 maps |
CONFIG_CAVS_ICTL_2_OFFSET
|
Parent interrupt number to which CAVS_2 maps |
CONFIG_CAVS_ICTL_3_OFFSET
|
Parent interrupt number to which CAVS_3 maps |
CONFIG_CAVS_ICTL_INIT_PRIORITY
|
CAVS ICTL Init priority |
CONFIG_CAVS_ISR_TBL_OFFSET
|
Offset in the SW ISR Table |
CONFIG_CAVS_TIMER
|
CAVS DSP Wall Clock Timer on Intel SoC |
CONFIG_CBOR_ENCODER_NO_CHECK_USER
|
No encoder checks for user args for validity |
CONFIG_CBOR_FLOATING_POINT
|
Floating point support |
CONFIG_CBOR_HALF_FLOAT_TYPE
|
Half float type support |
CONFIG_CBOR_PARSER_MAX_RECURSIONS
|
Parser max recursions |
CONFIG_CBOR_PARSER_NO_STRICT_CHECKS
|
No strict parser checks |
CONFIG_CBOR_PRETTY_PRINTING
|
Implement pretty printing functionality |
CONFIG_CBOR_WITHOUT_OPEN_MEMSTREAM
|
Without open memstream |
CONFIG_CBPRINTF_COMPLETE
|
All selected features |
CONFIG_CBPRINTF_FP_ALWAYS_A
|
Select %a format for all floating point specifications |
CONFIG_CBPRINTF_FP_A_SUPPORT
|
Enable floating point %a conversions |
CONFIG_CBPRINTF_FP_SUPPORT
|
Enable floating point formatting in cbprintf |
CONFIG_CBPRINTF_FULL_INTEGRAL
|
Convert the full range of integer values |
CONFIG_CBPRINTF_LIBC_SUBSTS
|
Generate C-library compatible functions using cbprintf |
CONFIG_CBPRINTF_NANO
|
Space-optimized but feature-limited |
CONFIG_CBPRINTF_N_SPECIFIER
|
Support %n specifications |
CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE
|
Support packaging of long doubles |
CONFIG_CBPRINTF_REDUCED_INTEGRAL
|
Convert only integer values that fit in 32 bits |
CONFIG_CBPRINTF_STATIC_PACKAGE_CHECK_ALIGNMENT
|
Validate alignment of a static package buffer |
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_ENABLE
|
ROM bootloader backdoor |
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_LEVEL
|
ROM bootloader backdoor level |
CONFIG_CC13X2_CC26X2_BOOTLOADER_BACKDOOR_PIN
|
ROM bootloader backdoor pin |
CONFIG_CC13X2_CC26X2_BOOTLOADER_ENABLE
|
ROM bootloader |
CONFIG_CC13X2_CC26X2_RTC_TIMER
|
TI SimpleLink CC13x2/CC26x2 RTC timer |
CONFIG_CC3220SF_DEBUG
|
Prepend debug header, disabling flash verification |
CONFIG_CC3235SF_DEBUG
|
Prepend debug header, disabling flash verification |
CONFIG_CCS811
|
CCS811 Digital Gas Sensor |
CONFIG_CCS811_DRIVE_MODE_0
|
Measurements disabled |
CONFIG_CCS811_DRIVE_MODE_1
|
Measurement every second |
CONFIG_CCS811_DRIVE_MODE_2
|
Measurement every ten seconds |
CONFIG_CCS811_DRIVE_MODE_3
|
Measurement every sixty seconds |
CONFIG_CCS811_DRIVE_MODE_4
|
Measurement every 250 milliseconds |
CONFIG_CCS811_THREAD_PRIORITY
|
Thread priority |
CONFIG_CCS811_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_CCS811_TRIGGER
|
|
CONFIG_CCS811_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_CCS811_TRIGGER_NONE
|
No trigger |
CONFIG_CCS811_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_CDC_ACM_BULK_EP_MPS
|
|
CONFIG_CDC_ACM_DTE_RATE_CALLBACK_SUPPORT
|
Support callbacks when the USB host changes the virtual baud rate |
CONFIG_CDC_ACM_IAD
|
Force using Interface Association Descriptor |
CONFIG_CDC_ACM_INTERRUPT_EP_MPS
|
|
CONFIG_CDC_ECM_BULK_EP_MPS
|
|
CONFIG_CDC_ECM_INTERRUPT_EP_MPS
|
|
CONFIG_CDC_EEM_BULK_EP_MPS
|
|
CONFIG_CFB_LOG_LEVEL
|
|
CONFIG_CFB_LOG_LEVEL_DBG
|
Debug |
CONFIG_CFB_LOG_LEVEL_ERR
|
Error |
CONFIG_CFB_LOG_LEVEL_INF
|
Info |
CONFIG_CFB_LOG_LEVEL_OFF
|
Off |
CONFIG_CFB_LOG_LEVEL_WRN
|
Warning |
CONFIG_CHARACTER_FRAMEBUFFER
|
Character framebuffer for dot matrix displays |
CONFIG_CHARACTER_FRAMEBUFFER_SHELL
|
Character Framebuffer shell |
CONFIG_CHARACTER_FRAMEBUFFER_SHELL_DRIVER_NAME
|
|
CONFIG_CHARACTER_FRAMEBUFFER_USE_DEFAULT_FONTS
|
Use default fonts |
CONFIG_CHECK_BEFORE_READING
|
Verify area before reading it |
CONFIG_CIVETWEB
|
Civetweb Support |
CONFIG_CLEANUP_INTERMEDIATE_FILES
|
Remove all intermediate files |
CONFIG_CLOCK_CONTROL
|
Hardware clock controller support |
CONFIG_CLOCK_CONTROL_BEETLE
|
BEETLE Clock Control |
CONFIG_CLOCK_CONTROL_BEETLE_DEVICE_INIT_PRIORITY
|
Clock Control Device Priority |
CONFIG_CLOCK_CONTROL_BEETLE_ENABLE_PLL
|
Enable PLL on Beetle |
CONFIG_CLOCK_CONTROL_ESP32
|
ESP32 Clock driver |
CONFIG_CLOCK_CONTROL_LITEX
|
LiteX MMCM clock control |
CONFIG_CLOCK_CONTROL_LOG_LEVEL
|
|
CONFIG_CLOCK_CONTROL_LOG_LEVEL_DBG
|
Debug |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_ERR
|
Error |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_INF
|
Info |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_OFF
|
Off |
CONFIG_CLOCK_CONTROL_LOG_LEVEL_WRN
|
Warning |
CONFIG_CLOCK_CONTROL_LPC11U6X
|
LPC11U6X Reset and clock control |
CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_SRAM1
|
Enable SRAM1 |
CONFIG_CLOCK_CONTROL_LPC11U6X_ENABLE_USB_RAM
|
Enable USB RAM |
CONFIG_CLOCK_CONTROL_LPC11U6X_PLL_SRC_IRC
|
IRC |
CONFIG_CLOCK_CONTROL_LPC11U6X_PLL_SRC_SYSOSC
|
SYSOSC |
CONFIG_CLOCK_CONTROL_MCHP_XEC
|
MCHP XEC PCR clock control driver |
CONFIG_CLOCK_CONTROL_MCUX_CCM
|
MCUX CCM driver |
CONFIG_CLOCK_CONTROL_MCUX_CCM_REV2
|
MCUX CCM Rev 2 driver |
CONFIG_CLOCK_CONTROL_MCUX_MCG
|
MCUX MCG driver |
CONFIG_CLOCK_CONTROL_MCUX_PCC
|
MCUX PCC driver |
CONFIG_CLOCK_CONTROL_MCUX_SCG
|
MCUX SCG driver |
CONFIG_CLOCK_CONTROL_MCUX_SIM
|
MCUX SIM driver |
CONFIG_CLOCK_CONTROL_MCUX_SYSCON
|
MCUX LPC clock driver |
CONFIG_CLOCK_CONTROL_NPCX
|
NPCX clock controller driver |
CONFIG_CLOCK_CONTROL_NPCX_EXTERNAL_SRC
|
Generate LFCLK by on-chip Crystal Oscillator |
CONFIG_CLOCK_CONTROL_NRF
|
NRF Clock controller support |
CONFIG_CLOCK_CONTROL_NRF_ACCURACY
|
|
CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_DEBUG
|
Calibration instrumentation |
CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_LF_ALWAYS_ON
|
LF clock is always on |
CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_MAX_SKIP
|
Maximum number of calibration skips |
CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_PERIOD
|
Calibration opportunity period in milliseconds |
CONFIG_CLOCK_CONTROL_NRF_CALIBRATION_TEMP_DIFF
|
Temperature change triggering calibration (in 0.25 degree units) |
CONFIG_CLOCK_CONTROL_NRF_FORCE_ALT
|
|
CONFIG_CLOCK_CONTROL_NRF_K32SRC_100PPM
|
76 ppm to 100 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM
|
101 ppm to 150 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_20PPM
|
0 ppm to 20 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_250PPM
|
151 ppm to 250 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_30PPM
|
21 ppm to 30 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM
|
251 ppm to 500 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_50PPM
|
31 ppm to 50 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_75PPM
|
51 ppm to 75 ppm |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_FULL_SWING
|
External full swing |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_EXT_LOW_SWING
|
External low swing |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC
|
RC Oscillator |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC_CALIBRATION
|
Enable LF clock calibration |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_SYNTH
|
Synthesized from HFCLK |
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL
|
Crystal Oscillator |
CONFIG_CLOCK_CONTROL_NRF_SHELL
|
Shell commands |
CONFIG_CLOCK_CONTROL_NRF_USES_TEMP_SENSOR
|
|
CONFIG_CLOCK_CONTROL_RCAR_CPG_MSSR
|
RCar CPG MSSR driver |
CONFIG_CLOCK_CONTROL_RV32M1_PCC
|
RV32M1 PCC driver |
CONFIG_CLOCK_CONTROL_STM32_CUBE
|
STM32 Reset & Clock Control |
CONFIG_CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY
|
Clock Control Device Priority |
CONFIG_CLOCK_CONTROL_STM32_HAS_DTS
|
|
CONFIG_CLOCK_STM32_AHB3_PRESCALER
|
AHB3 HCLK prescaler |
CONFIG_CLOCK_STM32_AHB4_PRESCALER
|
AHB4 HCLK prescaler |
CONFIG_CLOCK_STM32_AHB_PRESCALER
|
AHB prescaler |
CONFIG_CLOCK_STM32_APB1_PRESCALER
|
APB1 prescaler |
CONFIG_CLOCK_STM32_APB2_PRESCALER
|
APB2 prescaler |
CONFIG_CLOCK_STM32_CPU1_PRESCALER
|
CPU1 HCLK prescaler |
CONFIG_CLOCK_STM32_CPU2_PRESCALER
|
CPU2 HCLK prescaler |
CONFIG_CLOCK_STM32_D1CPRE
|
D1 Domain, CPU1 clock prescaler |
CONFIG_CLOCK_STM32_D1PPRE
|
D1 DOMAIN, APB3 prescaler |
CONFIG_CLOCK_STM32_D2PPRE1
|
APB1 prescaler |
CONFIG_CLOCK_STM32_D2PPRE2
|
D2 DOMAIN, APB2 prescaler |
CONFIG_CLOCK_STM32_D3PPRE
|
APB4 prescaler |
CONFIG_CLOCK_STM32_HPRE
|
hclk prescaler, D2 domain (CPU2) Clock prescaler |
CONFIG_CLOCK_STM32_HSE_BYPASS
|
HSE bypass |
CONFIG_CLOCK_STM32_HSE_CLOCK
|
HSE clock value |
CONFIG_CLOCK_STM32_HSI_DIVISOR
|
HSI Divisor |
CONFIG_CLOCK_STM32_LSE
|
Low-speed external clock |
CONFIG_CLOCK_STM32_MCO1_DIV
|
MCO1 prescaler |
CONFIG_CLOCK_STM32_MCO1_SRC_HSE
|
HSE |
CONFIG_CLOCK_STM32_MCO1_SRC_HSI
|
HSI |
CONFIG_CLOCK_STM32_MCO1_SRC_LSE
|
LSE |
CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK
|
NOCLOCK |
CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK
|
PLLCLK |
CONFIG_CLOCK_STM32_MCO2_DIV
|
MCO2 prescaler |
CONFIG_CLOCK_STM32_MCO2_SRC_HSE
|
HSE |
CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK
|
NOCLOCK |
CONFIG_CLOCK_STM32_MCO2_SRC_PLLCLK
|
PLLCLK |
CONFIG_CLOCK_STM32_MCO2_SRC_PLLI2S
|
PLLI2S |
CONFIG_CLOCK_STM32_MCO2_SRC_SYSCLK
|
SYSCLK |
CONFIG_CLOCK_STM32_MSI_PLL_MODE
|
MSI PLL MODE |
CONFIG_CLOCK_STM32_MSI_RANGE
|
MSI frequency range |
CONFIG_CLOCK_STM32_PLL3_ENABLE
|
Enable PLL3 |
CONFIG_CLOCK_STM32_PLL3_M_DIVISOR
|
PLL3 divisor |
CONFIG_CLOCK_STM32_PLL3_N_MULTIPLIER
|
PLL3 VCO multiplier |
CONFIG_CLOCK_STM32_PLL3_P_DIVISOR
|
PLL3 P Divisor |
CONFIG_CLOCK_STM32_PLL3_P_ENABLE
|
Enable PLL3 P output |
CONFIG_CLOCK_STM32_PLL3_Q_DIVISOR
|
PLL3 Q Divisor |
CONFIG_CLOCK_STM32_PLL3_Q_ENABLE
|
Enable PLL3 Q output |
CONFIG_CLOCK_STM32_PLL3_R_DIVISOR
|
PLL3 R Divisor |
CONFIG_CLOCK_STM32_PLL3_R_ENABLE
|
Enable PLL3 R output |
CONFIG_CLOCK_STM32_PLL_DIVISOR
|
PLL divisor |
CONFIG_CLOCK_STM32_PLL_MULTIPLIER
|
PLL multiplier |
CONFIG_CLOCK_STM32_PLL_M_DIVISOR
|
Division factor for PLL VCO input clock |
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER
|
Multiplier factor for PLL VCO output clock |
CONFIG_CLOCK_STM32_PLL_PREDIV
|
PREDIV Prescaler |
CONFIG_CLOCK_STM32_PLL_PREDIV1
|
PREDIV1 Prescaler |
CONFIG_CLOCK_STM32_PLL_P_DIVISOR
|
PLL division factor for main system clock |
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR
|
Division factor for OTG FS, SDIO and RNG clocks |
CONFIG_CLOCK_STM32_PLL_R_DIVISOR
|
PLL R Divisor |
CONFIG_CLOCK_STM32_PLL_SRC_CSI
|
CSI |
CONFIG_CLOCK_STM32_PLL_SRC_HSE
|
HSE |
CONFIG_CLOCK_STM32_PLL_SRC_HSI
|
HSI |
CONFIG_CLOCK_STM32_PLL_SRC_MSI
|
MSI |
CONFIG_CLOCK_STM32_PLL_SRC_PLL2
|
PLL2 |
CONFIG_CLOCK_STM32_PLL_XTPRE
|
HSE to PLL /2 prescaler |
CONFIG_CLOCK_STM32_SYSCLK_SRC_CSI
|
CSI |
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE
|
HSE |
CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI
|
HSI |
CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI
|
MSI |
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL
|
PLL |
CONFIG_CMSIS_DSP
|
CMSIS-DSP Library Support |
CONFIG_CMSIS_DSP_AUTOVECTORIZE
|
Auto Vectorize |
CONFIG_CMSIS_DSP_BASICMATH
|
Basic Math Functions |
CONFIG_CMSIS_DSP_BAYES
|
Bayesian Estimators |
CONFIG_CMSIS_DSP_COMPLEXMATH
|
Complex Math Functions |
CONFIG_CMSIS_DSP_CONTROLLER
|
Controller Functions |
CONFIG_CMSIS_DSP_DISTANCE
|
Distance Functions |
CONFIG_CMSIS_DSP_FASTMATH
|
Fast Math Functions |
CONFIG_CMSIS_DSP_FILTERING
|
Filtering Functions |
CONFIG_CMSIS_DSP_LOOPUNROLL
|
Loop Unrolling |
CONFIG_CMSIS_DSP_MATRIX
|
Matrix Functions |
CONFIG_CMSIS_DSP_MATRIXCHECK
|
Matrix Check |
CONFIG_CMSIS_DSP_NEON
|
Neon Instruction Set |
CONFIG_CMSIS_DSP_ROUNDING
|
Rounding |
CONFIG_CMSIS_DSP_STATISTICS
|
Statistics Functions |
CONFIG_CMSIS_DSP_SUPPORT
|
Support Functions |
CONFIG_CMSIS_DSP_SVM
|
Support Vector Machine Functions |
CONFIG_CMSIS_DSP_TABLES
|
Look-up Tables |
CONFIG_CMSIS_DSP_TABLES_ALL_FAST
|
Include all fast interpolation tables |
CONFIG_CMSIS_DSP_TABLES_ALL_FFT
|
Include all FFT tables |
CONFIG_CMSIS_DSP_TABLES_ARM_CMPLX_MAG_Q15
|
cmplx mag q15 |
CONFIG_CMSIS_DSP_TABLES_ARM_CMPLX_MAG_Q31
|
cmplx mag q31 |
CONFIG_CMSIS_DSP_TABLES_ARM_COS_F32
|
cos f32 |
CONFIG_CMSIS_DSP_TABLES_ARM_COS_Q15
|
cos q15 |
CONFIG_CMSIS_DSP_TABLES_ARM_COS_Q31
|
cos q31 |
CONFIG_CMSIS_DSP_TABLES_ARM_LMS_NORM_Q15
|
lms norm q15 |
CONFIG_CMSIS_DSP_TABLES_ARM_LMS_NORM_Q31
|
lms norm q31 |
CONFIG_CMSIS_DSP_TABLES_ARM_SIN_COS_F32
|
sin cos f32 |
CONFIG_CMSIS_DSP_TABLES_ARM_SIN_COS_Q31
|
sin cos q31 |
CONFIG_CMSIS_DSP_TABLES_ARM_SIN_F32
|
sin f32 |
CONFIG_CMSIS_DSP_TABLES_ARM_SIN_Q15
|
sin q15 |
CONFIG_CMSIS_DSP_TABLES_ARM_SIN_Q31
|
sin q31 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_1024
|
cfft f32 1024 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_128
|
cfft f32 128 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_16
|
cfft f32 16 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_2048
|
cfft f32 2048 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_256
|
cfft f32 256 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_32
|
cfft f32 32 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_4096
|
cfft f32 4096 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_512
|
cfft f32 512 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F32_64
|
cfft f32 64 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_1024
|
cfft f64 1024 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_128
|
cfft f64 128 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_16
|
cfft f64 16 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_2048
|
cfft f64 2048 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_256
|
cfft f64 256 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_32
|
cfft f64 32 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_4096
|
cfft f64 4096 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_512
|
cfft f64 512 |
CONFIG_CMSIS_DSP_TABLES_CFFT_F64_64
|
cfft f64 64 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_1024
|
cfft q15 1024 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_128
|
cfft q15 128 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_16
|
cfft q15 16 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_2048
|
cfft q15 2048 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_256
|
cfft q15 256 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_32
|
cfft q15 32 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_4096
|
cfft q15 4096 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_512
|
cfft q15 512 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q15_64
|
cfft q15 64 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_1024
|
cfft q31 1024 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_128
|
cfft q31 128 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_16
|
cfft q31 16 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_2048
|
cfft q31 2048 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_256
|
cfft q31 256 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_32
|
cfft q31 32 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_4096
|
cfft q31 4096 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_512
|
cfft q31 512 |
CONFIG_CMSIS_DSP_TABLES_CFFT_Q31_64
|
cfft q31 64 |
CONFIG_CMSIS_DSP_TABLES_DCT4_F32_128
|
dct4 f32 128 |
CONFIG_CMSIS_DSP_TABLES_DCT4_F32_2048
|
dct4 f32 2048 |
CONFIG_CMSIS_DSP_TABLES_DCT4_F32_512
|
dct4 f32 512 |
CONFIG_CMSIS_DSP_TABLES_DCT4_F32_8192
|
dct4 f32 8192 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_128
|
dct4 q15 128 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_2048
|
dct4 q15 2048 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_512
|
dct4 q15 512 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q15_8192
|
dct4 q15 8192 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_128
|
dct4 q31 128 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_2048
|
dct4 q31 2048 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_512
|
dct4 q31 512 |
CONFIG_CMSIS_DSP_TABLES_DCT4_Q31_8192
|
dct4 q31 8192 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F32_128
|
rfft f32 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F32_2048
|
rfft f32 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F32_512
|
rfft f32 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F32_8192
|
rfft f32 8192 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F64_128
|
rfft f64 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F64_2048
|
rfft f64 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F64_512
|
rfft f64 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_F64_8192
|
rfft f64 8192 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_1024
|
rfft fast f32 1024 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_128
|
rfft fast f32 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_2048
|
rfft fast f32 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_256
|
rfft fast f32 256 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_32
|
rfft fast f32 32 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_4096
|
rfft fast f32 4096 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_512
|
rfft fast f32 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F32_64
|
rfft fast f32 64 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_1024
|
rfft fast f64 1024 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_128
|
rfft fast f64 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_2048
|
rfft fast f64 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_256
|
rfft fast f64 256 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_32
|
rfft fast f64 32 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_4096
|
rfft fast f64 4096 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_512
|
rfft fast f64 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_FAST_F64_64
|
rfft fast f64 64 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_1024
|
rfft q15 1024 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_128
|
rfft q15 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_2048
|
rfft q15 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_256
|
rfft q15 256 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_32
|
rfft q15 32 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_4096
|
rfft q15 4096 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_512
|
rfft q15 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_64
|
rfft q15 64 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q15_8192
|
rfft q15 8192 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_1024
|
rfft q31 1024 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_128
|
rfft q31 128 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_2048
|
rfft q31 2048 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_256
|
rfft q31 256 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_32
|
rfft q31 32 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_4096
|
rfft q31 4096 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_512
|
rfft q31 512 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_64
|
rfft q31 64 |
CONFIG_CMSIS_DSP_TABLES_RFFT_Q31_8192
|
rfft q31 8192 |
CONFIG_CMSIS_DSP_TRANSFORM
|
Transform Functions |
CONFIG_CMSIS_MUTEX_MAX_COUNT
|
Maximum mutex count in CMSIS application |
CONFIG_CMSIS_RTOS_V1
|
CMSIS RTOS v1 API |
CONFIG_CMSIS_RTOS_V2
|
CMSIS RTOS v2 API |
CONFIG_CMSIS_SEMAPHORE_MAX_COUNT
|
Maximum semaphore count in CMSIS application |
CONFIG_CMSIS_THREAD_MAX_STACK_SIZE
|
Max stack size threads can be allocated in CMSIS RTOS application |
CONFIG_CMSIS_TIMER_MAX_COUNT
|
Maximum timer count in CMSIS application |
CONFIG_CMSIS_V2_EVT_FLAGS_MAX_COUNT
|
Maximum event flags count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MEM_SLAB_MAX_COUNT
|
Maximum mem slab count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MEM_SLAB_MAX_DYNAMIC_SIZE
|
Maximum dynamic mem slab/pool size in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MSGQ_MAX_COUNT
|
Maximum message queue count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MSGQ_MAX_DYNAMIC_SIZE
|
Maximum dynamic message queue size in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_MUTEX_MAX_COUNT
|
Maximum mutex count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_SEMAPHORE_MAX_COUNT
|
Maximum semaphore count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT
|
Maximum dynamic thread count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_DYNAMIC_STACK_SIZE
|
Dynamic stack size threads are allocated in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_MAX_COUNT
|
Maximum thread count in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_THREAD_MAX_STACK_SIZE
|
Max stack size threads can be allocated in CMSIS RTOS V2 application |
CONFIG_CMSIS_V2_TIMER_MAX_COUNT
|
Maximum timer count in CMSIS RTOS V2 application |
CONFIG_CMU_HFCLK_HFRCO
|
Internal high frequency RC oscillator |
CONFIG_CMU_HFCLK_HFXO
|
External high frequency crystal oscillator |
CONFIG_CMU_HFCLK_LFXO
|
External low frequency crystal oscillator |
CONFIG_CMU_HFRCO_FREQ
|
Internal high frequency RC oscillator frequency |
CONFIG_CMU_HFXO_FREQ
|
External high frequency oscillator frequency |
CONFIG_CMU_LFXO_FREQ
|
External low frequency oscillator frequency |
CONFIG_COAP
|
CoAP Support |
CONFIG_COAP_EXTENDED_OPTIONS_LEN
|
Support for CoAP extended options |
CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE
|
CoAP extended options length value |
CONFIG_COAP_INIT_ACK_TIMEOUT_MS
|
base length of the random generated initial ACK timeout in ms |
CONFIG_COAP_KEEP_USER_DATA
|
Enable keeping user data in the CoAP packet |
CONFIG_COAP_LOG_LEVEL
|
|
CONFIG_COAP_LOG_LEVEL_DBG
|
Debug |
CONFIG_COAP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_COAP_LOG_LEVEL_ERR
|
Error |
CONFIG_COAP_LOG_LEVEL_INF
|
Info |
CONFIG_COAP_LOG_LEVEL_OFF
|
Off |
CONFIG_COAP_LOG_LEVEL_WRN
|
Warning |
CONFIG_COAP_RANDOMIZE_ACK_TIMEOUT
|
Randomize initial ACK timeout, as specified in RFC 7252 |
CONFIG_COAP_TEST_API_ENABLE
|
Enable test API for CoAP unit tests |
CONFIG_COAP_URI_WILDCARD
|
Enable wildcards in CoAP resource path |
CONFIG_COAP_UTILS_LOG_LEVEL
|
|
CONFIG_COAP_UTILS_LOG_LEVEL_DBG
|
Debug |
CONFIG_COAP_UTILS_LOG_LEVEL_ERR
|
Error |
CONFIG_COAP_UTILS_LOG_LEVEL_INF
|
Info |
CONFIG_COAP_UTILS_LOG_LEVEL_OFF
|
Off |
CONFIG_COAP_UTILS_LOG_LEVEL_WRN
|
Warning |
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE
|
CoAP ./well-known/core services block wise support |
CONFIG_COAP_WELL_KNOWN_BLOCK_WISE_SIZE
|
CoAP ./well-known/core services block wise support |
CONFIG_CODE_DATA_RELOCATION
|
Relocate code/data sections |
CONFIG_CODE_DATA_RELOCATION_SRAM
|
Relocate code/data sections to SRAM |
CONFIG_CODE_DENSITY
|
Code Density Option |
CONFIG_CODE_FLEXSPI
|
Link code into external FlexSPI-controlled memory |
CONFIG_CODE_FLEXSPI2
|
Link code into internal FlexSPI-controlled memory |
CONFIG_CODE_ITCM
|
Link code into internal instruction tightly coupled memory (ITCM) |
CONFIG_CODE_SEMC
|
Link code into external SEMC-controlled memory |
CONFIG_CODE_SRAM0
|
Link code into RAM_L memory (RAM_L) |
CONFIG_CODING_GUIDELINE_CHECK
|
Enforce coding guideline rules |
CONFIG_COMPAT_INCLUDES
|
Suppress warnings when using header shims |
CONFIG_COMPILER_COLOR_DIAGNOSTICS
|
Enable colored diganostics |
CONFIG_COMPILER_ISA_THUMB2
|
Compile C/C++ functions using Thumb-2 instruction set |
CONFIG_COMPILER_OPT
|
Custom compiler options |
CONFIG_COMPRESSED_ISA
|
|
CONFIG_CONSOLE
|
Console drivers |
CONFIG_CONSOLE_GETCHAR
|
Character by character input and output |
CONFIG_CONSOLE_GETCHAR_BUFSIZE
|
console_getchar() buffer size |
CONFIG_CONSOLE_GETLINE
|
Line by line input |
CONFIG_CONSOLE_HANDLER
|
Enable console input handler |
CONFIG_CONSOLE_HAS_DRIVER
|
|
CONFIG_CONSOLE_INPUT_MAX_LINE_LEN
|
Console maximum input line length |
CONFIG_CONSOLE_PUTCHAR_BUFSIZE
|
console_putchar() buffer size |
CONFIG_CONSOLE_SUBSYS
|
Console subsystem/support routines [EXPERIMENTAL] |
CONFIG_COOP_ENABLED
|
|
CONFIG_CORE_E31
|
Use E31 core |
CONFIG_CORTEX_M_DWT
|
Enable and use the DWT |
CONFIG_CORTEX_M_NULL_POINTER_EXCEPTION
|
|
CONFIG_CORTEX_M_NULL_POINTER_EXCEPTION_PAGE_SIZE
|
Size of paged unmapped to implement null pointer detection |
CONFIG_CORTEX_M_SYSTICK
|
Cortex-M SYSTICK timer |
CONFIG_COUNTER
|
Counter Drivers |
CONFIG_COUNTER_CMOS
|
Counter driver for x86 CMOS/RTC clock |
CONFIG_COUNTER_ESP32
|
ESP32 Counter Driver |
CONFIG_COUNTER_ESP32_PRESCALER
|
Prescaling value for counter device |
CONFIG_COUNTER_ESP32_TG0_T0
|
TG0_T0 enable/disable option |
CONFIG_COUNTER_ESP32_TG0_T1
|
TG0_T1 enable/disable option |
CONFIG_COUNTER_ESP32_TG1_T0
|
TG1_T0 enable/disable option |
CONFIG_COUNTER_ESP32_TG1_T1
|
TG1_T1 enable/disable option |
CONFIG_COUNTER_GECKO_RTCC
|
Silicon Labs Gecko Counter (RTCC) driver |
CONFIG_COUNTER_IMX_EPIT
|
IMX EPIT driver |
CONFIG_COUNTER_LOG_LEVEL
|
|
CONFIG_COUNTER_LOG_LEVEL_DBG
|
Debug |
CONFIG_COUNTER_LOG_LEVEL_ERR
|
Error |
CONFIG_COUNTER_LOG_LEVEL_INF
|
Info |
CONFIG_COUNTER_LOG_LEVEL_OFF
|
Off |
CONFIG_COUNTER_LOG_LEVEL_WRN
|
Warning |
CONFIG_COUNTER_MAXIM_DS3231
|
Maxim DS3231 RTC/TCXO |
CONFIG_COUNTER_MAXIM_DS3231_INIT_PRIORITY
|
Init priority |
CONFIG_COUNTER_MCUX_GPT
|
MCUX GPT driver |
CONFIG_COUNTER_MCUX_LPC_RTC
|
MCUX LPC RTC driver |
CONFIG_COUNTER_MCUX_LPTMR
|
MCUX LPTMR driver |
CONFIG_COUNTER_MCUX_PIT
|
MCUX PIT driver |
CONFIG_COUNTER_MCUX_RTC
|
MCUX RTC driver |
CONFIG_COUNTER_NATIVE_POSIX
|
Enable counter on COUNTER_0 |
CONFIG_COUNTER_NATIVE_POSIX_FREQUENCY
|
native_posix counter frequency in Hz |
CONFIG_COUNTER_NRF_RTC
|
|
CONFIG_COUNTER_NRF_TIMER
|
|
CONFIG_COUNTER_RTC0
|
Enable Counter on RTC0 |
CONFIG_COUNTER_RTC1
|
Enable Counter on RTC1 |
CONFIG_COUNTER_RTC2
|
Enable Counter on RTC2 |
CONFIG_COUNTER_RTC_CUSTOM_TOP_SUPPORT
|
|
CONFIG_COUNTER_RTC_STM32
|
STM32 Counter RTC driver |
CONFIG_COUNTER_RTC_STM32_BACKUP_DOMAIN_RESET
|
Do backup domain reset |
CONFIG_COUNTER_RTC_STM32_CLOCK_LSE
|
LSE |
CONFIG_COUNTER_RTC_STM32_CLOCK_LSI
|
LSI |
CONFIG_COUNTER_RTC_STM32_LSE_BYPASS
|
LSE oscillator bypass |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_HIGH
|
High |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_LOW
|
Low |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMHIGH
|
Medium High |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_MEDIUMLOW
|
Medium Low |
CONFIG_COUNTER_RTC_STM32_LSE_DRIVE_STRENGTH
|
|
CONFIG_COUNTER_RTC_STM32_SAVE_VALUE_BETWEEN_RESETS
|
Save rtc time value between resets |
CONFIG_COUNTER_RTC_WITH_PPI_WRAP
|
|
CONFIG_COUNTER_SAM0_TC32
|
SAM0 series 32-bit basic timer driver |
CONFIG_COUNTER_SAM_TC
|
Atmel SAM MCU family counter (TC) driver |
CONFIG_COUNTER_TIMER0
|
Enable Counter on TIMER0 |
CONFIG_COUNTER_TIMER1
|
Enable Counter on TIMER1 |
CONFIG_COUNTER_TIMER2
|
Enable Counter on TIMER2 |
CONFIG_COUNTER_TIMER3
|
Enable Counter on TIMER3 |
CONFIG_COUNTER_TIMER4
|
Enable Counter on TIMER4 |
CONFIG_COUNTER_XEC
|
Microchip XEC series counter driver |
CONFIG_COUNTER_XLNX_AXI_TIMER
|
Xilinx AXI Timer driver |
CONFIG_COVERAGE
|
Create coverage data |
CONFIG_COVERAGE_DUMP
|
Dump coverage data on exit |
CONFIG_COVERAGE_GCOV
|
Create Coverage data from hardware platform |
CONFIG_CPLUSPLUS
|
C++ support for the application |
CONFIG_CPU_AARCH64_CORTEX_R
|
|
CONFIG_CPU_APOLLO_LAKE
|
|
CONFIG_CPU_ARCEM
|
|
CONFIG_CPU_ARCHS
|
|
CONFIG_CPU_ATOM
|
|
CONFIG_CPU_CORTEX
|
|
CONFIG_CPU_CORTEX_A
|
|
CONFIG_CPU_CORTEX_A53
|
|
CONFIG_CPU_CORTEX_A72
|
|
CONFIG_CPU_CORTEX_M
|
|
CONFIG_CPU_CORTEX_M0
|
|
CONFIG_CPU_CORTEX_M0PLUS
|
|
CONFIG_CPU_CORTEX_M0_HAS_VECTOR_TABLE_REMAP
|
|
CONFIG_CPU_CORTEX_M1
|
|
CONFIG_CPU_CORTEX_M23
|
|
CONFIG_CPU_CORTEX_M3
|
|
CONFIG_CPU_CORTEX_M33
|
|
CONFIG_CPU_CORTEX_M4
|
|
CONFIG_CPU_CORTEX_M55
|
|
CONFIG_CPU_CORTEX_M7
|
|
CONFIG_CPU_CORTEX_M_HAS_BASEPRI
|
|
CONFIG_CPU_CORTEX_M_HAS_CMSE
|
|
CONFIG_CPU_CORTEX_M_HAS_DWT
|
|
CONFIG_CPU_CORTEX_M_HAS_PROGRAMMABLE_FAULT_PRIOS
|
|
CONFIG_CPU_CORTEX_M_HAS_SPLIM
|
|
CONFIG_CPU_CORTEX_M_HAS_SYSTICK
|
|
CONFIG_CPU_CORTEX_M_HAS_VTOR
|
|
CONFIG_CPU_CORTEX_R
|
|
CONFIG_CPU_CORTEX_R4
|
|
CONFIG_CPU_CORTEX_R5
|
|
CONFIG_CPU_CORTEX_R7
|
|
CONFIG_CPU_CORTEX_R82
|
|
CONFIG_CPU_EM4
|
|
CONFIG_CPU_EM4_DMIPS
|
|
CONFIG_CPU_EM4_FPUDA
|
|
CONFIG_CPU_EM4_FPUS
|
|
CONFIG_CPU_EM6
|
|
CONFIG_CPU_HAS_ARM_MPU
|
|
CONFIG_CPU_HAS_ARM_SAU
|
|
CONFIG_CPU_HAS_CUSTOM_FIXED_SOC_MPU_REGIONS
|
Custom fixed SoC MPU region definition |
CONFIG_CPU_HAS_DCLS
|
|
CONFIG_CPU_HAS_FPU
|
|
CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION
|
|
CONFIG_CPU_HAS_MMU
|
|
CONFIG_CPU_HAS_MPU
|
|
CONFIG_CPU_HAS_NRF_IDAU
|
|
CONFIG_CPU_HAS_NXP_MPU
|
|
CONFIG_CPU_HAS_TEE
|
|
CONFIG_CPU_HS3X
|
|
CONFIG_CPU_HS6X
|
|
CONFIG_CPU_LAKEMONT
|
|
CONFIG_CPU_LOAD_LOG_LEVEL
|
|
CONFIG_CPU_LOAD_LOG_LEVEL_DBG
|
Debug |
CONFIG_CPU_LOAD_LOG_LEVEL_ERR
|
Error |
CONFIG_CPU_LOAD_LOG_LEVEL_INF
|
Info |
CONFIG_CPU_LOAD_LOG_LEVEL_OFF
|
Off |
CONFIG_CPU_LOAD_LOG_LEVEL_WRN
|
Warning |
CONFIG_CPU_NIOS2_GEN2
|
|
CONFIG_CRYPTO
|
Crypto Drivers [EXPERIMENTAL] |
CONFIG_CRYPTO_ATAES132A
|
Atmel ATAES132A 32k AES Serial EEPROM support |
CONFIG_CRYPTO_ATAES132A_DRV_NAME
|
Driver’s name |
CONFIG_CRYPTO_ATAES132A_I2C_ADDR
|
ATAES132A I2C address |
CONFIG_CRYPTO_ATAES132A_I2C_PORT_NAME
|
I2C master controller port name |
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_FAST
|
Fast |
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD
|
Standard |
CONFIG_CRYPTO_INIT_PRIORITY
|
Crypto devices init priority |
CONFIG_CRYPTO_LOG_LEVEL
|
|
CONFIG_CRYPTO_LOG_LEVEL_DBG
|
Debug |
CONFIG_CRYPTO_LOG_LEVEL_ERR
|
Error |
CONFIG_CRYPTO_LOG_LEVEL_INF
|
Info |
CONFIG_CRYPTO_LOG_LEVEL_OFF
|
Off |
CONFIG_CRYPTO_LOG_LEVEL_WRN
|
Warning |
CONFIG_CRYPTO_MBEDTLS_SHIM
|
Enable mbedTLS shim driver [EXPERIMENTAL] |
CONFIG_CRYPTO_MBEDTLS_SHIM_DRV_NAME
|
Device name for mbedTLS Pseudo device |
CONFIG_CRYPTO_MBEDTLS_SHIM_MAX_SESSION
|
Maximum of sessions mbedTLS shim driver can handle |
CONFIG_CRYPTO_NRF_ECB
|
nRF AES electronic codebook mode encryption |
CONFIG_CRYPTO_STM32
|
STM32 Cryptographic Accelerator driver |
CONFIG_CRYPTO_STM32_MAX_SESSION
|
Maximum of sessions STM32 crypto driver can handle |
CONFIG_CRYPTO_TINYCRYPT_SHIM
|
Enable TinyCrypt shim driver [EXPERIMENTAL] |
CONFIG_CRYPTO_TINYCRYPT_SHIM_DRV_NAME
|
Device name for TinyCrypt Pseudo device |
CONFIG_CRYPTO_TINYCRYPT_SHIM_MAX_SESSION
|
Maximum of sessions TinyCrypt shim driver can handle |
CONFIG_CSPRING_ENABLED
|
|
CONFIG_CS_CTR_DRBG_PERSONALIZATION
|
CTR-DRBG Personalization string |
CONFIG_CTR_DRBG_CSPRNG_GENERATOR
|
Use CTR-DRBG CSPRNG |
CONFIG_CUSTOM_LINKER_SCRIPT
|
Path to custom linker script |
CONFIG_CUSTOM_MBEDTLS_CFG_FILE
|
Custom mbed TLS configuration file |
CONFIG_CUSTOM_OPENTHREAD_SECURITY
|
Custom |
CONFIG_CUSTOM_SECTION_ALIGN
|
Custom Section Align |
CONFIG_CUSTOM_SECTION_MIN_ALIGN_SIZE
|
Custom Section Align Size |
CONFIG_D0WD_PSRAM_CLK_IO
|
PSRAM CLK IO number |
CONFIG_D0WD_PSRAM_CS_IO
|
PSRAM CS IO number |
CONFIG_D2WD_PSRAM_CLK_IO
|
PSRAM CLK IO number |
CONFIG_D2WD_PSRAM_CS_IO
|
PSRAM CS IO number |
CONFIG_DAC
|
DAC drivers |
CONFIG_DAC_DACX0508
|
TI DACx0508 DAC driver |
CONFIG_DAC_DACX0508_INIT_PRIORITY
|
Init priority |
CONFIG_DAC_DACX3608
|
TI DACX3608 DAC driver |
CONFIG_DAC_DACX3608_INIT_PRIORITY
|
Init priority |
CONFIG_DAC_LOG_LEVEL
|
|
CONFIG_DAC_LOG_LEVEL_DBG
|
Debug |
CONFIG_DAC_LOG_LEVEL_ERR
|
Error |
CONFIG_DAC_LOG_LEVEL_INF
|
Info |
CONFIG_DAC_LOG_LEVEL_OFF
|
Off |
CONFIG_DAC_LOG_LEVEL_WRN
|
Warning |
CONFIG_DAC_MCP4725
|
Microchip MCP4725 DAC driver |
CONFIG_DAC_MCP4725_INIT_PRIORITY
|
Init priority |
CONFIG_DAC_MCUX_DAC
|
NXP Kinetis MCUX DAC driver |
CONFIG_DAC_MCUX_DAC32
|
NXP Kinetis MCUX DAC32 driver |
CONFIG_DAC_MCUX_DAC32_TESTOUT
|
Enable DAC test output |
CONFIG_DAC_SAM0
|
Atmel SAM0 series DAC Driver |
CONFIG_DAC_SHELL
|
Enable DAC shell |
CONFIG_DAC_STM32
|
STM32 DAC driver |
CONFIG_DATE_SHELL
|
Enable date shell |
CONFIG_DATE_TIME_LOG_LEVEL
|
|
CONFIG_DATE_TIME_LOG_LEVEL_DBG
|
Debug |
CONFIG_DATE_TIME_LOG_LEVEL_ERR
|
Error |
CONFIG_DATE_TIME_LOG_LEVEL_INF
|
Info |
CONFIG_DATE_TIME_LOG_LEVEL_OFF
|
Off |
CONFIG_DATE_TIME_LOG_LEVEL_WRN
|
Warning |
CONFIG_DCACHE_LINE_SIZE
|
d-cache line size |
CONFIG_DCACHE_LINE_SIZE_DETECT
|
Detect d-cache line size at runtime |
CONFIG_DEBUG
|
Build kernel with debugging enabled |
CONFIG_DEBUG_COREDUMP
|
Enable Core Dump |
CONFIG_DEBUG_COREDUMP_BACKEND_FLASH_PARTITION
|
Use flash partition for coredump |
CONFIG_DEBUG_COREDUMP_BACKEND_LOGGING
|
Use Logging subsystem for coredump |
CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_LINKER_RAM
|
RAM defined by linker section |
CONFIG_DEBUG_COREDUMP_MEMORY_DUMP_MIN
|
Minimal |
CONFIG_DEBUG_COREDUMP_SHELL
|
Enable Coredump shell |
CONFIG_DEBUG_INFO
|
Enable system debugging information |
CONFIG_DEBUG_OPTIMIZATIONS
|
Optimize debugging experience |
CONFIG_DEBUG_THREAD_INFO
|
Thread awareness support |
CONFIG_DEMAND_PAGING
|
Enable demand paging [EXPERIMENTAL] |
CONFIG_DEMAND_PAGING_ALLOW_IRQ
|
Allow interrupts during page-ins/outs |
CONFIG_DEMAND_PAGING_STATS
|
Gather Demand Paging Statistics |
CONFIG_DEMAND_PAGING_STATS_USING_TIMING_FUNCTIONS
|
Use Timing Functions to Gather Demand Paging Statistics |
CONFIG_DEMAND_PAGING_THREAD_STATS
|
Gather per Thread Demand Paging Statistics |
CONFIG_DEMAND_PAGING_TIMING_HISTOGRAM
|
Gather Demand Paging Execution Timing Histogram |
CONFIG_DEMAND_PAGING_TIMING_HISTOGRAM_NUM_BINS
|
Number of bins (buckets) in Demand Paging Timing Histogrm |
CONFIG_DEVICE_CONFIGURATION_DATA
|
Enable device configuration data |
CONFIG_DEVICE_NAME_GATT_WRITABLE_AUTHEN
|
Authentication required to write name by remote GATT clients |
CONFIG_DEVICE_NAME_GATT_WRITABLE_ENCRYPT
|
Encryption required to write name by remote GATT clients |
CONFIG_DEVICE_POWER_MANAGEMENT
|
Device Power Management |
CONFIG_DEVICE_SHELL
|
Enable device shell |
CONFIG_DEVMEM_SHELL
|
Enable devmem shell |
CONFIG_DFU_TARGET_LOG_LEVEL
|
|
CONFIG_DFU_TARGET_LOG_LEVEL_DBG
|
Debug |
CONFIG_DFU_TARGET_LOG_LEVEL_ERR
|
Error |
CONFIG_DFU_TARGET_LOG_LEVEL_INF
|
Info |
CONFIG_DFU_TARGET_LOG_LEVEL_OFF
|
Off |
CONFIG_DFU_TARGET_LOG_LEVEL_WRN
|
Warning |
CONFIG_DHT
|
DHT Temperature and Humidity Sensor |
CONFIG_DISABLE_SSBD
|
Disable Speculative Store Bypass |
CONFIG_DISABLE_TCM_ECC
|
Disable ECC on TCM |
CONFIG_DISK_ACCESS
|
Disk Interface |
CONFIG_DISK_DRIVERS
|
Disk Drivers |
CONFIG_DISK_DRIVER_FLASH
|
Flash |
CONFIG_DISK_DRIVER_RAM
|
RAM Disk |
CONFIG_DISK_DRIVER_SDMMC
|
SDMMC card driver |
CONFIG_DISK_ERASE_BLOCK_SIZE
|
Flash device erasable block size in hex |
CONFIG_DISK_FLASH_DEV_NAME
|
Flash device name to be used as storage backend |
CONFIG_DISK_FLASH_ERASE_ALIGNMENT
|
Flash device erase alignment in hex |
CONFIG_DISK_FLASH_MAX_RW_SIZE
|
Flash device max read-write size in decimal |
CONFIG_DISK_FLASH_SECTOR_SIZE
|
Flash device sector size |
CONFIG_DISK_FLASH_START
|
Flash device start address in hex |
CONFIG_DISK_FLASH_VOLUME_NAME
|
Flash mount point or drive name |
CONFIG_DISK_LOG_LEVEL
|
|
CONFIG_DISK_LOG_LEVEL_DBG
|
Debug |
CONFIG_DISK_LOG_LEVEL_ERR
|
Error |
CONFIG_DISK_LOG_LEVEL_INF
|
Info |
CONFIG_DISK_LOG_LEVEL_OFF
|
Off |
CONFIG_DISK_LOG_LEVEL_WRN
|
Warning |
CONFIG_DISK_RAM_VOLUME_NAME
|
RAM Disk mount point or drive name |
CONFIG_DISK_RAM_VOLUME_SIZE
|
RAM Disk size in kilobytes |
CONFIG_DISK_VOLUME_SIZE
|
Flash device volume size in hex |
CONFIG_DISPLAY
|
Display Drivers |
CONFIG_DISPLAY_LOG_LEVEL
|
|
CONFIG_DISPLAY_LOG_LEVEL_DBG
|
Debug |
CONFIG_DISPLAY_LOG_LEVEL_ERR
|
Error |
CONFIG_DISPLAY_LOG_LEVEL_INF
|
Info |
CONFIG_DISPLAY_LOG_LEVEL_OFF
|
Off |
CONFIG_DISPLAY_LOG_LEVEL_WRN
|
Warning |
CONFIG_DISPLAY_MCUX_ELCDIF
|
MCUX eLCDIF driver |
CONFIG_DK_LIBRARY_LOG_LEVEL
|
|
CONFIG_DK_LIBRARY_LOG_LEVEL_DBG
|
Debug |
CONFIG_DK_LIBRARY_LOG_LEVEL_ERR
|
Error |
CONFIG_DK_LIBRARY_LOG_LEVEL_INF
|
Info |
CONFIG_DK_LIBRARY_LOG_LEVEL_OFF
|
Off |
CONFIG_DK_LIBRARY_LOG_LEVEL_WRN
|
Warning |
CONFIG_DMA
|
DMA driver Configuration |
CONFIG_DMAMUX_STM32
|
|
CONFIG_DMA_64BIT
|
DMA 64 bit address support |
CONFIG_DMA_DW
|
Enable DesignWare DMA driver |
CONFIG_DMA_IPROC_PAX
|
Broadcom PAX(PCIE<->AXI) DMA driver |
CONFIG_DMA_IPROC_PAX_DEBUG
|
PAX DMA paranoid debug checks |
CONFIG_DMA_IPROC_PAX_DOORBELL_MODE
|
PAX DMA Ring door bell mode |
CONFIG_DMA_IPROC_PAX_IRQ_SYNC
|
PAX DMA synchronous API with interrupt support |
CONFIG_DMA_IPROC_PAX_POLL_MODE
|
PAX DMA API in polling mode |
CONFIG_DMA_IPROC_PAX_TOGGLE_MODE
|
PAX DMA Ring toggle mode |
CONFIG_DMA_IPROC_PAX_V2
|
Broadcom PAX(PCIE<->AXI) DMA driver version 2 |
CONFIG_DMA_LINK_QUEUE_SIZE
|
number of transfer descriptors in a queue for SG mode |
CONFIG_DMA_LOG_LEVEL
|
|
CONFIG_DMA_LOG_LEVEL_DBG
|
Debug |
CONFIG_DMA_LOG_LEVEL_ERR
|
Error |
CONFIG_DMA_LOG_LEVEL_INF
|
Info |
CONFIG_DMA_LOG_LEVEL_OFF
|
Off |
CONFIG_DMA_LOG_LEVEL_WRN
|
Warning |
CONFIG_DMA_MCUX_EDMA
|
Enable MCUX DMA driver |
CONFIG_DMA_MCUX_LPC
|
Enable MCUX LPC DMAC driver |
CONFIG_DMA_MCUX_TEST_SLOT_START
|
test slot start num |
CONFIG_DMA_NIOS2_MSGDMA
|
Nios-II Modular Scatter-Gather DMA(MSGDMA) driver |
CONFIG_DMA_PL330
|
PL330 DMA driver |
CONFIG_DMA_SAM0
|
Atmel SAM0 series DMAC driver |
CONFIG_DMA_SAM_XDMAC
|
Atmel SAM DMA (XDMAC) driver |
CONFIG_DMA_STM32
|
Enable STM32 DMA driver |
CONFIG_DMA_STM32_SHARED_IRQS
|
|
CONFIG_DMA_STM32_V1
|
|
CONFIG_DMA_STM32_V2
|
|
CONFIG_DMA_TCD_QUEUE_SIZE
|
number of TCD in a queue for SG mode |
CONFIG_DNS_NUM_CONCUR_QUERIES
|
Number of simultaneous DNS queries per one DNS context |
CONFIG_DNS_RESOLVER
|
DNS resolver |
CONFIG_DNS_RESOLVER_ADDITIONAL_BUF_CTR
|
Additional DNS buffers |
CONFIG_DNS_RESOLVER_ADDITIONAL_QUERIES
|
Additional DNS queries |
CONFIG_DNS_RESOLVER_AI_MAX_ENTRIES
|
Maximum number of IP addresses for DNS name |
CONFIG_DNS_RESOLVER_LOG_LEVEL
|
|
CONFIG_DNS_RESOLVER_LOG_LEVEL_DBG
|
Debug |
CONFIG_DNS_RESOLVER_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_DNS_RESOLVER_LOG_LEVEL_ERR
|
Error |
CONFIG_DNS_RESOLVER_LOG_LEVEL_INF
|
Info |
CONFIG_DNS_RESOLVER_LOG_LEVEL_OFF
|
Off |
CONFIG_DNS_RESOLVER_LOG_LEVEL_WRN
|
Warning |
CONFIG_DNS_RESOLVER_MAX_SERVERS
|
Number of DNS server addresses |
CONFIG_DNS_SD
|
Enable DNS Service Discovery |
CONFIG_DNS_SD_LOG_LEVEL
|
|
CONFIG_DNS_SD_LOG_LEVEL_DBG
|
Debug |
CONFIG_DNS_SD_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_DNS_SD_LOG_LEVEL_ERR
|
Error |
CONFIG_DNS_SD_LOG_LEVEL_INF
|
Info |
CONFIG_DNS_SD_LOG_LEVEL_OFF
|
Off |
CONFIG_DNS_SD_LOG_LEVEL_WRN
|
Warning |
CONFIG_DNS_SERVER1
|
DNS server 1 |
CONFIG_DNS_SERVER2
|
DNS server 2 |
CONFIG_DNS_SERVER3
|
DNS server 3 |
CONFIG_DNS_SERVER4
|
DNS server 4 |
CONFIG_DNS_SERVER5
|
DNS server 5 |
CONFIG_DNS_SERVER_IP_ADDRESSES
|
Set DNS server IP addresses |
CONFIG_DOMAIN_CPUAPP_BOARD
|
|
CONFIG_DOMAIN_CPUNET_BOARD
|
|
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL
|
|
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_DOWNLOAD_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_DPS310
|
DPS310 sensor |
CONFIG_DPS310_PRESS_OSR_128X
|
x128 |
CONFIG_DPS310_PRESS_OSR_16X
|
x16 |
CONFIG_DPS310_PRESS_OSR_1X
|
x1 |
CONFIG_DPS310_PRESS_OSR_2X
|
x2 |
CONFIG_DPS310_PRESS_OSR_32X
|
x32 |
CONFIG_DPS310_PRESS_OSR_4X
|
x4 |
CONFIG_DPS310_PRESS_OSR_64X
|
x64 |
CONFIG_DPS310_PRESS_OSR_8X
|
x8 |
CONFIG_DPS310_TEMP_OSR_128X
|
x128 |
CONFIG_DPS310_TEMP_OSR_16X
|
x16 |
CONFIG_DPS310_TEMP_OSR_1X
|
x1 |
CONFIG_DPS310_TEMP_OSR_2X
|
x2 |
CONFIG_DPS310_TEMP_OSR_32X
|
x32 |
CONFIG_DPS310_TEMP_OSR_4X
|
x4 |
CONFIG_DPS310_TEMP_OSR_64X
|
x64 |
CONFIG_DPS310_TEMP_OSR_8X
|
x8 |
CONFIG_DSA_KSZ8794
|
Enable support for KSZ8794 |
CONFIG_DSA_KSZ8794_TAIL_TAGGING
|
Enable support for tail tagging on KSZ8794 |
CONFIG_DUMMY_DISPLAY
|
Dummy display driver |
CONFIG_DUMMY_DISPLAY_DEV_NAME
|
Dummy display device name |
CONFIG_DUMMY_DISPLAY_X_RES
|
X resolution for dummy display |
CONFIG_DUMMY_DISPLAY_Y_RES
|
Y resolution for dummy display |
CONFIG_DW_ICTL
|
Designware Interrupt Controller |
CONFIG_DW_ICTL_INIT_PRIORITY
|
Init priority for DW interrupt controller |
CONFIG_DW_ICTL_NAME
|
Name for Designware Interrupt Controller |
CONFIG_DW_ICTL_OFFSET
|
Parent interrupt number to which DW_ICTL maps |
CONFIG_DW_ISR_TBL_OFFSET
|
Offset in the SW ISR Table |
CONFIG_DYNAMIC_DIRECT_INTERRUPTS
|
Enable support for dynamic direct interrupts |
CONFIG_DYNAMIC_INTERRUPTS
|
Enable installation of IRQs at runtime |
CONFIG_DYNAMIC_OBJECTS
|
Allow kernel objects to be allocated at runtime |
CONFIG_EAGER_FPU_SHARING
|
|
CONFIG_EARLY_CONSOLE
|
Send stdout at the earliest stage possible |
CONFIG_EC_HOST_CMD
|
Support Embedded Controller host command handler subsystem |
CONFIG_EC_HOST_CMD_HANDLER_STACK_SIZE
|
Stack size for the EC host command handler thread |
CONFIG_EC_HOST_CMD_HANDLER_TX_BUFFER
|
Buffer size in bytes for TX buffer shared by all EC host commands |
CONFIG_EC_HOST_CMD_PERIPH
|
Embedded Controller Host Command peripheral support |
CONFIG_EC_HOST_CMD_SIMULATOR
|
Embedded Controller Host Command Peripheral Simulator |
CONFIG_EDAC
|
Error Detection and Correction (EDAC) Drivers |
CONFIG_EDAC_ERROR_INJECT
|
Enable EDAC Error Injection mechanism |
CONFIG_EDAC_IBECC
|
In-Band ECC (IBECC) |
CONFIG_EDAC_LOG_LEVEL
|
|
CONFIG_EDAC_LOG_LEVEL_DBG
|
Debug |
CONFIG_EDAC_LOG_LEVEL_ERR
|
Error |
CONFIG_EDAC_LOG_LEVEL_INF
|
Info |
CONFIG_EDAC_LOG_LEVEL_OFF
|
Off |
CONFIG_EDAC_LOG_LEVEL_WRN
|
Warning |
CONFIG_EDAC_SHELL
|
Enable EDAC Shell |
CONFIG_EEPROM
|
EEPROM hardware support |
CONFIG_EEPROM_AT24
|
Atmel AT24 (and compatible) I2C EEPROM support |
CONFIG_EEPROM_AT25
|
Atmel AT25 (and compatible) SPI EEPROM support |
CONFIG_EEPROM_AT2X
|
|
CONFIG_EEPROM_AT2X_INIT_PRIORITY
|
AT2X EEPROM init priority |
CONFIG_EEPROM_EMULATOR
|
Emulated EEPROM driver |
CONFIG_EEPROM_EMULATOR_INIT_PRIORITY
|
EEPROM emulator init priority |
CONFIG_EEPROM_LOG_LEVEL
|
|
CONFIG_EEPROM_LOG_LEVEL_DBG
|
Debug |
CONFIG_EEPROM_LOG_LEVEL_ERR
|
Error |
CONFIG_EEPROM_LOG_LEVEL_INF
|
Info |
CONFIG_EEPROM_LOG_LEVEL_OFF
|
Off |
CONFIG_EEPROM_LOG_LEVEL_WRN
|
Warning |
CONFIG_EEPROM_LPC11U6X
|
LPC11U6x EEPROM driver |
CONFIG_EEPROM_SHELL
|
Enable EEPROM shell |
CONFIG_EEPROM_SHELL_BUFFER_SIZE
|
EEPROM shell buffer size |
CONFIG_EEPROM_SIMULATOR
|
Simulated EEPROM driver |
CONFIG_EEPROM_SIMULATOR_MIN_READ_TIME_US
|
Minimum read time (µS) |
CONFIG_EEPROM_SIMULATOR_MIN_WRITE_TIME_US
|
Minimum write time (µS) |
CONFIG_EEPROM_SIMULATOR_SIMULATE_TIMING
|
Enable hardware timing simulation |
CONFIG_EEPROM_STM32
|
STM32 EEPROM driver |
CONFIG_EI_WRAPPER_LOG_LEVEL
|
|
CONFIG_EI_WRAPPER_LOG_LEVEL_DBG
|
Debug |
CONFIG_EI_WRAPPER_LOG_LEVEL_ERR
|
Error |
CONFIG_EI_WRAPPER_LOG_LEVEL_INF
|
Info |
CONFIG_EI_WRAPPER_LOG_LEVEL_OFF
|
Off |
CONFIG_EI_WRAPPER_LOG_LEVEL_WRN
|
Warning |
CONFIG_EMUL
|
Emulation drivers |
CONFIG_EMUL_BMI160
|
Emulate a Bosch BMI160 accelerometer |
CONFIG_EMUL_EEPROM_AT2X
|
Emulate an Atmel AT24 I2C chip |
CONFIG_EMUL_ESPI_HOST
|
Emulate an eSPI host |
CONFIG_EMUL_INIT_PRIORITY
|
Init priority |
CONFIG_EMUL_LOG_LEVEL
|
|
CONFIG_EMUL_LOG_LEVEL_DBG
|
Debug |
CONFIG_EMUL_LOG_LEVEL_ERR
|
Error |
CONFIG_EMUL_LOG_LEVEL_INF
|
Info |
CONFIG_EMUL_LOG_LEVEL_OFF
|
Off |
CONFIG_EMUL_LOG_LEVEL_WRN
|
Warning |
CONFIG_ENABLE_EXTENDED_IBRS
|
Enable Extended IBRS |
CONFIG_ENABLE_HID_INT_OUT_EP
|
Enable USB HID Device Interrupt OUT Endpoint |
CONFIG_ENS210
|
ENS210 Digital Temperature and Humidity sensor |
CONFIG_ENS210_CRC_CHECK
|
Enable CRC Check |
CONFIG_ENS210_HUMIDITY_CONTINUOUS
|
Enable relative humidity measurements in continuous mode |
CONFIG_ENS210_HUMIDITY_OFF
|
Disable relative humidity measurements |
CONFIG_ENS210_HUMIDITY_SINGLE
|
Enable relative humidity measurements in single shot mode |
CONFIG_ENS210_MAX_READ_RETRIES
|
Number of value reading retries |
CONFIG_ENS210_MAX_STAT_RETRIES
|
Number of status read retries |
CONFIG_ENS210_TEMPERATURE_CONTINUOUS
|
Enable temperature measurements in continuous mode |
CONFIG_ENS210_TEMPERATURE_OFF
|
Disable temperature measurements |
CONFIG_ENS210_TEMPERATURE_SINGLE
|
Enable temperature measurements in single shot mode |
CONFIG_ENTROPY_CC13XX_CC26XX_ALARM_THRESHOLD
|
Threshold for detected repeated patterns |
CONFIG_ENTROPY_CC13XX_CC26XX_POOL_SIZE
|
Number of bytes in the entropy pool |
CONFIG_ENTROPY_CC13XX_CC26XX_RNG
|
TI SimpleLink CC13xx / CC26xx True Random Number Generator (TRNG) |
CONFIG_ENTROPY_CC13XX_CC26XX_SAMPLES_PER_CYCLE
|
Number of samples to generate entropy |
CONFIG_ENTROPY_CC13XX_CC26XX_SHUTDOWN_THRESHOLD
|
Threshold for the number of FROs automatically shut down |
CONFIG_ENTROPY_DEVICE_RANDOM_GENERATOR
|
Use entropy driver to generate random numbers |
CONFIG_ENTROPY_ESP32_RNG
|
ESP32 entropy number generator driver |
CONFIG_ENTROPY_GECKO_TRNG
|
GECKO TRNG driver |
CONFIG_ENTROPY_GENERATOR
|
Entropy Drivers |
CONFIG_ENTROPY_HAS_DRIVER
|
|
CONFIG_ENTROPY_LITEX_RNG
|
PRBS RNG driver |
CONFIG_ENTROPY_MCUX_RNG
|
MCUX RNG driver |
CONFIG_ENTROPY_MCUX_RNGA
|
MCUX RNGA driver |
CONFIG_ENTROPY_MCUX_TRNG
|
MCUX TRNG driver |
CONFIG_ENTROPY_NRF5_BIAS_CORRECTION
|
Enable bias correction (uniform distribution) |
CONFIG_ENTROPY_NRF5_ISR_POOL_SIZE
|
ISR-mode random number pool size |
CONFIG_ENTROPY_NRF5_ISR_THRESHOLD
|
ISR-mode random number pool low-water threshold |
CONFIG_ENTROPY_NRF5_RNG
|
nRF5 RNG driver |
CONFIG_ENTROPY_NRF5_THR_POOL_SIZE
|
Thread-mode random number pool size |
CONFIG_ENTROPY_NRF5_THR_THRESHOLD
|
Thread-mode random number pool low-water threshold |
CONFIG_ENTROPY_NRF_FORCE_ALT
|
|
CONFIG_ENTROPY_RV32M1_TRNG
|
RV32M1 TRNG driver |
CONFIG_ENTROPY_SAM_RNG
|
Atmel SAM MCU Family True Random Number Generator (TRNG) Driver |
CONFIG_ENTROPY_STM32_ISR_POOL_SIZE
|
ISR-mode random number pool size |
CONFIG_ENTROPY_STM32_ISR_THRESHOLD
|
ISR-mode random number pool low-water threshold |
CONFIG_ENTROPY_STM32_RNG
|
STM32 RNG driver |
CONFIG_ENTROPY_STM32_THR_POOL_SIZE
|
Thread-mode random number pool size |
CONFIG_ENTROPY_STM32_THR_THRESHOLD
|
Thread-mode random number pool low-water threshold |
CONFIG_EOS_S3_HAL
|
|
CONFIG_ERRNO
|
Enable errno support |
CONFIG_ERRNO_IN_TLS
|
Store errno in thread local storage (TLS) |
CONFIG_ESP32C3_SYS_TIMER
|
ESP32C3 sys-timer support |
CONFIG_ESP32_BT_RESERVE_DRAM
|
Bluetooth controller reserved RAM region |
CONFIG_ESP32_PHY_MAX_TX_POWER
|
|
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER
|
Max WiFi TX power (dBm) |
CONFIG_ESP32_SPIM
|
ESP32 SPI Master driver |
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES
|
|
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR
|
Four |
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO
|
Two |
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED
|
WiFi AMPDU RX |
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED
|
WiFi AMPDU TX |
CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM
|
Max number of WiFi cache TX buffers |
CONFIG_ESP32_WIFI_CSI_ENABLED
|
WiFi CSI(Channel State Information) |
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
|
Max number of WiFi dynamic RX buffers |
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER
|
Dynamic |
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM
|
Max number of WiFi dynamic TX buffers |
CONFIG_ESP32_WIFI_EVENT_TASK_PRIO
|
Event Task Priority |
CONFIG_ESP32_WIFI_EVENT_TASK_STACK_SIZE
|
Event Task Stack Size |
CONFIG_ESP32_WIFI_IRAM_OPT
|
WiFi IRAM speed optimization |
CONFIG_ESP32_WIFI_PASSWORD
|
Password (WPA or WPA2) of WiFi network |
CONFIG_ESP32_WIFI_RX_BA_WIN
|
WiFi AMPDU RX BA window size |
CONFIG_ESP32_WIFI_RX_IRAM_OPT
|
WiFi RX IRAM speed optimization |
CONFIG_ESP32_WIFI_SSID
|
SSID of WiFi network |
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM
|
Max number of WiFi static RX buffers |
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER
|
Static |
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM
|
Max number of WiFi static TX buffers |
CONFIG_ESP32_WIFI_STA_AUTO
|
Automatically connect to configured WiFi SSID |
CONFIG_ESP32_WIFI_STA_RECONNECT
|
WiFi connection retry |
CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE
|
|
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
Core 0 |
CONFIG_ESP32_WIFI_TX_BA_WIN
|
WiFi AMPDU TX BA window size |
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE
|
|
CONFIG_ESPI
|
ESPI Driver |
CONFIG_ESPI_AUTOMATIC_BOOT_DONE_ACKNOWLEDGE
|
Automatic acknowledge slave boot status |
CONFIG_ESPI_AUTOMATIC_WARNING_ACKNOWLEDGE
|
Automatic acknowledge for eSPI HOST warnings |
CONFIG_ESPI_EMUL
|
eSPI emulator |
CONFIG_ESPI_FLASH_BUFFER_SIZE
|
eSPI Flash channel buffer size in bytes |
CONFIG_ESPI_FLASH_CHANNEL
|
ESPI flash channel |
CONFIG_ESPI_INIT_PRIORITY
|
ESPI Controller driver initialization priority |
CONFIG_ESPI_LOG_LEVEL
|
|
CONFIG_ESPI_LOG_LEVEL_DBG
|
Debug |
CONFIG_ESPI_LOG_LEVEL_ERR
|
Error |
CONFIG_ESPI_LOG_LEVEL_INF
|
Info |
CONFIG_ESPI_LOG_LEVEL_OFF
|
Off |
CONFIG_ESPI_LOG_LEVEL_WRN
|
Warning |
CONFIG_ESPI_NPCX
|
Nuvoton NPCX embedded controller (EC) ESPI driver |
CONFIG_ESPI_NPCX_PERIPHERAL_ACPI_SHD_MEM_SIZE
|
Host I/O peripheral port size for shared memory in npcx series |
CONFIG_ESPI_NPCX_PERIPHERAL_HOST_CMD_PARAM_SIZE
|
Host I/O peripheral port size for ec host command in npcx series |
CONFIG_ESPI_OOB_BUFFER_SIZE
|
eSPI OOB channel buffer size in bytes |
CONFIG_ESPI_OOB_CHANNEL
|
eSPI Out-of-band channel |
CONFIG_ESPI_OOB_CHANNEL_RX_ASYNC
|
OOB host-initiated traffic handling |
CONFIG_ESPI_PERIPHERAL_8042_KBC
|
8042 kbc peripheral |
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION
|
Host peripheral device support shared memory region |
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION_PORT_NUM
|
Host I/O peripheral port number for shared memory region |
CONFIG_ESPI_PERIPHERAL_CHANNEL
|
eSPI peripheral channel |
CONFIG_ESPI_PERIPHERAL_CUSTOM_OPCODE
|
Host peripheral device support customized opcode |
CONFIG_ESPI_PERIPHERAL_DEBUG_PORT_80
|
Debug Port 80 peripheral |
CONFIG_ESPI_PERIPHERAL_EC_HOST_CMD
|
Host peripheral device support EC host command subsystem |
CONFIG_ESPI_PERIPHERAL_HOST_CMD_DATA_PORT_NUM
|
Host I/O peripheral port number for ec host command data |
CONFIG_ESPI_PERIPHERAL_HOST_CMD_PARAM_PORT_NUM
|
Host I/O peripheral port number for ec host command parameters |
CONFIG_ESPI_PERIPHERAL_HOST_IO
|
Host I/O peripheral |
CONFIG_ESPI_PERIPHERAL_HOST_IO_PVT
|
Host I/O peripheral Private Channel |
CONFIG_ESPI_PERIPHERAL_HOST_IO_PVT_PORT_NUM
|
Host I/O peripheral Private Channel |
CONFIG_ESPI_PERIPHERAL_UART
|
UART peripheral |
CONFIG_ESPI_PERIPHERAL_UART_SOC_MAPPING
|
SoC port exposed as logical eSPI UART |
CONFIG_ESPI_SAF
|
XEC Microchip ESPI SAF driver |
CONFIG_ESPI_SAF_INIT_PRIORITY
|
ESPI SAF driver initialization priority |
CONFIG_ESPI_SLAVE
|
ESPI slave driver |
CONFIG_ESPI_VWIRE_CHANNEL
|
eSPI virtual wire channel |
CONFIG_ESPI_XEC
|
XEC Microchip ESPI driver |
CONFIG_ESPTOOLPY_FLASHFREQ_80M
|
|
CONFIG_ESP_HEAP_MEM_POOL_REGION_1_SIZE
|
Internal DRAM region 1 mempool size |
CONFIG_ESP_HEAP_MIN_EXTRAM_THRESHOLD
|
Minimum threshold for external RAM allocation |
CONFIG_ESP_HEAP_SEARCH_ALL_REGIONS
|
Search for all available heap regions |
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT
|
|
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH
|
|
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP
|
|
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA
|
|
CONFIG_ESP_SPIRAM
|
Support for external, SPI-connected RAM |
CONFIG_ESP_SPIRAM_SIZE
|
Size of SPIRAM part |
CONFIG_ETHERNET_LOG_LEVEL
|
|
CONFIG_ETHERNET_LOG_LEVEL_DBG
|
Debug |
CONFIG_ETHERNET_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_ETHERNET_LOG_LEVEL_ERR
|
Error |
CONFIG_ETHERNET_LOG_LEVEL_INF
|
Info |
CONFIG_ETHERNET_LOG_LEVEL_OFF
|
Off |
CONFIG_ETHERNET_LOG_LEVEL_WRN
|
Warning |
CONFIG_ETH_E1000
|
Intel(R) PRO/1000 Gigabit Ethernet driver |
CONFIG_ETH_E1000_PTP_CLOCK
|
Enable PTP clock driver support [EXPERIMENTAL] |
CONFIG_ETH_E1000_PTP_CLOCK_SRC_HZ
|
Frequency of the clock source for the PTP timer |
CONFIG_ETH_E1000_VERBOSE_DEBUG
|
Enable hexdump of the received and sent frames |
CONFIG_ETH_ENC28J60
|
ENC28J60C Ethernet Controller |
CONFIG_ETH_ENC28J60_0
|
ENC28J60C Ethernet port 0 |
CONFIG_ETH_ENC28J60_0_FULL_DUPLEX
|
ENC28J60 full duplex |
CONFIG_ETH_ENC28J60_RX_THREAD_PRIO
|
Priority for internal incoming packet handler |
CONFIG_ETH_ENC28J60_RX_THREAD_STACK_SIZE
|
Stack size for internal incoming packet handler |
CONFIG_ETH_ENC28J60_TIMEOUT
|
IP buffer timeout |
CONFIG_ETH_ENC424J600
|
ENC424J600C Ethernet Controller |
CONFIG_ETH_ENC424J600_RX_THREAD_PRIO
|
Priority for internal incoming packet handler |
CONFIG_ETH_ENC424J600_RX_THREAD_STACK_SIZE
|
Stack size for internal incoming packet handler |
CONFIG_ETH_ENC424J600_TIMEOUT
|
IP buffer timeout |
CONFIG_ETH_GECKO
|
SiLabs Gecko Ethernet driver |
CONFIG_ETH_GECKO_CARRIER_CHECK_RX_IDLE_TIMEOUT_MS
|
Carrier check timeout period (ms) |
CONFIG_ETH_GECKO_RX_THREAD_PRIO
|
RX thread priority |
CONFIG_ETH_GECKO_RX_THREAD_STACK_SIZE
|
RX thread stack size |
CONFIG_ETH_INIT_PRIORITY
|
Ethernet driver init priority |
CONFIG_ETH_LITEETH
|
LiteEth Ethernet core driver |
CONFIG_ETH_LITEETH_0
|
LiteEth Ethernet port 0 |
CONFIG_ETH_MCUX
|
MCUX Ethernet driver |
CONFIG_ETH_MCUX_HW_ACCELERATION
|
Enable hardware acceleration |
CONFIG_ETH_MCUX_NO_PHY_SMI
|
Do not use SMI for PHY communication |
CONFIG_ETH_MCUX_PHY_EXTRA_DEBUG
|
Enable additional detailed PHY debug |
CONFIG_ETH_MCUX_PHY_TICK_MS
|
PHY poll period (ms) |
CONFIG_ETH_MCUX_PROMISCUOUS_MODE
|
Enable promiscuous mode |
CONFIG_ETH_MCUX_PTP_CLOCK_SRC_HZ
|
Frequency of the clock source for the PTP timer |
CONFIG_ETH_MCUX_RMII_EXT_CLK
|
Enable RMII clock from external sources |
CONFIG_ETH_MCUX_RX_BUFFERS
|
Number of MCUX RX buffers |
CONFIG_ETH_MCUX_TX_BUFFERS
|
Number of MCUX TX buffers |
CONFIG_ETH_NATIVE_POSIX
|
Native Posix Ethernet driver |
CONFIG_ETH_NATIVE_POSIX_DEV_NAME
|
Host ethernet TUN/TAP device name |
CONFIG_ETH_NATIVE_POSIX_DRV_NAME
|
Ethernet driver name |
CONFIG_ETH_NATIVE_POSIX_INTERFACE_COUNT
|
Number of network interfaces created |
CONFIG_ETH_NATIVE_POSIX_MAC_ADDR
|
MAC address for the interface |
CONFIG_ETH_NATIVE_POSIX_PTP_CLOCK
|
PTP clock driver support |
CONFIG_ETH_NATIVE_POSIX_RANDOM_MAC
|
Random MAC address |
CONFIG_ETH_NATIVE_POSIX_SETUP_SCRIPT
|
Host setup script |
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC
|
Start network interface automatically |
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT
|
Host startup script |
CONFIG_ETH_NATIVE_POSIX_STARTUP_SCRIPT_USER
|
Username to run the host startup script |
CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP
|
Strip VLAN tag from Rx frames |
CONFIG_ETH_NIC_MODEL
|
|
CONFIG_ETH_QEMU_EXTRA_ARGS
|
Extra arguments to QEMU -nic option |
CONFIG_ETH_QEMU_IFACE_NAME
|
Network interface name for QEMU |
CONFIG_ETH_RTT_LOG_LEVEL
|
|
CONFIG_ETH_RTT_LOG_LEVEL_DBG
|
Debug |
CONFIG_ETH_RTT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_ETH_RTT_LOG_LEVEL_ERR
|
Error |
CONFIG_ETH_RTT_LOG_LEVEL_INF
|
Info |
CONFIG_ETH_RTT_LOG_LEVEL_OFF
|
Off |
CONFIG_ETH_RTT_LOG_LEVEL_WRN
|
Warning |
CONFIG_ETH_SAM_GMAC
|
Atmel SAM Ethernet driver |
CONFIG_ETH_SAM_GMAC_BUF_RX_COUNT
|
Network RX buffers preallocated by the SAM ETH driver |
CONFIG_ETH_SAM_GMAC_FORCED_QUEUE
|
Queue to force the packets to |
CONFIG_ETH_SAM_GMAC_FORCE_QUEUE
|
Force all traffic to be routed through a specific queue |
CONFIG_ETH_SAM_GMAC_MAC_I2C_DEV_NAME
|
I2C bus driver device name |
CONFIG_ETH_SAM_GMAC_MAC_I2C_EEPROM
|
Read from an I2C EEPROM |
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS
|
I2C EEPROM internal address |
CONFIG_ETH_SAM_GMAC_MAC_I2C_INT_ADDRESS_SIZE
|
I2C EEPROM internal address size |
CONFIG_ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS
|
I2C 7-bit EEPROM chip address |
CONFIG_ETH_SAM_GMAC_MONITOR_PERIOD
|
Monitor task execution period |
CONFIG_ETH_SAM_GMAC_PHY_ADDR
|
GMAC PHY Address |
CONFIG_ETH_SAM_GMAC_QUEUES
|
Number of active hardware TX and RX queues |
CONFIG_ETH_SMSC911X
|
SMSC911x/9220 Ethernet driver |
CONFIG_ETH_STELLARIS
|
Enable TI Stellaris MCU family ethernet driver. |
CONFIG_ETH_STM32_AUTO_NEGOTIATION_ENABLE
|
Enable autonegotiation mode |
CONFIG_ETH_STM32_CARRIER_CHECK_RX_IDLE_TIMEOUT_MS
|
Carrier check timeout period (ms) |
CONFIG_ETH_STM32_HAL
|
STM32 HAL Ethernet driver |
CONFIG_ETH_STM32_HAL_MAC3
|
MAC Address Byte 3 |
CONFIG_ETH_STM32_HAL_MAC4
|
MAC Address Byte 4 |
CONFIG_ETH_STM32_HAL_MAC5
|
MAC Address Byte 5 |
CONFIG_ETH_STM32_HAL_MII
|
Use MII interface |
CONFIG_ETH_STM32_HAL_PHY_ADDRESS
|
Phy address |
CONFIG_ETH_STM32_HAL_RANDOM_MAC
|
Random MAC address |
CONFIG_ETH_STM32_HAL_RX_THREAD_PRIO
|
RX thread priority |
CONFIG_ETH_STM32_HAL_RX_THREAD_STACK_SIZE
|
RX thread stack size |
CONFIG_ETH_STM32_HAL_USE_DTCM_FOR_DMA_BUFFER
|
Use DTCM for DMA buffers |
CONFIG_ETH_STM32_MODE_HALFDUPLEX
|
Enable this if using half duplex |
CONFIG_ETH_STM32_SPEED_10M
|
Enable this if using 10 Mbps for speed when autonegotiation is diabled |
CONFIG_ETH_W5500
|
W5500 Ethernet Controller |
CONFIG_ETH_W5500_RX_THREAD_PRIO
|
Priority for internal incoming packet handler |
CONFIG_ETH_W5500_RX_THREAD_STACK_SIZE
|
Stack size for internal incoming packet handler |
CONFIG_ETH_W5500_TIMEOUT
|
IP buffer timeout |
CONFIG_ETH_XLNX_GEM
|
Xilinx GEM Ethernet driver |
CONFIG_EVENTFD
|
Enable support for eventfd |
CONFIG_EVENTFD_MAX
|
Maximum number of eventfd’s |
CONFIG_EVENT_MANAGER_LOG_LEVEL
|
|
CONFIG_EVENT_MANAGER_LOG_LEVEL_DBG
|
Debug |
CONFIG_EVENT_MANAGER_LOG_LEVEL_ERR
|
Error |
CONFIG_EVENT_MANAGER_LOG_LEVEL_INF
|
Info |
CONFIG_EVENT_MANAGER_LOG_LEVEL_OFF
|
Off |
CONFIG_EVENT_MANAGER_LOG_LEVEL_WRN
|
Warning |
CONFIG_EVICTION_CUSTOM
|
Custom eviction algorithm |
CONFIG_EVICTION_NRU
|
Not Recently Used (NRU) page eviction algorithm |
CONFIG_EVICTION_NRU_PERIOD
|
Recently accessed period, in milliseconds |
CONFIG_EXCEPTIONS
|
Enable C++ exceptions support |
CONFIG_EXCEPTION_DEBUG
|
Unhandled exception debugging information |
CONFIG_EXCEPTION_STACK_TRACE
|
Attempt to print stack traces upon exceptions |
CONFIG_EXECUTE_XOR_WRITE
|
Enable W^X for memory partitions |
CONFIG_EXTERNAL_LIBC
|
External C library |
CONFIG_EXTI_STM32
|
External Interrupt/Event Controller (EXTI) Driver for STM32 family of MCUs |
CONFIG_EXTI_STM32_EXTI0_IRQ_PRI
|
EXTI0 IRQ priority |
CONFIG_EXTI_STM32_EXTI10_IRQ_PRI
|
EXTI10 IRQ priority |
CONFIG_EXTI_STM32_EXTI11_IRQ_PRI
|
EXTI11 IRQ priority |
CONFIG_EXTI_STM32_EXTI12_IRQ_PRI
|
EXTI12 IRQ priority |
CONFIG_EXTI_STM32_EXTI13_IRQ_PRI
|
EXTI13 IRQ priority |
CONFIG_EXTI_STM32_EXTI14_IRQ_PRI
|
EXTI14 IRQ priority |
CONFIG_EXTI_STM32_EXTI15_10_IRQ_PRI
|
EXTI15:10 IRQ priority |
CONFIG_EXTI_STM32_EXTI15_4_IRQ_PRI
|
EXTI15:4 IRQ priority |
CONFIG_EXTI_STM32_EXTI15_IRQ_PRI
|
EXTI15 IRQ priority |
CONFIG_EXTI_STM32_EXTI1_0_IRQ_PRI
|
EXTI1:0 IRQ priority |
CONFIG_EXTI_STM32_EXTI1_IRQ_PRI
|
EXTI1 IRQ priority |
CONFIG_EXTI_STM32_EXTI2_IRQ_PRI
|
EXTI2 IRQ priority |
CONFIG_EXTI_STM32_EXTI3_2_IRQ_PRI
|
EXTI3:2 IRQ priority |
CONFIG_EXTI_STM32_EXTI3_IRQ_PRI
|
EXTI3 IRQ priority |
CONFIG_EXTI_STM32_EXTI4_IRQ_PRI
|
EXTI4 IRQ priority |
CONFIG_EXTI_STM32_EXTI5_IRQ_PRI
|
EXTI5 IRQ priority |
CONFIG_EXTI_STM32_EXTI6_IRQ_PRI
|
EXTI6 IRQ priority |
CONFIG_EXTI_STM32_EXTI7_IRQ_PRI
|
EXTI7 IRQ priority |
CONFIG_EXTI_STM32_EXTI8_IRQ_PRI
|
EXTI8 IRQ priority |
CONFIG_EXTI_STM32_EXTI9_5_IRQ_PRI
|
EXTI9:5 IRQ priority |
CONFIG_EXTI_STM32_EXTI9_IRQ_PRI
|
EXTI9 IRQ priority |
CONFIG_EXTI_STM32_LPTIM1_IRQ_PRI
|
LPTIM1 IRQ priority |
CONFIG_EXTI_STM32_OTG_FS_WKUP_IRQ_PRI
|
USB OTG FS Wake Up IRQ priority |
CONFIG_EXTI_STM32_PVD_IRQ_PRI
|
RVD Through IRQ priority |
CONFIG_EXTI_STM32_RTC_WKUP_IRQ_PRI
|
RTC Wake Up IRQ priority |
CONFIG_EXTI_STM32_TAMP_STAMP_IRQ_PRI
|
Tamper and Timestamp IRQ priority |
CONFIG_EXTRA_EXCEPTION_INFO
|
Extra exception debug information |
CONFIG_FAKE_ENTROPY_NATIVE_POSIX
|
Native posix entropy driver |
CONFIG_FATAL_ERROR_LOG_LEVEL
|
|
CONFIG_FATAL_ERROR_LOG_LEVEL_DBG
|
Debug |
CONFIG_FATAL_ERROR_LOG_LEVEL_ERR
|
Error |
CONFIG_FATAL_ERROR_LOG_LEVEL_INF
|
Info |
CONFIG_FATAL_ERROR_LOG_LEVEL_OFF
|
Off |
CONFIG_FATAL_ERROR_LOG_LEVEL_WRN
|
Warning |
CONFIG_FAT_FILESYSTEM_ELM
|
ELM FAT file system support |
CONFIG_FAULT_DUMP
|
Fault dump level |
CONFIG_FCB
|
Flash Circular Buffer support |
CONFIG_FDC2X1X
|
FDC2X1X Capacitance-to-Digital Converter |
CONFIG_FDC2X1X_THREAD_PRIORITY
|
Thread priority |
CONFIG_FDC2X1X_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_FDC2X1X_TRIGGER
|
|
CONFIG_FDC2X1X_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_FDC2X1X_TRIGGER_NONE
|
No trigger |
CONFIG_FDC2X1X_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_FILE_SYSTEM
|
File system support |
CONFIG_FILE_SYSTEM_LITTLEFS
|
LittleFS support |
CONFIG_FILE_SYSTEM_MAX_FILE_NAME
|
Optional override for maximum file name length |
CONFIG_FILE_SYSTEM_MAX_TYPES
|
Maximum number of distinct file system types allowed |
CONFIG_FILE_SYSTEM_SHELL
|
Enable file system shell |
CONFIG_FLASH
|
Flash Drivers |
CONFIG_FLASHDISK_LOG_LEVEL
|
|
CONFIG_FLASHDISK_LOG_LEVEL_DBG
|
Debug |
CONFIG_FLASHDISK_LOG_LEVEL_ERR
|
Error |
CONFIG_FLASHDISK_LOG_LEVEL_INF
|
Info |
CONFIG_FLASHDISK_LOG_LEVEL_OFF
|
Off |
CONFIG_FLASHDISK_LOG_LEVEL_WRN
|
Warning |
CONFIG_FLASH_AREA_CHECK_INTEGRITY
|
Enable flash check functions |
CONFIG_FLASH_BASE_ADDRESS
|
Flash Base Address |
CONFIG_FLASH_CONFIG_OFFSET
|
Flash config data offset |
CONFIG_FLASH_HAS_DRIVER_ENABLED
|
|
CONFIG_FLASH_HAS_PAGE_LAYOUT
|
|
CONFIG_FLASH_JESD216
|
|
CONFIG_FLASH_JESD216_API
|
Provide API to read JESD216 flash parameters |
CONFIG_FLASH_LOAD_OFFSET
|
Kernel load offset |
CONFIG_FLASH_LOAD_SIZE
|
Kernel load size |
CONFIG_FLASH_LOG_LEVEL
|
|
CONFIG_FLASH_LOG_LEVEL_DBG
|
Debug |
CONFIG_FLASH_LOG_LEVEL_ERR
|
Error |
CONFIG_FLASH_LOG_LEVEL_INF
|
Info |
CONFIG_FLASH_LOG_LEVEL_OFF
|
Off |
CONFIG_FLASH_LOG_LEVEL_WRN
|
Warning |
CONFIG_FLASH_MAP
|
Flash map abstraction module |
CONFIG_FLASH_MAP_CUSTOM
|
Custom flash map description |
CONFIG_FLASH_MAP_SHELL
|
Enable flash map shell interface |
CONFIG_FLASH_MCUX_FLEXSPI_MX25UM51345G
|
MCUX FlexSPI MX25UM51345G driver |
CONFIG_FLASH_MCUX_FLEXSPI_NOR
|
MCUX FlexSPI NOR driver |
CONFIG_FLASH_MCUX_FLEXSPI_NOR_WRITE_BUFFER
|
MCUX FlexSPI NOR write RAM buffer |
CONFIG_FLASH_MCUX_FLEXSPI_XIP
|
MCUX FlexSPI flash access with xip |
CONFIG_FLASH_MCUX_FLEXSPI_XIP_MEM
|
|
CONFIG_FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
|
ITCM |
CONFIG_FLASH_MCUX_FLEXSPI_XIP_MEM_SRAM
|
SRAM |
CONFIG_FLASH_NRF_FORCE_ALT
|
|
CONFIG_FLASH_PAGE_LAYOUT
|
API for retrieving the layout of pages |
CONFIG_FLASH_SHELL
|
Enable Flash shell |
CONFIG_FLASH_SIMULATOR
|
Flash simulator |
CONFIG_FLASH_SIMULATOR_DOUBLE_WRITES
|
Allow program units to be programmed more than once |
CONFIG_FLASH_SIMULATOR_MIN_ERASE_TIME_US
|
Minimum erase time (µS) |
CONFIG_FLASH_SIMULATOR_MIN_READ_TIME_US
|
Minimum read time (µS) |
CONFIG_FLASH_SIMULATOR_MIN_WRITE_TIME_US
|
Minimum write time (µS) |
CONFIG_FLASH_SIMULATOR_SIMULATE_TIMING
|
Enable hardware timing simulation |
CONFIG_FLASH_SIMULATOR_STATS
|
flash operations statistic |
CONFIG_FLASH_SIMULATOR_STAT_PAGE_COUNT
|
Pages under statistic |
CONFIG_FLASH_SIMULATOR_UNALIGNED_READ
|
Allow read access to be unaligned |
CONFIG_FLASH_SIZE
|
Flash Size in kB |
CONFIG_FLASH_STM32_QSPI
|
STM32 Quad SPI Flash driver |
CONFIG_FLEXSPI_CONFIG_BLOCK_OFFSET
|
FlexSPI config block offset |
CONFIG_FLOAT_HARD
|
Enable hard-float calling convention |
CONFIG_FMFU_FDEV_LOG_LEVEL
|
|
CONFIG_FMFU_FDEV_LOG_LEVEL_DBG
|
Debug |
CONFIG_FMFU_FDEV_LOG_LEVEL_ERR
|
Error |
CONFIG_FMFU_FDEV_LOG_LEVEL_INF
|
Info |
CONFIG_FMFU_FDEV_LOG_LEVEL_OFF
|
Off |
CONFIG_FMFU_FDEV_LOG_LEVEL_WRN
|
Warning |
CONFIG_FNMATCH
|
Fnmatch Support |
CONFIG_FORCE_NO_ASSERT
|
Force-disable no assertions |
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL
|
|
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL_DBG
|
Debug |
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL_ERR
|
Error |
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL_INF
|
Info |
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL_OFF
|
Off |
CONFIG_FOTA_DOWNLOAD_LOG_LEVEL_WRN
|
Warning |
CONFIG_FPU
|
Enable floating point unit (FPU) |
CONFIG_FPU_SHARING
|
FPU register sharing |
CONFIG_FP_FPU_DA
|
|
CONFIG_FP_HARDABI
|
Floating point Hard ABI |
CONFIG_FP_SOFTABI
|
Floating point Soft ABI |
CONFIG_FRAMEBUF_DISPLAY
|
|
CONFIG_FS_FATFS_CODEPAGE
|
FatFS code page (character set) |
CONFIG_FS_FATFS_EXFAT
|
Enable exFAT support |
CONFIG_FS_FATFS_LFN
|
Enable long filenames (LFN) |
CONFIG_FS_FATFS_LFN_MODE_BSS
|
Static buffer |
CONFIG_FS_FATFS_LFN_MODE_HEAP
|
Heap buffer |
CONFIG_FS_FATFS_LFN_MODE_STACK
|
Stack buffer |
CONFIG_FS_FATFS_MAX_LFN
|
Max filename length |
CONFIG_FS_FATFS_MAX_SS
|
Maximum supported sector size |
CONFIG_FS_FATFS_MKFS
|
|
CONFIG_FS_FATFS_MOUNT_MKFS
|
Allow formatting volume when mounting fails |
CONFIG_FS_FATFS_NUM_DIRS
|
Maximum number of opened directories |
CONFIG_FS_FATFS_NUM_FILES
|
Maximum number of opened files |
CONFIG_FS_FATFS_READ_ONLY
|
Read-only support for all volumes |
CONFIG_FS_LITTLEFS_BLOCK_CYCLES
|
Number of erase cycles before moving data to another block |
CONFIG_FS_LITTLEFS_CACHE_SIZE
|
Size of block caches in bytes |
CONFIG_FS_LITTLEFS_FC_HEAP_SIZE
|
Enable flexible file cache sizes for littlefs |
CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE
|
Size of lookahead buffer in bytes |
CONFIG_FS_LITTLEFS_NUM_DIRS
|
Maximum number of opened directories |
CONFIG_FS_LITTLEFS_NUM_FILES
|
Maximum number of opened files |
CONFIG_FS_LITTLEFS_PROG_SIZE
|
Minimum size of a block program |
CONFIG_FS_LITTLEFS_READ_SIZE
|
Minimum size of a block read |
CONFIG_FS_LOG_LEVEL
|
|
CONFIG_FS_LOG_LEVEL_DBG
|
Debug |
CONFIG_FS_LOG_LEVEL_ERR
|
Error |
CONFIG_FS_LOG_LEVEL_INF
|
Info |
CONFIG_FS_LOG_LEVEL_OFF
|
Off |
CONFIG_FS_LOG_LEVEL_WRN
|
Warning |
CONFIG_FS_MGMT_DL_CHUNK_SIZE
|
Maximum chunk size for file downloads |
CONFIG_FS_MGMT_DL_CHUNK_SIZE_LIMIT
|
Enable setting custom size of download file chunk |
CONFIG_FS_MGMT_MAX_FILE_SIZE_4GB
|
<= 4GB |
CONFIG_FS_MGMT_MAX_FILE_SIZE_64KB
|
<= 64KB |
CONFIG_FS_MGMT_MAX_OFFSET_LEN
|
|
CONFIG_FS_MGMT_PATH_SIZE
|
Maximum file path length |
CONFIG_FS_MGMT_UL_CHUNK_SIZE
|
Maximum chunk size for file uploads |
CONFIG_FT800
|
FT800 Embedded Video Engine driver |
CONFIG_FTP_CLIENT_LOG_LEVEL
|
|
CONFIG_FTP_CLIENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_FTP_CLIENT_LOG_LEVEL_ERR
|
Error |
CONFIG_FTP_CLIENT_LOG_LEVEL_INF
|
Info |
CONFIG_FTP_CLIENT_LOG_LEVEL_OFF
|
Off |
CONFIG_FTP_CLIENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_FUSE_FS_ACCESS
|
Enable FUSE based access to file system partitions |
CONFIG_FXAS21002
|
FXAS21002 gyroscope driver |
CONFIG_FXAS21002_DR
|
Output data rate |
CONFIG_FXAS21002_DRDY_INT1
|
Data ready interrupt to INT1 pin |
CONFIG_FXAS21002_RANGE
|
Full scale range |
CONFIG_FXAS21002_THREAD_PRIORITY
|
Own thread priority |
CONFIG_FXAS21002_THREAD_STACK_SIZE
|
Own thread stack size |
CONFIG_FXAS21002_TRIGGER
|
|
CONFIG_FXAS21002_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_FXAS21002_TRIGGER_NONE
|
No trigger |
CONFIG_FXAS21002_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_FXAS21002_WHOAMI
|
WHOAMI value |
CONFIG_FXOS8700
|
FXOS8700 accelerometer/magnetometer driver |
CONFIG_FXOS8700_DRDY_INT1
|
Data ready interrupt to INT1 pin |
CONFIG_FXOS8700_MAG_VECM
|
Magnetic vector-magnitude detection |
CONFIG_FXOS8700_MAG_VECM_INT1
|
Magnetic vector-magnitude interrupt to INT1 pin |
CONFIG_FXOS8700_MODE_ACCEL
|
Accelerometer-only mode |
CONFIG_FXOS8700_MODE_HYBRID
|
Hybrid (accel+mag) mode |
CONFIG_FXOS8700_MODE_MAGN
|
Magnetometer-only mode |
CONFIG_FXOS8700_MOTION
|
Motion detection |
CONFIG_FXOS8700_MOTION_INT1
|
Motion interrupt to INT1 pin |
CONFIG_FXOS8700_PULSE
|
Pulse detection |
CONFIG_FXOS8700_PULSE_INT1
|
Pulse interrupt to INT1 pin |
CONFIG_FXOS8700_TEMP
|
Enable temperature |
CONFIG_FXOS8700_THREAD_PRIORITY
|
Own thread priority |
CONFIG_FXOS8700_THREAD_STACK_SIZE
|
Own thread stack size |
CONFIG_FXOS8700_TRIGGER
|
|
CONFIG_FXOS8700_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_FXOS8700_TRIGGER_NONE
|
No trigger |
CONFIG_FXOS8700_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_GD7965
|
GD7965 compatible display controller driver |
CONFIG_GDBSTUB
|
GDB remote serial protocol support [EXPERIMENTAL] |
CONFIG_GDBSTUB_SERIAL_BACKEND
|
Use serial backend |
CONFIG_GDBSTUB_SERIAL_BACKEND_NAME
|
Serial Name |
CONFIG_GDT_DYNAMIC
|
Store GDT in RAM so that it can be modified |
CONFIG_GEN_IRQ_START_VECTOR
|
|
CONFIG_GEN_IRQ_VECTOR_TABLE
|
Generate an interrupt vector table |
CONFIG_GEN_ISR_TABLES
|
Use generated IRQ tables |
CONFIG_GEN_PRIV_STACKS
|
|
CONFIG_GEN_SW_ISR_TABLE
|
Generate a software ISR table |
CONFIG_GETOPT
|
GetOpt Support |
CONFIG_GIC
|
|
CONFIG_GIC_SINGLE_SECURITY_STATE
|
|
CONFIG_GIC_V1
|
|
CONFIG_GIC_V2
|
|
CONFIG_GIC_V3
|
|
CONFIG_GIC_VER
|
|
CONFIG_GPIO
|
GPIO Drivers |
CONFIG_GPIO_AS_PINRESET
|
GPIO as pin reset (reset button) |
CONFIG_GPIO_CC13XX_CC26XX
|
TI SimpleLink CC13xx / CC26xx GPIO driver |
CONFIG_GPIO_CC32XX
|
TI CC32XX GPIO driver |
CONFIG_GPIO_CMSDK_AHB
|
ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers |
CONFIG_GPIO_CY8C95XX
|
CY8C95XX I2C GPIO chip |
CONFIG_GPIO_CY8C95XX_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_DW
|
Designware GPIO |
CONFIG_GPIO_DW_0
|
Designware GPIO block 0 |
CONFIG_GPIO_DW_0_CLOCK_GATE_SUBSYS
|
Clock controller’s subsystem |
CONFIG_GPIO_DW_0_IRQ_DIRECT
|
Direct Hardware Interrupt |
CONFIG_GPIO_DW_0_IRQ_SHARED
|
Shared IRQ |
CONFIG_GPIO_DW_1
|
Designware GPIO block 1 |
CONFIG_GPIO_DW_1_CLOCK_GATE_SUBSYS
|
Clock controller’s subsystem |
CONFIG_GPIO_DW_1_IRQ_DIRECT
|
Direct Hardware Interrupt |
CONFIG_GPIO_DW_1_IRQ_SHARED
|
Shared IRQ |
CONFIG_GPIO_DW_2
|
Designware GPIO block 1 |
CONFIG_GPIO_DW_2_CLOCK_GATE_SUBSYS
|
Clock controller’s subsystem |
CONFIG_GPIO_DW_2_IRQ_DIRECT
|
Direct Hardware Interrupt |
CONFIG_GPIO_DW_2_IRQ_SHARED
|
Shared IRQ |
CONFIG_GPIO_DW_3
|
Designware GPIO block 1 |
CONFIG_GPIO_DW_3_CLOCK_GATE_SUBSYS
|
Clock controller’s subsystem |
CONFIG_GPIO_DW_3_IRQ_DIRECT
|
Direct Hardware Interrupt |
CONFIG_GPIO_DW_3_IRQ_SHARED
|
Shared IRQ |
CONFIG_GPIO_DW_CLOCK_GATE
|
Enable clock gating |
CONFIG_GPIO_DW_CLOCK_GATE_DRV_NAME
|
|
CONFIG_GPIO_DW_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_DW_SHARED_IRQ
|
|
CONFIG_GPIO_EMUL
|
[EXPERIMENTAL] Emulated GPIO driver |
CONFIG_GPIO_EOS_S3
|
EOS_S3 GPIO driver |
CONFIG_GPIO_ESP32
|
ESP32 GPIO |
CONFIG_GPIO_ESP32_0
|
ESP32 GPIO (pins 0-31) |
CONFIG_GPIO_ESP32_1
|
ESP32 GPIO (pins 32-39) |
CONFIG_GPIO_GECKO
|
Gecko GPIO driver |
CONFIG_GPIO_GECKO_COMMON_INIT_PRIORITY
|
Common initialization priority |
CONFIG_GPIO_IMX
|
IMX GPIO driver |
CONFIG_GPIO_INTEL
|
Intel Soc GPIO |
CONFIG_GPIO_INTEL_CHECK_PERMS
|
Check permissions before manipulating GPIO |
CONFIG_GPIO_ITE_IT8XXX2
|
ITE IT8XXX2 GPIO driver |
CONFIG_GPIO_LITEX
|
Litex GPIO driver |
CONFIG_GPIO_LMP90XXX
|
LMP90xxx GPIO driver |
CONFIG_GPIO_LMP90XXX_INIT_PRIORITY
|
Driver init priority |
CONFIG_GPIO_LOG_LEVEL
|
|
CONFIG_GPIO_LOG_LEVEL_DBG
|
Debug |
CONFIG_GPIO_LOG_LEVEL_ERR
|
Error |
CONFIG_GPIO_LOG_LEVEL_INF
|
Info |
CONFIG_GPIO_LOG_LEVEL_OFF
|
Off |
CONFIG_GPIO_LOG_LEVEL_WRN
|
Warning |
CONFIG_GPIO_LPC11U6X
|
LPC11U6x GPIO driver |
CONFIG_GPIO_MCP23S17
|
MCP23S17 SPI-based GPIO chip |
CONFIG_GPIO_MCP23S17_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_MCUX
|
MCUX GPIO driver |
CONFIG_GPIO_MCUX_IGPIO
|
MCUX IGPIO driver |
CONFIG_GPIO_MCUX_LPC
|
MCUX LPC GPIO driver |
CONFIG_GPIO_MMIO32
|
|
CONFIG_GPIO_NPCX
|
Nuvoton NPCX embedded controller (EC) gpio driver |
CONFIG_GPIO_NRFX
|
nRF GPIO driver |
CONFIG_GPIO_NRF_INIT_PRIORITY
|
nRF GPIO initialization priority |
CONFIG_GPIO_NRF_INT_EDGE_USING_GPIOTE
|
Edge interrupts using GPIOTE |
CONFIG_GPIO_NRF_INT_EDGE_USING_SENSE
|
Edge interrupts using SENSE |
CONFIG_GPIO_NRF_P0
|
nRF GPIO Port P0 |
CONFIG_GPIO_NRF_P1
|
nRF GPIO Port P1 |
CONFIG_GPIO_PCA95XX
|
PCA95XX I2C-based GPIO chip |
CONFIG_GPIO_PCA95XX_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_PCA95XX_INTERRUPT
|
Interrupt enable |
CONFIG_GPIO_PCAL6408A
|
PCAL6408A I2C GPIO chip |
CONFIG_GPIO_PCAL6408A_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_PSOC6
|
Cypress PSoC-6 GPIO driver |
CONFIG_GPIO_RCAR
|
Renesas RCAR GPIO |
CONFIG_GPIO_RV32M1
|
RV32M1 GPIO driver |
CONFIG_GPIO_SAM
|
Atmel SAM GPIO (PORT) driver |
CONFIG_GPIO_SAM0
|
Atmel SAM0 GPIO (PORT) driver |
CONFIG_GPIO_SAM4L
|
Atmel SAM4L GPIO (PORT) driver |
CONFIG_GPIO_SHELL
|
Enable GPIO Shell |
CONFIG_GPIO_SIFIVE
|
SiFive Freedom Processor GPIO driver |
CONFIG_GPIO_SNPS_CREG
|
SNPS CREG GPIO |
CONFIG_GPIO_SNPS_CREG_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_STELLARIS
|
TI Stellaris GPIO Driver |
CONFIG_GPIO_STM32
|
GPIO Driver for STM32 family of MCUs |
CONFIG_GPIO_STM32_SWJ_DISABLE
|
JTAG-DP Disabled and SW-DP Disabled |
CONFIG_GPIO_STM32_SWJ_ENABLE
|
Full SWJ (JTAG-DP + SW-DP): Reset State |
CONFIG_GPIO_STM32_SWJ_NOJTAG
|
JTAG-DP Disabled and SW-DP Enabled |
CONFIG_GPIO_STM32_SWJ_NONJTRST
|
Full SWJ (JTAG-DP + SW-DP) but without NJTRST |
CONFIG_GPIO_STMPE1600
|
STMPE1600 I2C-based GPIO chip |
CONFIG_GPIO_STMPE1600_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_SX1509B
|
SX1509B I2C GPIO chip |
CONFIG_GPIO_SX1509B_DEBOUNCE_TIME
|
Debounce time interval |
CONFIG_GPIO_SX1509B_INIT_PRIORITY
|
Init priority |
CONFIG_GPIO_SX1509B_INTERRUPT
|
Interrupt enable |
CONFIG_GPIO_TELINK_B91
|
Telink B91 GPIO driver |
CONFIG_GPIO_XEC
|
XEC Microchip GPIO driver |
CONFIG_GPIO_XLNX_AXI
|
Xilinx AXI GPIO driver |
CONFIG_GPS_SIM_LOG_LEVEL
|
|
CONFIG_GPS_SIM_LOG_LEVEL_DBG
|
Debug |
CONFIG_GPS_SIM_LOG_LEVEL_ERR
|
Error |
CONFIG_GPS_SIM_LOG_LEVEL_INF
|
Info |
CONFIG_GPS_SIM_LOG_LEVEL_OFF
|
Off |
CONFIG_GPS_SIM_LOG_LEVEL_WRN
|
Warning |
CONFIG_GP_ALL_DATA
|
All data global pointer references |
CONFIG_GP_GLOBAL
|
Global data global pointer references |
CONFIG_GP_LOCAL
|
Local data global pointer references |
CONFIG_GP_NONE
|
No global pointer |
CONFIG_GROVE_LCD_RGB
|
Enable the Seeed Grove LCD RGB Backlight |
CONFIG_GROVE_LCD_RGB_I2C_MASTER_DEV_NAME
|
I2C Master where Grove LCD is connected |
CONFIG_GROVE_LIGHT_SENSOR
|
Enable the Seeed Grove Light Sensor |
CONFIG_GROVE_TEMPERATURE_SENSOR
|
Enable the Seeed Grove Temperature Sensor |
CONFIG_GSM_MUX
|
Enable GSM 07.10 muxing protocol |
CONFIG_GSM_MUX_DLCI_AT
|
DLCI id of the AT commands channel |
CONFIG_GSM_MUX_DLCI_MAX
|
Max number of GSM data link connection (DLC) instances |
CONFIG_GSM_MUX_DLCI_PPP
|
DLCI id of the PPP connection channel |
CONFIG_GSM_MUX_INITIATOR
|
Are we the initiator of the connection |
CONFIG_GSM_MUX_LOG_LEVEL
|
|
CONFIG_GSM_MUX_LOG_LEVEL_DBG
|
Debug |
CONFIG_GSM_MUX_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_GSM_MUX_LOG_LEVEL_ERR
|
Error |
CONFIG_GSM_MUX_LOG_LEVEL_INF
|
Info |
CONFIG_GSM_MUX_LOG_LEVEL_OFF
|
Off |
CONFIG_GSM_MUX_LOG_LEVEL_WRN
|
Warning |
CONFIG_GSM_MUX_MAX
|
Max number of GSM mux instances |
CONFIG_GSM_MUX_MRU_DEFAULT_LEN
|
Default size of received user data (MRU) |
CONFIG_GSM_MUX_MRU_MAX_LEN
|
Max size of received user data (MRU) |
CONFIG_GSM_MUX_PENDING_CMD_MAX
|
Max number of pending GSM mux commands |
CONFIG_GSM_MUX_T1_TIMEOUT
|
T1 timeout in ms |
CONFIG_GSM_MUX_VERBOSE_DEBUG
|
Print hexdump of sent and received packets |
CONFIG_GSM_PPP_AUTOSTART
|
Auto-start PPP at boot |
CONFIG_HARDWARE_DEVICE_CS_GENERATOR
|
Use hardware random driver for CS random numbers |
CONFIG_HARVARD
|
Harvard Architecture |
CONFIG_HAS_ALTERA_HAL
|
Altera HAL drivers support |
CONFIG_HAS_ARCH_CACHE
|
Integrated cache controller |
CONFIG_HAS_ARM_DIV
|
Has the divider for ARM |
CONFIG_HAS_ARM_SMCCC
|
|
CONFIG_HAS_CC13X2_CC26X2_SDK
|
|
CONFIG_HAS_CC3220SDK
|
|
CONFIG_HAS_CMSIS_CORE
|
|
CONFIG_HAS_CMSIS_CORE_A
|
|
CONFIG_HAS_CMSIS_CORE_M
|
|
CONFIG_HAS_CMSIS_CORE_R
|
|
CONFIG_HAS_COVERAGE_SUPPORT
|
|
CONFIG_HAS_CYPRESS_DRIVERS
|
|
CONFIG_HAS_DIV_INSTRUCTION
|
|
CONFIG_HAS_DTS
|
|
CONFIG_HAS_DTS_GPIO
|
|
CONFIG_HAS_DTS_WDT
|
|
CONFIG_HAS_EXTERNAL_CACHE
|
External cache controller |
CONFIG_HAS_FLASH_LOAD_OFFSET
|
|
CONFIG_HAS_HW_NRF_ACL
|
|
CONFIG_HAS_HW_NRF_ADC
|
|
CONFIG_HAS_HW_NRF_BPROT
|
|
CONFIG_HAS_HW_NRF_CC310
|
|
CONFIG_HAS_HW_NRF_CC312
|
|
CONFIG_HAS_HW_NRF_CCM
|
|
CONFIG_HAS_HW_NRF_CCM_LFLEN_8BIT
|
|
CONFIG_HAS_HW_NRF_CLOCK
|
|
CONFIG_HAS_HW_NRF_COMP
|
|
CONFIG_HAS_HW_NRF_DPPIC
|
|
CONFIG_HAS_HW_NRF_ECB
|
|
CONFIG_HAS_HW_NRF_EGU0
|
|
CONFIG_HAS_HW_NRF_EGU1
|
|
CONFIG_HAS_HW_NRF_EGU2
|
|
CONFIG_HAS_HW_NRF_EGU3
|
|
CONFIG_HAS_HW_NRF_EGU4
|
|
CONFIG_HAS_HW_NRF_EGU5
|
|
CONFIG_HAS_HW_NRF_GPIO0
|
|
CONFIG_HAS_HW_NRF_GPIO1
|
|
CONFIG_HAS_HW_NRF_GPIOTE
|
|
CONFIG_HAS_HW_NRF_I2S
|
|
CONFIG_HAS_HW_NRF_IPC
|
|
CONFIG_HAS_HW_NRF_KMU
|
|
CONFIG_HAS_HW_NRF_LPCOMP
|
|
CONFIG_HAS_HW_NRF_MPU
|
|
CONFIG_HAS_HW_NRF_MWU
|
|
CONFIG_HAS_HW_NRF_NFCT
|
|
CONFIG_HAS_HW_NRF_NVMC_PE
|
|
CONFIG_HAS_HW_NRF_PDM
|
|
CONFIG_HAS_HW_NRF_POWER
|
|
CONFIG_HAS_HW_NRF_PPI
|
|
CONFIG_HAS_HW_NRF_PWM0
|
|
CONFIG_HAS_HW_NRF_PWM1
|
|
CONFIG_HAS_HW_NRF_PWM2
|
|
CONFIG_HAS_HW_NRF_PWM3
|
|
CONFIG_HAS_HW_NRF_QDEC
|
|
CONFIG_HAS_HW_NRF_QDEC0
|
|
CONFIG_HAS_HW_NRF_QDEC1
|
|
CONFIG_HAS_HW_NRF_QSPI
|
|
CONFIG_HAS_HW_NRF_RADIO_BLE_2M
|
|
CONFIG_HAS_HW_NRF_RADIO_BLE_CODED
|
|
CONFIG_HAS_HW_NRF_RADIO_BLE_DF
|
|
CONFIG_HAS_HW_NRF_RADIO_IEEE802154
|
|
CONFIG_HAS_HW_NRF_RADIO_TX_PWR_HIGH
|
|
CONFIG_HAS_HW_NRF_RNG
|
|
CONFIG_HAS_HW_NRF_RTC0
|
|
CONFIG_HAS_HW_NRF_RTC1
|
|
CONFIG_HAS_HW_NRF_RTC2
|
|
CONFIG_HAS_HW_NRF_SAADC
|
|
CONFIG_HAS_HW_NRF_SPI0
|
|
CONFIG_HAS_HW_NRF_SPI1
|
|
CONFIG_HAS_HW_NRF_SPI2
|
|
CONFIG_HAS_HW_NRF_SPIM0
|
|
CONFIG_HAS_HW_NRF_SPIM1
|
|
CONFIG_HAS_HW_NRF_SPIM2
|
|
CONFIG_HAS_HW_NRF_SPIM3
|
|
CONFIG_HAS_HW_NRF_SPIM4
|
|
CONFIG_HAS_HW_NRF_SPIS0
|
|
CONFIG_HAS_HW_NRF_SPIS1
|
|
CONFIG_HAS_HW_NRF_SPIS2
|
|
CONFIG_HAS_HW_NRF_SPIS3
|
|
CONFIG_HAS_HW_NRF_SPU
|
|
CONFIG_HAS_HW_NRF_SWI0
|
|
CONFIG_HAS_HW_NRF_SWI1
|
|
CONFIG_HAS_HW_NRF_SWI2
|
|
CONFIG_HAS_HW_NRF_SWI3
|
|
CONFIG_HAS_HW_NRF_SWI4
|
|
CONFIG_HAS_HW_NRF_SWI5
|
|
CONFIG_HAS_HW_NRF_TEMP
|
|
CONFIG_HAS_HW_NRF_TIMER0
|
|
CONFIG_HAS_HW_NRF_TIMER1
|
|
CONFIG_HAS_HW_NRF_TIMER2
|
|
CONFIG_HAS_HW_NRF_TIMER3
|
|
CONFIG_HAS_HW_NRF_TIMER4
|
|
CONFIG_HAS_HW_NRF_TWI0
|
|
CONFIG_HAS_HW_NRF_TWI1
|
|
CONFIG_HAS_HW_NRF_TWIM0
|
|
CONFIG_HAS_HW_NRF_TWIM1
|
|
CONFIG_HAS_HW_NRF_TWIM2
|
|
CONFIG_HAS_HW_NRF_TWIM3
|
|
CONFIG_HAS_HW_NRF_TWIS0
|
|
CONFIG_HAS_HW_NRF_TWIS1
|
|
CONFIG_HAS_HW_NRF_TWIS2
|
|
CONFIG_HAS_HW_NRF_TWIS3
|
|
CONFIG_HAS_HW_NRF_UART0
|
|
CONFIG_HAS_HW_NRF_UARTE0
|
|
CONFIG_HAS_HW_NRF_UARTE1
|
|
CONFIG_HAS_HW_NRF_UARTE2
|
|
CONFIG_HAS_HW_NRF_UARTE3
|
|
CONFIG_HAS_HW_NRF_USBD
|
|
CONFIG_HAS_HW_NRF_USBREG
|
|
CONFIG_HAS_HW_NRF_WDT
|
|
CONFIG_HAS_HW_NRF_WDT0
|
|
CONFIG_HAS_HW_NRF_WDT1
|
|
CONFIG_HAS_I2C_DW
|
|
CONFIG_HAS_IMX_EPIT
|
|
CONFIG_HAS_IMX_GPIO
|
|
CONFIG_HAS_IMX_HAL
|
|
CONFIG_HAS_IMX_I2C
|
|
CONFIG_HAS_MCG
|
|
CONFIG_HAS_MCUX
|
|
CONFIG_HAS_MCUX_ACMP
|
|
CONFIG_HAS_MCUX_ADC12
|
|
CONFIG_HAS_MCUX_ADC16
|
|
CONFIG_HAS_MCUX_CACHE
|
|
CONFIG_HAS_MCUX_CCM
|
|
CONFIG_HAS_MCUX_CCM_REV2
|
|
CONFIG_HAS_MCUX_CSI
|
|
CONFIG_HAS_MCUX_DAC
|
|
CONFIG_HAS_MCUX_DAC32
|
|
CONFIG_HAS_MCUX_EDMA
|
|
CONFIG_HAS_MCUX_ELCDIF
|
|
CONFIG_HAS_MCUX_ENET
|
|
CONFIG_HAS_MCUX_FLEXCAN
|
|
CONFIG_HAS_MCUX_FLEXCOMM
|
|
CONFIG_HAS_MCUX_FLEXSPI
|
|
CONFIG_HAS_MCUX_FTFX
|
|
CONFIG_HAS_MCUX_FTM
|
|
CONFIG_HAS_MCUX_GPT
|
|
CONFIG_HAS_MCUX_IAP
|
|
CONFIG_HAS_MCUX_IAP_LEGACY
|
|
CONFIG_HAS_MCUX_IGPIO
|
|
CONFIG_HAS_MCUX_LPADC
|
|
CONFIG_HAS_MCUX_LPC_DMA
|
|
CONFIG_HAS_MCUX_LPC_RTC
|
|
CONFIG_HAS_MCUX_LPI2C
|
|
CONFIG_HAS_MCUX_LPSCI
|
|
CONFIG_HAS_MCUX_LPSPI
|
|
CONFIG_HAS_MCUX_LPTMR
|
|
CONFIG_HAS_MCUX_LPUART
|
|
CONFIG_HAS_MCUX_OS_TIMER
|
|
CONFIG_HAS_MCUX_PCC
|
|
CONFIG_HAS_MCUX_PIT
|
|
CONFIG_HAS_MCUX_PWM
|
|
CONFIG_HAS_MCUX_PWT
|
|
CONFIG_HAS_MCUX_RCM
|
|
CONFIG_HAS_MCUX_RDC
|
|
CONFIG_HAS_MCUX_RNG
|
|
CONFIG_HAS_MCUX_RNGA
|
|
CONFIG_HAS_MCUX_RTC
|
|
CONFIG_HAS_MCUX_SCG
|
|
CONFIG_HAS_MCUX_SEMC
|
|
CONFIG_HAS_MCUX_SIM
|
|
CONFIG_HAS_MCUX_SMC
|
|
CONFIG_HAS_MCUX_SYSCON
|
|
CONFIG_HAS_MCUX_TPM
|
|
CONFIG_HAS_MCUX_TRNG
|
|
CONFIG_HAS_MCUX_USB_EHCI
|
|
CONFIG_HAS_MCUX_USDHC1
|
|
CONFIG_HAS_MCUX_USDHC2
|
|
CONFIG_HAS_MCUX_WDOG32
|
|
CONFIG_HAS_MCUX_WWDT
|
|
CONFIG_HAS_MEC_HAL
|
Microchip MEC HAL drivers support |
CONFIG_HAS_MSP432P4XXSDK
|
|
CONFIG_HAS_MULX_INSTRUCTION
|
|
CONFIG_HAS_MUL_INSTRUCTION
|
|
CONFIG_HAS_NEWLIB_LIBC_NANO
|
|
CONFIG_HAS_NORDIC_DRIVERS
|
|
CONFIG_HAS_NO_SYS_PM
|
|
CONFIG_HAS_NRFX
|
|
CONFIG_HAS_NUMICRO_HAL
|
|
CONFIG_HAS_NUMICRO_UART
|
|
CONFIG_HAS_OSC
|
|
CONFIG_HAS_RV32M1_CAU3_BLE
|
|
CONFIG_HAS_RV32M1_FTFX
|
|
CONFIG_HAS_RV32M1_LPI2C
|
|
CONFIG_HAS_RV32M1_LPSPI
|
|
CONFIG_HAS_RV32M1_LPUART
|
|
CONFIG_HAS_RV32M1_TPM
|
|
CONFIG_HAS_SDL
|
|
CONFIG_HAS_SEGGER_RTT
|
|
CONFIG_HAS_SEMTECH_LORAMAC
|
Semtech LoRaMac Stack |
CONFIG_HAS_SEMTECH_RADIO_DRIVERS
|
Semtech LoRa Radio Drivers |
CONFIG_HAS_SEMTECH_SOFT_SE
|
Semtech Secure Element software implementation |
CONFIG_HAS_SEMTECH_SX126X
|
|
CONFIG_HAS_SEMTECH_SX1272
|
|
CONFIG_HAS_SEMTECH_SX1276
|
|
CONFIG_HAS_SILABS_GECKO
|
|
CONFIG_HAS_SPI_DW
|
|
CONFIG_HAS_SRAM_OFFSET
|
|
CONFIG_HAS_STLIB
|
|
CONFIG_HAS_STM32CUBE
|
|
CONFIG_HAS_STM32LIB
|
|
CONFIG_HAS_STMEMSC
|
|
CONFIG_HAS_SWO
|
|
CONFIG_HAS_TELINK_DRIVERS
|
Telink Drivers |
CONFIG_HAS_TI_CCFG
|
|
CONFIG_HAS_WDT_MULTISTAGE
|
|
CONFIG_HAS_XMCLIB
|
|
CONFIG_HAS_XMCLIB_UART
|
|
CONFIG_HAVE_CUSTOM_LINKER_SCRIPT
|
Custom linker scripts provided |
CONFIG_HAWKBIT
|
Hawkbit Firmware Over-the-Air support |
CONFIG_HAWKBIT_LOG_LEVEL
|
|
CONFIG_HAWKBIT_LOG_LEVEL_DBG
|
Debug |
CONFIG_HAWKBIT_LOG_LEVEL_ERR
|
Error |
CONFIG_HAWKBIT_LOG_LEVEL_INF
|
Info |
CONFIG_HAWKBIT_LOG_LEVEL_OFF
|
Off |
CONFIG_HAWKBIT_LOG_LEVEL_WRN
|
Warning |
CONFIG_HAWKBIT_POLL_INTERVAL
|
Time to poll interval (in minutes) |
CONFIG_HAWKBIT_PORT
|
Port address for the hawkbit server |
CONFIG_HAWKBIT_SERVER
|
User address for the hawkbit server |
CONFIG_HAWKBIT_SHELL
|
Enable Hawkbit shell utilities |
CONFIG_HEAP_MEM_POOL_SIZE
|
Heap memory pool size (in bytes) |
CONFIG_HID_INTERRUPT_EP_MPS
|
USB HID Device Interrupt Endpoint size |
CONFIG_HMC5883L
|
HMC5883L magnetometer |
CONFIG_HMC5883L_FS
|
Full-scale range |
CONFIG_HMC5883L_ODR
|
Output data rate |
CONFIG_HMC5883L_THREAD_PRIORITY
|
Thread priority |
CONFIG_HMC5883L_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_HMC5883L_TRIGGER
|
|
CONFIG_HMC5883L_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_HMC5883L_TRIGGER_NONE
|
No trigger |
CONFIG_HMC5883L_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_HP206C
|
HopeRF HP206C precision barometer and altimeter sensor |
CONFIG_HP206C_ALT_OFFSET
|
Altitude offset (in cm) |
CONFIG_HP206C_ALT_OFFSET_RUNTIME
|
Altitude offset set at runtime |
CONFIG_HP206C_OSR
|
Oversampling rate |
CONFIG_HP206C_OSR_RUNTIME
|
Oversampling rate set at runtime |
CONFIG_HPET_TIMER
|
HPET timer |
CONFIG_HT16K33
|
HT16K33 LED driver |
CONFIG_HT16K33_KEYSCAN
|
Enable keyscan support |
CONFIG_HT16K33_KEYSCAN_DEBOUNCE_MSEC
|
Keyscan debounce interval in milliseconds |
CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_PRIO
|
Priority for keyscan interrupt request handler thread |
CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE
|
Stack size for keyscan interrupt request handler thread |
CONFIG_HT16K33_KEYSCAN_POLL_MSEC
|
Keyscan poll interval in milliseconds |
CONFIG_HTS221
|
HTS221 temperature and humidity sensor |
CONFIG_HTS221_ODR
|
Output data rate |
CONFIG_HTS221_THREAD_PRIORITY
|
Thread priority |
CONFIG_HTS221_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_HTS221_TRIGGER
|
|
CONFIG_HTS221_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_HTS221_TRIGGER_NONE
|
No trigger |
CONFIG_HTS221_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_HTTP_CLIENT
|
HTTP client API [EXPERIMENTAL] |
CONFIG_HTTP_PARSER
|
HTTP Parser support |
CONFIG_HTTP_PARSER_STRICT
|
HTTP strict parsing |
CONFIG_HTTP_PARSER_URL
|
HTTP Parser for URL support |
CONFIG_HWINFO
|
Hardware Information driver |
CONFIG_HWINFO_ESP32
|
ESP32 device ID |
CONFIG_HWINFO_GECKO
|
GECKO hwinfo |
CONFIG_HWINFO_IMXRT
|
NXP i.mx RT device ID |
CONFIG_HWINFO_LITEX
|
LiteX device ID |
CONFIG_HWINFO_LOG_LEVEL
|
|
CONFIG_HWINFO_LOG_LEVEL_DBG
|
Debug |
CONFIG_HWINFO_LOG_LEVEL_ERR
|
Error |
CONFIG_HWINFO_LOG_LEVEL_INF
|
Info |
CONFIG_HWINFO_LOG_LEVEL_OFF
|
Off |
CONFIG_HWINFO_LOG_LEVEL_WRN
|
Warning |
CONFIG_HWINFO_MCUX_RCM
|
NXP kinetis reset cause |
CONFIG_HWINFO_MCUX_SIM
|
NXP kinetis SIM device ID |
CONFIG_HWINFO_MCUX_SYSCON
|
NXP LPC device ID |
CONFIG_HWINFO_NRF
|
NRF device ID |
CONFIG_HWINFO_PSOC6
|
Cypress PSoC-6 unique device ID |
CONFIG_HWINFO_SAM
|
Atmel SAM device ID |
CONFIG_HWINFO_SAM0
|
Atmel SAM0 device ID |
CONFIG_HWINFO_SAM4L
|
Atmel SAM4L device ID |
CONFIG_HWINFO_SHELL
|
Enable HWINFO Shell |
CONFIG_HWINFO_STM32
|
STM32 hwinfo |
CONFIG_HW_STACK_PROTECTION
|
Hardware Stack Protection |
CONFIG_I2C
|
I2C Drivers |
CONFIG_I2C_0
|
Enable I2C Port 0 |
CONFIG_I2C_0_NRF_TWI
|
|
CONFIG_I2C_0_NRF_TWIM
|
|
CONFIG_I2C_1
|
Enable I2C Port 1 |
CONFIG_I2C_1_NRF_TWI
|
|
CONFIG_I2C_1_NRF_TWIM
|
|
CONFIG_I2C_2_NRF_TWIM
|
|
CONFIG_I2C_3_NRF_TWIM
|
|
CONFIG_I2C_BITBANG
|
|
CONFIG_I2C_CC13XX_CC26XX
|
TI SimpleLink CC13xx / CC26xx I2C driver |
CONFIG_I2C_CC32XX
|
CC32XX I2C driver |
CONFIG_I2C_DW
|
Design Ware I2C support |
CONFIG_I2C_DW_CLOCK_SPEED
|
Set the clock speed for I2C |
CONFIG_I2C_EEPROM_SLAVE
|
I2C Slave EEPROM driver |
CONFIG_I2C_EMUL
|
I2C emulator |
CONFIG_I2C_ESP32
|
ESP32 I2C |
CONFIG_I2C_ESP32_0_RX_LSB_FIRST
|
Port 0 Receive LSB first |
CONFIG_I2C_ESP32_0_TX_LSB_FIRST
|
Port 0 Transmit LSB first |
CONFIG_I2C_ESP32_1_RX_LSB_FIRST
|
Port 1 Receive LSB first |
CONFIG_I2C_ESP32_1_TX_LSB_FIRST
|
Port 1 Transmit LSB first |
CONFIG_I2C_ESP32_TIMEOUT
|
I2C timeout to receive a data bit in APB clock cycles |
CONFIG_I2C_GECKO
|
Gecko I2C driver |
CONFIG_I2C_GPIO
|
GPIO bit banging I2C support |
CONFIG_I2C_IMX
|
i.MX I2C driver |
CONFIG_I2C_INIT_PRIORITY
|
Init priority |
CONFIG_I2C_ITE_IT8XXX2
|
ITE IT8XXX2 I2C driver |
CONFIG_I2C_LITEX
|
LiteX I2C driver |
CONFIG_I2C_LOG_LEVEL
|
|
CONFIG_I2C_LOG_LEVEL_DBG
|
Debug |
CONFIG_I2C_LOG_LEVEL_ERR
|
Error |
CONFIG_I2C_LOG_LEVEL_INF
|
Info |
CONFIG_I2C_LOG_LEVEL_OFF
|
Off |
CONFIG_I2C_LOG_LEVEL_WRN
|
Warning |
CONFIG_I2C_LPC11U6X
|
LPC11U6X I2C driver |
CONFIG_I2C_MCUX
|
MCUX I2C driver |
CONFIG_I2C_MCUX_FLEXCOMM
|
MCUX FLEXCOMM I2C driver |
CONFIG_I2C_MCUX_LPI2C
|
MCUX LPI2C driver |
CONFIG_I2C_NIOS2
|
Nios-II I2C driver |
CONFIG_I2C_NPCX
|
Nuvoton NPCX embedded controller (EC) I2C driver |
CONFIG_I2C_NRFX
|
nRF TWI nrfx drivers |
CONFIG_I2C_RCAR
|
Renesas R-Car I2C Driver |
CONFIG_I2C_RV32M1_LPI2C
|
RV32M1 LPI2C driver |
CONFIG_I2C_SAM0
|
SAM0 series I2C SERCOM driver |
CONFIG_I2C_SAM0_DMA_DRIVEN
|
Enable DMA support for SAM0 I2C devices |
CONFIG_I2C_SAM_TWI
|
Atmel SAM (TWI) I2C driver |
CONFIG_I2C_SAM_TWIHS
|
Atmel SAM (TWIHS) I2C driver |
CONFIG_I2C_SAM_TWIM
|
Atmel SAM (TWIM) I2C driver |
CONFIG_I2C_SBCON
|
I2C driver for ARM’s SBCon two-wire serial bus interface |
CONFIG_I2C_SHELL
|
Enable I2C Shell |
CONFIG_I2C_SIFIVE
|
Sifive I2C driver |
CONFIG_I2C_SLAVE
|
I2C Slave Drivers |
CONFIG_I2C_SLAVE_INIT_PRIORITY
|
Init priority |
CONFIG_I2C_STM32
|
STM32 I2C driver |
CONFIG_I2C_STM32_COMBINED_INTERRUPT
|
|
CONFIG_I2C_STM32_INTERRUPT
|
STM32 MCU I2C Interrupt Support |
CONFIG_I2C_STM32_V1
|
|
CONFIG_I2C_STM32_V2
|
|
CONFIG_I2C_TEST
|
|
CONFIG_I2C_XEC
|
XEC Microchip I2C driver |
CONFIG_I2S
|
I2S bus drivers |
CONFIG_I2S_CAVS
|
Intel I2S (SSP) Bus Driver |
CONFIG_I2S_INIT_PRIORITY
|
Init priority |
CONFIG_I2S_LITEX
|
Litex I2S driver |
CONFIG_I2S_LITEX_CHANNELS_CONCATENATED
|
Channels placed without padding in fifo |
CONFIG_I2S_LITEX_DATA_BIG_ENDIAN
|
Received data will be stored as big endian |
CONFIG_I2S_LITEX_RX_BLOCK_COUNT
|
RX queue length |
CONFIG_I2S_LITEX_TX_BLOCK_COUNT
|
TX queue length |
CONFIG_I2S_LOG_LEVEL
|
|
CONFIG_I2S_LOG_LEVEL_DBG
|
Debug |
CONFIG_I2S_LOG_LEVEL_ERR
|
Error |
CONFIG_I2S_LOG_LEVEL_INF
|
Info |
CONFIG_I2S_LOG_LEVEL_OFF
|
Off |
CONFIG_I2S_LOG_LEVEL_WRN
|
Warning |
CONFIG_I2S_MCUX_FLEXCOMM
|
MCUX FLEXCOMM I2S driver |
CONFIG_I2S_MCUX_FLEXCOMM_RX_BLOCK_COUNT
|
RX queue length |
CONFIG_I2S_MCUX_FLEXCOMM_TX_BLOCK_COUNT
|
TX queue length |
CONFIG_I2S_SAM_SSC
|
Atmel SAM MCU family I2S (SSC) Bus Driver |
CONFIG_I2S_SAM_SSC_0_PIN_RF_EN
|
RF pin enabled |
CONFIG_I2S_SAM_SSC_0_PIN_RK_EN
|
RK pin enabled |
CONFIG_I2S_SAM_SSC_RX_BLOCK_COUNT
|
RX queue length |
CONFIG_I2S_SAM_SSC_TX_BLOCK_COUNT
|
TX queue length |
CONFIG_I2S_STM32
|
STM32 MCU I2S controller driver |
CONFIG_I2S_STM32_PLLI2S_PLLM
|
Division factor for PLLI2S VCO input clock |
CONFIG_I2S_STM32_PLLI2S_PLLN
|
Multiplier factor for PLLI2S VCO output clock |
CONFIG_I2S_STM32_PLLI2S_PLLR
|
Division factor for I2S clock |
CONFIG_I2S_STM32_RX_BLOCK_COUNT
|
RX queue length |
CONFIG_I2S_STM32_TX_BLOCK_COUNT
|
TX queue length |
CONFIG_I2S_STM32_USE_PLLI2S_ENABLE
|
Enable usage of PLL |
CONFIG_IAQ_CORE_MAX_READ_RETRIES
|
Number of read retries |
CONFIG_ICACHE_LINE_SIZE
|
i-cache line size |
CONFIG_ICACHE_LINE_SIZE_DETECT
|
Detect i-cache line size at runtime |
CONFIG_ICAL_PARSER_LOG_LEVEL
|
|
CONFIG_ICAL_PARSER_LOG_LEVEL_DBG
|
Debug |
CONFIG_ICAL_PARSER_LOG_LEVEL_ERR
|
Error |
CONFIG_ICAL_PARSER_LOG_LEVEL_INF
|
Info |
CONFIG_ICAL_PARSER_LOG_LEVEL_OFF
|
Off |
CONFIG_ICAL_PARSER_LOG_LEVEL_WRN
|
Warning |
CONFIG_ICM42605
|
ICM42605 Six-Axis Motion Tracking Device |
CONFIG_ICM42605_THREAD_PRIORITY
|
Thread priority |
CONFIG_ICM42605_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ICM42605_TRIGGER
|
|
CONFIG_ICM42605_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ICM42605_TRIGGER_NONE
|
No trigger |
CONFIG_ICM42605_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_IDF_TARGET_ESP32
|
ESP32 as target board |
CONFIG_IDF_TARGET_ESP32C3
|
ESP32C3 as target board |
CONFIG_IDLE_STACK_SIZE
|
Size of stack for idle thread |
CONFIG_IDT_NUM_VECTORS
|
Number of IDT vectors |
CONFIG_IEEE802154
|
IEEE 802.15.4 drivers options |
CONFIG_IEEE802154_2015
|
Enable support for IEEE 802.15.4-2015 frames |
CONFIG_IEEE802154_CC1200
|
TI CC1200 Driver support |
CONFIG_IEEE802154_CC1200_CCA_THRESHOLD
|
Value in dbm of the CCA threshold |
CONFIG_IEEE802154_CC1200_DRV_NAME
|
TI CC1200 Driver’s name |
CONFIG_IEEE802154_CC1200_INIT_PRIO
|
CC1200 initialization priority |
CONFIG_IEEE802154_CC1200_MAC4
|
MAC Address Byte 4 |
CONFIG_IEEE802154_CC1200_MAC5
|
MAC Address Byte 5 |
CONFIG_IEEE802154_CC1200_MAC6
|
MAC Address Byte 6 |
CONFIG_IEEE802154_CC1200_MAC7
|
MAC Address Byte 7 |
CONFIG_IEEE802154_CC1200_PKTCFG0
|
|
CONFIG_IEEE802154_CC1200_PKTCFG1
|
|
CONFIG_IEEE802154_CC1200_PKTCFG2
|
|
CONFIG_IEEE802154_CC1200_RANDOM_MAC
|
Random MAC address |
CONFIG_IEEE802154_CC1200_RFEND_CFG0
|
|
CONFIG_IEEE802154_CC1200_RFEND_CFG1
|
|
CONFIG_IEEE802154_CC1200_RF_PRESET
|
Use TI CC1200 RF pre-sets |
CONFIG_IEEE802154_CC1200_RF_SET_0
|
868MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI |
CONFIG_IEEE802154_CC1200_RF_SET_1
|
920MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ARIB |
CONFIG_IEEE802154_CC1200_RF_SET_2
|
434MHz - 50Kbps - 2-GFSK - IEEE 802.15.4g compliant - ETSI |
CONFIG_IEEE802154_CC1200_RSSI_OFFSET
|
Value in dbm of the RSSI offset |
CONFIG_IEEE802154_CC1200_RX_STACK_SIZE
|
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_CC1200_SETTLING_CFG
|
|
CONFIG_IEEE802154_CC1200_XOSC
|
Value of the Crystal oscillator in kHz |
CONFIG_IEEE802154_CC13XX_CC26XX
|
TI CC13xx / CC26xx IEEE 802.15.4 driver support |
CONFIG_IEEE802154_CC13XX_CC26XX_DRV_NAME
|
TI CC13xx / CC26xx IEEE 802.15.4 driver’s name |
CONFIG_IEEE802154_CC13XX_CC26XX_INIT_PRIO
|
TI CC13xx / CC26xx IEEE 802.15.4 initialization priority |
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BE
|
CSMA MAC maximum backoff exponent |
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MAX_BO
|
CSMA maximum backoffs |
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_CSMA_CA_MIN_BE
|
CSMA MAC minimum backoff exponent |
CONFIG_IEEE802154_CC13XX_CC26XX_RADIO_TX_RETRIES
|
Radio Transmission attempts |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ
|
TI CC13xx / CC26xx IEEE 802.15.4g driver support |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ_CS_THRESHOLD
|
TI CC13xx / CC26xx IEEE 802.15.4g Carrier Sense Threshold in dBm |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ_DRV_NAME
|
TI CC13xx / CC26xx IEEE 802.15.4g driver’s name |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ_INIT_PRIO
|
TI CC13xx / CC26xx IEEE 802.15.4g initialization priority |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ_NUM_RX_BUF
|
TI CC13xx / CC26xx IEEE 802.15.4g receive buffer count |
CONFIG_IEEE802154_CC13XX_CC26XX_SUB_GHZ_RADIO_TX_RETRIES
|
Radio Transmission attempts |
CONFIG_IEEE802154_CC2520
|
TI CC2520 Driver support |
CONFIG_IEEE802154_CC2520_CRYPTO
|
Enable hardware crypto helper on cc2520 |
CONFIG_IEEE802154_CC2520_CRYPTO_DRV_NAME
|
TI CC2520 Crypto Driver’s name |
CONFIG_IEEE802154_CC2520_CRYPTO_INIT_PRIO
|
TI CC2520 crypto device initialization priority |
CONFIG_IEEE802154_CC2520_DRV_NAME
|
TI CC2520 Driver’s name |
CONFIG_IEEE802154_CC2520_INIT_PRIO
|
CC2520 initialization priority |
CONFIG_IEEE802154_CC2520_MAC4
|
MAC Address Byte 4 |
CONFIG_IEEE802154_CC2520_MAC5
|
MAC Address Byte 5 |
CONFIG_IEEE802154_CC2520_MAC6
|
MAC Address Byte 6 |
CONFIG_IEEE802154_CC2520_MAC7
|
MAC Address Byte 7 |
CONFIG_IEEE802154_CC2520_RANDOM_MAC
|
Random MAC address |
CONFIG_IEEE802154_CC2520_RX_STACK_SIZE
|
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_CSL_ENDPOINT
|
Enable support for CSL Endpoint |
CONFIG_IEEE802154_DELAY_TRX_ACC
|
Clock accuracy for delayed operations |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL
|
|
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_DBG
|
Debug |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_ERR
|
Error |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_INF
|
Info |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_OFF
|
Off |
CONFIG_IEEE802154_DRIVER_LOG_LEVEL_WRN
|
Warning |
CONFIG_IEEE802154_DW1000
|
Decawave DW1000 Driver support |
CONFIG_IEEE802154_DW1000_INIT_PRIO
|
DW1000 initialization priority |
CONFIG_IEEE802154_DW1000_SNIFF_OFFT
|
SNIFF off time |
CONFIG_IEEE802154_DW1000_SNIFF_ONT
|
SNIFF on time |
CONFIG_IEEE802154_KW41Z
|
NXP KW41Z Driver support |
CONFIG_IEEE802154_KW41Z_DRV_NAME
|
NXP KW41Z Driver’s name |
CONFIG_IEEE802154_KW41Z_INIT_PRIO
|
KW41Z initialization priority |
CONFIG_IEEE802154_MCR20A
|
NXP MCR20A Driver support |
CONFIG_IEEE802154_MCR20A_DRV_NAME
|
NXP MCR20A Driver’s name |
CONFIG_IEEE802154_MCR20A_INIT_PRIO
|
MCR20A initialization priority |
CONFIG_IEEE802154_MCR20A_RX_STACK_SIZE
|
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_NET_IF_NO_AUTO_START
|
Disable 802.15.4 interface auto-start |
CONFIG_IEEE802154_NRF5
|
nRF52 series IEEE 802.15.4 Driver |
CONFIG_IEEE802154_NRF5_DRV_NAME
|
nRF52 IEEE 802.15.4 Driver’s name |
CONFIG_IEEE802154_NRF5_EXT_IRQ_MGMT
|
|
CONFIG_IEEE802154_NRF5_INIT_PRIO
|
nRF52 IEEE 802.15.4 initialization priority |
CONFIG_IEEE802154_NRF5_RX_STACK_SIZE
|
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_NRF5_UICR_EUI64_ENABLE
|
Enables using EUI64 value stored in UICR registers |
CONFIG_IEEE802154_NRF5_UICR_EUI64_REG
|
UICR base register for the EUI64 value |
CONFIG_IEEE802154_RAW_MODE
|
Use IEEE 802.15.4 driver without the MAC stack |
CONFIG_IEEE802154_RDEV
|
|
CONFIG_IEEE802154_RF2XX
|
ATMEL RF2XX Driver support |
CONFIG_IEEE802154_RF2XX_DRV_NAME
|
ATMEL RF2XX Driver’s name |
CONFIG_IEEE802154_RF2XX_INIT_PRIO
|
RF2X initialization priority |
CONFIG_IEEE802154_RF2XX_RX_STACK_SIZE
|
Driver’s internal RX thread stack size |
CONFIG_IEEE802154_UPIPE
|
UART PIPE fake radio driver support for QEMU |
CONFIG_IEEE802154_UPIPE_DRV_NAME
|
UART PIPE Driver name |
CONFIG_IEEE802154_UPIPE_HW_FILTER
|
Hw Filtering |
CONFIG_IEEE802154_UPIPE_MAC4
|
MAC Address Byte 4 |
CONFIG_IEEE802154_UPIPE_MAC5
|
MAC Address Byte 5 |
CONFIG_IEEE802154_UPIPE_MAC6
|
MAC Address Byte 6 |
CONFIG_IEEE802154_UPIPE_MAC7
|
MAC Address Byte 7 |
CONFIG_IEEE802154_UPIPE_RANDOM_MAC
|
Random MAC address |
CONFIG_IEEE802154_VENDOR_OUI
|
Vendor Organizationally Unique Identifier |
CONFIG_IEEE802154_VENDOR_OUI_ENABLE
|
Enables setting Vendor Organizationally Unique Identifier |
CONFIG_IIS2DH
|
IIS2DH I2C/SPI accelerometer sensor driver |
CONFIG_IIS2DH_ODR
|
Accelerometer sampling frequency (ODR) |
CONFIG_IIS2DH_POWER_MODE
|
Sensor Power Modes |
CONFIG_IIS2DH_RANGE
|
Accelerometer Full-scale range setting |
CONFIG_IIS2DH_THREAD_PRIORITY
|
Thread priority |
CONFIG_IIS2DH_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_IIS2DH_TRIGGER
|
|
CONFIG_IIS2DH_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_IIS2DH_TRIGGER_NONE
|
No trigger |
CONFIG_IIS2DH_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_IIS2DLPC
|
IIS2DLPC I2C/SPI accelerometer sensor driver |
CONFIG_IIS2DLPC_TAP
|
Tap and Tap-Tap detection |
CONFIG_IIS2DLPC_THREAD_PRIORITY
|
Thread priority |
CONFIG_IIS2DLPC_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_IIS2DLPC_TRIGGER
|
|
CONFIG_IIS2DLPC_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_IIS2DLPC_TRIGGER_NONE
|
No trigger |
CONFIG_IIS2DLPC_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_IIS2ICLX
|
IIS2ICLX I2C/SPI accelerometer Chip |
CONFIG_IIS2ICLX_ENABLE_TEMP
|
Enable temperature |
CONFIG_IIS2ICLX_EXT_HTS221
|
Enable HTS221 as external sensor |
CONFIG_IIS2ICLX_EXT_IIS2MDC
|
Enable IIS2MDC as external sensor |
CONFIG_IIS2ICLX_EXT_LIS2MDL
|
Enable LIS2MDL as external sensor |
CONFIG_IIS2ICLX_EXT_LPS22HB
|
Enable LPS22HB as external sensor |
CONFIG_IIS2ICLX_EXT_LPS22HH
|
Enable LPS22HH as external sensor |
CONFIG_IIS2ICLX_SENSORHUB
|
Enable I2C sensorhub feature |
CONFIG_IIS2ICLX_THREAD_PRIORITY
|
Thread priority |
CONFIG_IIS2ICLX_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_IIS2ICLX_TRIGGER
|
|
CONFIG_IIS2ICLX_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_IIS2ICLX_TRIGGER_NONE
|
No trigger |
CONFIG_IIS2ICLX_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_IIS2MDC
|
IIS2MDC Magnetometer |
CONFIG_IIS2MDC_MAG_ODR_RUNTIME
|
Set magnetometer sampling frequency (ODR) at runtime (default: 10 Hz) |
CONFIG_IIS2MDC_THREAD_PRIORITY
|
Thread priority |
CONFIG_IIS2MDC_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_IIS2MDC_TRIGGER
|
|
CONFIG_IIS2MDC_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_IIS2MDC_TRIGGER_NONE
|
No trigger |
CONFIG_IIS2MDC_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_IIS3DHHC
|
IIS3DHHC accelerometer sensor |
CONFIG_IIS3DHHC_DRDY_INT1
|
Data ready interrupt to INT1 pin |
CONFIG_IIS3DHHC_NORM_MODE
|
Enable Sensor at 1KHz |
CONFIG_IIS3DHHC_THREAD_PRIORITY
|
Thread priority |
CONFIG_IIS3DHHC_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_IIS3DHHC_TRIGGER
|
|
CONFIG_IIS3DHHC_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_IIS3DHHC_TRIGGER_NONE
|
No trigger |
CONFIG_IIS3DHHC_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_ILI9340
|
ILI9340 display driver |
CONFIG_ILI9341
|
ILI9341 display driver |
CONFIG_ILI9488
|
ILI9488 display driver |
CONFIG_ILI9XXX
|
|
CONFIG_IMAGE_VECTOR_TABLE_OFFSET
|
Image vector table offset |
CONFIG_IMG_BLOCK_BUF_SIZE
|
Image writer buffer size |
CONFIG_IMG_ENABLE_IMAGE_CHECK
|
Enable image check functions |
CONFIG_IMG_ERASE_PROGRESSIVELY
|
Erase flash progressively when receiving new firmware |
CONFIG_IMG_MANAGER
|
DFU image manager |
CONFIG_IMG_MANAGER_LOG_LEVEL
|
|
CONFIG_IMG_MANAGER_LOG_LEVEL_DBG
|
Debug |
CONFIG_IMG_MANAGER_LOG_LEVEL_ERR
|
Error |
CONFIG_IMG_MANAGER_LOG_LEVEL_INF
|
Info |
CONFIG_IMG_MANAGER_LOG_LEVEL_OFF
|
Off |
CONFIG_IMG_MANAGER_LOG_LEVEL_WRN
|
Warning |
CONFIG_IMG_MGMT_DUMMY_HDR
|
Return dummy image header data for imgr functions |
CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT
|
Reject Direct-XIP applications with mismatched address |
CONFIG_IMG_MGMT_UL_CHUNK_SIZE
|
Maximum chunk size for image uploads |
CONFIG_IMG_MGMT_UPDATABLE_IMAGE_NUMBER
|
Number of supported images |
CONFIG_IMG_MGMT_VERBOSE_ERR
|
Verbose logging when uploading a new image |
CONFIG_INCLUDE_RESET_VECTOR
|
Include Reset vector |
CONFIG_INIT_ARCH_HW_AT_BOOT
|
Initialize internal architecture state at boot |
CONFIG_INIT_ARM_PLL
|
Initialize ARM PLL |
CONFIG_INIT_AUDIO_PLL
|
Initialize Audio PLL |
CONFIG_INIT_ENET_PLL
|
|
CONFIG_INIT_STACKS
|
Initialize stack areas |
CONFIG_INIT_SYS_PLL
|
Initialize SYS PLL |
CONFIG_INIT_USB1_PLL
|
Initialize USB1 PLL |
CONFIG_INIT_VIDEO_PLL
|
Initialize Video PLL |
CONFIG_INSTRUMENT_THREAD_SWITCHING
|
|
CONFIG_INTC_ESP32_DECISIONS_LOG
|
Enables ESP32 interrupt allocator logging |
CONFIG_INTEL_GNA
|
Intel GNA Inferencing Engine |
CONFIG_INTEL_GNA_INIT_PRIORITY
|
Init priority |
CONFIG_INTEL_GNA_MAX_MODELS
|
Max number of neural network models supported by driver |
CONFIG_INTEL_GNA_MAX_PENDING_REQUESTS
|
Max number of pending inference requests |
CONFIG_INTEL_GNA_POWER_MODE
|
GNA operation mode |
CONFIG_INTEL_VTD_ICTL
|
Intel VT-D interrupt remapping controller |
CONFIG_INTEL_VTD_ICTL_INIT_PRIORITY
|
Initialization priority |
CONFIG_IOAPIC
|
IO-APIC |
CONFIG_IOAPIC_MASK_RTE
|
Mask out RTE entries on boot |
CONFIG_IPC_BACKEND_RPMSG_MI_NUM_ENDPOINTS_PER_INSTANCE
|
Max number of registered endpoints per instance |
CONFIG_IPC_BACKEND_RPMSG_MI_WORK_QUEUE_STACK_SIZE
|
Size of RX work queue stack |
CONFIG_IPC_SERVICE
|
IPC service support multiple backends |
CONFIG_IPC_SERVICE_BACKEND_REG_PRIORITY
|
Initialization priority of modules registering IPC backend |
CONFIG_IPC_SERVICE_BACKEND_RPMSG_MULTI_INSTANCE
|
RPMsg multiple instance backend |
CONFIG_IPC_SERVICE_LOG_LEVEL
|
|
CONFIG_IPC_SERVICE_LOG_LEVEL_DBG
|
Debug |
CONFIG_IPC_SERVICE_LOG_LEVEL_ERR
|
Error |
CONFIG_IPC_SERVICE_LOG_LEVEL_INF
|
Info |
CONFIG_IPC_SERVICE_LOG_LEVEL_OFF
|
Off |
CONFIG_IPC_SERVICE_LOG_LEVEL_WRN
|
Warning |
CONFIG_IPG_DIV
|
IPG clock divider |
CONFIG_IPM
|
IPM drivers |
CONFIG_IPM_CAVS_IDC
|
CAVS DSP Intra-DSP Communication (IDC) driver |
CONFIG_IPM_CONSOLE
|
Inter-processor Mailbox console |
CONFIG_IPM_CONSOLE_LINE_BUF_LEN
|
IPM console line buffer length |
CONFIG_IPM_CONSOLE_ON_DEV_NAME
|
IPM device name used by console |
CONFIG_IPM_CONSOLE_RECEIVER
|
Inter-processor Mailbox console receiver |
CONFIG_IPM_CONSOLE_SENDER
|
Inter-processor Mailbox console sender |
CONFIG_IPM_CONSOLE_STACK_SIZE
|
Stack size for IPM console receiver thread |
CONFIG_IPM_IMX
|
IMX IPM driver |
CONFIG_IPM_IMX_MAX_DATA_SIZE
|
|
CONFIG_IPM_IMX_MAX_DATA_SIZE_16
|
16 bytes |
CONFIG_IPM_IMX_MAX_DATA_SIZE_4
|
4 bytes |
CONFIG_IPM_IMX_MAX_DATA_SIZE_8
|
8 bytes |
CONFIG_IPM_IMX_MAX_ID_VAL
|
|
CONFIG_IPM_INTEL_ADSP
|
IPM ADSP Host-DSP Communication driver |
CONFIG_IPM_LOG_LEVEL
|
|
CONFIG_IPM_LOG_LEVEL_DBG
|
Debug |
CONFIG_IPM_LOG_LEVEL_ERR
|
Error |
CONFIG_IPM_LOG_LEVEL_INF
|
Info |
CONFIG_IPM_LOG_LEVEL_OFF
|
Off |
CONFIG_IPM_LOG_LEVEL_WRN
|
Warning |
CONFIG_IPM_MCUX
|
MCUX IPM driver |
CONFIG_IPM_MHU
|
IPM MHU driver |
CONFIG_IPM_MSG_CH_0_ENABLE
|
Enable IPM Message Channel 0 |
CONFIG_IPM_MSG_CH_0_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_0_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_10_ENABLE
|
Enable IPM Message Channel 10 |
CONFIG_IPM_MSG_CH_10_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_10_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_11_ENABLE
|
Enable IPM Message Channel 11 |
CONFIG_IPM_MSG_CH_11_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_11_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_12_ENABLE
|
Enable IPM Message Channel 12 |
CONFIG_IPM_MSG_CH_12_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_12_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_13_ENABLE
|
Enable IPM Message Channel 13 |
CONFIG_IPM_MSG_CH_13_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_13_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_14_ENABLE
|
Enable IPM Message Channel 14 |
CONFIG_IPM_MSG_CH_14_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_14_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_15_ENABLE
|
Enable IPM Message Channel 15 |
CONFIG_IPM_MSG_CH_15_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_15_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_1_ENABLE
|
Enable IPM Message Channel 1 |
CONFIG_IPM_MSG_CH_1_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_1_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_2_ENABLE
|
Enable IPM Message Channel 2 |
CONFIG_IPM_MSG_CH_2_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_2_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_3_ENABLE
|
Enable IPM Message Channel 3 |
CONFIG_IPM_MSG_CH_3_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_3_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_4_ENABLE
|
Enable IPM Message Channel 4 |
CONFIG_IPM_MSG_CH_4_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_4_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_5_ENABLE
|
Enable IPM Message Channel 5 |
CONFIG_IPM_MSG_CH_5_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_5_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_6_ENABLE
|
Enable IPM Message Channel 6 |
CONFIG_IPM_MSG_CH_6_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_6_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_7_ENABLE
|
Enable IPM Message Channel 7 |
CONFIG_IPM_MSG_CH_7_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_7_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_8_ENABLE
|
Enable IPM Message Channel 8 |
CONFIG_IPM_MSG_CH_8_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_8_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_CH_9_ENABLE
|
Enable IPM Message Channel 9 |
CONFIG_IPM_MSG_CH_9_RX
|
IPM Message RX Channel |
CONFIG_IPM_MSG_CH_9_TX
|
IPM Message TX Channel |
CONFIG_IPM_MSG_ID
|
IPM message identifier. |
CONFIG_IPM_NRFX
|
IPM NRF driver |
CONFIG_IPM_NRF_SINGLE_INSTANCE
|
Single instance of IPM device |
CONFIG_IPM_STM32_IPCC
|
STM32 IPCC controller |
CONFIG_IPM_STM32_IPCC_PROCID
|
STM32 IPCC Processor ID |
CONFIG_IRQ_OFFLOAD
|
Enable IRQ offload |
CONFIG_IRQ_OFFLOAD_INTNUM
|
IRQ offload SW interrupt index |
CONFIG_IRQ_OFFLOAD_VECTOR
|
IDT vector to use for IRQ offload |
CONFIG_ISA_ARCV2
|
ARC ISA v2 |
CONFIG_ISA_ARCV3
|
ARC ISA v3 |
CONFIG_ISA_ARM
|
|
CONFIG_ISA_THUMB2
|
|
CONFIG_ISL29035
|
ISL29035 light sensor |
CONFIG_ISL29035_INTEGRATION_TIME_105K
|
105 ms |
CONFIG_ISL29035_INTEGRATION_TIME_26
|
0.0256 ms |
CONFIG_ISL29035_INTEGRATION_TIME_410
|
0.41 ms |
CONFIG_ISL29035_INTEGRATION_TIME_6500
|
6.5 ms |
CONFIG_ISL29035_INT_PERSIST_1
|
1 |
CONFIG_ISL29035_INT_PERSIST_16
|
16 |
CONFIG_ISL29035_INT_PERSIST_4
|
4 |
CONFIG_ISL29035_INT_PERSIST_8
|
8 |
CONFIG_ISL29035_LUX_RANGE_16K
|
16000 |
CONFIG_ISL29035_LUX_RANGE_1K
|
1000 |
CONFIG_ISL29035_LUX_RANGE_4K
|
4000 |
CONFIG_ISL29035_LUX_RANGE_64K
|
64000 |
CONFIG_ISL29035_MODE_ALS
|
ambient light |
CONFIG_ISL29035_MODE_IR
|
infrared |
CONFIG_ISL29035_THREAD_PRIORITY
|
Thread priority |
CONFIG_ISL29035_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ISL29035_TRIGGER
|
|
CONFIG_ISL29035_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ISL29035_TRIGGER_NONE
|
No trigger |
CONFIG_ISL29035_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_ISM330DHCX
|
ISM330DHCX I2C/SPI accelerometer and gyroscope Chip |
CONFIG_ISM330DHCX_ENABLE_TEMP
|
Enable temperature |
CONFIG_ISM330DHCX_EXT_HTS221
|
Enable HTS221 as external sensor |
CONFIG_ISM330DHCX_EXT_IIS2MDC
|
Enable IIS2MDC as external sensor |
CONFIG_ISM330DHCX_EXT_LIS2MDL
|
Enable LIS2MDL as external sensor |
CONFIG_ISM330DHCX_EXT_LPS22HB
|
Enable LPS22HB as external sensor |
CONFIG_ISM330DHCX_EXT_LPS22HH
|
Enable LPS22HH as external sensor |
CONFIG_ISM330DHCX_SENSORHUB
|
Enable I2C sensorhub feature |
CONFIG_ISM330DHCX_THREAD_PRIORITY
|
Thread priority |
CONFIG_ISM330DHCX_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_ISM330DHCX_TRIGGER
|
|
CONFIG_ISM330DHCX_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_ISM330DHCX_TRIGGER_NONE
|
No trigger |
CONFIG_ISM330DHCX_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_ISOTP
|
ISO-TP Transport [EXPERIMENTAL] |
CONFIG_ISOTP_A_TIMEOUT
|
Ar and As timeout [ms] (sending and receiving timeout) |
CONFIG_ISOTP_BS_TIMEOUT
|
Bs timeout [ms] (timeout for receiving the frame control) |
CONFIG_ISOTP_BUF_TX_DATA_POOL_SIZE
|
Size of the memory pool where buffers are allocated from |
CONFIG_ISOTP_CR_TIMEOUT
|
Cr timeout [ms] (timeout for consecutive frames) |
CONFIG_ISOTP_ENABLE_CONTEXT_BUFFERS
|
Enable buffered tx contexts |
CONFIG_ISOTP_ENABLE_TX_PADDING
|
Enable padding for transmitted messages |
CONFIG_ISOTP_LOG_LEVEL
|
|
CONFIG_ISOTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_ISOTP_LOG_LEVEL_ERR
|
Error |
CONFIG_ISOTP_LOG_LEVEL_INF
|
Info |
CONFIG_ISOTP_LOG_LEVEL_OFF
|
Off |
CONFIG_ISOTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_ISOTP_REQUIRE_RX_PADDING
|
Require padding for received messages |
CONFIG_ISOTP_RX_BUF_COUNT
|
Number of data buffers for receiving data |
CONFIG_ISOTP_RX_BUF_SIZE
|
Size of one buffer data block |
CONFIG_ISOTP_RX_SF_FF_BUF_COUNT
|
Number of SF and FF data buffers for receiving data |
CONFIG_ISOTP_TX_BUF_COUNT
|
Number of data buffers for sending data |
CONFIG_ISOTP_TX_CONTEXT_BUF_COUNT
|
Amount of context buffers for sending data |
CONFIG_ISOTP_USE_TX_BUF
|
Buffer tx writes |
CONFIG_ISOTP_WFTMAX
|
WFTmax (Max WAIT frames before aborting). |
CONFIG_ISR_DEPTH
|
Maximum IRQ nesting depth |
CONFIG_ISR_STACK_SIZE
|
ISR and initialization stack size (in bytes) |
CONFIG_ISR_SUBSTACK_SIZE
|
Size of ISR substacks |
CONFIG_IS_BOOTLOADER
|
Act as a bootloader |
CONFIG_ITDS
|
WSEN-ITDS 3-axis accel sensor |
CONFIG_ITDS_TRIGGER
|
Trigger mode |
CONFIG_ITE_IT8XXX2_INTC
|
|
CONFIG_ITE_IT8XXX2_TIMER
|
ITE it8xxx2 timer driver |
CONFIG_IVSHMEM
|
Inter-VM shared memory device (ivshmem) |
CONFIG_IVSHMEM_DEV_NAME
|
|
CONFIG_IVSHMEM_DOORBELL
|
Support interrupt based ivshmem (doorbell version) |
CONFIG_IVSHMEM_INT_PRIORITY
|
Interrupt priority |
CONFIG_IVSHMEM_LOG_LEVEL
|
|
CONFIG_IVSHMEM_LOG_LEVEL_DBG
|
Debug |
CONFIG_IVSHMEM_LOG_LEVEL_ERR
|
Error |
CONFIG_IVSHMEM_LOG_LEVEL_INF
|
Info |
CONFIG_IVSHMEM_LOG_LEVEL_OFF
|
Off |
CONFIG_IVSHMEM_LOG_LEVEL_WRN
|
Warning |
CONFIG_IVSHMEM_MSI_X_VECTORS
|
How many notification vectors should be pre-allocated? |
CONFIG_IVSHMEM_SHELL
|
Enable IVshmem shell module |
CONFIG_IWDG_STM32
|
Independent Watchdog (IWDG) Driver for STM32 family of MCUs |
CONFIG_IWDG_STM32_INITIAL_TIMEOUT
|
Value for IWDG timeout in ms |
CONFIG_JSON_LIBRARY
|
Build JSON library |
CONFIG_JWT
|
JSON Web Token generation |
CONFIG_JWT_SIGN_ECDSA
|
Use ECDSA signature (ES-256) |
CONFIG_JWT_SIGN_RSA
|
Use RSA signature (RS-256) |
CONFIG_K6X_HSRUN
|
High Speed RUN mode |
CONFIG_K8X_BUS_CLOCK_DIVIDER
|
Freescale K8x bus clock divider |
CONFIG_K8X_CORE_CLOCK_DIVIDER
|
Freescale K8x core clock divider |
CONFIG_K8X_FLASH_CLOCK_DIVIDER
|
Freescale K8x flash clock divider |
CONFIG_K8X_FLEXBUS_CLOCK_DIVIDER
|
Freescale K8x FlexBus clock divider |
CONFIG_KERNEL_BIN_NAME
|
The kernel binary name |
CONFIG_KERNEL_COHERENCE
|
Place all shared data into coherent memory |
CONFIG_KERNEL_ENTRY
|
Kernel entry symbol |
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT
|
Default init priority |
CONFIG_KERNEL_INIT_PRIORITY_DEVICE
|
Default init priority for device drivers |
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS
|
Kernel objects initialization priority |
CONFIG_KERNEL_LOG_LEVEL
|
|
CONFIG_KERNEL_LOG_LEVEL_DBG
|
Debug |
CONFIG_KERNEL_LOG_LEVEL_ERR
|
Error |
CONFIG_KERNEL_LOG_LEVEL_INF
|
Info |
CONFIG_KERNEL_LOG_LEVEL_OFF
|
Off |
CONFIG_KERNEL_LOG_LEVEL_WRN
|
Warning |
CONFIG_KERNEL_MEM_POOL
|
Use Kernel Memory Pool |
CONFIG_KERNEL_SHELL
|
Enable kernel shell |
CONFIG_KERNEL_SHELL_REBOOT_DELAY
|
Delay between reception of shell reboot command and reboot (ms) |
CONFIG_KERNEL_VM_BASE
|
Virtual address space base address |
CONFIG_KERNEL_VM_OFFSET
|
Kernel offset within address space |
CONFIG_KERNEL_VM_SIZE
|
Size of kernel address space in bytes |
CONFIG_KINETIS_FLASH_CONFIG
|
Kinetis flash configuration field |
CONFIG_KINETIS_FLASH_CONFIG_FDPROT
|
Data flash protection byte (FDPROT) |
CONFIG_KINETIS_FLASH_CONFIG_FEPROT
|
EEPROM protection byte (FEPROT) |
CONFIG_KINETIS_FLASH_CONFIG_FOPT
|
Flash nonvolatile option byte (FOPT) |
CONFIG_KINETIS_FLASH_CONFIG_FSEC
|
Flash security byte (FSEC) |
CONFIG_KINETIS_FLASH_CONFIG_OFFSET
|
Kinetis flash configuration field offset |
CONFIG_KINETIS_KE1XF_ENABLE_CODE_CACHE
|
Enable the code cache |
CONFIG_KOBJECT_DATA_AREA_RESERVE_EXTRA_PERCENT
|
Reserve extra kobject data area (in percentage) |
CONFIG_KOBJECT_RODATA_AREA_EXTRA_BYTES
|
Reserve extra bytes for kobject rodata area |
CONFIG_KOBJECT_TEXT_AREA
|
Size of kobject text area |
CONFIG_KSCAN
|
Keyboard Scan Drivers |
CONFIG_KSCAN_FT5336
|
FT5XX6/FT6XX6 capacitive touch panel driver |
CONFIG_KSCAN_FT5336_INTERRUPT
|
Enable interrupt |
CONFIG_KSCAN_FT5336_PERIOD
|
Sample period |
CONFIG_KSCAN_HT16K33
|
HT16K33 keyscan driver |
CONFIG_KSCAN_INIT_PRIORITY
|
Keyboard scan driver init priority |
CONFIG_KSCAN_LOG_LEVEL
|
|
CONFIG_KSCAN_LOG_LEVEL_DBG
|
Debug |
CONFIG_KSCAN_LOG_LEVEL_ERR
|
Error |
CONFIG_KSCAN_LOG_LEVEL_INF
|
Info |
CONFIG_KSCAN_LOG_LEVEL_OFF
|
Off |
CONFIG_KSCAN_LOG_LEVEL_WRN
|
Warning |
CONFIG_KSCAN_SDL
|
SDL event filter for touch panel emulation |
CONFIG_KSCAN_XEC
|
XEC Microchip KSCAN driver |
CONFIG_KSCAN_XEC_COLUMN_SIZE
|
KSCAN_XEC_COLUMN_SIZE |
CONFIG_KSCAN_XEC_DEBOUNCE_DOWN
|
KSCAN_XEC_DEBOUNCE_DOWN |
CONFIG_KSCAN_XEC_DEBOUNCE_UP
|
KSCAN_XEC_DEBOUNCE_UP |
CONFIG_KSCAN_XEC_POLL_PERIOD
|
KSCAN_XEC_POLL_PERIOD |
CONFIG_KSCAN_XEC_ROW_SIZE
|
KSCAN_XEC_ROW_SIZE |
CONFIG_KW41_DBG_TRACE
|
Enabled simplified debug tracing of events |
CONFIG_LAZY_FPU_SHARING
|
|
CONFIG_LED
|
LED drivers |
CONFIG_LED_GPIO
|
GPIO LED driver |
CONFIG_LED_INIT_PRIORITY
|
LED initialization priority |
CONFIG_LED_LOG_LEVEL
|
|
CONFIG_LED_LOG_LEVEL_DBG
|
Debug |
CONFIG_LED_LOG_LEVEL_ERR
|
Error |
CONFIG_LED_LOG_LEVEL_INF
|
Info |
CONFIG_LED_LOG_LEVEL_OFF
|
Off |
CONFIG_LED_LOG_LEVEL_WRN
|
Warning |
CONFIG_LED_PWM
|
PWM LED driver |
CONFIG_LED_SHELL
|
LED shell |
CONFIG_LED_STRIP
|
LED strip drivers |
CONFIG_LED_STRIP_INIT_PRIORITY
|
LED strip initialization priority |
CONFIG_LED_STRIP_LOG_LEVEL
|
|
CONFIG_LED_STRIP_LOG_LEVEL_DBG
|
Debug |
CONFIG_LED_STRIP_LOG_LEVEL_ERR
|
Error |
CONFIG_LED_STRIP_LOG_LEVEL_INF
|
Info |
CONFIG_LED_STRIP_LOG_LEVEL_OFF
|
Off |
CONFIG_LED_STRIP_LOG_LEVEL_WRN
|
Warning |
CONFIG_LED_STRIP_RGB_SCRATCH
|
|
CONFIG_LEON_GPTIMER
|
LEON timer |
CONFIG_LEON_IRQMP
|
GRLIB IRQMP interrupt controller |
CONFIG_LEUART_GECKO
|
Gecko leuart driver |
CONFIG_LIBMETAL
|
libmetal Support |
CONFIG_LIBMETAL_SRC_PATH
|
libmetal library source path |
CONFIG_LIB_CPLUSPLUS
|
Link with STD C++ library |
CONFIG_LINKER_ORPHAN_SECTION_ERROR
|
Error |
CONFIG_LINKER_ORPHAN_SECTION_PLACE
|
Place |
CONFIG_LINKER_ORPHAN_SECTION_WARN
|
Warn |
CONFIG_LINKER_SORT_BY_ALIGNMENT
|
Sort input sections by alignment |
CONFIG_LINKER_USE_BOOT_SECTION
|
Enable Usage of Boot Linker Section |
CONFIG_LINKER_USE_PINNED_SECTION
|
Enable Usage of Pinned Linker Section |
CONFIG_LIS2DH
|
LIS2DH Three Axis Accelerometer |
CONFIG_LIS2DH_ACCEL_RANGE_16G
|
+/-16g |
CONFIG_LIS2DH_ACCEL_RANGE_2G
|
+/-2g |
CONFIG_LIS2DH_ACCEL_RANGE_4G
|
+/-4g |
CONFIG_LIS2DH_ACCEL_RANGE_8G
|
+/-8g |
CONFIG_LIS2DH_ACCEL_RANGE_RUNTIME
|
Set at runtime |
CONFIG_LIS2DH_ODR_1
|
1Hz |
CONFIG_LIS2DH_ODR_2
|
10Hz |
CONFIG_LIS2DH_ODR_3
|
25Hz |
CONFIG_LIS2DH_ODR_4
|
50Hz |
CONFIG_LIS2DH_ODR_5
|
100Hz |
CONFIG_LIS2DH_ODR_6
|
200Hz |
CONFIG_LIS2DH_ODR_7
|
400Hz |
CONFIG_LIS2DH_ODR_8
|
1.6KHz |
CONFIG_LIS2DH_ODR_9_LOW
|
5KHz |
CONFIG_LIS2DH_ODR_9_NORMAL
|
1.25KHz |
CONFIG_LIS2DH_ODR_RUNTIME
|
Set at runtime |
CONFIG_LIS2DH_OPER_MODE_HIGH_RES
|
high resolution (12 bit) |
CONFIG_LIS2DH_OPER_MODE_LOW_POWER
|
low power (8 bit) |
CONFIG_LIS2DH_OPER_MODE_NORMAL
|
normal (10 bit) |
CONFIG_LIS2DH_THREAD_PRIORITY
|
Thread priority |
CONFIG_LIS2DH_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LIS2DH_TRIGGER
|
|
CONFIG_LIS2DH_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LIS2DH_TRIGGER_NONE
|
No trigger |
CONFIG_LIS2DH_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LIS2DS12
|
LIS2DS12 I2C/SPI accelerometer sensor driver |
CONFIG_LIS2DS12_ENABLE_TEMP
|
Enable temperature |
CONFIG_LIS2DS12_FS
|
Accelerometer full-scale range |
CONFIG_LIS2DS12_ODR
|
Accelerometer Output data rate frequency |
CONFIG_LIS2DS12_THREAD_PRIORITY
|
Thread priority |
CONFIG_LIS2DS12_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LIS2DS12_TRIGGER
|
|
CONFIG_LIS2DS12_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LIS2DS12_TRIGGER_NONE
|
No trigger |
CONFIG_LIS2DS12_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LIS2DW12
|
LIS2DW12 I2C/SPI accelerometer sensor driver |
CONFIG_LIS2DW12_TAP
|
Tap and Tap-Tap detection |
CONFIG_LIS2DW12_THREAD_PRIORITY
|
Thread priority |
CONFIG_LIS2DW12_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LIS2DW12_TRIGGER
|
|
CONFIG_LIS2DW12_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LIS2DW12_TRIGGER_NONE
|
No trigger |
CONFIG_LIS2DW12_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LIS2MDL
|
LIS2MDL Magnetometer |
CONFIG_LIS2MDL_MAG_ODR_RUNTIME
|
Set magnetometer sampling frequency (ODR) at runtime (default: 10 Hz) |
CONFIG_LIS2MDL_THREAD_PRIORITY
|
Thread priority |
CONFIG_LIS2MDL_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LIS2MDL_TRIGGER
|
|
CONFIG_LIS2MDL_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LIS2MDL_TRIGGER_NONE
|
No trigger |
CONFIG_LIS2MDL_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LIS3MDL
|
LIS3MDL magnetometer |
CONFIG_LIS3MDL_FS
|
Full-scale range |
CONFIG_LIS3MDL_ODR
|
Output data rate |
CONFIG_LIS3MDL_THREAD_PRIORITY
|
Thread priority |
CONFIG_LIS3MDL_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LIS3MDL_TRIGGER
|
|
CONFIG_LIS3MDL_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LIS3MDL_TRIGGER_NONE
|
No trigger |
CONFIG_LIS3MDL_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LITEX_TIMER
|
LiteX Timer |
CONFIG_LLMNR_RESOLVER
|
Enable LLMNR support |
CONFIG_LLMNR_RESOLVER_ADDITIONAL_BUF_CTR
|
Additional DNS buffers |
CONFIG_LLMNR_RESPONDER
|
LLMNR responder |
CONFIG_LLMNR_RESPONDER_INIT_PRIO
|
Startup priority for the LLMNR responder init |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL
|
|
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DBG
|
Debug |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_ERR
|
Error |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_INF
|
Info |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_OFF
|
Off |
CONFIG_LLMNR_RESPONDER_LOG_LEVEL_WRN
|
Warning |
CONFIG_LLMNR_RESPONDER_TTL
|
Time-to-Live of returned DNS name |
CONFIG_LM75
|
LM75 Temperature Sensor |
CONFIG_LOAPIC
|
LOAPIC |
CONFIG_LOAPIC_BASE_ADDRESS
|
Local APIC Base Address |
CONFIG_LOAPIC_SPURIOUS_VECTOR
|
Handle LOAPIC spurious interrupts |
CONFIG_LOAPIC_SPURIOUS_VECTOR_ID
|
LOAPIC spurious vector ID |
CONFIG_LOG
|
Logging |
CONFIG_LOG2
|
|
CONFIG_LOG2_ALWAYS_RUNTIME
|
Always use runtime message creation (v2) |
CONFIG_LOG2_FMT_SECTION
|
Keep log strings in dedicated section |
CONFIG_LOG2_MODE_DEFERRED
|
Deferred logging v2 |
CONFIG_LOG2_MODE_IMMEDIATE
|
Synchronous v2 |
CONFIG_LOG2_USE_VLA
|
Using variable length arrays |
CONFIG_LOG_BACKEND_ADSP
|
Enable Intel ADSP buffer backend |
CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP
|
Enable timestamp formatting in the backend |
CONFIG_LOG_BACKEND_FS
|
Enable LittleFS backend |
CONFIG_LOG_BACKEND_FS_DIR
|
Log directory |
CONFIG_LOG_BACKEND_FS_FILES_LIMIT
|
Max number of files containing logs |
CONFIG_LOG_BACKEND_FS_FILE_PREFIX
|
Log file name prefix |
CONFIG_LOG_BACKEND_FS_FILE_SIZE
|
User defined log file size |
CONFIG_LOG_BACKEND_FS_OUTPUT_DICTIONARY
|
|
CONFIG_LOG_BACKEND_FS_OUTPUT_DICTIONARY_BIN
|
Dictionary (binary) |
CONFIG_LOG_BACKEND_FS_OUTPUT_TEXT
|
Text |
CONFIG_LOG_BACKEND_FS_OVERWRITE
|
Enable old log files overwrite |
CONFIG_LOG_BACKEND_NATIVE_POSIX
|
Enable native backend |
CONFIG_LOG_BACKEND_NET
|
Enable networking backend |
CONFIG_LOG_BACKEND_NET_AUTOSTART
|
Automatically start networking backend |
CONFIG_LOG_BACKEND_NET_MAX_BUF
|
How many network buffers to allocate for sending messages |
CONFIG_LOG_BACKEND_NET_MAX_BUF_SIZE
|
Max syslog message size |
CONFIG_LOG_BACKEND_NET_SERVER
|
Syslog server IP address |
CONFIG_LOG_BACKEND_NET_SYST_ENABLE
|
Enable networking syst backend |
CONFIG_LOG_BACKEND_RTT
|
Enable Segger J-Link RTT backend |
CONFIG_LOG_BACKEND_RTT_BUFFER
|
Buffer number used for logger output. |
CONFIG_LOG_BACKEND_RTT_BUFFER_SIZE
|
Size of reserved up-buffer for logger output. |
CONFIG_LOG_BACKEND_RTT_FORCE_PRINTK
|
|
CONFIG_LOG_BACKEND_RTT_MESSAGE_SIZE
|
Size of internal buffer for storing messages. |
CONFIG_LOG_BACKEND_RTT_MODE_BLOCK
|
Block until message is transferred to host. |
CONFIG_LOG_BACKEND_RTT_MODE_DROP
|
Drop messages that do not fit in up-buffer. |
CONFIG_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
|
Size of the output buffer |
CONFIG_LOG_BACKEND_RTT_RETRY_CNT
|
Number of retries |
CONFIG_LOG_BACKEND_RTT_RETRY_DELAY_MS
|
Delay between TX retries in milliseconds |
CONFIG_LOG_BACKEND_RTT_SYST_ENABLE
|
Enable RTT syst backend |
CONFIG_LOG_BACKEND_SHOW_COLOR
|
Enable colors in the backend |
CONFIG_LOG_BACKEND_SPINEL
|
Enable OpenThread dedicated Spinel protocol backend |
CONFIG_LOG_BACKEND_SPINEL_BUFFER_SIZE
|
Size of reserved up-buffer for logger output. |
CONFIG_LOG_BACKEND_SWO
|
Enable Serial Wire Output (SWO) backend |
CONFIG_LOG_BACKEND_SWO_FREQ_HZ
|
Set SWO output frequency |
CONFIG_LOG_BACKEND_SWO_SYST_ENABLE
|
Enable SWO syst backend |
CONFIG_LOG_BACKEND_UART
|
Enable UART backend |
CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY
|
|
CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY_BIN
|
Dictionary (binary) |
CONFIG_LOG_BACKEND_UART_OUTPUT_DICTIONARY_HEX
|
Dictionary (hexadecimal) |
CONFIG_LOG_BACKEND_UART_OUTPUT_TEXT
|
Text |
CONFIG_LOG_BACKEND_UART_SYST_ENABLE
|
MIPI SyS-T |
CONFIG_LOG_BACKEND_XTENSA_OUTPUT_BUFFER_SIZE
|
Size of the output buffer |
CONFIG_LOG_BACKEND_XTENSA_SIM
|
Enable xtensa simulator backend |
CONFIG_LOG_BLOCK_IN_THREAD
|
Block in thread context on full |
CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS
|
Maximum time (in milliseconds) thread can be blocked |
CONFIG_LOG_BUFFER_SIZE
|
Number of bytes dedicated for the logger internal buffer |
CONFIG_LOG_CMDS
|
Enable shell commands |
CONFIG_LOG_DEFAULT_LEVEL
|
Default log level |
CONFIG_LOG_DETECT_MISSED_STRDUP
|
Detect missed handling of transient strings |
CONFIG_LOG_DICTIONARY_SUPPORT
|
|
CONFIG_LOG_DOMAIN_ID
|
Domain ID |
CONFIG_LOG_FRONTEND
|
Frontend |
CONFIG_LOG_FUNC_NAME_PREFIX_DBG
|
Debug messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_ERR
|
Error messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_INF
|
Info messages prepended |
CONFIG_LOG_FUNC_NAME_PREFIX_WRN
|
Warning messages prepended |
CONFIG_LOG_IMMEDIATE
|
|
CONFIG_LOG_IMMEDIATE_CLEAN_OUTPUT
|
Clean log output |
CONFIG_LOG_MAX_LEVEL
|
Maximal log level compiled in the system |
CONFIG_LOG_MINIMAL
|
|
CONFIG_LOG_MIPI_SYST_ENABLE
|
Enable MIPI SyS-T format output |
CONFIG_LOG_MODE_DEFERRED
|
Deferred logging |
CONFIG_LOG_MODE_IMMEDIATE
|
Synchronous |
CONFIG_LOG_MODE_MINIMAL
|
Minimal-footprint |
CONFIG_LOG_MODE_OVERFLOW
|
Drop oldest message when full |
CONFIG_LOG_OVERRIDE_LEVEL
|
Override lowest log level |
CONFIG_LOG_PRINTK
|
Process printk messages |
CONFIG_LOG_PRINTK_MAX_STRING_LENGTH
|
Maximum string length supported by LOG_PRINTK |
CONFIG_LOG_PROCESS_THREAD
|
Use internal thread for log processing |
CONFIG_LOG_PROCESS_THREAD_SLEEP_MS
|
Set internal log processing thread sleep period |
CONFIG_LOG_PROCESS_THREAD_STACK_SIZE
|
Stack size for the internal log processing thread |
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS
|
Set log processing thread startup delay |
CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD
|
Number of buffered log messages before flushing |
CONFIG_LOG_RUNTIME_FILTERING
|
Runtime filtering reconfiguration |
CONFIG_LOG_SPEED
|
Prefer performance over size |
CONFIG_LOG_STRDUP_BUF_COUNT
|
Number of buffers in the pool used by log_strdup() |
CONFIG_LOG_STRDUP_MAX_STRING
|
Longest string that can be duplicated using log_strdup() |
CONFIG_LOG_STRDUP_POOL_PROFILING
|
Enable profiling of pool used for log_strdup() |
CONFIG_LOG_TEST_CLEAR_MESSAGE_SPACE
|
Clear message after allocation |
CONFIG_LOG_TIMESTAMP_64BIT
|
Use 64 bit timestamp |
CONFIG_LOG_TRACE_SHORT_TIMESTAMP
|
Use 24 bit timestamp for tracing |
CONFIG_LOOPBACK_BULK_EP_MPS
|
|
CONFIG_LORA
|
LoRa support [EXPERIMENTAL] |
CONFIG_LORAMAC_REGION_AS923
|
Asia 923MHz Frequency band |
CONFIG_LORAMAC_REGION_AU915
|
Australia 915MHz Frequency band |
CONFIG_LORAMAC_REGION_CN470
|
China 470MHz Frequency band |
CONFIG_LORAMAC_REGION_CN779
|
China 779MHz Frequency band |
CONFIG_LORAMAC_REGION_EU433
|
Europe 433MHz Frequency band |
CONFIG_LORAMAC_REGION_EU868
|
Europe 868MHz Frequency band |
CONFIG_LORAMAC_REGION_IN865
|
India 865MHz Frequency band |
CONFIG_LORAMAC_REGION_KR920
|
South Korea 920MHz Frequency band |
CONFIG_LORAMAC_REGION_RU864
|
Russia 864MHz Frequency band |
CONFIG_LORAMAC_REGION_UNKNOWN
|
Unknown region |
CONFIG_LORAMAC_REGION_US915
|
North America 915MHz Frequency band |
CONFIG_LORAWAN
|
LoRaWAN support [EXPERIMENTAL] |
CONFIG_LORAWAN_LOG_LEVEL
|
|
CONFIG_LORAWAN_LOG_LEVEL_DBG
|
Debug |
CONFIG_LORAWAN_LOG_LEVEL_ERR
|
Error |
CONFIG_LORAWAN_LOG_LEVEL_INF
|
Info |
CONFIG_LORAWAN_LOG_LEVEL_OFF
|
Off |
CONFIG_LORAWAN_LOG_LEVEL_WRN
|
Warning |
CONFIG_LORAWAN_SYSTEM_MAX_RX_ERROR
|
LoRaWAN System Max Rx Error |
CONFIG_LORA_INIT_PRIORITY
|
LoRa initialization priority |
CONFIG_LORA_LOG_LEVEL
|
|
CONFIG_LORA_LOG_LEVEL_DBG
|
Debug |
CONFIG_LORA_LOG_LEVEL_ERR
|
Error |
CONFIG_LORA_LOG_LEVEL_INF
|
Info |
CONFIG_LORA_LOG_LEVEL_OFF
|
Off |
CONFIG_LORA_LOG_LEVEL_WRN
|
Warning |
CONFIG_LORA_SHELL
|
Enable LoRa Shell |
CONFIG_LORA_STM32WL_SUBGHZ_RADIO
|
STM32WL SUBGHZ radio driver |
CONFIG_LORA_SX126X
|
Semtech SX126x driver |
CONFIG_LORA_SX127X
|
Semtech SX127x driver |
CONFIG_LORA_SX12XX
|
Semtech SX-series driver |
CONFIG_LP3943
|
LP3943 LED driver |
CONFIG_LP503X
|
LP503X LED controller |
CONFIG_LP5562
|
LP5562 LED driver |
CONFIG_LPADC_DO_OFFSET_CALIBRATION
|
Do offset calibration |
CONFIG_LPD880X_STRIP
|
Enable LPD880x SPI LED strip driver |
CONFIG_LPS22HB
|
LPS22HB pressure and temperature |
CONFIG_LPS22HB_SAMPLING_RATE
|
Output data rate |
CONFIG_LPS22HH
|
LPS22HH pressure and temperature |
CONFIG_LPS22HH_SAMPLING_RATE
|
Output data rate |
CONFIG_LPS22HH_THREAD_PRIORITY
|
Thread priority |
CONFIG_LPS22HH_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LPS22HH_TRIGGER
|
|
CONFIG_LPS22HH_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LPS22HH_TRIGGER_NONE
|
No trigger |
CONFIG_LPS22HH_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LPS25HB
|
LPS25HB pressure and temperature |
CONFIG_LPS25HB_SAMPLING_RATE
|
Output data rate |
CONFIG_LS0XX
|
LS0XX memory display controller driver |
CONFIG_LSM303DLHC_MAGN
|
LSM303DLHC Three Axis Magnetometer |
CONFIG_LSM303DLHC_MAGN_ODR
|
Data rate frequency |
CONFIG_LSM303DLHC_MAGN_RANGE
|
Magnetometer measurement range |
CONFIG_LSM6DS0
|
LSM6DS0 I2C accelerometer and gyroscope Chip |
CONFIG_LSM6DS0_ACCEL_ENABLE_X_AXIS
|
Enable accelerometer X axis |
CONFIG_LSM6DS0_ACCEL_ENABLE_Y_AXIS
|
Enable accelerometer Y axis |
CONFIG_LSM6DS0_ACCEL_ENABLE_Z_AXIS
|
Enable accelerometer Z axis |
CONFIG_LSM6DS0_ACCEL_FULLSCALE
|
Accelerometer full-scale range |
CONFIG_LSM6DS0_ACCEL_SAMPLING_RATE
|
Output data rate |
CONFIG_LSM6DS0_ENABLE_TEMP
|
Enable temperature |
CONFIG_LSM6DS0_GYRO_ENABLE_X_AXIS
|
Enable gyroscope X axis |
CONFIG_LSM6DS0_GYRO_ENABLE_Y_AXIS
|
Enable gyroscope Y axis |
CONFIG_LSM6DS0_GYRO_ENABLE_Z_AXIS
|
Enable gyroscope Z axis |
CONFIG_LSM6DS0_GYRO_FULLSCALE
|
Gyroscope full-scale range |
CONFIG_LSM6DS0_GYRO_SAMPLING_RATE
|
Output data rate |
CONFIG_LSM6DSL
|
LSM6DSL I2C/SPI accelerometer and gyroscope Chip |
CONFIG_LSM6DSL_ACCEL_FS
|
Accelerometer full-scale range |
CONFIG_LSM6DSL_ACCEL_ODR
|
Accelerometer Output data rate frequency |
CONFIG_LSM6DSL_ENABLE_TEMP
|
Enable temperature |
CONFIG_LSM6DSL_EXT0_LIS2MDL
|
LIS2MDL |
CONFIG_LSM6DSL_EXT0_LPS22HB
|
LPS22HB |
CONFIG_LSM6DSL_GYRO_FS
|
Gyroscope full-scale range |
CONFIG_LSM6DSL_GYRO_ODR
|
Gyroscope Output data rate frequency |
CONFIG_LSM6DSL_SENSORHUB
|
Enable I2C sensorhub feature |
CONFIG_LSM6DSL_THREAD_PRIORITY
|
Thread priority |
CONFIG_LSM6DSL_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LSM6DSL_TRIGGER
|
|
CONFIG_LSM6DSL_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LSM6DSL_TRIGGER_NONE
|
No trigger |
CONFIG_LSM6DSL_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LSM6DSO
|
LSM6DSO I2C/SPI accelerometer and gyroscope Chip |
CONFIG_LSM6DSO_ACCEL_FS
|
Accelerometer full-scale range |
CONFIG_LSM6DSO_ACCEL_ODR
|
Accelerometer Output data rate frequency |
CONFIG_LSM6DSO_ENABLE_TEMP
|
Enable temperature |
CONFIG_LSM6DSO_EXT_HTS221
|
Enable HTS221 as external sensor |
CONFIG_LSM6DSO_EXT_LIS2MDL
|
Enable LIS2MDL as external sensor |
CONFIG_LSM6DSO_EXT_LPS22HB
|
Enable LPS22HB as external sensor |
CONFIG_LSM6DSO_EXT_LPS22HH
|
Enable LPS22HH as external sensor |
CONFIG_LSM6DSO_GYRO_FS
|
Gyroscope full-scale range |
CONFIG_LSM6DSO_GYRO_ODR
|
Gyroscope Output data rate frequency |
CONFIG_LSM6DSO_SENSORHUB
|
Enable I2C sensorhub feature |
CONFIG_LSM6DSO_THREAD_PRIORITY
|
Thread priority |
CONFIG_LSM6DSO_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LSM6DSO_TRIGGER
|
|
CONFIG_LSM6DSO_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_LSM6DSO_TRIGGER_NONE
|
No trigger |
CONFIG_LSM6DSO_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_LSM9DS0_GYRO
|
LSM9DS0 I2C gyroscope Chip |
CONFIG_LSM9DS0_GYRO_FULLSCALE_2000
|
2000 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_245
|
245 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_500
|
500 DPS |
CONFIG_LSM9DS0_GYRO_FULLSCALE_RUNTIME
|
Enable dynamic full-scale |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_190
|
190 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_380
|
380 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_760
|
760 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_95
|
95 Hz |
CONFIG_LSM9DS0_GYRO_SAMPLING_RATE_RUNTIME
|
Enable dynamic sampling rate |
CONFIG_LSM9DS0_GYRO_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_LSM9DS0_GYRO_TRIGGERS
|
Enable triggers |
CONFIG_LSM9DS0_GYRO_TRIGGER_DRDY
|
Enable data ready trigger |
CONFIG_LSM9DS0_MFD
|
LSM9DS0 I2C accelerometer, magnetometer and temperature sensor chip |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE
|
Enable accelerometer |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_X
|
Enable accelerometer X axis |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Y
|
Enable accelerometer Y axis |
CONFIG_LSM9DS0_MFD_ACCEL_ENABLE_Z
|
Enable accelerometer Z axis |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_16
|
16G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_2
|
2G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_4
|
4G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_6
|
6G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_8
|
8G |
CONFIG_LSM9DS0_MFD_ACCEL_FULL_SCALE_RUNTIME
|
Enable dynamic full-scale for accelerometer |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_0
|
0 Hz (power down) |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_100
|
100 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_12_5
|
12.5 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_1600
|
1600 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_200
|
200 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_25
|
25 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_3_125
|
3.125 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_400
|
400 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_50
|
50 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_6_25
|
6.25 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_800
|
800 Hz |
CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME
|
Enable dynamic sampling rate for accelerometer |
CONFIG_LSM9DS0_MFD_MAGN_ENABLE
|
Enable magnetometer |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_12
|
12 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_2
|
2 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_4
|
4 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_8
|
8 Gauss |
CONFIG_LSM9DS0_MFD_MAGN_FULL_SCALE_RUNTIME
|
Enable dynamic full-scale for magnetometer |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_100
|
100 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_12_5
|
12.5 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_25
|
25 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_3_125
|
3.125 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_50
|
50 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_6_25
|
6.25 Hz |
CONFIG_LSM9DS0_MFD_MAGN_SAMPLING_RATE_RUNTIME
|
Enable dynamic sampling rate for magnetometer |
CONFIG_LSM9DS0_MFD_TEMP_ENABLE
|
Enable temperature sensor |
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL
|
|
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_DBG
|
Debug |
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_ERR
|
Error |
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_INF
|
Info |
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_OFF
|
Off |
CONFIG_LTE_LINK_CONTROL_LOG_LEVEL_WRN
|
Warning |
CONFIG_LVGL
|
LittlevGL GUI library |
CONFIG_LVGL_ANTIALIAS
|
Enable anti-aliasing |
CONFIG_LVGL_BIDI_DIR_AUTO
|
Automatically detect direction |
CONFIG_LVGL_BIDI_DIR_LTR
|
Left-to-right |
CONFIG_LVGL_BIDI_DIR_RTL
|
Right-to-left |
CONFIG_LVGL_BITS_PER_PIXEL
|
Number of bits per pixel |
CONFIG_LVGL_BUFFER_ALLOC_DYNAMIC
|
Dynamic |
CONFIG_LVGL_BUFFER_ALLOC_STATIC
|
Static |
CONFIG_LVGL_CALENDAR_WEEK_STARTS_MONDAY
|
Calendar week starts on Monday |
CONFIG_LVGL_CHART_AXIS_TICK_LABEL_MAX_LEN
|
Maximum length of axis label |
CONFIG_LVGL_COLOR_16_SWAP
|
RGB565 byte swap |
CONFIG_LVGL_COLOR_DEPTH_1
|
1-bit |
CONFIG_LVGL_COLOR_DEPTH_16
|
16-bit |
CONFIG_LVGL_COLOR_DEPTH_32
|
32-bit |
CONFIG_LVGL_COLOR_DEPTH_8
|
8-bit |
CONFIG_LVGL_COLOR_SCREEN_TRANSP
|
Transparency support |
CONFIG_LVGL_COLOR_TRANSP_BLUE
|
Blue |
CONFIG_LVGL_COLOR_TRANSP_CUSTOM
|
Custom |
CONFIG_LVGL_COLOR_TRANSP_GREEN
|
Green |
CONFIG_LVGL_COLOR_TRANSP_RED
|
Red |
CONFIG_LVGL_CUSTOM_COLOR_TRANSP_BLUE
|
Chroma Key Blue |
CONFIG_LVGL_CUSTOM_COLOR_TRANSP_GREEN
|
Chroma Key Green |
CONFIG_LVGL_CUSTOM_COLOR_TRANSP_RED
|
Chroma Key Red |
CONFIG_LVGL_DISPLAY_DEV_NAME
|
Display device name |
CONFIG_LVGL_DISP_DEF_REFR_PERIOD
|
Screen refresh period |
CONFIG_LVGL_DISP_LARGE_LIMIT
|
Large display limit |
CONFIG_LVGL_DISP_MEDIUM_LIMIT
|
Medium display limit |
CONFIG_LVGL_DISP_SMALL_LIMIT
|
Small display limit |
CONFIG_LVGL_DOUBLE_VDB
|
Use two rendering buffers |
CONFIG_LVGL_DPI
|
Dots per inch |
CONFIG_LVGL_DROPDOWN_DEF_ANIM_TIME
|
Drop Down list animation time |
CONFIG_LVGL_EXT_CLICK_AREA_FULL
|
Full flexibility |
CONFIG_LVGL_EXT_CLICK_AREA_OFF
|
Disabled |
CONFIG_LVGL_EXT_CLICK_AREA_TINY
|
Only horizontally and vertical |
CONFIG_LVGL_FONT_DEJAVU_16_PERSIAN_HEBREW
|
Enable Dejavu 16px font with Hebrew, Arabic and Persian letters |
CONFIG_LVGL_FONT_MONTSERRAT_10
|
Enable Montserrat 10px font |
CONFIG_LVGL_FONT_MONTSERRAT_12
|
Enable Montserrat 12px font |
CONFIG_LVGL_FONT_MONTSERRAT_12_SUBPX
|
Enable Montserrat 12px font with sub-pixel rendering |
CONFIG_LVGL_FONT_MONTSERRAT_14
|
Enable Montserrat 14px font |
CONFIG_LVGL_FONT_MONTSERRAT_16
|
Enable Montserrat 16px font |
CONFIG_LVGL_FONT_MONTSERRAT_18
|
Enable Montserrat 18px font |
CONFIG_LVGL_FONT_MONTSERRAT_20
|
Enable Montserrat 20px font |
CONFIG_LVGL_FONT_MONTSERRAT_22
|
Enable Montserrat 22px font |
CONFIG_LVGL_FONT_MONTSERRAT_24
|
Enable Montserrat 24px font |
CONFIG_LVGL_FONT_MONTSERRAT_26
|
Enable Montserrat 26px font |
CONFIG_LVGL_FONT_MONTSERRAT_28
|
Enable Montserrat 28px font |
CONFIG_LVGL_FONT_MONTSERRAT_28_COMPRESSED
|
Enable Montserrat 28px compressed font |
CONFIG_LVGL_FONT_MONTSERRAT_30
|
Enable Montserrat 30px font |
CONFIG_LVGL_FONT_MONTSERRAT_32
|
Enable Montserrat 32px font |
CONFIG_LVGL_FONT_MONTSERRAT_34
|
Enable Montserrat 34px font |
CONFIG_LVGL_FONT_MONTSERRAT_36
|
Enable Montserrat 36px font |
CONFIG_LVGL_FONT_MONTSERRAT_38
|
Enable Montserrat 38px font |
CONFIG_LVGL_FONT_MONTSERRAT_40
|
Enable Montserrat 40px font |
CONFIG_LVGL_FONT_MONTSERRAT_42
|
Enable Montserrat 42px font |
CONFIG_LVGL_FONT_MONTSERRAT_44
|
Enable Montserrat 44px font |
CONFIG_LVGL_FONT_MONTSERRAT_46
|
Enable Montserrat 46px font |
CONFIG_LVGL_FONT_MONTSERRAT_48
|
Enable Montserrat 48px font |
CONFIG_LVGL_FONT_MONTSERRAT_8
|
Enable Montserrat 8px font |
CONFIG_LVGL_FONT_SIMSUN_16_CJK
|
Enable Simsun 16px font with CJK radicals |
CONFIG_LVGL_FONT_SUBPX_BGR
|
Use BGR instead RGB for sub-pixel rendering |
CONFIG_LVGL_FONT_UNSCII_8
|
Enable Unscii 8px monospace fonts |
CONFIG_LVGL_HOR_RES_MAX
|
Horizantal resolution |
CONFIG_LVGL_IMGBTN_TILED
|
Image button tile support |
CONFIG_LVGL_IMG_CACHE_DEF_SIZE
|
Default image cache size |
CONFIG_LVGL_IMG_CF_ALPHA
|
Enable alpha indexed image support |
CONFIG_LVGL_IMG_CF_INDEXED
|
Enable indexed image support |
CONFIG_LVGL_INDEV_DEF_DRAG_LIMIT
|
Drag Threshold |
CONFIG_LVGL_INDEV_DEF_DRAG_THROW
|
Drag throw slow-down |
CONFIG_LVGL_INDEV_DEF_GESTURE_LIMIT
|
Gesture threshold |
CONFIG_LVGL_INDEV_DEF_GESTURE_MIN_VELOCITY
|
Gesture minimum velocity |
CONFIG_LVGL_INDEV_DEF_LONG_PRESS_REP_TIME
|
Long press repeat time |
CONFIG_LVGL_INDEV_DEF_LONG_PRESS_TIME
|
Long press time |
CONFIG_LVGL_INDEV_DEF_READ_PERIOD
|
Input device refresh period |
CONFIG_LVGL_LABEL_DEF_SCROLL_SPEED
|
Label scroll speed |
CONFIG_LVGL_LABEL_LONG_TXT_HINT
|
Enable long text hint for labels |
CONFIG_LVGL_LABEL_TEXT_SEL
|
Enable label text selection |
CONFIG_LVGL_LABEL_WAIT_CHAR_COUNT
|
Waiting period for label animation |
CONFIG_LVGL_LED_BRIGHT_MAX
|
LED maximum brightness |
CONFIG_LVGL_LED_BRIGHT_MIN
|
LED minimum brightness |
CONFIG_LVGL_LINEMETER_PRECISE_BEST
|
Best precision |
CONFIG_LVGL_LINEMETER_PRECISE_NO_EXTRA
|
No extra precision |
CONFIG_LVGL_LINEMETER_PRECISE_SOME_EXTRA
|
Some extra precision |
CONFIG_LVGL_LIST_DEF_ANIM_TIME
|
List focus default animation time |
CONFIG_LVGL_LOG_LEVEL
|
|
CONFIG_LVGL_LOG_LEVEL_DBG
|
Debug |
CONFIG_LVGL_LOG_LEVEL_ERR
|
Error |
CONFIG_LVGL_LOG_LEVEL_INF
|
Info |
CONFIG_LVGL_LOG_LEVEL_OFF
|
Off |
CONFIG_LVGL_LOG_LEVEL_WRN
|
Warning |
CONFIG_LVGL_MEM_POOL_HEAP_KERNEL
|
Kernel Heap |
CONFIG_LVGL_MEM_POOL_HEAP_LIB_C
|
C library Heap |
CONFIG_LVGL_MEM_POOL_KERNEL
|
Kernel space lvgl pool |
CONFIG_LVGL_MEM_POOL_MAX_SIZE
|
Maximum memory pool block size |
CONFIG_LVGL_MEM_POOL_MIN_SIZE
|
Minimum memory pool block size |
CONFIG_LVGL_MEM_POOL_NUMBER_BLOCKS
|
Number of max size blocks in memory pool |
CONFIG_LVGL_MEM_POOL_USER
|
User space lvgl pool |
CONFIG_LVGL_PAGE_DEF_ANIM_TIME
|
Default page focus animation time |
CONFIG_LVGL_POINTER_KSCAN
|
Keyboard scan pointer input |
CONFIG_LVGL_POINTER_KSCAN_DEV_NAME
|
Keyboard scan device name for pointer input |
CONFIG_LVGL_POINTER_KSCAN_INVERT_X
|
Invert keyboard scan X axis |
CONFIG_LVGL_POINTER_KSCAN_INVERT_Y
|
Invert keyboard scan Y axis |
CONFIG_LVGL_POINTER_KSCAN_MSGQ_COUNT
|
Keyboard scan message queue count maximum |
CONFIG_LVGL_POINTER_KSCAN_SWAP_XY
|
Swap keyboard scan X,Y axes |
CONFIG_LVGL_ROLLER_DEF_ANIM_TIME
|
Roller animation time |
CONFIG_LVGL_ROLLER_INF_PAGES
|
Number of pages for infinite roller |
CONFIG_LVGL_SHADOW_CACHE_SIZE
|
Shadow cache size |
CONFIG_LVGL_SPINNER_DEF_ANIM_CONSTANT_ARC
|
Constant arc |
CONFIG_LVGL_SPINNER_DEF_ANIM_FILLSPIN_ARC
|
Fill spin arc |
CONFIG_LVGL_SPINNER_DEF_ANIM_SPINNING_ARC
|
Spinning arc |
CONFIG_LVGL_SPINNER_DEF_ARC_LENGTH
|
Default arc length |
CONFIG_LVGL_SPINNER_DEF_SPIN_TIME
|
Default spin time |
CONFIG_LVGL_TABLE_COL_MAX
|
Maximum number of table columns |
CONFIG_LVGL_TABVIEW_DEF_ANIM_TIME
|
Tab view animation time |
CONFIG_LVGL_TA_DEF_CURSOR_BLINK_TIME
|
Cursor Blink Time |
CONFIG_LVGL_TA_DEF_PWD_SHOW_TIME
|
Label scroll speed |
CONFIG_LVGL_THEME_CUSTOM_INIT_FUNCTION
|
Custom theme initialization function |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_AQUA
|
Aqua |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_BLACK
|
Black |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_BLUE
|
Blue |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_CUSTOM
|
Custom |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_CUSTOM_BLUE
|
Custom primary color (blue) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_CUSTOM_GREEN
|
Custom primary color (green) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_CUSTOM_RED
|
Custom primary color (red) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_CYAN
|
Cyan |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_GRAY
|
Gray |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_GREEN
|
Green |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_LIME
|
Lime |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_MAGENTA
|
Magenta |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_MAROON
|
Maroon |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_NAVY
|
Navy |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_OLIVE
|
Olive |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_ORANGE
|
Orange |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_PURPLE
|
Purple |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_RED
|
Red |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_SILVER
|
Silver |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_TEAL
|
Teal |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_WHITE
|
White |
CONFIG_LVGL_THEME_DEFAULT_COLOR_PRIMARY_YELLOW
|
Yellow |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_AQUA
|
Aqua |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_BLACK
|
Black |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_BLUE
|
Blue |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_CUSTOM
|
Custom |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_CUSTOM_BLUE
|
Custom secondary color (blue) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_CUSTOM_GREEN
|
Custom secondary color (green) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_CUSTOM_RED
|
Custom secondary color (red) |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_CYAN
|
Cyan |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_GRAY
|
Gray |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_GREEN
|
Green |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_LIME
|
Lime |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_MAGENTA
|
Magenta |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_MAROON
|
Maroon |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_NAVY
|
Navy |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_OLIVE
|
Olive |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_ORANGE
|
Orange |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_PURPLE
|
Purple |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_RED
|
Red |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_SILVER
|
Silver |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_TEAL
|
Teal |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_WHITE
|
White |
CONFIG_LVGL_THEME_DEFAULT_COLOR_SECONDARY_YELLOW
|
Yellow |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_CUSTOM
|
Custom font |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_DEJAVU_16_PERSIAN_HEBREW
|
Build-in font size 16 with Hebrew, Arabic and Persian |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_10
|
Build-in font size 10 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_12
|
Build-in font size 12 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_12_SUBPX
|
Build-in font size 12 with sub-pixel rendering |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_14
|
Build-in font size 14 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_16
|
Build-in font size 16 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_18
|
Build-in font size 18 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_20
|
Build-in font size 20 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_22
|
Build-in font size 22 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_24
|
Build-in font size 24 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_26
|
Build-in font size 26 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_28
|
Build-in font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_28_COMPRESSED
|
Build-in compressed font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_30
|
Build-in font size 30 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_32
|
Build-in font size 32 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_34
|
Build-in font size 34 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_36
|
Build-in font size 36 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_38
|
Build-in font size 38 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_40
|
Build-in font size 40 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_42
|
Build-in font size 42 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_44
|
Build-in font size 44 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_46
|
Build-in font size 46 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_48
|
Build-in font size 48 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_MONTSERRAT_8
|
Build-in font size 8 |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_SIMSUN_16_CJK
|
Build-in font size 16 with CJK radicals |
CONFIG_LVGL_THEME_DEFAULT_FONT_NORMAL_UNSCII_8
|
Build-in monospace font |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_CUSTOM
|
Custom font |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_DEJAVU_16_PERSIAN_HEBREW
|
Build-in font size 16 with Hebrew, Arabic and Persian |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_10
|
Build-in font size 10 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_12
|
Build-in font size 12 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_12_SUBPX
|
Build-in font size 12 with sub-pixel rendering |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_14
|
Build-in font size 14 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_16
|
Build-in font size 16 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_18
|
Build-in font size 18 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_20
|
Build-in font size 20 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_22
|
Build-in font size 22 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_24
|
Build-in font size 24 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_26
|
Build-in font size 26 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_28
|
Build-in font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_28_COMPRESSED
|
Build-in compressed font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_30
|
Build-in font size 30 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_32
|
Build-in font size 32 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_34
|
Build-in font size 34 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_36
|
Build-in font size 36 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_38
|
Build-in font size 38 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_40
|
Build-in font size 40 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_42
|
Build-in font size 42 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_44
|
Build-in font size 44 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_46
|
Build-in font size 46 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_48
|
Build-in font size 48 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_MONTSERRAT_8
|
Build-in font size 8 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_SIMSUN_16_CJK
|
Build-in font size 16 with CJK radicals |
CONFIG_LVGL_THEME_DEFAULT_FONT_SMALL_UNSCII_8
|
Build-in monospace font |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_CUSTOM
|
Custom font |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_DEJAVU_16_PERSIAN_HEBREW
|
Build-in font size 16 with Hebrew, Arabic and Persian |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_10
|
Build-in font size 10 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_12
|
Build-in font size 12 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_12_SUBPX
|
Build-in font size 12 with sub-pixel rendering |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_14
|
Build-in font size 14 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_16
|
Build-in font size 16 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_18
|
Build-in font size 18 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_20
|
Build-in font size 20 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_22
|
Build-in font size 22 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_24
|
Build-in font size 24 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_26
|
Build-in font size 26 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_28
|
Build-in font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_28_COMPRESSED
|
Build-in compressed font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_30
|
Build-in font size 30 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_32
|
Build-in font size 32 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_34
|
Build-in font size 34 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_36
|
Build-in font size 36 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_38
|
Build-in font size 38 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_40
|
Build-in font size 40 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_42
|
Build-in font size 42 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_44
|
Build-in font size 44 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_46
|
Build-in font size 46 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_48
|
Build-in font size 48 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_MONTSERRAT_8
|
Build-in font size 8 |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_SIMSUN_16_CJK
|
Build-in font size 16 with CJK radicals |
CONFIG_LVGL_THEME_DEFAULT_FONT_SUBTITLE_UNSCII_8
|
Build-in monospace font |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_CUSTOM
|
Custom font |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_DEJAVU_16_PERSIAN_HEBREW
|
Build-in font size 16 with Hebrew, Arabic and Persian |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_10
|
Build-in font size 10 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_12
|
Build-in font size 12 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_12_SUBPX
|
Build-in font size 12 with sub-pixel rendering |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_14
|
Build-in font size 14 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_16
|
Build-in font size 16 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_18
|
Build-in font size 18 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_20
|
Build-in font size 20 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_22
|
Build-in font size 22 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_24
|
Build-in font size 24 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_26
|
Build-in font size 26 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_28
|
Build-in font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_28_COMPRESSED
|
Build-in compressed font size 28 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_30
|
Build-in font size 30 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_32
|
Build-in font size 32 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_34
|
Build-in font size 34 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_36
|
Build-in font size 36 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_38
|
Build-in font size 38 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_40
|
Build-in font size 40 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_42
|
Build-in font size 42 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_44
|
Build-in font size 44 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_46
|
Build-in font size 46 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_48
|
Build-in font size 48 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_MONTSERRAT_8
|
Build-in font size 8 |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_SIMSUN_16_CJK
|
Build-in font size 16 with CJK radicals |
CONFIG_LVGL_THEME_DEFAULT_FONT_TITLE_UNSCII_8
|
Build-in monospace font |
CONFIG_LVGL_THEME_MATERIAL_DARK
|
Dark |
CONFIG_LVGL_THEME_MATERIAL_FLAG_NO_FOCUS
|
Disable focus |
CONFIG_LVGL_THEME_MATERIAL_FLAG_NO_TRANSITION
|
Disable transitions |
CONFIG_LVGL_THEME_MATERIAL_LIGHT
|
Light |
CONFIG_LVGL_TILEVIEW_DEF_ANIM_TIME
|
Tile view animation time |
CONFIG_LVGL_TXT_BREAK_CHARS
|
Text break characters |
CONFIG_LVGL_TXT_COLOR_CMD
|
Text recoloring control character |
CONFIG_LVGL_TXT_ENC_ASCII
|
ASCII string encoding |
CONFIG_LVGL_TXT_ENC_UTF8
|
UTF-8 string encoding |
CONFIG_LVGL_TXT_LINE_BREAK_LONG_LEN
|
Minimal word length for line break |
CONFIG_LVGL_TXT_LINE_BREAK_LONG_POST_MIN_LEN
|
Minimal number of characters on line after line break |
CONFIG_LVGL_TXT_LINE_BREAK_LONG_PRE_MIN_LEN
|
Minimal number of characters on line before line break |
CONFIG_LVGL_USE_ANIMATION
|
Enable animations |
CONFIG_LVGL_USE_API_EXTENSION_V6
|
Enable V6 API extensions |
CONFIG_LVGL_USE_API_EXTENSION_V7
|
Enable V7 API extensions |
CONFIG_LVGL_USE_ARABIC_PERSIAN_CHARS
|
Enable Arabic/Persian processing |
CONFIG_LVGL_USE_ARC
|
Arc Object |
CONFIG_LVGL_USE_ASSERT_MEM
|
Enable memory allocation assertion |
CONFIG_LVGL_USE_ASSERT_MEM_INTEGRITY
|
Enable memory integrity check |
CONFIG_LVGL_USE_ASSERT_NULL
|
Enable null pointer assertion |
CONFIG_LVGL_USE_ASSERT_OBJ
|
Enable object assertion |
CONFIG_LVGL_USE_ASSERT_STR
|
Enable string assertion |
CONFIG_LVGL_USE_ASSERT_STYLE
|
Enable style assertion |
CONFIG_LVGL_USE_BAR
|
Bar object |
CONFIG_LVGL_USE_BIDI
|
Enable bidirectional text support |
CONFIG_LVGL_USE_BLEND_MODES
|
Enable other blend modes |
CONFIG_LVGL_USE_BTN
|
Button object |
CONFIG_LVGL_USE_BTNMATRIX
|
Button Matrix object |
CONFIG_LVGL_USE_CALENDAR
|
Calendar object |
CONFIG_LVGL_USE_CANVAS
|
Canvas object |
CONFIG_LVGL_USE_CHART
|
Chart object |
CONFIG_LVGL_USE_CHECKBOX
|
Check box object |
CONFIG_LVGL_USE_CONT
|
Container Object |
CONFIG_LVGL_USE_CPICKER
|
Color picker object |
CONFIG_LVGL_USE_DEBUG
|
Enable debug support |
CONFIG_LVGL_USE_DROPDOWN
|
Drop Down List object |
CONFIG_LVGL_USE_FILESYSTEM
|
Enable file system |
CONFIG_LVGL_USE_FONT_COMPRESSED
|
Enable compressed font support |
CONFIG_LVGL_USE_FONT_SUBPX
|
Enable sub-pixel rendering |
CONFIG_LVGL_USE_GAUGE
|
Gauge object |
CONFIG_LVGL_USE_GPU
|
Enable GPU support |
CONFIG_LVGL_USE_GROUP
|
Enable group support |
CONFIG_LVGL_USE_IMG
|
Image Object |
CONFIG_LVGL_USE_IMGBTN
|
Image Button |
CONFIG_LVGL_USE_IMG_TRANSFORM
|
Enable image transformations |
CONFIG_LVGL_USE_KEYBOARD
|
Keyboard object |
CONFIG_LVGL_USE_LABEL
|
Label Object |
CONFIG_LVGL_USE_LED
|
LED object |
CONFIG_LVGL_USE_LINE
|
Line Object |
CONFIG_LVGL_USE_LINEMETER
|
Line meter object |
CONFIG_LVGL_USE_LIST
|
List object |
CONFIG_LVGL_USE_MSGBOX
|
Message box object |
CONFIG_LVGL_USE_OBJMASK
|
Mask object |
CONFIG_LVGL_USE_OBJ_REALIGN
|
Object realign support |
CONFIG_LVGL_USE_OPA_SCALE
|
Enable opa_scale style property |
CONFIG_LVGL_USE_OUTLINE
|
Enable outline drawing on rectangles |
CONFIG_LVGL_USE_PAGE
|
Page object |
CONFIG_LVGL_USE_PATTERN
|
Enable pattern drawing on rectangles |
CONFIG_LVGL_USE_PERF_MONITOR
|
Enable performance monitor |
CONFIG_LVGL_USE_ROLLER
|
Roller object |
CONFIG_LVGL_USE_SHADOW
|
Enable shadows |
CONFIG_LVGL_USE_SLIDER
|
Slider object |
CONFIG_LVGL_USE_SPINBOX
|
Spinbox object |
CONFIG_LVGL_USE_SPINNER
|
Spinner object |
CONFIG_LVGL_USE_SWITCH
|
Switch object |
CONFIG_LVGL_USE_TABLE
|
Table object |
CONFIG_LVGL_USE_TABVIEW
|
Tab view object |
CONFIG_LVGL_USE_TEXTAREA
|
Text area object |
CONFIG_LVGL_USE_THEME_CUSTOM
|
Custom theme |
CONFIG_LVGL_USE_THEME_EMPTY
|
Empty theme |
CONFIG_LVGL_USE_THEME_MATERIAL
|
Material theme |
CONFIG_LVGL_USE_THEME_MONO
|
Mono theme |
CONFIG_LVGL_USE_TILEVIEW
|
Tile view object |
CONFIG_LVGL_USE_VALUE_STR
|
Enable value string drawing on rectangles |
CONFIG_LVGL_USE_WIN
|
Window object |
CONFIG_LVGL_VDB_SIZE
|
Display buffer percentage |
CONFIG_LVGL_VER_RES_MAX
|
Vertical resolution |
CONFIG_LWM2M
|
OMA LWM2M protocol stack |
CONFIG_LWM2M_CANCEL_OBSERVE_BY_PATH
|
Use path matching as fallback for cancel-observe |
CONFIG_LWM2M_CARRIER_LOG_LEVEL
|
|
CONFIG_LWM2M_CARRIER_LOG_LEVEL_DBG
|
Debug |
CONFIG_LWM2M_CARRIER_LOG_LEVEL_ERR
|
Error |
CONFIG_LWM2M_CARRIER_LOG_LEVEL_INF
|
Info |
CONFIG_LWM2M_CARRIER_LOG_LEVEL_OFF
|
Off |
CONFIG_LWM2M_CARRIER_LOG_LEVEL_WRN
|
Warning |
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL
|
|
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL_DBG
|
Debug |
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL_ERR
|
Error |
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL_INF
|
Info |
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL_OFF
|
Off |
CONFIG_LWM2M_CLIENT_UTILS_LOG_LEVEL_WRN
|
Warning |
CONFIG_LWM2M_COAP_BLOCK_SIZE
|
LWM2M CoAP block-wise transfer size |
CONFIG_LWM2M_CONN_MON_APN_MAX
|
Maximum # of APN resource instances |
CONFIG_LWM2M_CONN_MON_BEARER_MAX
|
Max number of bearers |
CONFIG_LWM2M_CONN_MON_OBJ_SUPPORT
|
Connectivity Monitoring object support |
CONFIG_LWM2M_DEVICE_ERROR_CODE_MAX
|
Maximum # of device obj error codes to store |
CONFIG_LWM2M_DEVICE_EXT_DEV_INFO_MAX
|
Maximum # of device obj external device info to store |
CONFIG_LWM2M_DEVICE_PWRSRC_MAX
|
Maximum # of device power source records |
CONFIG_LWM2M_DNS_SUPPORT
|
Enable DNS support in the LWM2M client |
CONFIG_LWM2M_DTLS_SUPPORT
|
Enable DTLS support in the LwM2M client |
CONFIG_LWM2M_ENGINE_DEFAULT_LIFETIME
|
LWM2M engine default server connection lifetime |
CONFIG_LWM2M_ENGINE_MAX_MESSAGES
|
LWM2M engine max. message object |
CONFIG_LWM2M_ENGINE_MAX_OBSERVER
|
Maximum # of observable LWM2M resources |
CONFIG_LWM2M_ENGINE_MAX_PENDING
|
LWM2M engine max. pending objects |
CONFIG_LWM2M_ENGINE_MAX_REPLIES
|
LWM2M engine max. reply objects |
CONFIG_LWM2M_ENGINE_MESSAGE_HEADER_SIZE
|
Room for CoAP header data |
CONFIG_LWM2M_ENGINE_STACK_SIZE
|
LWM2M engine stack size |
CONFIG_LWM2M_ENGINE_VALIDATION_BUFFER_SIZE
|
Size of the validation buffer for the incoming data |
CONFIG_LWM2M_FIRMWARE_UPDATE_OBJ_SUPPORT
|
Firmware Update object support |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR
|
CoAP proxy network address |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT
|
Firmware Update object pull via CoAP-CoAP/HTTP proxy support |
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_SUPPORT
|
Firmware Update object pull support |
CONFIG_LWM2M_IPSO_ACCELEROMETER
|
IPSO Accelerometer Support |
CONFIG_LWM2M_IPSO_ACCELEROMETER_INSTANCE_COUNT
|
Maximum # of IPSO Accelerometer object instances |
CONFIG_LWM2M_IPSO_ACCELEROMETER_VERSION_1_0
|
IPSO Accelerometer object version 1.0 |
CONFIG_LWM2M_IPSO_ACCELEROMETER_VERSION_1_1
|
IPSO Accelerometer object version 1.1 |
CONFIG_LWM2M_IPSO_BUZZER
|
IPSO Buzzer Support |
CONFIG_LWM2M_IPSO_BUZZER_INSTANCE_COUNT
|
Maximum # of IPSO Buzzer instances |
CONFIG_LWM2M_IPSO_BUZZER_VERSION_1_0
|
IPSO Buzzer object version 1.0 |
CONFIG_LWM2M_IPSO_BUZZER_VERSION_1_1
|
IPSO Buzzer object version 1.1 |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR
|
IPSO Generic Sensor Support |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR_INSTANCE_COUNT
|
Maximum # of IPSO Generic Sensor object instances |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR_NAME
|
Name that will show up in debug output when object is created |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR_TYPE
|
Sensor type |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR_VERSION_1_0
|
IPSO Generic Sensor object version 1.0 |
CONFIG_LWM2M_IPSO_GENERIC_SENSOR_VERSION_1_1
|
IPSO Generic Sensor object version 1.1 |
CONFIG_LWM2M_IPSO_HUMIDITY_SENSOR
|
IPSO Humidity Sensor Support |
CONFIG_LWM2M_IPSO_HUMIDITY_SENSOR_INSTANCE_COUNT
|
Maximum # of IPSO Humidity Sensor object instances |
CONFIG_LWM2M_IPSO_HUMIDITY_SENSOR_VERSION_1_0
|
IPSO Humidity Sensor object version 1.0 |
CONFIG_LWM2M_IPSO_HUMIDITY_SENSOR_VERSION_1_1
|
IPSO Humidity Sensor object version 1.1 |
CONFIG_LWM2M_IPSO_LIGHT_CONTROL
|
IPSO Light Control Support |
CONFIG_LWM2M_IPSO_LIGHT_CONTROL_INSTANCE_COUNT
|
Maximum # of IPSO Light Control object instances |
CONFIG_LWM2M_IPSO_ONOFF_SWITCH
|
IPSO On/Off Switch Support |
CONFIG_LWM2M_IPSO_ONOFF_SWITCH_INSTANCE_COUNT
|
Maximum # of IPSO On/Off Switch object instances |
CONFIG_LWM2M_IPSO_ONOFF_SWITCH_VERSION_1_0
|
IPSO On/Off Switch object version 1.0 |
CONFIG_LWM2M_IPSO_ONOFF_SWITCH_VERSION_1_1
|
IPSO On/Off Switch object version 1.1 |
CONFIG_LWM2M_IPSO_PRESSURE_SENSOR
|
IPSO Pressure Sensor Support |
CONFIG_LWM2M_IPSO_PRESSURE_SENSOR_INSTANCE_COUNT
|
Maximum # of IPSO Pressure Sensor object instances |
CONFIG_LWM2M_IPSO_PRESSURE_SENSOR_VERSION_1_0
|
IPSO Pressure Sensor object version 1.0 |
CONFIG_LWM2M_IPSO_PRESSURE_SENSOR_VERSION_1_1
|
IPSO Pressure Sensor object version 1.1 |
CONFIG_LWM2M_IPSO_PUSH_BUTTON
|
IPSO Push Button Support |
CONFIG_LWM2M_IPSO_PUSH_BUTTON_INSTANCE_COUNT
|
Maximum # of IPSO On/Off Switch object instances |
CONFIG_LWM2M_IPSO_PUSH_BUTTON_VERSION_1_0
|
IPSO Push Button object version 1.0 |
CONFIG_LWM2M_IPSO_PUSH_BUTTON_VERSION_1_1
|
IPSO Push Button object version 1.1 |
CONFIG_LWM2M_IPSO_SUPPORT
|
IPSO Alliance Smart Object Support |
CONFIG_LWM2M_IPSO_TEMP_SENSOR
|
IPSO Temperature Sensor Support |
CONFIG_LWM2M_IPSO_TEMP_SENSOR_INSTANCE_COUNT
|
Maximum # of IPSO Temperature Sensor object instances |
CONFIG_LWM2M_IPSO_TEMP_SENSOR_VERSION_1_0
|
IPSO Temperature object version 1.0 |
CONFIG_LWM2M_IPSO_TEMP_SENSOR_VERSION_1_1
|
IPSO Temperature object version 1.1 |
CONFIG_LWM2M_IPSO_TIMER
|
IPSO Light Control Support |
CONFIG_LWM2M_IPSO_TIMER_INSTANCE_COUNT
|
Maximum # of IPSO Timer object instances |
CONFIG_LWM2M_LOCATION_OBJ_SUPPORT
|
Location object support |
CONFIG_LWM2M_LOG_LEVEL
|
|
CONFIG_LWM2M_LOG_LEVEL_DBG
|
Debug |
CONFIG_LWM2M_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_LWM2M_LOG_LEVEL_ERR
|
Error |
CONFIG_LWM2M_LOG_LEVEL_INF
|
Info |
CONFIG_LWM2M_LOG_LEVEL_OFF
|
Off |
CONFIG_LWM2M_LOG_LEVEL_WRN
|
Warning |
CONFIG_LWM2M_NUM_ATTR
|
Maximum # of LWM2M attributes |
CONFIG_LWM2M_NUM_BLOCK1_CONTEXT
|
Maximum # of LWM2M block1 contexts |
CONFIG_LWM2M_PEER_PORT
|
LWM2M server port |
CONFIG_LWM2M_QUEUE_MODE_ENABLED
|
Enable Queue Mode UDP binding |
CONFIG_LWM2M_QUEUE_MODE_UPTIME
|
Specify time the LWM2M client should stay online in queue mode. |
CONFIG_LWM2M_RD_CLIENT_ENDPOINT_NAME_MAX_LENGTH
|
Maximum length of client endpoint name |
CONFIG_LWM2M_RD_CLIENT_MAX_RETRIES
|
Specify maximum number of registration retries |
CONFIG_LWM2M_RD_CLIENT_SUPPORT
|
support for LWM2M client bootstrap/registration state machine |
CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
|
Enable bootstrap support |
CONFIG_LWM2M_RW_JSON_SUPPORT
|
support for JSON writer |
CONFIG_LWM2M_SECONDS_TO_UPDATE_EARLY
|
LWM2M Registration Update transmission time before timeout |
CONFIG_LWM2M_SECURITY_INSTANCE_COUNT
|
Maximum # of LWM2M Security object instances |
CONFIG_LWM2M_SECURITY_KEY_SIZE
|
Buffer size of the security key resources |
CONFIG_LWM2M_SERVER_DEFAULT_PMAX
|
Default server record PMAX |
CONFIG_LWM2M_SERVER_DEFAULT_PMIN
|
Default server record PMIN |
CONFIG_LWM2M_SERVER_INSTANCE_COUNT
|
Maximum # of LWM2M Server object instances |
CONFIG_LZ4
|
Enable lz4 data compression and decompression |
CONFIG_MAIN_STACK_SIZE
|
Size of stack for initialization and main thread |
CONFIG_MAIN_THREAD_PRIORITY
|
Priority of initialization/main thread |
CONFIG_MAKEFILE_EXPORTS
|
Generate build metadata files named Makefile.exports |
CONFIG_MASS_STORAGE_BULK_EP_MPS
|
|
CONFIG_MASS_STORAGE_DISK_NAME
|
Mass storage disk or drive name |
CONFIG_MASS_STORAGE_INQ_PRODUCT_ID
|
Product ID for inquiry (must be 16 characters) |
CONFIG_MASS_STORAGE_INQ_REVISION
|
Revision for inquiry (must be 4 characters) |
CONFIG_MASS_STORAGE_INQ_VENDOR_ID
|
T10 assigned vendor ID for inquiry (must be 8 characters) |
CONFIG_MASS_STORAGE_STACK_SIZE
|
Set stack size for mass storage thread |
CONFIG_MAX17055
|
MAX17055 Fuel Gauge |
CONFIG_MAX17262
|
MAX17262 Fuel Gauge |
CONFIG_MAX30101
|
MAX30101 Pulse Oximeter and Heart Rate Sensor |
CONFIG_MAX30101_ADC_RGE
|
ADC range control |
CONFIG_MAX30101_FIFO_A_FULL
|
FIFO almost full value |
CONFIG_MAX30101_FIFO_ROLLOVER_EN
|
FIFO rolls on full |
CONFIG_MAX30101_HEART_RATE_MODE
|
Heart rate mode |
CONFIG_MAX30101_LED1_PA
|
LED1 (red) pulse amplitude |
CONFIG_MAX30101_LED2_PA
|
LED2 (IR) pulse amplitude |
CONFIG_MAX30101_LED3_PA
|
LED2 (green) pulse amplitude |
CONFIG_MAX30101_MULTI_LED_MODE
|
Multi-LED mode |
CONFIG_MAX30101_SLOT1
|
Slot 1 |
CONFIG_MAX30101_SLOT2
|
Slot 2 |
CONFIG_MAX30101_SLOT3
|
Slot 3 |
CONFIG_MAX30101_SLOT4
|
Slot 4 |
CONFIG_MAX30101_SMP_AVE
|
Sample averaging |
CONFIG_MAX30101_SPO2_MODE
|
SpO2 mode |
CONFIG_MAX30101_SR
|
ADC sample rate control |
CONFIG_MAX44009
|
MAX44009 Light Sensor |
CONFIG_MAX6675
|
MAX6675 K-thermocouple to digital converter |
CONFIG_MAX_DOMAIN_PARTITIONS
|
Maximum number of partitions per memory domain |
CONFIG_MAX_IRQ_LINES
|
Number of IRQ lines |
CONFIG_MAX_IRQ_PER_AGGREGATOR
|
Max IRQs per interrupt aggregator |
CONFIG_MAX_PTHREAD_COUNT
|
Maximum simultaneously active pthread count in POSIX application |
CONFIG_MAX_THREAD_BYTES
|
Bytes to use when tracking object thread permissions |
CONFIG_MAX_TIMER_COUNT
|
Maximum timer count in POSIX application |
CONFIG_MAX_XLAT_TABLES
|
Maximum numbers of translation tables |
CONFIG_MBEDTLS
|
mbed TLS Support |
CONFIG_MBEDTLS_AES_ROM_TABLES
|
Use precomputed AES tables stored in ROM. |
CONFIG_MBEDTLS_BUILTIN
|
Use Zephyr in-tree mbedTLS version |
CONFIG_MBEDTLS_CFG_FILE
|
Use built-in Mbed TLS with configuration file |
CONFIG_MBEDTLS_CHACHAPOLY_AEAD_ENABLED
|
Enable the ChaCha20-Poly1305 AEAD algorithm |
CONFIG_MBEDTLS_CIPHER
|
Enable the generic cipher layer. |
CONFIG_MBEDTLS_CIPHER_AES_ENABLED
|
Enable the AES block cipher |
CONFIG_MBEDTLS_CIPHER_ALL_ENABLED
|
Enable all available ciphers |
CONFIG_MBEDTLS_CIPHER_ARC4_ENABLED
|
Enable the ARC4 stream cipher |
CONFIG_MBEDTLS_CIPHER_BLOWFISH_ENABLED
|
Enable the Blowfish block cipher |
CONFIG_MBEDTLS_CIPHER_CAMELLIA_ENABLED
|
Enable the Camellia block cipher |
CONFIG_MBEDTLS_CIPHER_CCM_ENABLED
|
Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher |
CONFIG_MBEDTLS_CIPHER_CHACHA20_ENABLED
|
Enable the ChaCha20 stream cipher |
CONFIG_MBEDTLS_CIPHER_DES_ENABLED
|
Enable the DES block cipher |
CONFIG_MBEDTLS_CIPHER_GCM_ENABLED
|
Enable the Galois/Counter Mode (GCM) for AES |
CONFIG_MBEDTLS_CIPHER_MODE_CBC_ENABLED
|
Enable Cipher Block Chaining mode (CBC) for symmetric ciphers |
CONFIG_MBEDTLS_CIPHER_MODE_CTR_ENABLED
|
Enable Counter Block Cipher mode (CTR) for symmetric ciphers. |
CONFIG_MBEDTLS_CIPHER_MODE_XTS_ENABLED
|
Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES |
CONFIG_MBEDTLS_CTR_DRBG_ENABLED
|
Enable the CTR_DRBG AES-256-based random generator |
CONFIG_MBEDTLS_DEBUG
|
mbed TLS debug activation |
CONFIG_MBEDTLS_DEBUG_LEVEL
|
mbed TLS default debug level |
CONFIG_MBEDTLS_DTLS
|
Enable support for DTLS |
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC
|
Enable deterministic ECDSA (RFC 6979) |
CONFIG_MBEDTLS_ECP_ALL_ENABLED
|
Enable all available elliptic curves |
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED
|
Enable BP256R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED
|
Enable BP384R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED
|
Enable BP512R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED
|
Enable CURVE25519 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_CURVE448_ENABLED
|
Enable CURVE448 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED
|
Enable SECP192K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED
|
Enable SECP192R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED
|
Enable SECP224K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED
|
Enable SECP224R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED
|
Enable SECP256K1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED
|
Enable SECP256R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED
|
Enable SECP384R1 elliptic curve |
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED
|
Enable SECP521R1 elliptic curve |
CONFIG_MBEDTLS_ECP_NIST_OPTIM
|
Enable NSIT curves optimization |
CONFIG_MBEDTLS_ENABLE_HEAP
|
Enable global heap for mbed TLS |
CONFIG_MBEDTLS_ENTROPY_ENABLED
|
Enable mbedTLS generic entropy pool |
CONFIG_MBEDTLS_GENPRIME_ENABLED
|
Enable the prime-number generation code. |
CONFIG_MBEDTLS_HAVE_ASM
|
Enable use of assembly code |
CONFIG_MBEDTLS_HAVE_TIME_DATE
|
Enable date/time validation in mbed TLS |
CONFIG_MBEDTLS_HEAP_SIZE
|
Heap size for mbed TLS |
CONFIG_MBEDTLS_HMAC_DRBG_ENABLED
|
Enable the HMAC_DRBG random generator |
CONFIG_MBEDTLS_INSTALL_PATH
|
mbedTLS install path |
CONFIG_MBEDTLS_KEY_EXCHANGE_ALL_ENABLED
|
Enable all available ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
|
Enable the DHE-PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
|
Enable the DHE-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|
Enable the ECDHE-ECDSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
|
Enable the ECDHE-PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
|
Enable the ECDHE-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
|
Enable the ECDH-ECDSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
|
Enable the ECDH-RSA based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
|
Enable the ECJPAKE based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
|
Enable the PSK based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
|
Enable the RSA-only based ciphersuite modes |
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
|
Enable the RSA-PSK based ciphersuite modes |
CONFIG_MBEDTLS_LIBRARY
|
Use external mbedTLS library |
CONFIG_MBEDTLS_MAC_ALL_ENABLED
|
Enable all available MAC methods |
CONFIG_MBEDTLS_MAC_CMAC_ENABLED
|
Enable the CMAC (Cipher-based Message Authentication Code) mode for block ciphers. |
CONFIG_MBEDTLS_MAC_MD4_ENABLED
|
Enable the MD4 hash algorithm |
CONFIG_MBEDTLS_MAC_MD5_ENABLED
|
Enable the MD5 hash algorithm |
CONFIG_MBEDTLS_MAC_POLY1305_ENABLED
|
Enable the Poly1305 MAC algorithm |
CONFIG_MBEDTLS_MAC_SHA1_ENABLED
|
Enable the SHA1 hash algorithm |
CONFIG_MBEDTLS_MAC_SHA256_ENABLED
|
Enable the SHA-224 and SHA-256 hash algorithms |
CONFIG_MBEDTLS_MAC_SHA512_ENABLED
|
Enable the SHA-384 and SHA-512 hash algorithms |
CONFIG_MBEDTLS_MD
|
Enable the generic message digest layer. |
CONFIG_MBEDTLS_MEMORY_DEBUG
|
mbed TLS memory debug activation |
CONFIG_MBEDTLS_OPENTHREAD_OPTIMIZATIONS_ENABLED
|
Enable mbedTLS optimizations for OpenThread |
CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT
|
Enable support for PEM certificate format |
CONFIG_MBEDTLS_PK_WRITE_C
|
Enable the generic public (asymetric) key writer |
CONFIG_MBEDTLS_PROMPTLESS
|
|
CONFIG_MBEDTLS_SERVER_NAME_INDICATION
|
Enable support for RFC 6066 server name indication (SNI) in SSL |
CONFIG_MBEDTLS_SHA256_SMALLER
|
Enable smaller SHA-256 implementation |
CONFIG_MBEDTLS_SHELL
|
mbed TLS shell |
CONFIG_MBEDTLS_SSL_ALPN
|
Enable support for setting the supported Application Layer Protocols |
CONFIG_MBEDTLS_SSL_EXPORT_KEYS
|
Enable support for exporting SSL key block and master secret |
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN
|
Max payload size for TLS protocol message |
CONFIG_MBEDTLS_TEST
|
Compile internal self test functions |
CONFIG_MBEDTLS_TLS_VERSION_1_0
|
Enable support for TLS 1.0 |
CONFIG_MBEDTLS_TLS_VERSION_1_1
|
Enable support for TLS 1.1 (DTLS 1.0) |
CONFIG_MBEDTLS_TLS_VERSION_1_2
|
Enable support for TLS 1.2 (DTLS 1.2) |
CONFIG_MBEDTLS_USER_CONFIG_ENABLE
|
Enable user mbedTLS config file |
CONFIG_MBEDTLS_USER_CONFIG_FILE
|
User configuration file for mbed TLS |
CONFIG_MCG_FCRDIV
|
Fast internal reference clock divider |
CONFIG_MCG_FRDIV
|
FLL external reference divider |
CONFIG_MCG_PRDIV0
|
PLL external reference divider |
CONFIG_MCG_VDIV0
|
VCO 0 divider |
CONFIG_MCHP_ECIA_XEC
|
External EC Interrupt Aggregator (ECIA) Driver for MCHP MEC family of MCUs |
CONFIG_MCHP_XEC_RTOS_TIMER
|
Microchip XEC series RTOS timer |
CONFIG_MCP9808
|
MCP9808 temperature sensor |
CONFIG_MCP9808_THREAD_PRIORITY
|
MCP9808 thread priority |
CONFIG_MCP9808_THREAD_STACK_SIZE
|
Sensor delayed work thread stack size |
CONFIG_MCP9808_TRIGGER
|
|
CONFIG_MCP9808_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_MCP9808_TRIGGER_NONE
|
No trigger |
CONFIG_MCP9808_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_MCR20A_CLK_OUT_16MHZ
|
16 MHz |
CONFIG_MCR20A_CLK_OUT_1MHZ
|
1 MHz |
CONFIG_MCR20A_CLK_OUT_250KHZ
|
250 kHz |
CONFIG_MCR20A_CLK_OUT_32768HZ
|
32768 Hz |
CONFIG_MCR20A_CLK_OUT_32MHZ
|
32 MHz |
CONFIG_MCR20A_CLK_OUT_4MHZ
|
4 MHz |
CONFIG_MCR20A_CLK_OUT_62500HZ
|
62500 Hz |
CONFIG_MCR20A_CLK_OUT_8MHZ
|
8 MHz |
CONFIG_MCR20A_CLK_OUT_DISABLED
|
Disabled |
CONFIG_MCR20A_IS_PART_OF_KW2XD_SIP
|
MCR20A device is part of KW2xD SiP |
CONFIG_MCUBOOT
|
|
CONFIG_MCUBOOT_BOOTUTIL_LIB
|
MCUboot utility library |
CONFIG_MCUBOOT_BOOTUTIL_LIB_OWN_LOG
|
|
CONFIG_MCUBOOT_EXTRA_IMGTOOL_ARGS
|
Extra arguments to pass to imgtool |
CONFIG_MCUBOOT_GENERATE_CONFIRMED_IMAGE
|
Also generate a padded, confirmed image |
CONFIG_MCUBOOT_IMG_MANAGER
|
Image manager for mcuboot |
CONFIG_MCUBOOT_SHELL
|
MCUboot shell |
CONFIG_MCUBOOT_SIGNATURE_KEY_FILE
|
Path to the mcuboot signing key file |
CONFIG_MCUBOOT_TRAILER_SWAP_TYPE
|
use trailer’s swap_type field |
CONFIG_MCUBOOT_UTIL_LOG_LEVEL
|
|
CONFIG_MCUBOOT_UTIL_LOG_LEVEL_DBG
|
Debug |
CONFIG_MCUBOOT_UTIL_LOG_LEVEL_ERR
|
Error |
CONFIG_MCUBOOT_UTIL_LOG_LEVEL_INF
|
Info |
CONFIG_MCUBOOT_UTIL_LOG_LEVEL_OFF
|
Off |
CONFIG_MCUBOOT_UTIL_LOG_LEVEL_WRN
|
Warning |
CONFIG_MCUMGR
|
mcumgr Support |
CONFIG_MCUMGR_BUF_COUNT
|
Number of mcumgr buffers |
CONFIG_MCUMGR_BUF_SIZE
|
Size of each mcumgr buffer |
CONFIG_MCUMGR_BUF_USER_DATA_SIZE
|
Size of mcumgr buffer user data |
CONFIG_MCUMGR_CMD_FS_MGMT
|
Enable mcumgr handlers for file management (insecure) |
CONFIG_MCUMGR_CMD_IMG_MGMT
|
Enable mcumgr handlers for image management |
CONFIG_MCUMGR_CMD_OS_MGMT
|
Enable mcumgr handlers for OS management |
CONFIG_MCUMGR_CMD_SHELL_MGMT
|
Enable mcumgr handlers for shell management |
CONFIG_MCUMGR_CMD_STAT_MGMT
|
Enable mcumgr handlers for statistics management |
CONFIG_MCUMGR_GRP_BASIC_CMD_STORAGE_ERASE
|
Enables storage erase command |
CONFIG_MCUMGR_GRP_ZEPHYR_BASIC
|
Enable Zephyr specific basic group of commands |
CONFIG_MCUMGR_LOG_LEVEL
|
|
CONFIG_MCUMGR_LOG_LEVEL_DBG
|
Debug |
CONFIG_MCUMGR_LOG_LEVEL_ERR
|
Error |
CONFIG_MCUMGR_LOG_LEVEL_INF
|
Info |
CONFIG_MCUMGR_LOG_LEVEL_OFF
|
Off |
CONFIG_MCUMGR_LOG_LEVEL_WRN
|
Warning |
CONFIG_MCUMGR_SMP_BT
|
Bluetooth mcumgr SMP transport |
CONFIG_MCUMGR_SMP_BT_AUTHEN
|
Authenticated requirement for Bluetooth mcumgr SMP transport |
CONFIG_MCUMGR_SMP_SHELL
|
Shell mcumgr SMP transport |
CONFIG_MCUMGR_SMP_SHELL_MTU
|
Shell SMP MTU |
CONFIG_MCUMGR_SMP_SHELL_RX_BUF_COUNT
|
Shell SMP RX buffer count |
CONFIG_MCUMGR_SMP_UART
|
UART mcumgr SMP transport |
CONFIG_MCUMGR_SMP_UART_MTU
|
UART SMP MTU |
CONFIG_MCUMGR_SMP_UDP
|
UDP mcumgr SMP transport |
CONFIG_MCUMGR_SMP_UDP_IPV4
|
UDP SMP using IPv4 |
CONFIG_MCUMGR_SMP_UDP_IPV6
|
UDP SMP using IPv6 |
CONFIG_MCUMGR_SMP_UDP_MTU
|
UDP SMP MTU |
CONFIG_MCUMGR_SMP_UDP_PORT
|
UDP SMP port |
CONFIG_MCUMGR_SMP_UDP_STACK_SIZE
|
UDP SMP stack size |
CONFIG_MCUMGR_SMP_UDP_THREAD_PRIO
|
UDP SMP thread priority |
CONFIG_MCUX_ACMP
|
NXP MCUX Analog Comparator (ACMP) |
CONFIG_MCUX_ACMP_TRIGGER
|
Trigger support |
CONFIG_MCUX_ELCDIF_PANEL_RK043FN02H
|
Rocktech rk043fn02h-ct |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_ALIGN
|
Alignment of memory pool blocks |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MAX
|
Maximum memory pool block size |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_MIN
|
Minimum memory pool block size |
CONFIG_MCUX_ELCDIF_POOL_BLOCK_NUM
|
Number of memory pool blocks |
CONFIG_MCUX_LPTMR_TIMER
|
MCUX LPTMR timer |
CONFIG_MCUX_OS_TIMER
|
MCUX OS Event timer |
CONFIG_MDNS_RESOLVER
|
Enable mDNS support |
CONFIG_MDNS_RESOLVER_ADDITIONAL_BUF_CTR
|
Additional DNS buffers |
CONFIG_MDNS_RESPONDER
|
mDNS responder |
CONFIG_MDNS_RESPONDER_DNS_SD
|
Enable DNS Service Discovery via mDNS |
CONFIG_MDNS_RESPONDER_INIT_PRIO
|
Startup priority for the mDNS responder init |
CONFIG_MDNS_RESPONDER_LOG_LEVEL
|
|
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DBG
|
Debug |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_ERR
|
Error |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_INF
|
Info |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_OFF
|
Off |
CONFIG_MDNS_RESPONDER_LOG_LEVEL_WRN
|
Warning |
CONFIG_MDNS_RESPONDER_TTL
|
Time-to-Live of returned DNS name |
CONFIG_MEMC
|
Memory controllers [EXPERIMENTAL] |
CONFIG_MEMC_INIT_PRIORITY
|
Initialization priority |
CONFIG_MEMC_LOG_LEVEL
|
|
CONFIG_MEMC_LOG_LEVEL_DBG
|
Debug |
CONFIG_MEMC_LOG_LEVEL_ERR
|
Error |
CONFIG_MEMC_LOG_LEVEL_INF
|
Info |
CONFIG_MEMC_LOG_LEVEL_OFF
|
Off |
CONFIG_MEMC_LOG_LEVEL_WRN
|
Warning |
CONFIG_MEMC_MCUX_FLEXSPI
|
|
CONFIG_MEMC_MCUX_FLEXSPI_HYPERRAM
|
MCUX FlexSPI HyperRAM driver |
CONFIG_MEMC_STM32
|
Enable STM32 Flexible Memory Controller (FMC) |
CONFIG_MEMC_STM32_SDRAM
|
Enable STM32 FMC SDRAM controller |
CONFIG_MEMFAULT_NCS_LOG_LEVEL
|
|
CONFIG_MEMFAULT_NCS_LOG_LEVEL_DBG
|
Debug |
CONFIG_MEMFAULT_NCS_LOG_LEVEL_ERR
|
Error |
CONFIG_MEMFAULT_NCS_LOG_LEVEL_INF
|
Info |
CONFIG_MEMFAULT_NCS_LOG_LEVEL_OFF
|
Off |
CONFIG_MEMFAULT_NCS_LOG_LEVEL_WRN
|
Warning |
CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION
|
Enable getting maximum slab utilization |
CONFIG_MGMT_CBORATTR_MAX_SIZE
|
The maximum size of a CBOR attribute during decoding |
CONFIG_MGMT_FMFU_LOG_LEVEL
|
|
CONFIG_MGMT_FMFU_LOG_LEVEL_DBG
|
Debug |
CONFIG_MGMT_FMFU_LOG_LEVEL_ERR
|
Error |
CONFIG_MGMT_FMFU_LOG_LEVEL_INF
|
Info |
CONFIG_MGMT_FMFU_LOG_LEVEL_OFF
|
Off |
CONFIG_MGMT_FMFU_LOG_LEVEL_WRN
|
Warning |
CONFIG_MGMT_SETTINGS_LOG_LEVEL
|
|
CONFIG_MGMT_SETTINGS_LOG_LEVEL_DBG
|
Debug |
CONFIG_MGMT_SETTINGS_LOG_LEVEL_ERR
|
Error |
CONFIG_MGMT_SETTINGS_LOG_LEVEL_INF
|
Info |
CONFIG_MGMT_SETTINGS_LOG_LEVEL_OFF
|
Off |
CONFIG_MGMT_SETTINGS_LOG_LEVEL_WRN
|
Warning |
CONFIG_MICROBIT_DISPLAY
|
BBC micro:bit 5x5 LED Display support |
CONFIG_MICROBIT_DISPLAY_STR_MAX
|
Maximum length of strings that can be shown on the display |
CONFIG_MINIMAL_LIBC
|
Minimal C library |
CONFIG_MINIMAL_LIBC_CALLOC
|
Enable minimal libc trivial calloc implementation |
CONFIG_MINIMAL_LIBC_LL_PRINTF
|
Build with minimal libc long long printf |
CONFIG_MINIMAL_LIBC_MALLOC
|
Enable minimal libc malloc implementation |
CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE
|
Size of the minimal libc malloc arena |
CONFIG_MINIMAL_LIBC_OPTIMIZE_STRING_FOR_SIZE
|
Use size optimized string functions |
CONFIG_MINIMAL_LIBC_RAND
|
Enables rand and srand functions |
CONFIG_MINIMAL_LIBC_REALLOCARRAY
|
Enable minimal libc trivial reallocarray implementation |
CONFIG_MIPI_SYST_LIB
|
MIPI SyS-T Library Support |
CONFIG_MIPI_SYST_RAW_DATA
|
output MIPI SyS-T raw data packet |
CONFIG_MIPI_SYST_STP
|
STP Transport Layer for MIPI SyS-T |
CONFIG_MISRA_SANE
|
MISRA standards compliance features |
CONFIG_MMU
|
Enable MMU features |
CONFIG_MMU_PAGE_SIZE
|
Size of smallest granularity MMU page |
CONFIG_MODBUS
|
Modbus support |
CONFIG_MODBUS_ASCII_MODE
|
Modbus transmission mode ASCII |
CONFIG_MODBUS_BUFFER_SIZE
|
Modbus buffer size |
CONFIG_MODBUS_CLIENT
|
|
CONFIG_MODBUS_FC08_DIAGNOSTIC
|
Enable FC08 Diagnostic support |
CONFIG_MODBUS_FP_EXTENSIONS
|
Floating-Point extensions |
CONFIG_MODBUS_LOG_LEVEL
|
|
CONFIG_MODBUS_LOG_LEVEL_DBG
|
Debug |
CONFIG_MODBUS_LOG_LEVEL_ERR
|
Error |
CONFIG_MODBUS_LOG_LEVEL_INF
|
Info |
CONFIG_MODBUS_LOG_LEVEL_OFF
|
Off |
CONFIG_MODBUS_LOG_LEVEL_WRN
|
Warning |
CONFIG_MODBUS_NUMOF_RAW_ADU
|
Number of raw ADU instances |
CONFIG_MODBUS_RAW_ADU
|
Modbus raw ADU support |
CONFIG_MODBUS_ROLE_CLIENT
|
Client support |
CONFIG_MODBUS_ROLE_CLIENT_SERVER
|
Client and server support |
CONFIG_MODBUS_ROLE_SERVER
|
Server support |
CONFIG_MODBUS_SERIAL
|
Modbus over serial line support |
CONFIG_MODBUS_SERVER
|
|
CONFIG_MODEM
|
Modem Drivers |
CONFIG_MODEM_CELL_INFO
|
Enable querying for operator and cell info |
CONFIG_MODEM_CMD_HANDLER
|
Generic modem command handler |
CONFIG_MODEM_CMD_HANDLER_MAX_PARAM_COUNT
|
Maximum number of params parsed per command |
CONFIG_MODEM_CONTEXT
|
Modem context helper driver [EXPERIMENTAL] |
CONFIG_MODEM_CONTEXT_MAX_NUM
|
Maximum number of modem contexts |
CONFIG_MODEM_CONTEXT_VERBOSE_DEBUG
|
Verbose debug output in the modem context |
CONFIG_MODEM_GSM_APN
|
Access Point Name |
CONFIG_MODEM_GSM_ATTACH_TIMEOUT
|
Timeout for attaching to packet service |
CONFIG_MODEM_GSM_ENABLE_CESQ_RSSI
|
Enable +CESQ RSSI measurement |
CONFIG_MODEM_GSM_FACTORY_RESET_AT_BOOT
|
Factory reset modem at boot |
CONFIG_MODEM_GSM_GENERIC
|
Generic GSM modem |
CONFIG_MODEM_GSM_INIT_PRIORITY
|
Init priority for the GSM modem driver |
CONFIG_MODEM_GSM_MANUAL_MCCMNO
|
MCC/MNO for establishing network connection |
CONFIG_MODEM_GSM_PPP
|
Support GSM modems |
CONFIG_MODEM_GSM_RSSI_POLLING_PERIOD
|
Configure RSSI polling period (in seconds) |
CONFIG_MODEM_GSM_RX_STACK_SIZE
|
Size of the stack allocated for receiving data from modem |
CONFIG_MODEM_GSM_SIMCOM
|
SIMCOM modem |
CONFIG_MODEM_GSM_UART_NAME
|
UART device name the modem is connected to |
CONFIG_MODEM_HL7800
|
Enable Sierra Wireless HL7800 modem driver |
CONFIG_MODEM_HL7800_APN_NAME
|
APN name for establishing network connection |
CONFIG_MODEM_HL7800_BAND_1
|
Enable Band 1 (2000MHz) |
CONFIG_MODEM_HL7800_BAND_10
|
Enable Band 10 (2100MHz) |
CONFIG_MODEM_HL7800_BAND_12
|
Enable Band 12 (700MHz) |
CONFIG_MODEM_HL7800_BAND_13
|
Enable Band 13 (700MHz) |
CONFIG_MODEM_HL7800_BAND_14
|
Enable Band 14 (700MHz) |
CONFIG_MODEM_HL7800_BAND_17
|
Enable Band 17 (700MHz) |
CONFIG_MODEM_HL7800_BAND_18
|
Enable Band 18 (800MHz) |
CONFIG_MODEM_HL7800_BAND_19
|
Enable Band 19 (800MHz) |
CONFIG_MODEM_HL7800_BAND_2
|
Enable Band 2 (1900MHz) |
CONFIG_MODEM_HL7800_BAND_20
|
Enable Band 20 (800MHz) |
CONFIG_MODEM_HL7800_BAND_25
|
Enable Band 25 (1900MHz) |
CONFIG_MODEM_HL7800_BAND_26
|
Enable Band 26 (800MHz) |
CONFIG_MODEM_HL7800_BAND_27
|
Enable Band 27 (800MHz) |
CONFIG_MODEM_HL7800_BAND_28
|
Enable Band 28 (700MHz) |
CONFIG_MODEM_HL7800_BAND_3
|
Enable Band 3 (1800MHz) |
CONFIG_MODEM_HL7800_BAND_4
|
Enable Band 4 (1700MHz) |
CONFIG_MODEM_HL7800_BAND_5
|
Enable Band 5 (850MHz) |
CONFIG_MODEM_HL7800_BAND_66
|
Enable Band 66 (1800MHz) |
CONFIG_MODEM_HL7800_BAND_8
|
Enable Band 8 (900MHz) |
CONFIG_MODEM_HL7800_BAND_9
|
Enable Band 9 (1900MHz) |
CONFIG_MODEM_HL7800_CONFIGURE_BANDS
|
Configure modem bands |
CONFIG_MODEM_HL7800_EDRX
|
eDRX |
CONFIG_MODEM_HL7800_EDRX_VALUE
|
Requested eDRX timer |
CONFIG_MODEM_HL7800_FW_UPDATE
|
Enable firmware update |
CONFIG_MODEM_HL7800_INIT_PRIORITY
|
HL7800 driver init priority |
CONFIG_MODEM_HL7800_LOW_POWER_MODE
|
Enable low power modes |
CONFIG_MODEM_HL7800_PSM
|
PSM |
CONFIG_MODEM_HL7800_PSM_ACTIVE_TIME
|
Requested active time |
CONFIG_MODEM_HL7800_PSM_PERIODIC_TAU
|
Requested extended periodic TAU timer |
CONFIG_MODEM_HL7800_RAT_M1
|
LTE-M1 |
CONFIG_MODEM_HL7800_RAT_NB1
|
NB-IoT |
CONFIG_MODEM_HL7800_RAT_NO_CHANGE
|
Don’t change the RAT |
CONFIG_MODEM_HL7800_RECV_BUF_CNT
|
The number of allocated network buffers |
CONFIG_MODEM_HL7800_RECV_BUF_SIZE
|
The size of the network buffers in bytes |
CONFIG_MODEM_HL7800_RX_STACK_SIZE
|
Size of the stack for the HL7800 modem driver RX thread |
CONFIG_MODEM_HL7800_RX_WORKQ_STACK_SIZE
|
Size of the stack for the HL7800 modem driver work queue |
CONFIG_MODEM_HL7800_SET_APN_NAME_ON_STARTUP
|
Set APN name during driver init |
CONFIG_MODEM_IFACE_UART
|
UART-based modem interface |
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL
|
|
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL_DBG
|
Debug |
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL_ERR
|
Error |
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL_INF
|
Info |
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL_OFF
|
Off |
CONFIG_MODEM_KEY_MGMT_LOG_LEVEL_WRN
|
Warning |
CONFIG_MODEM_LOG_LEVEL
|
|
CONFIG_MODEM_LOG_LEVEL_DBG
|
Debug |
CONFIG_MODEM_LOG_LEVEL_ERR
|
Error |
CONFIG_MODEM_LOG_LEVEL_INF
|
Info |
CONFIG_MODEM_LOG_LEVEL_OFF
|
Off |
CONFIG_MODEM_LOG_LEVEL_WRN
|
Warning |
CONFIG_MODEM_QUECTEL_BG9X
|
Enable quectel modem driver |
CONFIG_MODEM_QUECTEL_BG9X_APN
|
APN for establishing network connection |
CONFIG_MODEM_QUECTEL_BG9X_INIT_PRIORITY
|
quectel BG9X driver init priority |
CONFIG_MODEM_QUECTEL_BG9X_PASSWORD
|
Password for establishing network connection |
CONFIG_MODEM_QUECTEL_BG9X_RX_STACK_SIZE
|
Stack size for the quectel BG9X modem driver RX thread |
CONFIG_MODEM_QUECTEL_BG9X_RX_WORKQ_STACK_SIZE
|
Stack size for the quectel BG9X modem driver work queue |
CONFIG_MODEM_QUECTEL_BG9X_USERNAME
|
Username for establishing network connection |
CONFIG_MODEM_RECEIVER
|
Enable modem receiver helper driver |
CONFIG_MODEM_RECEIVER_MAX_CONTEXTS
|
Maximum number of modem receiver contexts |
CONFIG_MODEM_SHELL
|
Enable modem shell utilities |
CONFIG_MODEM_SIM_NUMBERS
|
Enable querying the SIM for IMSI and ICCID |
CONFIG_MODEM_SOCKET
|
Generic modem socket support layer |
CONFIG_MODEM_SOCKET_PACKET_COUNT
|
Maximum number of stored packet sizes per socket |
CONFIG_MODEM_UBLOX_SARA
|
Enable u-blox SARA modem driver |
CONFIG_MODEM_UBLOX_SARA_AUTODETECT_APN
|
detect APN automatically |
CONFIG_MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES
|
list of profiles to search when autodetecting APN |
CONFIG_MODEM_UBLOX_SARA_AUTODETECT_VARIANT
|
detect automatically |
CONFIG_MODEM_UBLOX_SARA_R4
|
u-blox SARA-R4 |
CONFIG_MODEM_UBLOX_SARA_R4_APN
|
APN for establishing network connection |
CONFIG_MODEM_UBLOX_SARA_R4_INIT_PRIORITY
|
u-blox SARA-R4 driver init priority |
CONFIG_MODEM_UBLOX_SARA_R4_MANUAL_MCCMNO
|
MCC/MNOfor establishing network connection |
CONFIG_MODEM_UBLOX_SARA_R4_NET_STATUS
|
Enable support for network status indication |
CONFIG_MODEM_UBLOX_SARA_R4_NET_STATUS_PIN
|
Network status indication GPIO ID |
CONFIG_MODEM_UBLOX_SARA_R4_RX_STACK_SIZE
|
Stack size for the u-blox SARA-R4 modem driver RX thread |
CONFIG_MODEM_UBLOX_SARA_R4_RX_WORKQ_STACK_SIZE
|
Stack size for the u-blox SARA-R4 modem driver work queue |
CONFIG_MODEM_UBLOX_SARA_RSSI_WORK
|
Enable RSSI polling work |
CONFIG_MODEM_UBLOX_SARA_RSSI_WORK_PERIOD
|
Configure RSSI WORK polling frequency |
CONFIG_MODEM_UBLOX_SARA_U2
|
u-blox SARA-U2 |
CONFIG_MODEM_WNCM14A2A
|
Enable Wistron LTE-M modem driver |
CONFIG_MODEM_WNCM14A2A_APN_NAME
|
APN name for establishing network connection |
CONFIG_MODEM_WNCM14A2A_INIT_PRIORITY
|
WNC-M14A2A driver init priority |
CONFIG_MODEM_WNCM14A2A_RX_STACK_SIZE
|
Size of the stack for the WNC-M14A2A modem driver RX thread |
CONFIG_MODEM_WNCM14A2A_RX_WORKQ_STACK_SIZE
|
Size of the stack for the WNC-M14A2A modem driver work queue |
CONFIG_MPR
|
MPR pressure sensor |
CONFIG_MPR_PRESSURE_RANGE_0001
|
0 to 1 |
CONFIG_MPR_PRESSURE_RANGE_0015
|
0 to 15 |
CONFIG_MPR_PRESSURE_RANGE_0025
|
0 to 25 |
CONFIG_MPR_PRESSURE_RANGE_0030
|
0 to 30 |
CONFIG_MPR_PRESSURE_RANGE_0060
|
0 to 60 |
CONFIG_MPR_PRESSURE_RANGE_0100
|
0 to 100 |
CONFIG_MPR_PRESSURE_RANGE_0160
|
0 to 160 |
CONFIG_MPR_PRESSURE_RANGE_01_6
|
0 to 1.6 |
CONFIG_MPR_PRESSURE_RANGE_0250
|
0 to 250 |
CONFIG_MPR_PRESSURE_RANGE_02_5
|
0 to 2.5 |
CONFIG_MPR_PRESSURE_RANGE_0400
|
0 to 400 |
CONFIG_MPR_PRESSURE_RANGE_0600
|
0 to 600 |
CONFIG_MPR_PRESSURE_UNIT_B
|
bar |
CONFIG_MPR_PRESSURE_UNIT_K
|
kPa |
CONFIG_MPR_PRESSURE_UNIT_M
|
mbar |
CONFIG_MPR_PRESSURE_UNIT_P
|
psi |
CONFIG_MPR_TRANSFER_FUNCTION_A
|
A |
CONFIG_MPR_TRANSFER_FUNCTION_B
|
B |
CONFIG_MPR_TRANSFER_FUNCTION_C
|
C |
CONFIG_MPSC_CLEAR_ALLOCATED
|
Clear allocated packet |
CONFIG_MPSC_PBUF
|
Multi producer, single consumer packet buffer |
CONFIG_MPSL_CX_LOG_LEVEL
|
|
CONFIG_MPSL_CX_LOG_LEVEL_DBG
|
Debug |
CONFIG_MPSL_CX_LOG_LEVEL_ERR
|
Error |
CONFIG_MPSL_CX_LOG_LEVEL_INF
|
Info |
CONFIG_MPSL_CX_LOG_LEVEL_OFF
|
Off |
CONFIG_MPSL_CX_LOG_LEVEL_WRN
|
Warning |
CONFIG_MPSL_FEM_LOG_LEVEL
|
|
CONFIG_MPSL_FEM_LOG_LEVEL_DBG
|
Debug |
CONFIG_MPSL_FEM_LOG_LEVEL_ERR
|
Error |
CONFIG_MPSL_FEM_LOG_LEVEL_INF
|
Info |
CONFIG_MPSL_FEM_LOG_LEVEL_OFF
|
Off |
CONFIG_MPSL_FEM_LOG_LEVEL_WRN
|
Warning |
CONFIG_MPSL_LOG_LEVEL
|
|
CONFIG_MPSL_LOG_LEVEL_DBG
|
Debug |
CONFIG_MPSL_LOG_LEVEL_ERR
|
Error |
CONFIG_MPSL_LOG_LEVEL_INF
|
Info |
CONFIG_MPSL_LOG_LEVEL_OFF
|
Off |
CONFIG_MPSL_LOG_LEVEL_WRN
|
Warning |
CONFIG_MPU
|
Enable MPU features |
CONFIG_MPU6050
|
MPU6050 Six-Axis Motion Tracking Device |
CONFIG_MPU6050_ACCEL_FS
|
Accelerometer full-scale range |
CONFIG_MPU6050_GYRO_FS
|
Gyroscope full-scale range |
CONFIG_MPU6050_THREAD_PRIORITY
|
Thread priority |
CONFIG_MPU6050_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_MPU6050_TRIGGER
|
|
CONFIG_MPU6050_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_MPU6050_TRIGGER_NONE
|
No trigger |
CONFIG_MPU6050_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_MPU_ALLOW_FLASH_WRITE
|
Add MPU access to write to flash |
CONFIG_MPU_GAP_FILLING
|
Force MPU to be filling in background memory regions |
CONFIG_MPU_LOG_LEVEL
|
|
CONFIG_MPU_LOG_LEVEL_DBG
|
Debug |
CONFIG_MPU_LOG_LEVEL_ERR
|
Error |
CONFIG_MPU_LOG_LEVEL_INF
|
Info |
CONFIG_MPU_LOG_LEVEL_OFF
|
Off |
CONFIG_MPU_LOG_LEVEL_WRN
|
Warning |
CONFIG_MPU_REQUIRES_NON_OVERLAPPING_REGIONS
|
|
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
|
|
CONFIG_MPU_STACK_GUARD
|
Thread Stack Guards |
CONFIG_MPU_STACK_GUARD_MIN_SIZE_FLOAT
|
|
CONFIG_MP_NUM_CPUS
|
Number of CPUs/cores |
CONFIG_MQTT_CLEAN_SESSION
|
MQTT Clean Session Flag. |
CONFIG_MQTT_KEEPALIVE
|
Maximum number of clients Keep alive time for MQTT (in seconds) |
CONFIG_MQTT_LIB
|
Socket MQTT Library Support |
CONFIG_MQTT_LIB_CUSTOM_TRANSPORT
|
Custom transport support for socket MQTT Library |
CONFIG_MQTT_LIB_TLS
|
TLS support for socket MQTT Library |
CONFIG_MQTT_LIB_WEBSOCKET
|
Websocket support for socket MQTT Library |
CONFIG_MQTT_LOG_LEVEL
|
|
CONFIG_MQTT_LOG_LEVEL_DBG
|
Debug |
CONFIG_MQTT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_MQTT_LOG_LEVEL_ERR
|
Error |
CONFIG_MQTT_LOG_LEVEL_INF
|
Info |
CONFIG_MQTT_LOG_LEVEL_OFF
|
Off |
CONFIG_MQTT_LOG_LEVEL_WRN
|
Warning |
CONFIG_MQUEUE_NAMELEN_MAX
|
Maximum size of a name length |
CONFIG_MS5607
|
MS5607 pressure and temperature sensor |
CONFIG_MS5607_PRES_OVER_1024X
|
x1024 |
CONFIG_MS5607_PRES_OVER_2048X
|
x2048 |
CONFIG_MS5607_PRES_OVER_256X
|
x256 |
CONFIG_MS5607_PRES_OVER_4096X
|
x4096 |
CONFIG_MS5607_PRES_OVER_512X
|
x512 |
CONFIG_MS5607_TEMP_OVER_1024X
|
x1024 |
CONFIG_MS5607_TEMP_OVER_2048X
|
x2048 |
CONFIG_MS5607_TEMP_OVER_256X
|
x256 |
CONFIG_MS5607_TEMP_OVER_4096X
|
x4096 |
CONFIG_MS5607_TEMP_OVER_512X
|
x512 |
CONFIG_MS5837
|
MS5837 pressure and temperature sensor |
CONFIG_MSG_COUNT_MAX
|
Maximum number of messages in message queue |
CONFIG_MSG_SIZE_MAX
|
Maximum size of a message |
CONFIG_MULTIBOOT
|
Generate multiboot header |
CONFIG_MULTIBOOT_FRAMEBUF
|
Multiboot framebuffer support |
CONFIG_MULTIBOOT_FRAMEBUF_X
|
Multiboot framebuffer X pixels |
CONFIG_MULTIBOOT_FRAMEBUF_Y
|
Multiboot framebuffer Y pixels |
CONFIG_MULTIBOOT_INFO
|
Preserve multiboot information structure |
CONFIG_MULTIBOOT_MEMMAP
|
Use multiboot memory map if provided |
CONFIG_MULTICELL_LOCATION_LOG_LEVEL
|
|
CONFIG_MULTICELL_LOCATION_LOG_LEVEL_DBG
|
Debug |
CONFIG_MULTICELL_LOCATION_LOG_LEVEL_ERR
|
Error |
CONFIG_MULTICELL_LOCATION_LOG_LEVEL_INF
|
Info |
CONFIG_MULTICELL_LOCATION_LOG_LEVEL_OFF
|
Off |
CONFIG_MULTICELL_LOCATION_LOG_LEVEL_WRN
|
Warning |
CONFIG_MULTITHREADING
|
Multi-threading |
CONFIG_MULTI_LEVEL_INTERRUPTS
|
Multi-level interrupt support |
CONFIG_NANOPB
|
Nanopb Support |
CONFIG_NANOPB_BUFFER_ONLY
|
Buffers only |
CONFIG_NANOPB_ENABLE_MALLOC
|
Enable malloc usage |
CONFIG_NANOPB_ENCODE_ARRAYS_UNPACKED
|
Encode arrays unpacked |
CONFIG_NANOPB_MAX_REQUIRED_FIELDS
|
Max number of required fields |
CONFIG_NANOPB_NO_ERRMSG
|
Disable error messages |
CONFIG_NANOPB_VALIDATE_UTF8
|
Validate UTF-8 |
CONFIG_NANOPB_WITHOUT_64BIT
|
Disable 64-bit integer fields |
CONFIG_NATIVE_APPLICATION
|
Build as a native host application |
CONFIG_NATIVE_POSIX_CONSOLE
|
Use the host terminal for console |
CONFIG_NATIVE_POSIX_CONSOLE_INIT_PRIORITY
|
Init priority |
CONFIG_NATIVE_POSIX_SLOWDOWN_TO_REAL_TIME
|
Slow down execution to real time |
CONFIG_NATIVE_POSIX_STDIN_CONSOLE
|
Use the host terminal stdin |
CONFIG_NATIVE_POSIX_STDOUT_CONSOLE
|
Print to the host terminal stdout |
CONFIG_NATIVE_POSIX_TIMER
|
(POSIX) native_posix timer driver |
CONFIG_NATIVE_STDIN_POLL_PERIOD
|
Polling period for stdin |
CONFIG_NATIVE_UART_0_ON_OWN_PTY
|
Connect the UART to its own pseudo terminal |
CONFIG_NATIVE_UART_0_ON_STDINOUT
|
Connect the UART to the invoking shell stdin/stdout |
CONFIG_NATIVE_UART_AUTOATTACH_DEFAULT_CMD
|
Default command to attach the UART to a new terminal |
CONFIG_NEED_LIBC_MEM_PARTITION
|
|
CONFIG_NESTED_INTERRUPTS
|
Enable nested interrupts |
CONFIG_NETWORKING
|
Link layer and IP networking support |
CONFIG_NET_6LO
|
Enable 6lowpan IPv6 Compression library |
CONFIG_NET_6LO_CONTEXT
|
Enable 6lowpan context based compression |
CONFIG_NET_6LO_LOG_LEVEL
|
|
CONFIG_NET_6LO_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_6LO_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_6LO_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_6LO_LOG_LEVEL_INF
|
Info |
CONFIG_NET_6LO_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_6LO_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ARP
|
Enable ARP |
CONFIG_NET_ARP_GRATUITOUS
|
Support gratuitous ARP requests/replies. |
CONFIG_NET_ARP_LOG_LEVEL
|
|
CONFIG_NET_ARP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_ARP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_ARP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_ARP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_ARP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_ARP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ARP_TABLE_SIZE
|
Number of entries in ARP table. |
CONFIG_NET_BUF
|
Network buffer support |
CONFIG_NET_BUF_DATA_POOL_SIZE
|
Size of the memory pool where buffers are allocated from |
CONFIG_NET_BUF_DATA_SIZE
|
Size of each network data fragment |
CONFIG_NET_BUF_FIXED_DATA_SIZE
|
Fixed data size buffer |
CONFIG_NET_BUF_LOG
|
Network buffer logging |
CONFIG_NET_BUF_LOG_LEVEL
|
|
CONFIG_NET_BUF_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_BUF_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_BUF_LOG_LEVEL_INF
|
Info |
CONFIG_NET_BUF_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_BUF_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_BUF_POOL_USAGE
|
Network buffer pool usage tracking |
CONFIG_NET_BUF_RX_COUNT
|
How many network buffers are allocated for receiving data |
CONFIG_NET_BUF_SIMPLE_LOG
|
Network buffer memory debugging |
CONFIG_NET_BUF_TX_COUNT
|
How many network buffers are allocated for sending data |
CONFIG_NET_BUF_USER_DATA_SIZE
|
Size of user_data available in every network buffer |
CONFIG_NET_BUF_VARIABLE_DATA_SIZE
|
Variable data size buffer [EXPERIMENTAL] |
CONFIG_NET_BUF_WARN_ALLOC_INTERVAL
|
Interval of Network buffer allocation warnings |
CONFIG_NET_CAPTURE
|
Network packet capture support |
CONFIG_NET_CAPTURE_BUF_COUNT
|
How many network buffers to allocate for capture |
CONFIG_NET_CAPTURE_DEVICE_COUNT
|
Number of network capture devices |
CONFIG_NET_CAPTURE_LOG_LEVEL
|
|
CONFIG_NET_CAPTURE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CAPTURE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CAPTURE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CAPTURE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CAPTURE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CAPTURE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_CAPTURE_PKT_COUNT
|
How many network packets to allocate for capture |
CONFIG_NET_CAPTURE_TX_DEBUG
|
Debug sent packets |
CONFIG_NET_CONFIG_AUTO_INIT
|
Init networking support automatically during device startup |
CONFIG_NET_CONFIG_BT_NODE
|
Enable Bluetooth node support |
CONFIG_NET_CONFIG_CLOCK_SNTP_INIT
|
Initialize system clock using SNTP on application startup |
CONFIG_NET_CONFIG_IEEE802154_CHANNEL
|
IEEE 802.15.4 channel |
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME
|
IEEE 802.15.4 device name |
CONFIG_NET_CONFIG_IEEE802154_PAN_ID
|
IEEE 802.15.4 PAN ID |
CONFIG_NET_CONFIG_IEEE802154_RADIO_TX_POWER
|
IEEE 802.15.4 TX power in dbm |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_KEY
|
IEEE 802.15.4 security key |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_KEY_MODE
|
IEEE 802.15.4 security key mode |
CONFIG_NET_CONFIG_IEEE802154_SECURITY_LEVEL
|
IEEE 802.15.4 security level (0-7) |
CONFIG_NET_CONFIG_INIT_PRIO
|
Startup priority for the network application init |
CONFIG_NET_CONFIG_INIT_TIMEOUT
|
How long to wait for networking to be ready and available |
CONFIG_NET_CONFIG_LOG_LEVEL
|
|
CONFIG_NET_CONFIG_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CONFIG_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CONFIG_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CONFIG_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CONFIG_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CONFIG_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_CONFIG_MY_IPV4_ADDR
|
My IPv4 address |
CONFIG_NET_CONFIG_MY_IPV4_GW
|
My IPv4 gateway |
CONFIG_NET_CONFIG_MY_IPV4_NETMASK
|
My IPv4 netmask |
CONFIG_NET_CONFIG_MY_IPV6_ADDR
|
My IPv6 address |
CONFIG_NET_CONFIG_NEED_IPV4
|
This application wants IPv4 support |
CONFIG_NET_CONFIG_NEED_IPV6
|
This application wants IPv6 support |
CONFIG_NET_CONFIG_NEED_IPV6_ROUTER
|
This application wants IPv6 router to exists |
CONFIG_NET_CONFIG_PEER_IPV4_ADDR
|
Peer IPv4 address |
CONFIG_NET_CONFIG_PEER_IPV6_ADDR
|
Peer IPv6 address |
CONFIG_NET_CONFIG_SETTINGS
|
Set network settings for applications |
CONFIG_NET_CONFIG_SNTP_INIT_SERVER
|
SNTP server to use for system clock init |
CONFIG_NET_CONFIG_SNTP_INIT_TIMEOUT
|
SNTP timeout to init system clock (ms) |
CONFIG_NET_CONNECTION_MANAGER
|
Enable network connection manager [EXPERIMENTAL] |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL
|
|
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CONNECTION_MANAGER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_CONNECTION_MANAGER_PRIORITY
|
Thread starting priority |
CONFIG_NET_CONNECTION_MANAGER_STACK_SIZE
|
Size of the stack allocated for the connection manager |
CONFIG_NET_CONN_LOG_LEVEL
|
|
CONFIG_NET_CONN_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CONN_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CONN_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CONN_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CONN_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CONN_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_CONTEXT_CHECK
|
Check options when calling various net_context functions |
CONFIG_NET_CONTEXT_LOG_LEVEL
|
|
CONFIG_NET_CONTEXT_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CONTEXT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CONTEXT_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CONTEXT_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CONTEXT_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CONTEXT_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_CONTEXT_NET_PKT_POOL
|
Enable net_buf TX pool / context |
CONFIG_NET_CONTEXT_PRIORITY
|
Add priority support to net_context |
CONFIG_NET_CONTEXT_RCVTIMEO
|
Add RCVTIMEO support to net_context |
CONFIG_NET_CONTEXT_SNDTIMEO
|
Add SNDTIMEO support to net_context |
CONFIG_NET_CONTEXT_SYNC_RECV
|
Support synchronous functionality in net_context_recv() API |
CONFIG_NET_CONTEXT_TXTIME
|
Add TXTIME support to net_context |
CONFIG_NET_CORE_LOG_LEVEL
|
|
CONFIG_NET_CORE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_CORE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_CORE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_CORE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_CORE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_CORE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET
|
Enable IEEE 802.15.4 packet display |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_FULL
|
Print-out both RX and TX packets |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_RX
|
Print-out only RX packets |
CONFIG_NET_DEBUG_L2_IEEE802154_DISPLAY_PACKET_TX
|
Print-out only TX packets |
CONFIG_NET_DEBUG_MGMT_EVENT_STACK
|
Enable stack analysis output on Net MGMT event core |
CONFIG_NET_DEBUG_NET_PKT_ALLOC
|
Debug network packet and buffer individual allocation |
CONFIG_NET_DEBUG_NET_PKT_EXTERNALS
|
How many external network packet allocations |
CONFIG_NET_DEBUG_NET_PKT_NON_FRAGILE_ACCESS
|
Reduce r/w fragility by resetting the packet cursor when freed |
CONFIG_NET_DEFAULT_IF_BLUETOOTH
|
Bluetooth |
CONFIG_NET_DEFAULT_IF_CANBUS
|
6LoCAN (IPv6 over CAN) interface |
CONFIG_NET_DEFAULT_IF_CANBUS_RAW
|
Socket CAN interface |
CONFIG_NET_DEFAULT_IF_DUMMY
|
Dummy testing interface |
CONFIG_NET_DEFAULT_IF_ETHERNET
|
Ethernet |
CONFIG_NET_DEFAULT_IF_FIRST
|
First available interface |
CONFIG_NET_DEFAULT_IF_IEEE802154
|
IEEE 802.15.4 |
CONFIG_NET_DEFAULT_IF_OFFLOAD
|
Offloaded interface |
CONFIG_NET_DEFAULT_IF_PPP
|
PPP interface |
CONFIG_NET_DHCPV4
|
Enable DHCPv4 client |
CONFIG_NET_DHCPV4_INITIAL_DELAY_MAX
|
Maximum time out for initial discover request |
CONFIG_NET_DHCPV4_LOG_LEVEL
|
|
CONFIG_NET_DHCPV4_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_DHCPV4_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_DHCPV4_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_DHCPV4_LOG_LEVEL_INF
|
Info |
CONFIG_NET_DHCPV4_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_DHCPV4_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_DSA
|
Distributed Switch Architecture support |
CONFIG_NET_DSA_LOG_LEVEL
|
|
CONFIG_NET_DSA_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_DSA_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_DSA_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_DSA_LOG_LEVEL_INF
|
Info |
CONFIG_NET_DSA_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_DSA_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ETHERNET_BRIDGE
|
Ethernet Bridging support |
CONFIG_NET_ETHERNET_BRIDGE_DEFAULT
|
Declare one bridge instance for shell usage |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL
|
|
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_ETHERNET_BRIDGE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ETHERNET_BRIDGE_SHELL
|
Ethernet Bridging management shell |
CONFIG_NET_GPTP
|
Enable IEEE 802.1AS (gPTP) support [EXPERIMENTAL] |
CONFIG_NET_GPTP_ANNOUNCE_RECEIPT_TIMEOUT
|
Number of announce intervals to wait |
CONFIG_NET_GPTP_BMCA_PRIORITY1
|
BMCA priority1 value |
CONFIG_NET_GPTP_BMCA_PRIORITY2
|
BMCA priority2 value |
CONFIG_NET_GPTP_CLOCK_ACCURACY
|
|
CONFIG_NET_GPTP_CLOCK_ACCURACY_100MS
|
100ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_100NS
|
100ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_100US
|
100us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10MS
|
10ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10S
|
10s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_10US
|
10us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1MS
|
1ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1S
|
1s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_1US
|
1us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250MS
|
250ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250NS
|
250ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_250US
|
250us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25MS
|
25ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25NS
|
25ns |
CONFIG_NET_GPTP_CLOCK_ACCURACY_25US
|
25us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_2_5MS
|
1.5ms |
CONFIG_NET_GPTP_CLOCK_ACCURACY_2_5US
|
2.5us |
CONFIG_NET_GPTP_CLOCK_ACCURACY_GT_10S
|
> 10s |
CONFIG_NET_GPTP_CLOCK_ACCURACY_UNKNOWN
|
Unknown |
CONFIG_NET_GPTP_GM_CAPABLE
|
Enable IEEE 802.1AS GrandMaster Capability |
CONFIG_NET_GPTP_INIT_LOG_ANNOUNCE_ITV
|
Set initial announce interval in Log2 base |
CONFIG_NET_GPTP_INIT_LOG_PDELAY_REQ_ITV
|
Set initial pdelay request interval in Log2 base |
CONFIG_NET_GPTP_INIT_LOG_SYNC_ITV
|
Set initial sync interval in Log2 base |
CONFIG_NET_GPTP_LOG_LEVEL
|
|
CONFIG_NET_GPTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_GPTP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_GPTP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_GPTP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_GPTP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_GPTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_GPTP_NEIGHBOR_PROP_DELAY_THR
|
Set neighbor propagation delay threshold (ns) |
CONFIG_NET_GPTP_NUM_PORTS
|
Number of gPTP ports |
CONFIG_NET_GPTP_PATH_TRACE_ELEMENTS
|
How many path trace elements to track |
CONFIG_NET_GPTP_PROBE_CLOCK_SOURCE_ON_DEMAND
|
Probe clock source on demand |
CONFIG_NET_GPTP_STATISTICS
|
Collect gPTP statistics |
CONFIG_NET_GPTP_SYNC_RECEIPT_TIMEOUT
|
Number of sync intervals to wait |
CONFIG_NET_GPTP_USE_DEFAULT_CLOCK_UPDATE
|
Use a default clock update function |
CONFIG_NET_GPTP_VLAN
|
Run gPTP over VLAN link |
CONFIG_NET_GPTP_VLAN_TAG
|
VLAN tag to use |
CONFIG_NET_HEADERS_ALWAYS_CONTIGUOUS
|
|
CONFIG_NET_HOSTNAME
|
The hostname of this device |
CONFIG_NET_HOSTNAME_ENABLE
|
Add hostname to the device |
CONFIG_NET_HOSTNAME_LOG_LEVEL
|
|
CONFIG_NET_HOSTNAME_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_HOSTNAME_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_HOSTNAME_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_HOSTNAME_LOG_LEVEL_INF
|
Info |
CONFIG_NET_HOSTNAME_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_HOSTNAME_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_HOSTNAME_UNIQUE
|
Make hostname unique |
CONFIG_NET_HOSTNAME_UNIQUE_UPDATE
|
Update unique hostname |
CONFIG_NET_HTTP_LOG_LEVEL
|
|
CONFIG_NET_HTTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_HTTP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_HTTP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_HTTP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_HTTP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_HTTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ICMPV4_ACCEPT_BROADCAST
|
Accept broadcast ICMPv4 echo-request |
CONFIG_NET_ICMPV4_LOG_LEVEL
|
|
CONFIG_NET_ICMPV4_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_ICMPV4_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_ICMPV4_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_ICMPV4_LOG_LEVEL_INF
|
Info |
CONFIG_NET_ICMPV4_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_ICMPV4_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ICMPV6_LOG_LEVEL
|
|
CONFIG_NET_ICMPV6_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_ICMPV6_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_ICMPV6_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_ICMPV6_LOG_LEVEL_INF
|
Info |
CONFIG_NET_ICMPV6_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_ICMPV6_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IF_IPV6_PREFIX_COUNT
|
Max number of IPv6 prefixes per network interface |
CONFIG_NET_IF_LOG_LEVEL
|
|
CONFIG_NET_IF_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_IF_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_IF_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_IF_LOG_LEVEL_INF
|
Info |
CONFIG_NET_IF_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_IF_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IF_MAX_IPV4_COUNT
|
Max number of IPv4 network interfaces in the system |
CONFIG_NET_IF_MAX_IPV6_COUNT
|
Max number of IPv6 network interfaces in the system |
CONFIG_NET_IF_MCAST_IPV4_ADDR_COUNT
|
Max number of multicast IPv4 addresses per network interface |
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT
|
Max number of multicast IPv6 addresses per network interface |
CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT
|
Max number of unicast IPv4 addresses per network interface |
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT
|
Max number of unicast IPv6 addresses per network interface |
CONFIG_NET_INITIAL_HOP_LIMIT
|
Initial hop limit for a connection |
CONFIG_NET_INITIAL_TTL
|
Initial time to live for a connection |
CONFIG_NET_INIT_PRIO
|
|
CONFIG_NET_IPV4
|
IPv4 |
CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
|
Accept 0.0.0.0 broadcast destination address |
CONFIG_NET_IPV4_AUTO
|
Enable IPv4 autoconfiguration [EXPERIMENTAL] |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL
|
|
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_INF
|
Info |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_IPV4_AUTO_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IPV4_HDR_OPTIONS
|
Enable IPv4 Header options support |
CONFIG_NET_IPV4_IGMP
|
Internet Group Management Protocol (IGMP) support |
CONFIG_NET_IPV4_LOG_LEVEL
|
|
CONFIG_NET_IPV4_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_IPV4_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_IPV4_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_IPV4_LOG_LEVEL_INF
|
Info |
CONFIG_NET_IPV4_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_IPV4_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IPV6
|
IPv6 |
CONFIG_NET_IPV6_DAD
|
Activate duplicate address detection |
CONFIG_NET_IPV6_FRAGMENT
|
Support IPv6 fragmentation |
CONFIG_NET_IPV6_FRAGMENT_MAX_COUNT
|
How many packets to reassemble at a time |
CONFIG_NET_IPV6_FRAGMENT_TIMEOUT
|
How long to wait the fragments to receive |
CONFIG_NET_IPV6_LOG_LEVEL
|
|
CONFIG_NET_IPV6_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_IPV6_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_IPV6_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_IPV6_LOG_LEVEL_INF
|
Info |
CONFIG_NET_IPV6_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_IPV6_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IPV6_MAX_NEIGHBORS
|
How many IPv6 neighbors are supported |
CONFIG_NET_IPV6_MLD
|
Multicast Listener Discovery support |
CONFIG_NET_IPV6_NBR_CACHE
|
Neighbor cache |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL
|
|
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_IPV6_NBR_CACHE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_IPV6_ND
|
Activate neighbor discovery |
CONFIG_NET_IPV6_RA_RDNSS
|
Support RA RDNSS option |
CONFIG_NET_IP_ADDR_CHECK
|
Check IP address validity before sending IP packet |
CONFIG_NET_L2_BT
|
Enable Bluetooth support |
CONFIG_NET_L2_BT_LOG_LEVEL
|
|
CONFIG_NET_L2_BT_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_BT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_BT_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_BT_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_BT_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_BT_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_BT_MGMT
|
Enable Bluetooth Network Management support |
CONFIG_NET_L2_BT_SEC_LEVEL
|
Security level of Bluetooth Link |
CONFIG_NET_L2_BT_SHELL
|
Enable Bluetooth shell module |
CONFIG_NET_L2_BT_ZEP1656
|
***Workaround to work with Linux.*** |
CONFIG_NET_L2_CANBUS
|
Enable CANBUS L2 layer [EXPERIMENTAL] |
CONFIG_NET_L2_CANBUS_BS
|
BS (Block Size) |
CONFIG_NET_L2_CANBUS_DAD_RETRIES
|
Number of DAD retries |
CONFIG_NET_L2_CANBUS_ETH_TRANSLATOR
|
Enable 6LoCAN to Ethernet translator |
CONFIG_NET_L2_CANBUS_FIXED_ADDR
|
L2 address |
CONFIG_NET_L2_CANBUS_LOG_LEVEL
|
|
CONFIG_NET_L2_CANBUS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_CANBUS_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_CANBUS_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_CANBUS_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_CANBUS_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_CANBUS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_CANBUS_RAW
|
Enable CANBUS RAW l2 layer |
CONFIG_NET_L2_CANBUS_STMIN
|
STmin |
CONFIG_NET_L2_CANBUS_USE_FIXED_ADDR
|
Use fixed L2 address |
CONFIG_NET_L2_DUMMY
|
Enable dummy l2 layer |
CONFIG_NET_L2_ETHERNET
|
Enable Ethernet support |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL
|
|
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_ETHERNET_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_ETHERNET_MGMT
|
Enable Ethernet network management interface |
CONFIG_NET_L2_IEEE802154
|
Enable IEEE 802.15.4 Radio |
CONFIG_NET_L2_IEEE802154_ACK_REPLY
|
Enable IEEE 802.15.4 ACK reply logic |
CONFIG_NET_L2_IEEE802154_FRAGMENT
|
Enable 802.15.4 fragmentation support |
CONFIG_NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE
|
IEEE 802.15.4 Reassembly cache size |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL
|
|
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_IEEE802154_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_IEEE802154_MGMT
|
|
CONFIG_NET_L2_IEEE802154_RADIO_ALOHA
|
IEEE 802.15.4 Aloha radio protocol |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA
|
IEEE 802.15.4 CSMA-CA radio protocol |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BE
|
CSMA MAC maximum backoff exponent |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MAX_BO
|
CSMA maximum backoffs |
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_MIN_BE
|
CSMA MAC minimum backoff exponent |
CONFIG_NET_L2_IEEE802154_RADIO_DFLT_TX_POWER
|
Default radio transmission power |
CONFIG_NET_L2_IEEE802154_RADIO_TX_RETRIES
|
Radio Transmission attempts |
CONFIG_NET_L2_IEEE802154_REASSEMBLY_TIMEOUT
|
IEEE 802.15.4 Reassembly timeout in seconds |
CONFIG_NET_L2_IEEE802154_RFD
|
Support Reduced Functionality Device level |
CONFIG_NET_L2_IEEE802154_SECURITY
|
Enable IEEE 802.15.4 security [EXPERIMENTAL] |
CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME
|
Crypto device name used for <en/de>cryption |
CONFIG_NET_L2_IEEE802154_SHELL
|
Enable IEEE 802.15.4 shell module |
CONFIG_NET_L2_IEEE802154_SUB_GHZ
|
|
CONFIG_NET_L2_IPIP
|
Enable IP-to-IP tunneling support |
CONFIG_NET_L2_IPIP_LOG_LEVEL
|
|
CONFIG_NET_L2_IPIP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_IPIP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_IPIP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_IPIP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_IPIP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_IPIP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_IPIP_TUNNEL_COUNT
|
Max number of IPIP tunnels |
CONFIG_NET_L2_IPIP_TXRX_DEBUG
|
Debug received and sent packets |
CONFIG_NET_L2_OPENTHREAD
|
OpenThread L2 |
CONFIG_NET_L2_PPP
|
Enable point-to-point (PPP) support [EXPERIMENTAL] |
CONFIG_NET_L2_PPP_AUTH_SUPPORT
|
|
CONFIG_NET_L2_PPP_DELAY_STARTUP_MS
|
PPP delay startup ms |
CONFIG_NET_L2_PPP_LOG_LEVEL
|
|
CONFIG_NET_L2_PPP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_PPP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_PPP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_PPP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_PPP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_PPP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_PPP_MAX_CONFIGURE_REQ_RETRANSMITS
|
Maximum number of Configure-Req retransmits |
CONFIG_NET_L2_PPP_MAX_NACK_LOOPS
|
Maximum number of NACK loops accepted |
CONFIG_NET_L2_PPP_MAX_TERMINATE_REQ_RETRANSMITS
|
Maximum number of Terminate-Req retransmits |
CONFIG_NET_L2_PPP_MGMT
|
Enable ppp network management interface |
CONFIG_NET_L2_PPP_OPTION_DNS_USE
|
Use negotiated DNS servers |
CONFIG_NET_L2_PPP_OPTION_MRU
|
LCP MRU option support |
CONFIG_NET_L2_PPP_OPTION_SERVE_DNS
|
Serve DNS addresses to peer |
CONFIG_NET_L2_PPP_OPTION_SERVE_IP
|
Serve IP address to peer |
CONFIG_NET_L2_PPP_PAP
|
PAP authentication protocol |
CONFIG_NET_L2_PPP_TIMEOUT
|
Maximum timeout in ms for Configure-Req |
CONFIG_NET_L2_PPP_TX_STACK_SIZE
|
Stack size for TX handler |
CONFIG_NET_L2_VIRTUAL
|
Enable virtual L2 support |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL
|
|
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_VIRTUAL_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_VIRTUAL_MAX_NAME_LEN
|
Max length of the virtual L2 layer name |
CONFIG_NET_L2_VIRTUAL_MGMT
|
Enable virtual interface network management interface |
CONFIG_NET_L2_WIFI_MGMT
|
Enable Wi-Fi Management support |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL
|
|
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_INF
|
Info |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_L2_WIFI_MGMT_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_L2_WIFI_SHELL
|
Enable Wi-Fi shell module |
CONFIG_NET_L2_ZIGBEE
|
Zigbee L2 |
CONFIG_NET_LLDP
|
Enable Link Layer Discovery Protocol (LLDP) |
CONFIG_NET_LLDP_CHASSIS_ID
|
Chassis ID value |
CONFIG_NET_LLDP_CHASSIS_ID_MAC0
|
Chassis ID MAC Address Byte 0 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC1
|
Chassis ID MAC Address Byte 1 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC2
|
Chassis ID MAC Address Byte 2 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC3
|
Chassis ID MAC Address Byte 3 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC4
|
Chassis ID MAC Address Byte 4 |
CONFIG_NET_LLDP_CHASSIS_ID_MAC5
|
Chassis ID MAC Address Byte 5 |
CONFIG_NET_LLDP_CHASSIS_ID_SUBTYPE
|
Chassis ID TLV subtype |
CONFIG_NET_LLDP_END_LLDPDU_TLV_ENABLED
|
Enable End of LLDPDU TLV |
CONFIG_NET_LLDP_LOG_LEVEL
|
|
CONFIG_NET_LLDP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_LLDP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_LLDP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_LLDP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_LLDP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_LLDP_PORT_ID
|
Port ID value |
CONFIG_NET_LLDP_PORT_ID_MAC0
|
Chassis ID MAC Address Byte 0 |
CONFIG_NET_LLDP_PORT_ID_MAC1
|
Chassis ID MAC Address Byte 1 |
CONFIG_NET_LLDP_PORT_ID_MAC2
|
Chassis ID MAC Address Byte 2 |
CONFIG_NET_LLDP_PORT_ID_MAC3
|
Chassis ID MAC Address Byte 3 |
CONFIG_NET_LLDP_PORT_ID_MAC4
|
Chassis ID MAC Address Byte 4 |
CONFIG_NET_LLDP_PORT_ID_MAC5
|
Chassis ID MAC Address Byte 5 |
CONFIG_NET_LLDP_PORT_ID_SUBTYPE
|
Port ID TLV subtype |
CONFIG_NET_LLDP_TX_HOLD
|
Multiplier of Tx Interval to result on Time to Live value |
CONFIG_NET_LLDP_TX_INTERVAL
|
Time between transmissions in seconds (msgTxInterval) |
CONFIG_NET_LOG
|
Enable network stack logging and debugging |
CONFIG_NET_LOOPBACK
|
Net loopback driver |
CONFIG_NET_LOOPBACK_LOG_LEVEL
|
|
CONFIG_NET_LOOPBACK_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_LOOPBACK_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_LOOPBACK_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_LOOPBACK_LOG_LEVEL_INF
|
Info |
CONFIG_NET_LOOPBACK_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_LOOPBACK_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_MAX_6LO_CONTEXTS
|
Number of supported 6CO (6lowpan contexts options) |
CONFIG_NET_MAX_CONN
|
How many network connections are supported |
CONFIG_NET_MAX_CONTEXTS
|
Number of network contexts to allocate |
CONFIG_NET_MAX_MCAST_ROUTES
|
Max number of multicast routing entries stored. |
CONFIG_NET_MAX_NEXTHOPS
|
Max number of next hop entries stored. |
CONFIG_NET_MAX_ROUTERS
|
How many routers are supported |
CONFIG_NET_MAX_ROUTES
|
Max number of routing entries stored. |
CONFIG_NET_MGMT
|
Network Management API |
CONFIG_NET_MGMT_EVENT
|
Add support for runtime network event notifications |
CONFIG_NET_MGMT_EVENT_INFO
|
Enable passing information along with an event |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL
|
|
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_INF
|
Info |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_MGMT_EVENT_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_MGMT_EVENT_MONITOR
|
Monitor network events from net shell |
CONFIG_NET_MGMT_EVENT_MONITOR_AUTO_START
|
Start the event monitor automatically at boot |
CONFIG_NET_MGMT_EVENT_QUEUE_SIZE
|
Size of event queue |
CONFIG_NET_MGMT_EVENT_STACK_SIZE
|
Stack size for the inner thread handling event callbacks |
CONFIG_NET_NATIVE
|
Enable native IP stack |
CONFIG_NET_NATIVE_IPV4
|
|
CONFIG_NET_NATIVE_IPV6
|
|
CONFIG_NET_NATIVE_TCP
|
|
CONFIG_NET_NATIVE_UDP
|
|
CONFIG_NET_OFFLOAD
|
Offload IP stack [EXPERIMENTAL] |
CONFIG_NET_OFFLOAD_LOG_LEVEL
|
|
CONFIG_NET_OFFLOAD_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_OFFLOAD_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_OFFLOAD_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_OFFLOAD_LOG_LEVEL_INF
|
Info |
CONFIG_NET_OFFLOAD_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_OFFLOAD_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_PKT_LOG_LEVEL
|
|
CONFIG_NET_PKT_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_PKT_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_PKT_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_PKT_LOG_LEVEL_INF
|
Info |
CONFIG_NET_PKT_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_PKT_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_PKT_RXTIME_STATS
|
Enable network packet RX time statistics |
CONFIG_NET_PKT_RXTIME_STATS_DETAIL
|
Get extra receive detail statistics in RX path |
CONFIG_NET_PKT_RX_COUNT
|
How many packet receives can be pending at the same time |
CONFIG_NET_PKT_TIMESTAMP
|
Enable network packet timestamp support |
CONFIG_NET_PKT_TIMESTAMP_STACK_SIZE
|
Timestamp thread stack size |
CONFIG_NET_PKT_TIMESTAMP_THREAD
|
Create TX timestamp thread |
CONFIG_NET_PKT_TXTIME
|
Enable network packet TX time support |
CONFIG_NET_PKT_TXTIME_STATS
|
Enable network packet TX time statistics |
CONFIG_NET_PKT_TXTIME_STATS_DETAIL
|
Get extra transmit detail statistics in TX path |
CONFIG_NET_PKT_TX_COUNT
|
How many packet sends can be pending at the same time |
CONFIG_NET_POWER_MANAGEMENT
|
|
CONFIG_NET_PPP
|
Point-to-point (PPP) UART based driver |
CONFIG_NET_PPP_DRV_NAME
|
PPP Driver name |
CONFIG_NET_PPP_LOG_LEVEL
|
|
CONFIG_NET_PPP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_PPP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_PPP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_PPP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_PPP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_PPP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_PPP_MTU_MRU
|
PPP MTU and MRU |
CONFIG_NET_PPP_RINGBUF_SIZE
|
PPP ring buffer size |
CONFIG_NET_PPP_RX_PRIORITY
|
RX workqueue thread priority |
CONFIG_NET_PPP_RX_STACK_SIZE
|
Size of the stack allocated for receiving data from modem |
CONFIG_NET_PPP_UART_BUF_LEN
|
Buffer length when reading from UART |
CONFIG_NET_PPP_UART_NAME
|
UART device name the PPP is connected to |
CONFIG_NET_PPP_VERIFY_FCS
|
Verify that received FCS is valid |
CONFIG_NET_PROMISCUOUS_MODE
|
Enable promiscuous mode support [EXPERIMENTAL] |
CONFIG_NET_PROMISC_LOG_LEVEL
|
|
CONFIG_NET_PROMISC_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_PROMISC_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_PROMISC_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_PROMISC_LOG_LEVEL_INF
|
Info |
CONFIG_NET_PROMISC_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_PROMISC_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_QEMU_ETHERNET
|
Ethernet |
CONFIG_NET_QEMU_PPP
|
PPP |
CONFIG_NET_QEMU_SLIP
|
SLIP |
CONFIG_NET_QEMU_USER
|
SLIRP |
CONFIG_NET_QEMU_USER_EXTRA_ARGS
|
Qemu User Networking Args |
CONFIG_NET_RAW_MODE
|
|
CONFIG_NET_ROUTE
|
|
CONFIG_NET_ROUTE_LOG_LEVEL
|
|
CONFIG_NET_ROUTE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_ROUTE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_ROUTE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_ROUTE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_ROUTE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_ROUTE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_ROUTE_MCAST
|
Enable Multicast Routing / Forwarding |
CONFIG_NET_ROUTING
|
|
CONFIG_NET_RX_DEFAULT_PRIORITY
|
Default network RX packet priority if none have been set |
CONFIG_NET_RX_STACK_SIZE
|
RX thread stack size |
CONFIG_NET_SHELL
|
Enable network shell utilities |
CONFIG_NET_SHELL_DYN_CMD_COMPLETION
|
Enable network shell dynamic command completion |
CONFIG_NET_SLIP_TAP
|
TAP SLIP driver |
CONFIG_NET_SOCKETPAIR
|
Support for the socketpair syscall [EXPERIMENTAL] |
CONFIG_NET_SOCKETPAIR_BUFFER_SIZE
|
Size of the intermediate buffer, in bytes |
CONFIG_NET_SOCKETS
|
BSD Sockets compatible API |
CONFIG_NET_SOCKETS_CAN
|
Enable socket CAN support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_CAN_RECEIVERS
|
How many simultaneous SocketCAN receivers are allowed |
CONFIG_NET_SOCKETS_CONNECT_TIMEOUT
|
Timeout value in milliseconds to CONNECT |
CONFIG_NET_SOCKETS_DNS_TIMEOUT
|
Timeout value in milliseconds for DNS queries |
CONFIG_NET_SOCKETS_DTLS_TIMEOUT
|
Timeout value in milliseconds for DTLS connection |
CONFIG_NET_SOCKETS_ENABLE_DTLS
|
Enable DTLS socket support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_LOG_LEVEL
|
|
CONFIG_NET_SOCKETS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_SOCKETS_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_SOCKETS_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_SOCKETS_LOG_LEVEL_INF
|
Info |
CONFIG_NET_SOCKETS_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_SOCKETS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_SOCKETS_NET_MGMT
|
Enable network management socket support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_NET_MGMT_MAX_LISTENERS
|
Max number of sockets to listen |
CONFIG_NET_SOCKETS_OFFLOAD
|
Offload Socket APIs [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_OFFLOAD_TLS
|
Offload TLS socket calls to the offloaded sockets |
CONFIG_NET_SOCKETS_PACKET
|
Enable packet socket support |
CONFIG_NET_SOCKETS_PACKET_DGRAM
|
Enable packet socket SOCK_DGRAM support |
CONFIG_NET_SOCKETS_POLL_MAX
|
Max number of supported poll() entries |
CONFIG_NET_SOCKETS_POSIX_NAMES
|
POSIX names for Sockets API (without full POSIX API) |
CONFIG_NET_SOCKETS_SOCKOPT_TLS
|
Enable TCP TLS socket option support [EXPERIMENTAL] |
CONFIG_NET_SOCKETS_TLS_MAX_APP_PROTOCOLS
|
Maximum number of supported application layer protocols |
CONFIG_NET_SOCKETS_TLS_MAX_CIPHERSUITES
|
Maximum number of TLS/DTLS ciphersuites per socket |
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS
|
Maximum number of TLS/DTLS contexts |
CONFIG_NET_SOCKETS_TLS_MAX_CREDENTIALS
|
Maximum number of TLS/DTLS credentials per socket |
CONFIG_NET_SOCKETS_TLS_SET_MAX_FRAGMENT_LENGTH
|
Set Maximum Fragment Length (MFL) |
CONFIG_NET_STATISTICS
|
Network statistics |
CONFIG_NET_STATISTICS_ETHERNET
|
Ethernet statistics |
CONFIG_NET_STATISTICS_ETHERNET_VENDOR
|
Vendor specific Ethernet statistics |
CONFIG_NET_STATISTICS_ICMP
|
ICMP statistics |
CONFIG_NET_STATISTICS_IGMP
|
Internet Group Management Protocol (IGMP) statistics |
CONFIG_NET_STATISTICS_IPV4
|
IPv4 statistics |
CONFIG_NET_STATISTICS_IPV6
|
IPv6 statistics |
CONFIG_NET_STATISTICS_IPV6_ND
|
IPv6 statistics |
CONFIG_NET_STATISTICS_LOG_LEVEL
|
|
CONFIG_NET_STATISTICS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_STATISTICS_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_STATISTICS_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_STATISTICS_LOG_LEVEL_INF
|
Info |
CONFIG_NET_STATISTICS_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_STATISTICS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_STATISTICS_MLD
|
Multicast Listener Discovery (MLD) statistics |
CONFIG_NET_STATISTICS_PERIODIC_OUTPUT
|
Simple periodic output |
CONFIG_NET_STATISTICS_PER_INTERFACE
|
Collect statistics per network interface |
CONFIG_NET_STATISTICS_POWER_MANAGEMENT
|
Power management statistics |
CONFIG_NET_STATISTICS_PPP
|
Point-to-point (PPP) statistics |
CONFIG_NET_STATISTICS_TCP
|
TCP statistics |
CONFIG_NET_STATISTICS_UDP
|
UDP statistics |
CONFIG_NET_STATISTICS_USER_API
|
Expose statistics through NET MGMT API |
CONFIG_NET_TCP
|
Enable TCP |
CONFIG_NET_TCP2
|
|
CONFIG_NET_TCP_ACK_TIMEOUT
|
How long to wait for ACK (in milliseconds) |
CONFIG_NET_TCP_BACKLOG_SIZE
|
Number of simultaneous incoming TCP connections |
CONFIG_NET_TCP_CHECKSUM
|
Check TCP checksum |
CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT
|
Initial value of Retransmission Timeout (RTO) (in milliseconds) |
CONFIG_NET_TCP_ISN_RFC6528
|
Use ISN algorithm from RFC 6528 |
CONFIG_NET_TCP_LOG_LEVEL
|
|
CONFIG_NET_TCP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_TCP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_TCP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_TCP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_TCP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_TCP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_TCP_MAX_SEND_WINDOW_SIZE
|
Maximum sending window size to use |
CONFIG_NET_TCP_RECV_QUEUE_TIMEOUT
|
How long to queue received data (in ms) |
CONFIG_NET_TCP_RETRY_COUNT
|
Maximum number of TCP segment retransmissions |
CONFIG_NET_TCP_TIME_WAIT_DELAY
|
How long to wait in TIME_WAIT state (in milliseconds) |
CONFIG_NET_TCP_WORKQ_STACK_SIZE
|
TCP work queue thread stack size |
CONFIG_NET_TC_LOG_LEVEL
|
|
CONFIG_NET_TC_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_TC_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_TC_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_TC_LOG_LEVEL_INF
|
Info |
CONFIG_NET_TC_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_TC_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_TC_MAPPING_SR_CLASS_A_AND_B
|
SR class A and class B mapping |
CONFIG_NET_TC_MAPPING_SR_CLASS_B_ONLY
|
SR class B only mapping |
CONFIG_NET_TC_MAPPING_STRICT
|
Strict priority mapping |
CONFIG_NET_TC_NUM_PRIORITIES
|
|
CONFIG_NET_TC_RX_COUNT
|
How many Rx traffic classes to have for each network device |
CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO
|
Push high priority packets directly to network driver |
CONFIG_NET_TC_THREAD_COOPERATIVE
|
Use co-operative TX/RX threads |
CONFIG_NET_TC_THREAD_PREEMPTIVE
|
Use pre-emptive TX/RX threads [EXPERIMENTAL] |
CONFIG_NET_TC_TX_COUNT
|
How many Tx traffic classes to have for each network device |
CONFIG_NET_TEST
|
Network Testing |
CONFIG_NET_TEST_PROTOCOL
|
Enable JSON based test protocol (UDP) |
CONFIG_NET_TRICKLE
|
Enable Trickle library |
CONFIG_NET_TRICKLE_LOG_LEVEL
|
|
CONFIG_NET_TRICKLE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_TRICKLE_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_TRICKLE_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_TRICKLE_LOG_LEVEL_INF
|
Info |
CONFIG_NET_TRICKLE_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_TRICKLE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_TX_DEFAULT_PRIORITY
|
Default network TX packet priority if none have been set |
CONFIG_NET_TX_STACK_SIZE
|
TX thread stack size |
CONFIG_NET_UDP
|
Enable UDP |
CONFIG_NET_UDP_CHECKSUM
|
Check UDP checksum |
CONFIG_NET_UDP_LOG_LEVEL
|
|
CONFIG_NET_UDP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_UDP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_UDP_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_UDP_LOG_LEVEL_INF
|
Info |
CONFIG_NET_UDP_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_UDP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_UDP_MISSING_CHECKSUM
|
Accept missing checksum (IPv4 only) |
CONFIG_NET_UTILS_LOG_LEVEL
|
|
CONFIG_NET_UTILS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_UTILS_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_UTILS_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_UTILS_LOG_LEVEL_INF
|
Info |
CONFIG_NET_UTILS_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_UTILS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NET_VLAN
|
Enable virtual lan support |
CONFIG_NET_VLAN_COUNT
|
Max VLAN tags supported in the system |
CONFIG_NET_WEBSOCKET_LOG_LEVEL
|
|
CONFIG_NET_WEBSOCKET_LOG_LEVEL_DBG
|
Debug |
CONFIG_NET_WEBSOCKET_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_NET_WEBSOCKET_LOG_LEVEL_ERR
|
Error |
CONFIG_NET_WEBSOCKET_LOG_LEVEL_INF
|
Info |
CONFIG_NET_WEBSOCKET_LOG_LEVEL_OFF
|
Off |
CONFIG_NET_WEBSOCKET_LOG_LEVEL_WRN
|
Warning |
CONFIG_NEURAL_NET_ACCEL
|
Neural Network Accelerator Drivers |
CONFIG_NEURAL_NET_LOG_LEVEL
|
|
CONFIG_NEURAL_NET_LOG_LEVEL_DBG
|
Debug |
CONFIG_NEURAL_NET_LOG_LEVEL_ERR
|
Error |
CONFIG_NEURAL_NET_LOG_LEVEL_INF
|
Info |
CONFIG_NEURAL_NET_LOG_LEVEL_OFF
|
Off |
CONFIG_NEURAL_NET_LOG_LEVEL_WRN
|
Warning |
CONFIG_NEWLIB_LIBC
|
Newlib C library |
CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE
|
Newlib aligned heap size |
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF
|
Build with newlib float printf |
CONFIG_NEWLIB_LIBC_FLOAT_SCANF
|
Build with newlib float scanf |
CONFIG_NEWLIB_LIBC_MAX_MAPPED_REGION_SIZE
|
Maximum memory mapped for newlib heap |
CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
|
Newlib minimum required heap size |
CONFIG_NEWLIB_LIBC_NANO
|
Build with newlib-nano C library |
CONFIG_NFCT_PINS_AS_GPIOS
|
NFCT pins as GPIOs |
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL
|
|
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_NDEF_CH_REC_PARSER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL
|
|
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_NDEF_LE_OOB_REC_PARSER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL
|
|
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_NDEF_PARSER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_PLATFORM_LOG_LEVEL
|
|
CONFIG_NFC_PLATFORM_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_PLATFORM_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_PLATFORM_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_PLATFORM_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_PLATFORM_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_T2T_PARSER_LOG_LEVEL
|
|
CONFIG_NFC_T2T_PARSER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_T2T_PARSER_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_T2T_PARSER_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_T2T_PARSER_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_T2T_PARSER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_T4T_APDU_LOG_LEVEL
|
|
CONFIG_NFC_T4T_APDU_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_T4T_APDU_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_T4T_APDU_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_T4T_APDU_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_T4T_APDU_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL
|
|
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_T4T_CC_FILE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL
|
|
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_T4T_HL_PROCEDURE_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL
|
|
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_T4T_ISODEP_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_TNEP_CH_LOG_LEVEL
|
|
CONFIG_NFC_TNEP_CH_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_TNEP_CH_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_TNEP_CH_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_TNEP_CH_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_TNEP_CH_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL
|
|
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_TNEP_POLLER_LOG_LEVEL_WRN
|
Warning |
CONFIG_NFC_TNEP_TAG_LOG_LEVEL
|
|
CONFIG_NFC_TNEP_TAG_LOG_LEVEL_DBG
|
Debug |
CONFIG_NFC_TNEP_TAG_LOG_LEVEL_ERR
|
Error |
CONFIG_NFC_TNEP_TAG_LOG_LEVEL_INF
|
Info |
CONFIG_NFC_TNEP_TAG_LOG_LEVEL_OFF
|
Off |
CONFIG_NFC_TNEP_TAG_LOG_LEVEL_WRN
|
Warning |
CONFIG_NIOS2
|
|
CONFIG_NOCACHE_MEMORY
|
Support for uncached memory |
CONFIG_NORDIC_QSPI_NOR
|
QSPI NOR Flash |
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE
|
Page size to use for FLASH_LAYOUT feature |
CONFIG_NORDIC_QSPI_NOR_INIT_PRIORITY
|
|
CONFIG_NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE
|
Size of a stack-based buffer to support writes from NVMC |
CONFIG_NO_OPTIMIZATIONS
|
Optimize nothing |
CONFIG_NO_RUNTIME_CHECKS
|
No runtime error checks |
CONFIG_NO_UNUSED_STACK_INSPECTION
|
|
CONFIG_NPCX_HEADER
|
Enable the output binary with NPCX binary header |
CONFIG_NPCX_HEADER_CHIP
|
|
CONFIG_NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO
|
|
CONFIG_NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_1
|
NPCX SPI clock ratio 1 |
CONFIG_NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_2
|
NPCX SPI clock ratio 2 |
CONFIG_NPCX_HEADER_ENABLE_FIRMWARE_CRC
|
Enable firmware image crc check |
CONFIG_NPCX_HEADER_ENABLE_HEADER_CRC
|
Enable header crc check |
CONFIG_NPCX_HEADER_FLASH_SIZE
|
|
CONFIG_NPCX_HEADER_FLASH_SIZE_0P5M_1M
|
SPI flash size 0.5M or 1M Bytes |
CONFIG_NPCX_HEADER_FLASH_SIZE_16M
|
SPI flash size 16M Bytes |
CONFIG_NPCX_HEADER_FLASH_SIZE_2M
|
SPI flash size 2M Bytes |
CONFIG_NPCX_HEADER_FLASH_SIZE_4M
|
SPI flash size 4M Bytes |
CONFIG_NPCX_HEADER_FLASH_SIZE_8M
|
SPI flash size 8M Bytes |
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK
|
|
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK_20
|
SPI flash max clock rate of 20 MHz |
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK_25
|
SPI flash max clock rate of 25 MHz |
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK_33
|
SPI flash max clock rate of 33 MHz |
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK_40
|
SPI flash max clock rate of 40 MHz |
CONFIG_NPCX_HEADER_SPI_MAX_CLOCK_50
|
SPI flash max clock rate of 50 MHz |
CONFIG_NPCX_HEADER_SPI_READ_MODE
|
|
CONFIG_NPCX_HEADER_SPI_READ_MODE_DUAL
|
SPI flash operates with dual reading mode |
CONFIG_NPCX_HEADER_SPI_READ_MODE_FAST
|
SPI flash operates with fast reading mode |
CONFIG_NPCX_HEADER_SPI_READ_MODE_NORMAL
|
SPI flash operates with normal reading mode |
CONFIG_NPCX_HEADER_SPI_READ_MODE_QUAD
|
SPI flash operates with quad reading mode |
CONFIG_NPCX_IMAGE_OUTPUT_BIN
|
Build npcx binary in BIN format |
CONFIG_NPCX_IMAGE_OUTPUT_HEX
|
Build npcx binary in HEX format |
CONFIG_NPCX_ITIM_TIMER
|
Nuvoton NPCX series internal 64/32-bit timers |
CONFIG_NPCX_MIWU
|
Nuvoton NPCX embedded controller (EC) miwu driver |
CONFIG_NRF52_ANOMALY_132_DELAY_US
|
Anomaly 132 workaround delay (microseconds) |
CONFIG_NRF52_ANOMALY_132_WORKAROUND
|
|
CONFIG_NRF9160_GPS_LOG_LEVEL
|
|
CONFIG_NRF9160_GPS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF9160_GPS_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF9160_GPS_LOG_LEVEL_INF
|
Info |
CONFIG_NRF9160_GPS_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF9160_GPS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRFX_ADC
|
Enable ADC driver |
CONFIG_NRFX_CLOCK
|
Enable CLOCK driver |
CONFIG_NRFX_CLOCK_LFXO_TWO_STAGE_ENABLED
|
Enable two stage start sequence of the low frequency clock |
CONFIG_NRFX_COMP
|
Enable COMP driver |
CONFIG_NRFX_DPPI
|
Enable DPPI allocator |
CONFIG_NRFX_EGU
|
Enable EGU driver |
CONFIG_NRFX_EGU0
|
Enable EGU0 instance |
CONFIG_NRFX_EGU1
|
Enable EGU1 instance |
CONFIG_NRFX_EGU2
|
Enable EGU2 instance |
CONFIG_NRFX_EGU3
|
Enable EGU3 instance |
CONFIG_NRFX_EGU4
|
Enable EGU4 instance |
CONFIG_NRFX_EGU5
|
Enable EGU5 instance |
CONFIG_NRFX_GPIOTE
|
Enable GPIOTE driver |
CONFIG_NRFX_I2S
|
Enable I2S driver |
CONFIG_NRFX_IPC
|
Enable IPC driver |
CONFIG_NRFX_LPCOMP
|
Enable LPCOMP driver |
CONFIG_NRFX_NFCT
|
Enable NFCT driver |
CONFIG_NRFX_NVMC
|
Enable NVMC driver |
CONFIG_NRFX_PDM
|
Enable PDM driver |
CONFIG_NRFX_POWER
|
Enable POWER driver |
CONFIG_NRFX_PPI
|
Enable PPI allocator |
CONFIG_NRFX_PRS
|
Enable Peripheral Resource Sharing module |
CONFIG_NRFX_PRS_BOX_0
|
Enable PRS box 0 |
CONFIG_NRFX_PRS_BOX_1
|
Enable PRS box 1 |
CONFIG_NRFX_PRS_BOX_2
|
Enable PRS box 2 |
CONFIG_NRFX_PRS_BOX_3
|
Enable PRS box 3 |
CONFIG_NRFX_PRS_BOX_4
|
Enable PRS box 4 |
CONFIG_NRFX_PWM
|
Enable PWM driver |
CONFIG_NRFX_PWM0
|
Enable PWM0 instance |
CONFIG_NRFX_PWM1
|
Enable PWM1 instance |
CONFIG_NRFX_PWM2
|
Enable PWM2 instance |
CONFIG_NRFX_PWM3
|
Enable PWM3 instance |
CONFIG_NRFX_QDEC
|
Enable QDEC driver |
CONFIG_NRFX_QSPI
|
Enable QSPI driver |
CONFIG_NRFX_RNG
|
Enable RNG driver |
CONFIG_NRFX_RTC
|
Enable RTC driver |
CONFIG_NRFX_RTC0
|
Enable RTC0 instance |
CONFIG_NRFX_RTC1
|
Enable RTC1 instance |
CONFIG_NRFX_RTC2
|
Enable RTC2 instance |
CONFIG_NRFX_SAADC
|
Enable SAADC driver |
CONFIG_NRFX_SPI
|
Enable SPI driver |
CONFIG_NRFX_SPI0
|
Enable SPI0 instance |
CONFIG_NRFX_SPI1
|
Enable SPI1 instance |
CONFIG_NRFX_SPI2
|
Enable SPI2 instance |
CONFIG_NRFX_SPIM
|
Enable SPIM driver |
CONFIG_NRFX_SPIM0
|
Enable SPIM0 instance |
CONFIG_NRFX_SPIM1
|
Enable SPIM1 instance |
CONFIG_NRFX_SPIM2
|
Enable SPIM2 instance |
CONFIG_NRFX_SPIM3
|
Enable SPIM3 instance |
CONFIG_NRFX_SPIM4
|
Enable SPIM4 instance |
CONFIG_NRFX_SPIS
|
Enable SPIS driver |
CONFIG_NRFX_SPIS0
|
Enable SPIS0 instance |
CONFIG_NRFX_SPIS1
|
Enable SPIS1 instance |
CONFIG_NRFX_SPIS2
|
Enable SPIS2 instance |
CONFIG_NRFX_SPIS3
|
Enable SPIS3 instance |
CONFIG_NRFX_SYSTICK
|
Enable SYSTICK driver |
CONFIG_NRFX_TEMP
|
Enable TEMP driver |
CONFIG_NRFX_TIMER
|
Enable TIMER driver |
CONFIG_NRFX_TIMER0
|
Enable TIMER0 instance |
CONFIG_NRFX_TIMER1
|
Enable TIMER1 instance |
CONFIG_NRFX_TIMER2
|
Enable TIMER2 instance |
CONFIG_NRFX_TIMER3
|
Enable TIMER3 instance |
CONFIG_NRFX_TIMER4
|
Enable TIMER4 instance |
CONFIG_NRFX_TWI
|
Enable TWI driver |
CONFIG_NRFX_TWI0
|
Enable TWI0 instance |
CONFIG_NRFX_TWI1
|
Enable TWI1 instance |
CONFIG_NRFX_TWIM
|
Enable TWIM driver |
CONFIG_NRFX_TWIM0
|
Enable TWIM0 instance |
CONFIG_NRFX_TWIM1
|
Enable TWIM1 instance |
CONFIG_NRFX_TWIM2
|
Enable TWIM2 instance |
CONFIG_NRFX_TWIM3
|
Enable TWIM3 instance |
CONFIG_NRFX_TWIS
|
Enable TWIS driver |
CONFIG_NRFX_TWIS0
|
Enable TWIS0 instance |
CONFIG_NRFX_TWIS1
|
Enable TWIS1 instance |
CONFIG_NRFX_TWIS2
|
Enable TWIS2 instance |
CONFIG_NRFX_TWIS3
|
Enable TWIS3 instance |
CONFIG_NRFX_UART
|
Enable UART driver |
CONFIG_NRFX_UART0
|
Enable UART0 instance |
CONFIG_NRFX_UARTE
|
Enable UARTE driver |
CONFIG_NRFX_UARTE0
|
Enable UARTE0 instance |
CONFIG_NRFX_UARTE1
|
Enable UARTE1 instance |
CONFIG_NRFX_UARTE2
|
Enable UARTE2 instance |
CONFIG_NRFX_UARTE3
|
Enable UARTE3 instance |
CONFIG_NRFX_USBD
|
Enable USBD driver |
CONFIG_NRFX_USBREG
|
Enable USBREG driver |
CONFIG_NRFX_WDT
|
Enable WDT driver |
CONFIG_NRFX_WDT0
|
Enable WDT0 instance |
CONFIG_NRFX_WDT1
|
Enable WDT1 instance |
CONFIG_NRF_802154_CCA_CORR_LIMIT
|
nRF IEEE 802.15.4 CCA Correlator limit |
CONFIG_NRF_802154_CCA_CORR_THRESHOLD
|
nRF IEEE 802.15.4 CCA Correlator threshold |
CONFIG_NRF_802154_CCA_ED_THRESHOLD
|
nRF IEEE 802.15.4 CCA Energy Detection threshold |
CONFIG_NRF_802154_CCA_MODE_CARRIER
|
Carrier Seen |
CONFIG_NRF_802154_CCA_MODE_CARRIER_AND_ED
|
Energy Above Threshold AND Carrier Seen |
CONFIG_NRF_802154_CCA_MODE_CARRIER_OR_ED
|
Energy Above Threshold OR Carrier Seen |
CONFIG_NRF_802154_CCA_MODE_ED
|
Energy Above Threshold |
CONFIG_NRF_802154_ENCRYPTION
|
nRF 802.15.4 AES-CCM* authentication & encryption |
CONFIG_NRF_802154_MULTIPROTOCOL_SUPPORT
|
|
CONFIG_NRF_802154_PENDING_EXTENDED_ADDRESSES
|
nRF 802.15.4 pending extended addresses |
CONFIG_NRF_802154_PENDING_SHORT_ADDRESSES
|
nRF 802.15.4 pending short addresses |
CONFIG_NRF_802154_RADIO_DRIVER
|
Enable nRF IEEE 802.15.4 radio driver |
CONFIG_NRF_802154_RX_BUFFERS
|
nRF 802.15.4 receive buffers |
CONFIG_NRF_802154_SERIALIZATION
|
|
CONFIG_NRF_802154_SER_DEFAULT_RESPONSE_TIMEOUT
|
Default Spinel serialization response timeout in milliseconds |
CONFIG_NRF_802154_SER_HOST
|
nRF IEEE 802.15.4 Driver serialization host |
CONFIG_NRF_802154_SER_LOG
|
802.15.4 serialization logs |
CONFIG_NRF_802154_SER_RADIO
|
nRF IEEE 802.15.4 Driver serialization radio |
CONFIG_NRF_802154_SER_RADIO_INIT_PRIO
|
nRF52 IEEE 802.15.4 serialization initialization priority |
CONFIG_NRF_802154_SL_OPENSOURCE
|
Open source |
CONFIG_NRF_802154_SOURCE_HAL_NORDIC
|
Open source |
CONFIG_NRF_802154_TEMPERATURE_UPDATE
|
nRF 802.15.4 temperature update |
CONFIG_NRF_802154_TEMPERATURE_UPDATE_INIT_PRIO
|
nRF52 IEEE 802.15.4 temperature update initialization priority |
CONFIG_NRF_802154_TEMPERATURE_UPDATE_PERIOD
|
nRF 802.15.4 temperature update period in milliseconds |
CONFIG_NRF_ACL_FLASH_REGION_SIZE
|
|
CONFIG_NRF_BPROT_FLASH_REGION_SIZE
|
|
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL
|
|
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_CLOUD_GPS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_CLOUD_LOG_LEVEL
|
|
CONFIG_NRF_CLOUD_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_CLOUD_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_CLOUD_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_CLOUD_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_CLOUD_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_CLOUD_REST_LOG_LEVEL
|
|
CONFIG_NRF_CLOUD_REST_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_CLOUD_REST_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_CLOUD_REST_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_CLOUD_REST_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_CLOUD_REST_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_ENABLE_CACHE
|
Enable cache |
CONFIG_NRF_ENABLE_ICACHE
|
Enable the instruction cache (I-Cache) |
CONFIG_NRF_HW_RTC0_RESERVED
|
|
CONFIG_NRF_HW_RTC1_RESERVED
|
|
CONFIG_NRF_HW_RTC2_RESERVED
|
|
CONFIG_NRF_HW_TIMER0_RESERVED
|
|
CONFIG_NRF_HW_TIMER1_RESERVED
|
|
CONFIG_NRF_HW_TIMER2_RESERVED
|
|
CONFIG_NRF_HW_TIMER3_RESERVED
|
|
CONFIG_NRF_HW_TIMER4_RESERVED
|
|
CONFIG_NRF_MODEM_LIB_LOG_LEVEL
|
|
CONFIG_NRF_MODEM_LIB_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_MODEM_LIB_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_MODEM_LIB_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_MODEM_LIB_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_MODEM_LIB_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_MPU_FLASH_REGION_SIZE
|
|
CONFIG_NRF_RPC_CBOR_LOG_LEVEL
|
|
CONFIG_NRF_RPC_CBOR_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_RPC_CBOR_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_RPC_CBOR_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_RPC_CBOR_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_RPC_CBOR_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_RPC_LOG_LEVEL
|
|
CONFIG_NRF_RPC_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_RPC_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_RPC_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_RPC_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_RPC_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_RPC_OS_LOG_LEVEL
|
|
CONFIG_NRF_RPC_OS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_RPC_OS_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_RPC_OS_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_RPC_OS_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_RPC_OS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_RPC_TR_LOG_LEVEL
|
|
CONFIG_NRF_RPC_TR_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_RPC_TR_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_RPC_TR_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_RPC_TR_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_RPC_TR_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_RTC_TIMER
|
nRF Real Time Counter (NRF_RTC1) Timer |
CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT
|
Additional channels that can be used |
CONFIG_NRF_SPU_FLASH_REGION_SIZE
|
|
CONFIG_NRF_SPU_RAM_REGION_SIZE
|
|
CONFIG_NRF_SW_LPUART_LOG_LEVEL
|
|
CONFIG_NRF_SW_LPUART_LOG_LEVEL_DBG
|
Debug |
CONFIG_NRF_SW_LPUART_LOG_LEVEL_ERR
|
Error |
CONFIG_NRF_SW_LPUART_LOG_LEVEL_INF
|
Info |
CONFIG_NRF_SW_LPUART_LOG_LEVEL_OFF
|
Off |
CONFIG_NRF_SW_LPUART_LOG_LEVEL_WRN
|
Warning |
CONFIG_NRF_TIMER_TIMER
|
nRF Timer Counter (NRF_TIMER0) Timer |
CONFIG_NRF_UARTE_PERIPHERAL
|
|
CONFIG_NRF_UART_PERIPHERAL
|
|
CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT
|
Use DWT for null pointer exception detection |
CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU
|
Use MPU for null pointer exception detection |
CONFIG_NULL_POINTER_EXCEPTION_DETECTION_NONE
|
Do not enable null pointer exception detection |
CONFIG_NUM_2ND_LEVEL_AGGREGATORS
|
Total number of second level interrupt aggregators |
CONFIG_NUM_3RD_LEVEL_AGGREGATORS
|
Total number of third level interrupt aggregators |
CONFIG_NUM_COOP_PRIORITIES
|
Number of coop priorities |
CONFIG_NUM_IRQS
|
Upper limit of interrupt numbers/IDs used |
CONFIG_NUM_IRQ_PRIO_LEVELS
|
Number of supported interrupt priority levels |
CONFIG_NUM_MBOX_ASYNC_MSGS
|
Maximum number of in-flight asynchronous mailbox messages |
CONFIG_NUM_METAIRQ_PRIORITIES
|
Number of very-high priority ‘preemptor’ threads |
CONFIG_NUM_PIPE_ASYNC_MSGS
|
Maximum number of in-flight asynchronous pipe messages |
CONFIG_NUM_PREEMPT_PRIORITIES
|
Number of preemptible priorities |
CONFIG_NVS
|
Non-volatile Storage |
CONFIG_NVS_LOG_LEVEL
|
|
CONFIG_NVS_LOG_LEVEL_DBG
|
Debug |
CONFIG_NVS_LOG_LEVEL_ERR
|
Error |
CONFIG_NVS_LOG_LEVEL_INF
|
Info |
CONFIG_NVS_LOG_LEVEL_OFF
|
Off |
CONFIG_NVS_LOG_LEVEL_WRN
|
Warning |
CONFIG_NXP_IMX_RT6XX_BOOT_HEADER
|
Enable the boot header |
CONFIG_NXP_IMX_RT_BOOT_HEADER
|
Enable the boot header |
CONFIG_OMIT_FRAME_POINTER
|
Omit frame pointer |
CONFIG_OPENAMP
|
OpenAMP Support |
CONFIG_OPENAMP_MASTER
|
OpenAMP Master Support |
CONFIG_OPENAMP_RSC_TABLE
|
coprocessor resource table |
CONFIG_OPENAMP_RSC_TABLE_NUM_RPMSG_BUFF
|
Resource table number of rpmsg buffers |
CONFIG_OPENAMP_SLAVE
|
OpenAMP Slave Support |
CONFIG_OPENAMP_SRC_PATH
|
OpenAMP library source path |
CONFIG_OPENOCD_SUPPORT
|
OpenOCD support (DEPRECATED) |
CONFIG_OPENTHREAD_BACKBONE_ROUTER
|
Enable Backbone Router functionality |
CONFIG_OPENTHREAD_BORDER_AGENT
|
Enable Border Agent support |
CONFIG_OPENTHREAD_BORDER_ROUTER
|
Enable Border Router support |
CONFIG_OPENTHREAD_CHANNEL
|
Default Channel |
CONFIG_OPENTHREAD_CHANNEL_MANAGER
|
Enable channel manager support |
CONFIG_OPENTHREAD_CHANNEL_MONITOR
|
Enable channel monitor support |
CONFIG_OPENTHREAD_CHILD_SUPERVISION
|
Enable child supervision support |
CONFIG_OPENTHREAD_CLI_MAX_LINE_LENGTH
|
The maximum size of the CLI line in bytes |
CONFIG_OPENTHREAD_CLI_TCP_ENABLE
|
Enable TCP in the CLI tool |
CONFIG_OPENTHREAD_COAP
|
Enable OpenThread CoAP support |
CONFIG_OPENTHREAD_COAPS
|
Enable Secure CoAP API support |
CONFIG_OPENTHREAD_COAP_BLOCK
|
Enable CoAP Block-wise option support |
CONFIG_OPENTHREAD_COAP_OBSERVE
|
Enable CoAP Observe option support |
CONFIG_OPENTHREAD_COMMISSIONER
|
Enable Commissioner functions support |
CONFIG_OPENTHREAD_CONFIG_PLATFORM_INFO
|
The platform-specific string to insert into the OpenThread version string |
CONFIG_OPENTHREAD_COPROCESSOR
|
OpenThread Co-Processor |
CONFIG_OPENTHREAD_COPROCESSOR_NCP
|
NCP - Network Co-Processor |
CONFIG_OPENTHREAD_COPROCESSOR_RCP
|
RCP - Radio Co-Processor |
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM
|
Run SPINEL over USB-ACM |
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME
|
UART device to use for Co-Processor SPINEL |
CONFIG_OPENTHREAD_COPROCESSOR_UART_RING_BUFFER_SIZE
|
Set Co-Processor UART ring buffer size |
CONFIG_OPENTHREAD_COPROCESSOR_VENDOR_HOOK_SOURCE
|
Path to vendor hook source file |
CONFIG_OPENTHREAD_CSL_AUTO_SYNC
|
Enable CSL autosync |
CONFIG_OPENTHREAD_CSL_MIN_RECEIVE_ON
|
Minimum CSL receive window |
CONFIG_OPENTHREAD_CSL_RECEIVER
|
Enable CSL Receiver support |
CONFIG_OPENTHREAD_CSL_RECEIVE_TIME_AHEAD
|
CSL receiver wake up margin in units of 10 symbols |
CONFIG_OPENTHREAD_CSL_SAMPLE_WINDOW
|
CSL sample window in units of 10 symbols |
CONFIG_OPENTHREAD_CUSTOM_PARAMETERS
|
Custom Parameters to pass to OpenThread build system |
CONFIG_OPENTHREAD_DEBUG
|
OpenThread stack logging support |
CONFIG_OPENTHREAD_DHCP6_CLIENT
|
Enable DHCPv6 client support |
CONFIG_OPENTHREAD_DHCP6_SERVER
|
Enable DHCPv6 server support |
CONFIG_OPENTHREAD_DIAG
|
Enable Diagnostic functions support |
CONFIG_OPENTHREAD_DNSSD_SERVER
|
Enable DNS-SD server support |
CONFIG_OPENTHREAD_DNS_CLIENT
|
Enable DNS client support |
CONFIG_OPENTHREAD_DUA
|
Enable Domain Unicast Address support |
CONFIG_OPENTHREAD_ECDSA
|
Enable ECDSA support |
CONFIG_OPENTHREAD_ENABLE_SERVICE
|
Enable Service support |
CONFIG_OPENTHREAD_EXTERNAL_HEAP
|
Enable external heap support |
CONFIG_OPENTHREAD_FTD
|
FTD - Full Thread Device |
CONFIG_OPENTHREAD_FULL_LOGS
|
Enable OpenThread full logs |
CONFIG_OPENTHREAD_HISTORY_TRACKER
|
Enable history tracker support |
CONFIG_OPENTHREAD_IP6_FRAGM
|
Enable IPv6 fragmentation support |
CONFIG_OPENTHREAD_IP6_MAX_EXT_MCAST_ADDRS
|
The maximum number of supported IPv6 multicast addresses allows to be externally added |
CONFIG_OPENTHREAD_IP6_MAX_EXT_UCAST_ADDRS
|
The maximum number of supported IPv6 addresses allows to be externally added |
CONFIG_OPENTHREAD_JAM_DETECTION
|
Enable Jam detection support |
CONFIG_OPENTHREAD_JOINER
|
Enable Joiner functions support |
CONFIG_OPENTHREAD_JOINER_AUTOSTART
|
Enable automatic joiner start |
CONFIG_OPENTHREAD_JOINER_PSKD
|
Default pre shared key for the Joiner |
CONFIG_OPENTHREAD_L2_DEBUG
|
OpenThread L2 log support |
CONFIG_OPENTHREAD_L2_DEBUG_DUMP_15_4
|
Dump 802.15.4 packets |
CONFIG_OPENTHREAD_L2_DEBUG_DUMP_IPV6
|
Dump IPv6 packets |
CONFIG_OPENTHREAD_L2_LOG_LEVEL
|
|
CONFIG_OPENTHREAD_L2_LOG_LEVEL_DBG
|
Debug |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_ERR
|
Error |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_INF
|
Info |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_OFF
|
Off |
CONFIG_OPENTHREAD_L2_LOG_LEVEL_WRN
|
Warning |
CONFIG_OPENTHREAD_LEGACY
|
Enable legacy network support |
CONFIG_OPENTHREAD_LINK_METRICS_INITIATOR
|
Enable Link Metrics initiator |
CONFIG_OPENTHREAD_LINK_METRICS_SUBJECT
|
Enable Link Metrics subject |
CONFIG_OPENTHREAD_LOG_LEVEL
|
|
CONFIG_OPENTHREAD_LOG_LEVEL_CRIT
|
Critical |
CONFIG_OPENTHREAD_LOG_LEVEL_DEBG
|
Debug |
CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC
|
Enable dynamic log level control |
CONFIG_OPENTHREAD_LOG_LEVEL_INFO
|
Informational |
CONFIG_OPENTHREAD_LOG_LEVEL_NOTE
|
Notice |
CONFIG_OPENTHREAD_LOG_LEVEL_WARN
|
Warning |
CONFIG_OPENTHREAD_LOG_PREPEND_LEVEL_ENABLE
|
Enable prepending the log level to all OpenThread log messages |
CONFIG_OPENTHREAD_MAC_FILTER
|
Enable MAC filter support |
CONFIG_OPENTHREAD_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
|
Enable software ACK timeout logic |
CONFIG_OPENTHREAD_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
|
Enable software CSMA backoff logic |
CONFIG_OPENTHREAD_MAC_SOFTWARE_RETRANSMIT_ENABLE
|
Enable software retransmission logic |
CONFIG_OPENTHREAD_MAC_SOFTWARE_TX_SECURITY_ENABLE
|
Enable software transmission security logic |
CONFIG_OPENTHREAD_MANUAL_START
|
Start OpenThread stack manually |
CONFIG_OPENTHREAD_MAX_CHILDREN
|
The maximum number of children |
CONFIG_OPENTHREAD_MAX_IP_ADDR_PER_CHILD
|
The maximum number of IPv6 address registrations per child |
CONFIG_OPENTHREAD_MAX_STATECHANGE_HANDLERS
|
The maximum number of state-changed callback handlers |
CONFIG_OPENTHREAD_MBEDTLS
|
|
CONFIG_OPENTHREAD_MBEDTLS_CHOICE
|
mbed TLS built-in |
CONFIG_OPENTHREAD_MBEDTLS_LIB_NAME
|
mbedtls lib name |
CONFIG_OPENTHREAD_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
|
Inform previous parent on reattach |
CONFIG_OPENTHREAD_MLE_LONG_ROUTES
|
Enable MLE long routes extension (experimental) |
CONFIG_OPENTHREAD_MLR
|
Enable Multicast Listener Registration support |
CONFIG_OPENTHREAD_MTD
|
MTD - Minimal Thread Device |
CONFIG_OPENTHREAD_MTD_NETDIAG
|
Enable TMF network diagnostics on MTDs |
CONFIG_OPENTHREAD_MTD_SED
|
SED - Sleepy End Device |
CONFIG_OPENTHREAD_MULTIPLE_INSTANCE
|
Enable OpenThread multiple instances |
CONFIG_OPENTHREAD_NEIGHBOR_DISCOVERY_AGENT
|
Enable neighbor discovery agent support |
CONFIG_OPENTHREAD_NETDATA_PUBLISHER
|
Enable Thread Network Data publisher |
CONFIG_OPENTHREAD_NETWORKKEY
|
Default Thread Network Key |
CONFIG_OPENTHREAD_NETWORK_NAME
|
Default network name |
CONFIG_OPENTHREAD_NUM_MESSAGE_BUFFERS
|
The number of message buffers in the buffer pool |
CONFIG_OPENTHREAD_OTNS
|
Enable OTNS support |
CONFIG_OPENTHREAD_PANID
|
Default PAN ID |
CONFIG_OPENTHREAD_PARENT_SEARCH
|
Enable periodic parent search support |
CONFIG_OPENTHREAD_PARENT_SEARCH_BACKOFF_INTERVAL
|
Backoff interval to prevent parent search retry in seconds |
CONFIG_OPENTHREAD_PARENT_SEARCH_CHECK_INTERVAL
|
Interval to trigger parent search in seconds |
CONFIG_OPENTHREAD_PARENT_SEARCH_RSS_THRESHOLD
|
RSSI threshold to trigger parent search |
CONFIG_OPENTHREAD_PING_SENDER
|
Enable ping sender support |
CONFIG_OPENTHREAD_PKT_LIST_SIZE
|
List size for IPv6 packet buffering |
CONFIG_OPENTHREAD_PLATFORM_INFO
|
Platform information for OpenThread |
CONFIG_OPENTHREAD_PLATFORM_NETIF
|
Enable platform netif support |
CONFIG_OPENTHREAD_PLATFORM_UDP
|
Enable platform UDP support |
CONFIG_OPENTHREAD_POLL_PERIOD
|
Poll period for sleepy end devices [ms] |
CONFIG_OPENTHREAD_RADIO_LINK_IEEE_802_15_4_ENABLE
|
Enable support for IEEE802.15.4 radio link |
CONFIG_OPENTHREAD_RADIO_LINK_TREL_ENABLE
|
Thread Radio Encapsulation Link (TREL) |
CONFIG_OPENTHREAD_RADIO_WORKQUEUE_STACK_SIZE
|
OpenThread radio transmit workqueue stack size |
CONFIG_OPENTHREAD_RAW
|
Enable raw Link support |
CONFIG_OPENTHREAD_REFERENCE_DEVICE
|
Enable Reference Device support |
CONFIG_OPENTHREAD_SECURITY_INTERNAL
|
|
CONFIG_OPENTHREAD_SETTINGS_RAM
|
Enable volatile-only storage of settings |
CONFIG_OPENTHREAD_SHELL
|
Enable OpenThread shell |
CONFIG_OPENTHREAD_SLAAC
|
Enable SLAAC support |
CONFIG_OPENTHREAD_SNTP_CLIENT
|
Enable SNTP Client support |
CONFIG_OPENTHREAD_SOURCES
|
OpenThread from sources |
CONFIG_OPENTHREAD_SRP_CLIENT
|
Enable SRP Client support |
CONFIG_OPENTHREAD_SRP_SERVER
|
Enable SRP Server support |
CONFIG_OPENTHREAD_TCP_ENABLE
|
Enable TCP |
CONFIG_OPENTHREAD_THREAD_PREEMPTIVE
|
Set Openthread thread to be preemptive |
CONFIG_OPENTHREAD_THREAD_PRIORITY
|
OpenThread thread priority |
CONFIG_OPENTHREAD_THREAD_STACK_SIZE
|
OpenThread thread stack size |
CONFIG_OPENTHREAD_THREAD_VERSION
|
|
CONFIG_OPENTHREAD_THREAD_VERSION_1_1
|
Version 1.1 |
CONFIG_OPENTHREAD_THREAD_VERSION_1_2
|
Version 1.2 |
CONFIG_OPENTHREAD_TIME_SYNC
|
Enable the time synchronization service feature |
CONFIG_OPENTHREAD_TMF_ADDRESS_CACHE_ENTRIES
|
The number of EID-to-RLOC cache entries |
CONFIG_OPENTHREAD_TREL
|
Enable TREL radio link for Thread over Infrastructure feature |
CONFIG_OPENTHREAD_UDP_FORWARD
|
Enable UDP forward support |
CONFIG_OPENTHREAD_XPANID
|
Default Extended PAN ID |
CONFIG_OPT3001
|
OPT3001 Light Sensor |
CONFIG_OSC_EXTERNAL
|
External reference clock |
CONFIG_OSC_HIGH_GAIN
|
High gain oscillator |
CONFIG_OSC_LOW_POWER
|
Low power oscillator |
CONFIG_OSC_XTAL0_FREQ
|
External oscillator frequency |
CONFIG_OSDP
|
Open Supervised Device Protocol (OSDP) driver |
CONFIG_OSDP_CMD_RETRY_WAIT_SEC
|
Retry wait time in seconds after a command error |
CONFIG_OSDP_CRYPTO_DRV_NAME
|
Crypto driver to use with OSDP |
CONFIG_OSDP_LOG_LEVEL
|
OSDP Logging Level |
CONFIG_OSDP_MASTER_KEY
|
Secure Channel Master Key |
CONFIG_OSDP_MODE_CP
|
Configure OSDP in Control Panel mode |
CONFIG_OSDP_MODE_PD
|
Configure OSDP in Peripheral Device mode |
CONFIG_OSDP_NUM_CONNECTED_PD
|
Number of connected Peripheral Devices |
CONFIG_OSDP_PACKET_TRACE
|
Print bytes sent/received over OSDP to console |
CONFIG_OSDP_PD_ADDRESS
|
Peripheral Device Address |
CONFIG_OSDP_PD_ADDRESS_LIST
|
List of connected Peripheral Device addresses |
CONFIG_OSDP_PD_CAP_CARD_DATA_FORMAT_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_CONTACT_STATUS_MONITORING_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_CONTACT_STATUS_MONITORING_NUM_ITEMS
|
Number of items |
CONFIG_OSDP_PD_CAP_OUTPUT_CONTROL_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_OUTPUT_CONTROL_NUM_ITEMS
|
Number of items |
CONFIG_OSDP_PD_CAP_READER_AUDIBLE_OUTPUT_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_READER_AUDIBLE_OUTPUT_NUM_ITEMS
|
Number of items |
CONFIG_OSDP_PD_CAP_READER_LED_CONTROL_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_READER_LED_CONTROL_NUM_ITEMS
|
Number of items |
CONFIG_OSDP_PD_CAP_READER_TEXT_OUTPUT_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_CAP_READER_TEXT_OUTPUT_NUM_ITEMS
|
Number of items |
CONFIG_OSDP_PD_CAP_TIME_KEEPING_COMP_LEVEL
|
Compliance Level |
CONFIG_OSDP_PD_COMMAND_QUEUE_SIZE
|
OSDP Peripheral Device command queue size |
CONFIG_OSDP_PD_ID_FIRMWARE_VERSION
|
PD Firmware Version |
CONFIG_OSDP_PD_ID_MODEL
|
PD Product Model Number |
CONFIG_OSDP_PD_ID_SERIAL_NUMBER
|
PD Serial Number |
CONFIG_OSDP_PD_ID_VENDOR_CODE
|
PD Vendor Code |
CONFIG_OSDP_PD_ID_VERSION
|
PD Product Version |
CONFIG_OSDP_PD_POLL_RATE
|
Number Peripheral Device POLL commands per second |
CONFIG_OSDP_PD_SCBK
|
Secure Channel Base Key (SCBK) |
CONFIG_OSDP_SC_ENABLED
|
Enable OSDP Secure Channel |
CONFIG_OSDP_SC_RETRY_WAIT_SEC
|
Retry wait time in seconds after a Secure Channel error |
CONFIG_OSDP_THREAD_STACK_SIZE
|
OSDP Thread stack size |
CONFIG_OSDP_UART_BAUD_RATE
|
OSDP UART baud rate |
CONFIG_OSDP_UART_BUFFER_LENGTH
|
OSDP UART buffer length |
CONFIG_OSDP_UART_DEV_NAME
|
Device name of UART device for OSDP |
CONFIG_OS_MGMT_ECHO
|
Support for echo command |
CONFIG_OS_MGMT_RESET_MS
|
Delay before executing reset command (ms) |
CONFIG_OS_MGMT_TASKSTAT
|
Support for taskstat command |
CONFIG_OUTPUT_DISASSEMBLE_ALL
|
Disassemble all sections with source. Fill zeros. |
CONFIG_OUTPUT_DISASSEMBLY
|
Create a disassembly file |
CONFIG_OUTPUT_PRINT_MEMORY_USAGE
|
Print memory usage to stdout |
CONFIG_OUTPUT_STAT
|
Create a statistics file |
CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT
|
Override compiler defaults for -fomit-frame-pointer |
CONFIG_PAW3212_LOG_LEVEL
|
|
CONFIG_PAW3212_LOG_LEVEL_DBG
|
Debug |
CONFIG_PAW3212_LOG_LEVEL_ERR
|
Error |
CONFIG_PAW3212_LOG_LEVEL_INF
|
Info |
CONFIG_PAW3212_LOG_LEVEL_OFF
|
Off |
CONFIG_PAW3212_LOG_LEVEL_WRN
|
Warning |
CONFIG_PCA9633
|
PCA9633 LED driver |
CONFIG_PCD_LOG_LEVEL
|
|
CONFIG_PCD_LOG_LEVEL_DBG
|
Debug |
CONFIG_PCD_LOG_LEVEL_ERR
|
Error |
CONFIG_PCD_LOG_LEVEL_INF
|
Info |
CONFIG_PCD_LOG_LEVEL_OFF
|
Off |
CONFIG_PCD_LOG_LEVEL_WRN
|
Warning |
CONFIG_PCIE
|
Enable new PCI/PCIe Root Complex support |
CONFIG_PCIE_ENDPOINT
|
Enable PCIe Endpoint support |
CONFIG_PCIE_EP_IPROC
|
Broadcom iProc PCIe EP driver |
CONFIG_PCIE_EP_IPROC_INIT_CFG
|
Re-initialize PCIe MSI/MSIX configurations |
CONFIG_PCIE_EP_IPROC_V2
|
Version-2 of iProc PCIe EP controller |
CONFIG_PCIE_EP_LOG_LEVEL
|
|
CONFIG_PCIE_EP_LOG_LEVEL_DBG
|
Debug |
CONFIG_PCIE_EP_LOG_LEVEL_ERR
|
Error |
CONFIG_PCIE_EP_LOG_LEVEL_INF
|
Info |
CONFIG_PCIE_EP_LOG_LEVEL_OFF
|
Off |
CONFIG_PCIE_EP_LOG_LEVEL_WRN
|
Warning |
CONFIG_PCIE_MMIO_CFG
|
Use MMIO PCI configuration space access |
CONFIG_PCIE_MSI
|
Enable support for PCI(e) MSI |
CONFIG_PCIE_MSI_MULTI_VECTOR
|
Enable MSI multi-vector support |
CONFIG_PCIE_MSI_X
|
Enable MSI-X support |
CONFIG_PCIE_SHELL
|
Enable PCIe/new PCI Shell |
CONFIG_PDN_LOG_LEVEL
|
|
CONFIG_PDN_LOG_LEVEL_DBG
|
Debug |
CONFIG_PDN_LOG_LEVEL_ERR
|
Error |
CONFIG_PDN_LOG_LEVEL_INF
|
Info |
CONFIG_PDN_LOG_LEVEL_OFF
|
Off |
CONFIG_PDN_LOG_LEVEL_WRN
|
Warning |
CONFIG_PECI
|
PECI Driver |
CONFIG_PECI_INIT_PRIORITY
|
PECI driver init priority |
CONFIG_PECI_INTERRUPT_DRIVEN
|
PECI driver interrupt support |
CONFIG_PECI_LOG_LEVEL
|
|
CONFIG_PECI_LOG_LEVEL_DBG
|
Debug |
CONFIG_PECI_LOG_LEVEL_ERR
|
Error |
CONFIG_PECI_LOG_LEVEL_INF
|
Info |
CONFIG_PECI_LOG_LEVEL_OFF
|
Off |
CONFIG_PECI_LOG_LEVEL_WRN
|
Warning |
CONFIG_PECI_XEC
|
XEC Microchip PECI driver |
CONFIG_PERCEPIO_TRACERECORDER
|
Percepio Tracealyzer support |
CONFIG_PICO_PSRAM_CS_IO
|
PSRAM CS IO number |
CONFIG_PIC_DISABLE
|
Disable PIC |
CONFIG_PINMUX
|
Enable board pinmux driver |
CONFIG_PINMUX_BEETLE
|
ARM V2M Beetle Pin multiplexer driver |
CONFIG_PINMUX_CC13XX_CC26XX
|
TI SimpleLink CC13xx / CC26xx pinmux driver |
CONFIG_PINMUX_ESP32
|
ESP32 Pin multiplexer driver |
CONFIG_PINMUX_HSDK
|
ARC HSDK I/O pin mux driver |
CONFIG_PINMUX_INIT_PRIORITY
|
Init priority |
CONFIG_PINMUX_INTEL_S1000
|
Intel S1000 I/O multiplexer driver |
CONFIG_PINMUX_ITE_IT8XXX2
|
IT8XXX2 pinmux driver |
CONFIG_PINMUX_LPC11U6X
|
Pinmux driver for NXP LPC11U6X MCUs |
CONFIG_PINMUX_MCUX
|
MCUX pinmux driver |
CONFIG_PINMUX_MCUX_LPC
|
MCUX LPC pinmux driver |
CONFIG_PINMUX_RV32M1
|
RV32M1 pinmux driver |
CONFIG_PINMUX_SAM0
|
Atmel SAM0 pin multiplexer driver |
CONFIG_PINMUX_SIFIVE
|
SiFive Freedom SOC pinmux driver |
CONFIG_PINMUX_STM32
|
Pinmux driver for STM32 MCUs |
CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY
|
Device initialization priority STM32 pinmux |
CONFIG_PINMUX_TELINK_B91
|
Telink Semiconductor B91 pinmux driver |
CONFIG_PINMUX_XEC
|
XEC Microchip Pinmux driver |
CONFIG_PLATFORM_SPECIFIC_INIT
|
Enable platform (SOC) specific startup hook |
CONFIG_PLIC
|
Platform Level Interrupt Controller (PLIC) |
CONFIG_PM
|
System Power Management |
CONFIG_PMP_POWER_OF_TWO_ALIGNMENT
|
Enable power of two alignment |
CONFIG_PMP_SLOT
|
Number of PMP slot |
CONFIG_PMP_STACK_GUARD
|
Thread Stack Guard |
CONFIG_PMP_STACK_GUARD_MIN_SIZE
|
Guard size |
CONFIG_PMS7003
|
PMS7003 particulate matter sensor |
CONFIG_PMW3360_LOG_LEVEL
|
|
CONFIG_PMW3360_LOG_LEVEL_DBG
|
Debug |
CONFIG_PMW3360_LOG_LEVEL_ERR
|
Error |
CONFIG_PMW3360_LOG_LEVEL_INF
|
Info |
CONFIG_PMW3360_LOG_LEVEL_OFF
|
Off |
CONFIG_PMW3360_LOG_LEVEL_WRN
|
Warning |
CONFIG_PM_CPU_OPS
|
CPU power management drivers |
CONFIG_PM_CPU_OPS_HAS_DRIVER
|
|
CONFIG_PM_CPU_OPS_LOG_LEVEL
|
|
CONFIG_PM_CPU_OPS_LOG_LEVEL_DBG
|
Debug |
CONFIG_PM_CPU_OPS_LOG_LEVEL_ERR
|
Error |
CONFIG_PM_CPU_OPS_LOG_LEVEL_INF
|
Info |
CONFIG_PM_CPU_OPS_LOG_LEVEL_OFF
|
Off |
CONFIG_PM_CPU_OPS_LOG_LEVEL_WRN
|
Warning |
CONFIG_PM_CPU_OPS_PSCI
|
Support for the ARM Power State Coordination Interface (PSCI) |
CONFIG_PM_DEBUG
|
System Power Management debug hooks |
CONFIG_PM_DEVICE
|
Device power management |
CONFIG_PM_DEVICE_RUNTIME
|
Runtime Device Power Management |
CONFIG_PM_LOG_LEVEL
|
|
CONFIG_PM_LOG_LEVEL_DBG
|
Debug |
CONFIG_PM_LOG_LEVEL_ERR
|
Error |
CONFIG_PM_LOG_LEVEL_INF
|
Info |
CONFIG_PM_LOG_LEVEL_OFF
|
Off |
CONFIG_PM_LOG_LEVEL_WRN
|
Warning |
CONFIG_PM_POLICY_APP
|
Application PM Policy |
CONFIG_PM_POLICY_DUMMY
|
Dummy PM Policy |
CONFIG_PM_POLICY_RESIDENCY
|
PM Policy based on CPU residency |
CONFIG_PM_POLICY_RESIDENCY_DEFAULT
|
|
CONFIG_POLL
|
Async I/O Framework |
CONFIG_POSIX_API
|
POSIX APIs |
CONFIG_POSIX_CLOCK
|
POSIX clock, timer, and sleep APIs |
CONFIG_POSIX_FS
|
Enable POSIX file system API support |
CONFIG_POSIX_MAX_FDS
|
Maximum number of open file descriptors |
CONFIG_POSIX_MAX_OPEN_FILES
|
Maximum number of open file descriptors |
CONFIG_POSIX_MQUEUE
|
Enable POSIX message queue |
CONFIG_PPI_TRACE_LOG_LEVEL
|
|
CONFIG_PPI_TRACE_LOG_LEVEL_DBG
|
Debug |
CONFIG_PPI_TRACE_LOG_LEVEL_ERR
|
Error |
CONFIG_PPI_TRACE_LOG_LEVEL_INF
|
Info |
CONFIG_PPI_TRACE_LOG_LEVEL_OFF
|
Off |
CONFIG_PPI_TRACE_LOG_LEVEL_WRN
|
Warning |
CONFIG_PPP_CLIENT_CLIENTSERVER
|
Reply to the request CLIENT with CLIENTSERVER |
CONFIG_PPP_MAC_ADDR
|
MAC address for the interface |
CONFIG_PREEMPT_ENABLED
|
|
CONFIG_PRINTK
|
Send printk() to console |
CONFIG_PRINTK_BUFFER_SIZE
|
printk() buffer size |
CONFIG_PRINTK_HOOK_INIT_PRIORITY
|
|
CONFIG_PRINTK_SYNC
|
Serialize printk() calls |
CONFIG_PRIORITY_CEILING
|
Priority inheritance ceiling |
CONFIG_PRIVILEGED_STACK_SIZE
|
Size of privileged stack |
CONFIG_PS2
|
PS/2 Drivers |
CONFIG_PS2_CHANNEL_INIT_PRIORITY
|
PS/2 channel driver init priority |
CONFIG_PS2_INIT_PRIORITY
|
PS/2 driver init priority |
CONFIG_PS2_LOG_LEVEL
|
|
CONFIG_PS2_LOG_LEVEL_DBG
|
Debug |
CONFIG_PS2_LOG_LEVEL_ERR
|
Error |
CONFIG_PS2_LOG_LEVEL_INF
|
Info |
CONFIG_PS2_LOG_LEVEL_OFF
|
Off |
CONFIG_PS2_LOG_LEVEL_WRN
|
Warning |
CONFIG_PS2_NPCX
|
Nuvoton NPCX embedded controller (EC) PS2 driver |
CONFIG_PS2_XEC
|
XEC Microchip PS2 driver |
CONFIG_PS2_XEC_0
|
PS2_XEC_0 |
CONFIG_PS2_XEC_1
|
PS2_XEC_1 |
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL
|
|
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL_DBG
|
Debug |
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL_ERR
|
Error |
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL_INF
|
Info |
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL_OFF
|
Off |
CONFIG_PSA_EITS_BACKEND_ZEPHYR_LOG_LEVEL_WRN
|
Warning |
CONFIG_PTHREAD_IPC
|
POSIX pthread IPC API |
CONFIG_PTP_CLOCK
|
Precision Time Protocol Clock driver support |
CONFIG_PTP_CLOCK_MCUX
|
MCUX PTP clock driver support |
CONFIG_PTP_CLOCK_SAM_GMAC
|
SAM GMAC PTP clock driver support |
CONFIG_PWM
|
PWM (Pulse Width Modulation) Drivers |
CONFIG_PWM_CAPTURE
|
Provide API for PWM capture |
CONFIG_PWM_CAPTURE_MCUX_FTM_FILTER_VALUE
|
MCUX FTM PWM capture filter value |
CONFIG_PWM_GECKO
|
GECKO MCU PWM driver |
CONFIG_PWM_IMX
|
i.MX PWM Driver |
CONFIG_PWM_ITE_IT8XXX2
|
ITE IT8XXX2 embedded controller (EC) PWM driver |
CONFIG_PWM_LED_ESP32
|
ESP32 PWM LED driver |
CONFIG_PWM_LED_ESP32_DEV_NAME_0
|
ESP32 PWM LED Name |
CONFIG_PWM_LED_ESP32_HS_CH
|
Set high speed channels |
CONFIG_PWM_LED_ESP32_HS_CH0
|
Enable channel 0 |
CONFIG_PWM_LED_ESP32_HS_CH0_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH0_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH1
|
Enable channel 1 |
CONFIG_PWM_LED_ESP32_HS_CH1_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH1_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH2
|
Enable channel 2 |
CONFIG_PWM_LED_ESP32_HS_CH2_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH2_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH3
|
Enable channel 3 |
CONFIG_PWM_LED_ESP32_HS_CH3_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH3_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH4
|
Enable channel 4 |
CONFIG_PWM_LED_ESP32_HS_CH4_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH4_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH5
|
Enable channel 5 |
CONFIG_PWM_LED_ESP32_HS_CH5_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH5_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH6
|
Enable channel 6 |
CONFIG_PWM_LED_ESP32_HS_CH6_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH6_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_CH7
|
Enable channel 7 |
CONFIG_PWM_LED_ESP32_HS_CH7_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_HS_CH7_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_HS_TIMER
|
Set high speed timers |
CONFIG_PWM_LED_ESP32_HS_TIMER0
|
Set timer 0 |
CONFIG_PWM_LED_ESP32_HS_TIMER0_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER0_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER1
|
Set timer 1 |
CONFIG_PWM_LED_ESP32_HS_TIMER1_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER1_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER2
|
Set timer 2 |
CONFIG_PWM_LED_ESP32_HS_TIMER2_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER2_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_HS_TIMER3
|
Set timer 3 |
CONFIG_PWM_LED_ESP32_HS_TIMER3_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_HS_TIMER3_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_LS_CH
|
Set low speed channels |
CONFIG_PWM_LED_ESP32_LS_CH0
|
Enable channel 0 |
CONFIG_PWM_LED_ESP32_LS_CH0_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH0_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH1
|
Enable channel 1 |
CONFIG_PWM_LED_ESP32_LS_CH1_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH1_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH2
|
Enable channel 2 |
CONFIG_PWM_LED_ESP32_LS_CH2_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH2_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH3
|
Enable channel 3 |
CONFIG_PWM_LED_ESP32_LS_CH3_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH3_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH4
|
Enable channel 4 |
CONFIG_PWM_LED_ESP32_LS_CH4_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH4_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH5
|
Enable channel 5 |
CONFIG_PWM_LED_ESP32_LS_CH5_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH5_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH6
|
Enable channel 6 |
CONFIG_PWM_LED_ESP32_LS_CH6_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH6_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_CH7
|
Enable channel 7 |
CONFIG_PWM_LED_ESP32_LS_CH7_GPIO
|
GPIO number |
CONFIG_PWM_LED_ESP32_LS_CH7_TIMER
|
Set timer |
CONFIG_PWM_LED_ESP32_LS_TIMER
|
Set low speed timers |
CONFIG_PWM_LED_ESP32_LS_TIMER0
|
Set timer 0 |
CONFIG_PWM_LED_ESP32_LS_TIMER0_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER0_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER1
|
Set timer 1 |
CONFIG_PWM_LED_ESP32_LS_TIMER1_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER1_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER2
|
Set timer 2 |
CONFIG_PWM_LED_ESP32_LS_TIMER2_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER2_FREQ
|
Set frequency |
CONFIG_PWM_LED_ESP32_LS_TIMER3
|
Set timer 3 |
CONFIG_PWM_LED_ESP32_LS_TIMER3_BIT_NUM
|
Timer counter precision |
CONFIG_PWM_LED_ESP32_LS_TIMER3_FREQ
|
Set frequency |
CONFIG_PWM_LITEX
|
LiteX PWM driver |
CONFIG_PWM_LITEX_INIT_PRIORITY
|
Init priority |
CONFIG_PWM_LOG_LEVEL
|
|
CONFIG_PWM_LOG_LEVEL_DBG
|
Debug |
CONFIG_PWM_LOG_LEVEL_ERR
|
Error |
CONFIG_PWM_LOG_LEVEL_INF
|
Info |
CONFIG_PWM_LOG_LEVEL_OFF
|
Off |
CONFIG_PWM_LOG_LEVEL_WRN
|
Warning |
CONFIG_PWM_MCUX
|
MCUX PWM driver |
CONFIG_PWM_MCUX_FTM
|
MCUX FTM PWM driver |
CONFIG_PWM_MCUX_PWT
|
MCUX PWT PWM capture driver |
CONFIG_PWM_MCUX_TPM
|
MCUX TPM PWM driver |
CONFIG_PWM_NPCX
|
Nuvoton NPCX embedded controller (EC) PWM driver |
CONFIG_PWM_NRF5_SW
|
Nordic Semiconductor nRF5x series S/W PWM |
CONFIG_PWM_NRFX
|
nRF PWM nrfx driver |
CONFIG_PWM_PWMSWR_LOOP
|
Loop count for PWM Software Reset |
CONFIG_PWM_RV32M1_TPM
|
RV32M1 TPM PWM driver |
CONFIG_PWM_SAM
|
Atmel SAM MCU Family PWM Driver |
CONFIG_PWM_SAM0_TCC
|
Atmel SAM0 MCU Family TCC PWM Driver |
CONFIG_PWM_SHELL
|
Enable PWM shell |
CONFIG_PWM_SIFIVE
|
SiFive Freedom PWM driver |
CONFIG_PWM_SIFIVE_INIT_PRIORITY
|
Init Priority |
CONFIG_PWM_STM32
|
STM32 MCU PWM driver |
CONFIG_PWM_XEC
|
Microchip XEC PWM |
CONFIG_PWM_XLNX_AXI_TIMER
|
Xilinx AXI Timer driver |
CONFIG_QDEC_NRFX
|
Nordic QDEC nrfx driver |
CONFIG_QDEC_SAM
|
Atmel SAM QDEC driver |
CONFIG_QEMU_ICOUNT
|
QEMU icount mode |
CONFIG_QEMU_ICOUNT_SHIFT
|
QEMU icount shift value |
CONFIG_QEMU_IVSHMEM_PLAIN_MEM_SIZE
|
QEMU ivshmem-plain shared memory size in mega-bytes |
CONFIG_QEMU_TARGET
|
|
CONFIG_RAMDISK_LOG_LEVEL
|
|
CONFIG_RAMDISK_LOG_LEVEL_DBG
|
Debug |
CONFIG_RAMDISK_LOG_LEVEL_ERR
|
Error |
CONFIG_RAMDISK_LOG_LEVEL_INF
|
Info |
CONFIG_RAMDISK_LOG_LEVEL_OFF
|
Off |
CONFIG_RAMDISK_LOG_LEVEL_WRN
|
Warning |
CONFIG_RAM_CONSOLE
|
Use RAM console |
CONFIG_RAM_CONSOLE_BUFFER_SIZE
|
Ram Console buffer size |
CONFIG_RAM_POWERDOWN_LOG_LEVEL
|
|
CONFIG_RAM_POWERDOWN_LOG_LEVEL_DBG
|
Debug |
CONFIG_RAM_POWERDOWN_LOG_LEVEL_ERR
|
Error |
CONFIG_RAM_POWERDOWN_LOG_LEVEL_INF
|
Info |
CONFIG_RAM_POWERDOWN_LOG_LEVEL_OFF
|
Off |
CONFIG_RAM_POWERDOWN_LOG_LEVEL_WRN
|
Warning |
CONFIG_RAM_TRACING_BUFFER_SIZE
|
Ram Tracing buffer size |
CONFIG_RCAR_CMT_TIMER
|
Renesas RCar cmt timer |
CONFIG_REBOOT
|
Reboot functionality |
CONFIG_REBOOT_RST_CNT
|
Reboot via RST_CNT register |
CONFIG_REGULATOR
|
Regulator drivers |
CONFIG_REGULATOR_FIXED
|
GPIO-controlled regulators |
CONFIG_REGULATOR_FIXED_INIT_PRIORITY
|
Init priority |
CONFIG_REGULATOR_LOG_LEVEL
|
|
CONFIG_REGULATOR_LOG_LEVEL_DBG
|
Debug |
CONFIG_REGULATOR_LOG_LEVEL_ERR
|
Error |
CONFIG_REGULATOR_LOG_LEVEL_INF
|
Info |
CONFIG_REGULATOR_LOG_LEVEL_OFF
|
Off |
CONFIG_REGULATOR_LOG_LEVEL_WRN
|
Warning |
CONFIG_REQUIRES_FULL_LIBC
|
|
CONFIG_RESET_VECTOR_IN_BOOTLOADER
|
Link reset vector into bootloader |
CONFIG_RGF_NUM_BANKS
|
Number of General Purpose Register Banks |
CONFIG_RING_BUFFER
|
Enable ring buffers |
CONFIG_RISCV
|
|
CONFIG_RISCV_GENERIC_TOOLCHAIN
|
Compile using generic riscv32 toolchain |
CONFIG_RISCV_HAS_CPU_IDLE
|
Does SOC has CPU IDLE instruction |
CONFIG_RISCV_HAS_PLIC
|
Does the SOC provide support for a Platform Level Interrupt Controller |
CONFIG_RISCV_MACHINE_TIMER
|
RISCV Machine Timer |
CONFIG_RISCV_PMP
|
RISC-V PMP Support |
CONFIG_RISCV_SOC_CONTEXT_SAVE
|
Enable SOC-based context saving in IRQ handlers |
CONFIG_RISCV_SOC_INIT_GP_VALUE
|
Enable SOC-based global pointer register initialization |
CONFIG_RISCV_SOC_INTERRUPT_INIT
|
Enable SOC-based interrupt initialization |
CONFIG_RISCV_SOC_OFFSETS
|
Enable SOC-based offsets |
CONFIG_RNDIS_BULK_EP_MPS
|
|
CONFIG_RNDIS_INTERRUPT_EP_MPS
|
|
CONFIG_ROM_START_OFFSET
|
ROM Start Offset accounting for BL2 Header in the NS image |
CONFIG_RPMSG_MULTI_INSTANCE
|
RPMsg multiple instance |
CONFIG_RPMSG_MULTI_INSTANCES_NO
|
Number of RPMSG instances. |
CONFIG_RPMSG_MULTI_INSTANCE_1_IPM_RX_NAME
|
RX IPM channel name for instance 1 |
CONFIG_RPMSG_MULTI_INSTANCE_1_IPM_TX_NAME
|
TX IPM channel name for instance 1 |
CONFIG_RPMSG_MULTI_INSTANCE_2_IPM_RX_NAME
|
RX IPM channel name for instance 2 |
CONFIG_RPMSG_MULTI_INSTANCE_2_IPM_TX_NAME
|
TX IPM channel name for instance 2 |
CONFIG_RPMSG_MULTI_INSTANCE_3_IPM_RX_NAME
|
RX IPM channel name for instance 3 |
CONFIG_RPMSG_MULTI_INSTANCE_3_IPM_TX_NAME
|
TX IPM channel name for instance 3 |
CONFIG_RPMSG_MULTI_INSTANCE_4_IPM_RX_NAME
|
RX IPM channel name for instance 4 |
CONFIG_RPMSG_MULTI_INSTANCE_4_IPM_TX_NAME
|
TX IPM channel name for instance 4 |
CONFIG_RPMSG_MULTI_INSTANCE_5_IPM_RX_NAME
|
RX IPM channel name for instance 5 |
CONFIG_RPMSG_MULTI_INSTANCE_5_IPM_TX_NAME
|
TX IPM channel name for instance 5 |
CONFIG_RPMSG_MULTI_INSTANCE_6_IPM_RX_NAME
|
RX IPM channel name for instance 6 |
CONFIG_RPMSG_MULTI_INSTANCE_6_IPM_TX_NAME
|
TX IPM channel name for instance 6 |
CONFIG_RPMSG_MULTI_INSTANCE_7_IPM_RX_NAME
|
RX IPM channel name for instance 7 |
CONFIG_RPMSG_MULTI_INSTANCE_7_IPM_TX_NAME
|
TX IPM channel name for instance 7 |
CONFIG_RPMSG_MULTI_INSTANCE_8_IPM_RX_NAME
|
RX IPM channel name for instance 8 |
CONFIG_RPMSG_MULTI_INSTANCE_8_IPM_TX_NAME
|
TX IPM channel name for instance 8 |
CONFIG_RPMSG_MULTI_INSTANCE_INIT_PRIORITY
|
Initialization priority of RPMsg muliple instances |
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL
|
|
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL_DBG
|
Debug |
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL_ERR
|
Error |
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL_INF
|
Info |
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL_OFF
|
Off |
CONFIG_RPMSG_MULTI_INSTANCE_LOG_LEVEL_WRN
|
Warning |
CONFIG_RPMSG_MULTI_INSTANCE_MASTER
|
Master |
CONFIG_RPMSG_MULTI_INSTANCE_REMOTE
|
Remote |
CONFIG_RPMSG_MULTI_INSTANCE_SHM_BASE_ADDRESS
|
|
CONFIG_RPMSG_MULTI_INSTANCE_SHM_SIZE
|
|
CONFIG_RPMSG_SERVICE
|
RPMsg service for multiple users |
CONFIG_RPMSG_SERVICE_DUAL_IPM_SUPPORT
|
|
CONFIG_RPMSG_SERVICE_EP_REG_PRIORITY
|
Initialization priority of modules registering RPMsg endpoints |
CONFIG_RPMSG_SERVICE_INIT_PRIORITY
|
Initialization priority of RPMsg service |
CONFIG_RPMSG_SERVICE_IPM_NAME
|
|
CONFIG_RPMSG_SERVICE_IPM_RX_NAME
|
|
CONFIG_RPMSG_SERVICE_IPM_TX_NAME
|
|
CONFIG_RPMSG_SERVICE_LOG_LEVEL
|
|
CONFIG_RPMSG_SERVICE_LOG_LEVEL_DBG
|
Debug |
CONFIG_RPMSG_SERVICE_LOG_LEVEL_ERR
|
Error |
CONFIG_RPMSG_SERVICE_LOG_LEVEL_INF
|
Info |
CONFIG_RPMSG_SERVICE_LOG_LEVEL_OFF
|
Off |
CONFIG_RPMSG_SERVICE_LOG_LEVEL_WRN
|
Warning |
CONFIG_RPMSG_SERVICE_MODE_MASTER
|
RPMsg master |
CONFIG_RPMSG_SERVICE_MODE_REMOTE
|
RPMsg remote |
CONFIG_RPMSG_SERVICE_NUM_ENDPOINTS
|
Max number of registered endpoints |
CONFIG_RPMSG_SERVICE_SHM_BASE_ADDRESS
|
|
CONFIG_RPMSG_SERVICE_SHM_SIZE
|
|
CONFIG_RPMSG_SERVICE_SINGLE_IPM_SUPPORT
|
|
CONFIG_RPMSG_SERVICE_WORK_QUEUE_STACK_SIZE
|
Size of RX work queue stack |
CONFIG_RTOS_TIMER
|
MEC1501 RTOS timer |
CONFIG_RTTI
|
Enable C++ RTTI support |
CONFIG_RTT_CONSOLE
|
Use RTT console |
CONFIG_RTT_TX_RETRY_CNT
|
Number of TX retries |
CONFIG_RTT_TX_RETRY_DELAY_MS
|
Delay between TX retries in milliseconds |
CONFIG_RTT_TX_RETRY_IN_INTERRUPT
|
Busy wait in the interrupt context for TX retry |
CONFIG_RUNTIME_ERROR_CHECKS
|
Enable runtime error checks |
CONFIG_RUNTIME_NMI
|
Attach an NMI handler at runtime |
CONFIG_RV32M1_INTMUX
|
OpenISA RV32M1 INTMUX interrupt controller support |
CONFIG_RV32M1_INTMUX_CHANNEL_0
|
INTMUX channel 0 |
CONFIG_RV32M1_INTMUX_CHANNEL_1
|
INTMUX channel 1 |
CONFIG_RV32M1_INTMUX_CHANNEL_2
|
INTMUX channel 2 |
CONFIG_RV32M1_INTMUX_CHANNEL_3
|
INTMUX channel 3 |
CONFIG_RV32M1_INTMUX_CHANNEL_4
|
INTMUX channel 4 |
CONFIG_RV32M1_INTMUX_CHANNEL_5
|
INTMUX channel 5 |
CONFIG_RV32M1_INTMUX_CHANNEL_6
|
INTMUX channel 6 |
CONFIG_RV32M1_INTMUX_CHANNEL_7
|
INTMUX channel 7 |
CONFIG_RV32M1_INTMUX_INIT_PRIORITY
|
INTMUX driver initialization priority |
CONFIG_RV32M1_LPTMR_TIMER
|
RV32M1 LPTMR system timer driver |
CONFIG_SAM0_EIC
|
External Interrupt Controller (EIC) Driver for SAM0 series devices |
CONFIG_SAM0_RTC_TIMER
|
Atmel SAM0 series RTC timer |
CONFIG_SBS_GAUGE
|
Smart Battery Fuel Gauge |
CONFIG_SCHED_CPU_MASK
|
Enable CPU mask affinity/pinning API |
CONFIG_SCHED_DEADLINE
|
Enable earliest-deadline-first scheduling |
CONFIG_SCHED_DUMB
|
Simple linked-list ready queue |
CONFIG_SCHED_IPI_SUPPORTED
|
|
CONFIG_SCHED_IPI_VECTOR
|
IDT vector to use for scheduler IPI |
CONFIG_SCHED_MULTIQ
|
Traditional multi-queue ready queue |
CONFIG_SCHED_SCALABLE
|
Red/black tree ready queue |
CONFIG_SDL_DISPLAY
|
SDL based emulated display |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_ARGB_8888
|
ARGB 8888 |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_BGR_565
|
BGR 565 |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_MONO01
|
Mono Black=0 |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_MONO10
|
Mono Black=1 |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_RGB_565
|
RGB 565 |
CONFIG_SDL_DISPLAY_DEFAULT_PIXEL_FORMAT_RGB_888
|
RGB 888 |
CONFIG_SDL_DISPLAY_DEV_NAME
|
SDL display device name |
CONFIG_SDL_DISPLAY_X_RES
|
X resolution for SDL display |
CONFIG_SDL_DISPLAY_Y_RES
|
Y resolution for SDL display |
CONFIG_SDL_POINTER_KSCAN_DEV_NAME
|
SDL kscan device name |
CONFIG_SDMMC_INIT_PRIORITY
|
Init priority |
CONFIG_SDMMC_LOG_LEVEL
|
|
CONFIG_SDMMC_LOG_LEVEL_DBG
|
Debug |
CONFIG_SDMMC_LOG_LEVEL_ERR
|
Error |
CONFIG_SDMMC_LOG_LEVEL_INF
|
Info |
CONFIG_SDMMC_LOG_LEVEL_OFF
|
Off |
CONFIG_SDMMC_LOG_LEVEL_WRN
|
Warning |
CONFIG_SDMMC_OVER_SPI
|
SDHC access over SPI |
CONFIG_SDMMC_STM32
|
STM32 SDMMC driver |
CONFIG_SDMMC_USDHC
|
NXP i.MXRT USDHC driver |
CONFIG_SDMMC_VOLUME_NAME
|
SDMMC Disk mount point or drive name |
CONFIG_SECOND_CORE_BOOT_ADDRESS_MCUX
|
Address the second core will boot at |
CONFIG_SECOND_CORE_MCUX
|
Enable LPC54114 Cortex-M0 second core |
CONFIG_SECOND_IMAGE_MCUX
|
Binary image of second core’s code |
CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN
|
Size of the buffer for terminal input of target, from host |
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP
|
Size of the buffer for terminal output of target, up to host |
CONFIG_SEGGER_RTT_CUSTOM_LOCKING
|
Enable custom locking |
CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS
|
Maximum number of down-buffers |
CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS
|
Maximum number of up-buffers |
CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP
|
Use a simple byte-loop instead of standard memcpy |
CONFIG_SEGGER_RTT_MODE
|
|
CONFIG_SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
|
Block: Wait until there is space in the buffer. |
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_SKIP
|
Skip. Do not block, output nothing. |
CONFIG_SEGGER_RTT_MODE_NO_BLOCK_TRIM
|
Trim: Do not block, output as much as fits. |
CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE
|
Size of buffer for RTT printf to bulk-send chars via RTT |
CONFIG_SEGGER_RTT_SECTION_DTCM
|
Place RTT data in the DTCM linker section |
CONFIG_SEGGER_RTT_SECTION_NONE
|
Place RTT data in the default linker section |
CONFIG_SEGGER_SYSTEMVIEW
|
Segger SystemView support |
CONFIG_SEGGER_SYSTEMVIEW_BOOT_ENABLE
|
Start logging SystemView events on system start |
CONFIG_SEGGER_SYSVIEW_POST_MORTEM_MODE
|
Enable post-mortem mode for SystemView |
CONFIG_SEGGER_SYSVIEW_RTT_BUFFER_SIZE
|
Buffer size for SystemView RTT |
CONFIG_SEGGER_SYSVIEW_SECTION_DTCM
|
Place SystemView data in the DTCM linker section |
CONFIG_SEGGER_SYSVIEW_SECTION_NONE
|
Place SystemView data in the default linker section |
CONFIG_SEMIHOST_CONSOLE
|
Use semihosting for console |
CONFIG_SEM_VALUE_MAX
|
Maximum semaphore limit |
CONFIG_SENSOR
|
Sensor Drivers |
CONFIG_SENSOR_INIT_PRIORITY
|
Sensor init priority |
CONFIG_SENSOR_LOG_LEVEL
|
|
CONFIG_SENSOR_LOG_LEVEL_DBG
|
Debug |
CONFIG_SENSOR_LOG_LEVEL_ERR
|
Error |
CONFIG_SENSOR_LOG_LEVEL_INF
|
Info |
CONFIG_SENSOR_LOG_LEVEL_OFF
|
Off |
CONFIG_SENSOR_LOG_LEVEL_WRN
|
Warning |
CONFIG_SENSOR_SHELL
|
Enable sensor shell |
CONFIG_SENSOR_SHELL_BATTERY
|
Enable sensor shell ‘battery’ command |
CONFIG_SENSOR_SIM_LOG_LEVEL
|
|
CONFIG_SENSOR_SIM_LOG_LEVEL_DBG
|
Debug |
CONFIG_SENSOR_SIM_LOG_LEVEL_ERR
|
Error |
CONFIG_SENSOR_SIM_LOG_LEVEL_INF
|
Info |
CONFIG_SENSOR_SIM_LOG_LEVEL_OFF
|
Off |
CONFIG_SENSOR_SIM_LOG_LEVEL_WRN
|
Warning |
CONFIG_SERIAL
|
Serial Drivers |
CONFIG_SERIAL_HAS_DRIVER
|
|
CONFIG_SERIAL_SUPPORT_ASYNC
|
|
CONFIG_SERIAL_SUPPORT_INTERRUPT
|
|
CONFIG_SERIAL_TEST
|
|
CONFIG_SETTINGS
|
Settings |
CONFIG_SETTINGS_CUSTOM
|
CUSTOM |
CONFIG_SETTINGS_DYNAMIC_HANDLERS
|
dynamic settings handlers |
CONFIG_SETTINGS_ENCODE_LEN
|
|
CONFIG_SETTINGS_FCB
|
FCB |
CONFIG_SETTINGS_FCB_MAGIC
|
FCB magic for the settings subsystem |
CONFIG_SETTINGS_FCB_NUM_AREAS
|
Number of flash areas used by the settings subsystem |
CONFIG_SETTINGS_FS
|
File System |
CONFIG_SETTINGS_FS_DIR
|
Serialization directory |
CONFIG_SETTINGS_FS_FILE
|
Default settings file |
CONFIG_SETTINGS_FS_MAX_LINES
|
Compression threshold |
CONFIG_SETTINGS_LOG_LEVEL
|
|
CONFIG_SETTINGS_LOG_LEVEL_DBG
|
Debug |
CONFIG_SETTINGS_LOG_LEVEL_ERR
|
Error |
CONFIG_SETTINGS_LOG_LEVEL_INF
|
Info |
CONFIG_SETTINGS_LOG_LEVEL_OFF
|
Off |
CONFIG_SETTINGS_LOG_LEVEL_WRN
|
Warning |
CONFIG_SETTINGS_NONE
|
NONE |
CONFIG_SETTINGS_NVS
|
NVS non-volatile storage support |
CONFIG_SETTINGS_NVS_SECTOR_COUNT
|
Sector count of the NVS settings area |
CONFIG_SETTINGS_NVS_SECTOR_SIZE_MULT
|
Sector size of the NVS settings area |
CONFIG_SETTINGS_RUNTIME
|
runtime storage back-end |
CONFIG_SET_GDT
|
Setup GDT as part of boot process |
CONFIG_SGP40
|
SGP40 Multipixel Gas Sensor |
CONFIG_SHARED_IRQ
|
Shared interrupt driver |
CONFIG_SHARED_IRQ_INIT_PRIORITY
|
Shared IRQ init priority |
CONFIG_SHELL
|
Shell |
CONFIG_SHELL_ARGC_MAX
|
Maximum arguments in shell command |
CONFIG_SHELL_BACKENDS
|
Enable shell backends |
CONFIG_SHELL_BACKEND_DUMMY
|
Enable dummy backend. |
CONFIG_SHELL_BACKEND_DUMMY_BUF_SIZE
|
Size of dummy buffer size |
CONFIG_SHELL_BACKEND_RTT
|
Enable RTT backend |
CONFIG_SHELL_BACKEND_RTT_LOG_MESSAGE_QUEUE_SIZE
|
Log message queue size |
CONFIG_SHELL_BACKEND_RTT_LOG_MESSAGE_QUEUE_TIMEOUT
|
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL
|
Enable serial backend |
CONFIG_SHELL_BACKEND_SERIAL_CHECK_DTR
|
Check DTR signal before TX |
CONFIG_SHELL_BACKEND_SERIAL_INIT_PRIORITY
|
Initialization priority |
CONFIG_SHELL_BACKEND_SERIAL_INTERRUPT_DRIVEN
|
Interrupt driven |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL
|
|
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_DEFAULT
|
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_NONE
|
None |
CONFIG_SHELL_BACKEND_SERIAL_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_BACKEND_SERIAL_LOG_MESSAGE_QUEUE_SIZE
|
Log message queue size |
CONFIG_SHELL_BACKEND_SERIAL_LOG_MESSAGE_QUEUE_TIMEOUT
|
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL_RX_POLL_PERIOD
|
RX polling period (in milliseconds) |
CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE
|
Set RX ring buffer size |
CONFIG_SHELL_BACKEND_SERIAL_TX_RING_BUFFER_SIZE
|
Set TX ring buffer size |
CONFIG_SHELL_BACKEND_TELNET
|
Enable TELNET backend. |
CONFIG_SHELL_BACKSPACE_MODE_DELETE
|
Default escape code for backspace is DELETE (0x7F) |
CONFIG_SHELL_BT_NUS_LOG_LEVEL
|
|
CONFIG_SHELL_BT_NUS_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_BT_NUS_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_BT_NUS_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_BT_NUS_LOG_LEVEL_OFF
|
Off |
CONFIG_SHELL_BT_NUS_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_BT_NUS_LOG_MESSAGE_QUEUE_SIZE
|
Log message queue size |
CONFIG_SHELL_BT_NUS_LOG_MESSAGE_QUEUE_TIMEOUT
|
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_CMDS
|
Enable built-in commands |
CONFIG_SHELL_CMDS_RESIZE
|
Enable resize command |
CONFIG_SHELL_CMDS_SELECT
|
Enable select command |
CONFIG_SHELL_CMD_BUFF_SIZE
|
Shell command buffer size |
CONFIG_SHELL_CMD_ROOT
|
Set a root command at init |
CONFIG_SHELL_DEFAULT_TERMINAL_HEIGHT
|
Default terminal height |
CONFIG_SHELL_DEFAULT_TERMINAL_WIDTH
|
Default terminal width |
CONFIG_SHELL_ECHO_STATUS
|
Enable echo on shell |
CONFIG_SHELL_GETOPT
|
Enable getopt support |
CONFIG_SHELL_HELP
|
Enable help message |
CONFIG_SHELL_HELP_ON_WRONG_ARGUMENT_COUNT
|
Enable printing help on wrong argument count |
CONFIG_SHELL_HELP_OPT_PARSE
|
Parse -h and –help options |
CONFIG_SHELL_HISTORY
|
Enable history in shell |
CONFIG_SHELL_HISTORY_BUFFER
|
History buffer in bytes |
CONFIG_SHELL_LOG_BACKEND
|
Enable shell log backend |
CONFIG_SHELL_LOG_LEVEL
|
|
CONFIG_SHELL_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_LOG_LEVEL_OFF
|
Off |
CONFIG_SHELL_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_METAKEYS
|
Enable metakeys |
CONFIG_SHELL_MINIMAL
|
Default config to reduce flash and memory requirements |
CONFIG_SHELL_PRINTF_BUFF_SIZE
|
Shell print buffer size |
CONFIG_SHELL_PROMPT_DUMMY
|
Displayed prompt name |
CONFIG_SHELL_PROMPT_RTT
|
Displayed prompt name |
CONFIG_SHELL_PROMPT_TELNET
|
Displayed prompt name |
CONFIG_SHELL_PROMPT_UART
|
Displayed prompt name |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL
|
|
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_DEFAULT
|
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_NONE
|
None |
CONFIG_SHELL_RTT_INIT_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_RTT_LOG_LEVEL
|
|
CONFIG_SHELL_RTT_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_RTT_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_RTT_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_RTT_LOG_LEVEL_OFF
|
Off |
CONFIG_SHELL_RTT_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_RTT_RX_POLL_PERIOD
|
RX polling period (in milliseconds) |
CONFIG_SHELL_STACK_SIZE
|
Shell thread stack size |
CONFIG_SHELL_START_OBSCURED
|
Display asterisk when echoing |
CONFIG_SHELL_STATS
|
Enable shell statistics |
CONFIG_SHELL_TAB
|
Enable the Tab button support in shell |
CONFIG_SHELL_TAB_AUTOCOMPLETION
|
Enable commands autocompletion with the Tab button |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL
|
|
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_DEFAULT
|
System limit (LOG_MAX_LEVEL) |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_NONE
|
None |
CONFIG_SHELL_TELNET_INIT_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_TELNET_LINE_BUF_SIZE
|
Telnet line buffer size |
CONFIG_SHELL_TELNET_LOG_LEVEL
|
|
CONFIG_SHELL_TELNET_LOG_LEVEL_DBG
|
Debug |
CONFIG_SHELL_TELNET_LOG_LEVEL_ERR
|
Error |
CONFIG_SHELL_TELNET_LOG_LEVEL_INF
|
Info |
CONFIG_SHELL_TELNET_LOG_LEVEL_OFF
|
Off |
CONFIG_SHELL_TELNET_LOG_LEVEL_WRN
|
Warning |
CONFIG_SHELL_TELNET_LOG_MESSAGE_QUEUE_SIZE
|
Log message queue size |
CONFIG_SHELL_TELNET_LOG_MESSAGE_QUEUE_TIMEOUT
|
Log message drop timeout (in milliseconds) |
CONFIG_SHELL_TELNET_PORT
|
Telnet port number |
CONFIG_SHELL_TELNET_SEND_TIMEOUT
|
Telnet line send timeout |
CONFIG_SHELL_TELNET_SUPPORT_COMMAND
|
Add support for telnet commands (IAC) [Experimental] |
CONFIG_SHELL_VT100_COLORS
|
Enable colors in shell |
CONFIG_SHELL_VT100_COMMANDS
|
Enable VT100 commands in shell |
CONFIG_SHELL_WILDCARD
|
Enable wildcard support in shell |
CONFIG_SHIELD_ADAFRUIT_2_8_TFT_TOUCH_V2
|
|
CONFIG_SHIELD_ADAFRUIT_WINC1500
|
|
CONFIG_SHIELD_ATMEL_RF2XX
|
|
CONFIG_SHIELD_ATMEL_RF2XX_ARDUINO
|
|
CONFIG_SHIELD_ATMEL_RF2XX_LEGACY
|
|
CONFIG_SHIELD_ATMEL_RF2XX_MIKROBUS
|
|
CONFIG_SHIELD_ATMEL_RF2XX_XPLAINED
|
|
CONFIG_SHIELD_ATMEL_RF2XX_XPRO
|
|
CONFIG_SHIELD_BOOSTXL_ULPSENSE
|
|
CONFIG_SHIELD_BUYDISPLAY_2_8_TFT_TOUCH_ARDUINO
|
|
CONFIG_SHIELD_BUYDISPLAY_3_5_TFT_TOUCH_ARDUINO
|
|
CONFIG_SHIELD_DAC80508_EVM
|
|
CONFIG_SHIELD_DFROBOT_CAN_BUS_V2_0
|
|
CONFIG_SHIELD_ESP_8266
|
|
CONFIG_SHIELD_ESP_8266_ARDUINO
|
|
CONFIG_SHIELD_ESP_8266_MIKROBUS
|
|
CONFIG_SHIELD_FRDM_CR20A
|
|
CONFIG_SHIELD_FRDM_KW41Z
|
|
CONFIG_SHIELD_FRDM_STBC_AGM01
|
|
CONFIG_SHIELD_FTDI_VM800C
|
|
CONFIG_SHIELD_INVENTEK_ESWIFI
|
|
CONFIG_SHIELD_INVENTEK_ESWIFI_ARDUINO_SPI
|
|
CONFIG_SHIELD_INVENTEK_ESWIFI_ARDUINO_UART
|
|
CONFIG_SHIELD_LINK_BOARD_ETH
|
|
CONFIG_SHIELD_LMP90100_EVB
|
|
CONFIG_SHIELD_LS013B7DH03
|
|
CONFIG_SHIELD_MIKROE_ADC_CLICK
|
|
CONFIG_SHIELD_MIKROE_ETH_CLICK
|
|
CONFIG_SHIELD_SEMTECH_SX1272MB2DAS
|
|
CONFIG_SHIELD_SH1106_128X64
|
|
CONFIG_SHIELD_SPARKFUN_SARA_R4
|
|
CONFIG_SHIELD_SSD1306_128X32
|
|
CONFIG_SHIELD_SSD1306_128X64
|
|
CONFIG_SHIELD_SSD1306_128X64_SPI
|
|
CONFIG_SHIELD_ST7735R_ADA_160x128
|
|
CONFIG_SHIELD_ST7789V_TL019FQV01
|
|
CONFIG_SHIELD_ST7789V_WAVESHARE_240X240
|
|
CONFIG_SHIELD_V2C_DAPLINK
|
|
CONFIG_SHIELD_V2C_DAPLINK_CFG
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEH0154A07
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEH0213B1
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEH0213B72
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEH029A1
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEW042T2
|
|
CONFIG_SHIELD_WAVESHARE_EPAPER_GDEW075T7
|
|
CONFIG_SHIELD_WNC_M14A2A
|
|
CONFIG_SHIELD_X_NUCLEO_EEPRMA2
|
|
CONFIG_SHIELD_X_NUCLEO_IDB05A1
|
|
CONFIG_SHIELD_X_NUCLEO_IKS01A1
|
|
CONFIG_SHIELD_X_NUCLEO_IKS01A2
|
|
CONFIG_SHIELD_X_NUCLEO_IKS01A3
|
|
CONFIG_SHIELD_X_NUCLEO_IKS02A1
|
|
CONFIG_SHT3XD
|
SHT3xD Temperature and Humidity Sensor |
CONFIG_SHT3XD_MPS_05
|
0.5 |
CONFIG_SHT3XD_MPS_1
|
1 |
CONFIG_SHT3XD_MPS_10
|
10 |
CONFIG_SHT3XD_MPS_2
|
2 |
CONFIG_SHT3XD_MPS_4
|
4 |
CONFIG_SHT3XD_PERIODIC_MODE
|
periodic data acquisition |
CONFIG_SHT3XD_REPEATABILITY_HIGH
|
high |
CONFIG_SHT3XD_REPEATABILITY_LOW
|
low |
CONFIG_SHT3XD_REPEATABILITY_MEDIUM
|
medium |
CONFIG_SHT3XD_SINGLE_SHOT_MODE
|
single shot |
CONFIG_SHT3XD_THREAD_PRIORITY
|
Thread priority |
CONFIG_SHT3XD_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_SHT3XD_TRIGGER
|
|
CONFIG_SHT3XD_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_SHT3XD_TRIGGER_NONE
|
No trigger |
CONFIG_SHT3XD_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_SHT4X
|
SHT4x Temperature and Humidity Sensor |
CONFIG_SHTCX
|
SHTCX: SHTC1 and SHTC3 Temperature and Humidity Sensor |
CONFIG_SI7006
|
Si7006 Temperature and Humidity Sensor |
CONFIG_SI7055
|
Si7055 Temperature Sensor |
CONFIG_SI7055_ENABLE_CHECKSUM
|
SI7055 Checksum On Measurement |
CONFIG_SI7060
|
SI7060 Temperature Sensor |
CONFIG_SIFIVE_SPI_0_ROM
|
SPI 0 is used to access SPI Flash ROM |
CONFIG_SIMPLELINK_HOST_DRIVER
|
Build the SimpleLink WiFi Host Driver |
CONFIG_SIMULATOR_XTENSA
|
Simulator Configuration |
CONFIG_SIZE_OPTIMIZATIONS
|
Optimize for size |
CONFIG_SJLI_TABLE_SIZE
|
SJLI table size |
CONFIG_SLIP
|
SLIP driver |
CONFIG_SLIP_DRV_NAME
|
SLIP Driver name |
CONFIG_SLIP_LOG_LEVEL
|
|
CONFIG_SLIP_LOG_LEVEL_DBG
|
Debug |
CONFIG_SLIP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_SLIP_LOG_LEVEL_ERR
|
Error |
CONFIG_SLIP_LOG_LEVEL_INF
|
Info |
CONFIG_SLIP_LOG_LEVEL_OFF
|
Off |
CONFIG_SLIP_LOG_LEVEL_WRN
|
Warning |
CONFIG_SLIP_MAC_ADDR
|
MAC address for the interface |
CONFIG_SLIP_STATISTICS
|
SLIP network connection statistics |
CONFIG_SLIP_TAP
|
Use TAP interface to host |
CONFIG_SM351LT
|
SM351LT Magnetoresistive Sensor |
CONFIG_SM351LT_THREAD_PRIORITY
|
Thread priority |
CONFIG_SM351LT_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_SM351LT_TRIGGER
|
|
CONFIG_SM351LT_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_SM351LT_TRIGGER_NONE
|
No trigger |
CONFIG_SM351LT_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_SMP
|
Enable symmetric multithreading support |
CONFIG_SMP_BOOT_DELAY
|
Delay booting secondary cores |
CONFIG_SMS_LOG_LEVEL
|
|
CONFIG_SMS_LOG_LEVEL_DBG
|
Debug |
CONFIG_SMS_LOG_LEVEL_ERR
|
Error |
CONFIG_SMS_LOG_LEVEL_INF
|
Info |
CONFIG_SMS_LOG_LEVEL_OFF
|
Off |
CONFIG_SMS_LOG_LEVEL_WRN
|
Warning |
CONFIG_SNTP
|
SNTP (Simple Network Time Protocol) |
CONFIG_SNTP_LOG_LEVEL
|
|
CONFIG_SNTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_SNTP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_SNTP_LOG_LEVEL_ERR
|
Error |
CONFIG_SNTP_LOG_LEVEL_INF
|
Info |
CONFIG_SNTP_LOG_LEVEL_OFF
|
Off |
CONFIG_SNTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_SOC
|
|
CONFIG_SOCKS
|
SOCKS5 proxy |
CONFIG_SOCKS_LOG_LEVEL
|
|
CONFIG_SOCKS_LOG_LEVEL_DBG
|
Debug |
CONFIG_SOCKS_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_SOCKS_LOG_LEVEL_ERR
|
Error |
CONFIG_SOCKS_LOG_LEVEL_INF
|
Info |
CONFIG_SOCKS_LOG_LEVEL_OFF
|
Off |
CONFIG_SOCKS_LOG_LEVEL_WRN
|
Warning |
CONFIG_SOC_APOLLO_LAKE
|
Intel Apollo Lake Soc |
CONFIG_SOC_ARC_EMSDP
|
Synopsys ARC EM Software Development Platform |
CONFIG_SOC_ARC_HSDK
|
Synopsys ARC HSDK SoC |
CONFIG_SOC_ARC_IOT
|
Synopsys ARC IoT SoC |
CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M1
|
ARM Cortex-M1 DesignStart FPGA |
CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M3
|
ARM Cortex-M3 DesignStart FPGA |
CONFIG_SOC_ATMEL_SAM3X_EXT_MAINCK
|
Atmel SAM3 to use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAM3X_EXT_SLCK
|
Atmel SAM3 to use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAM3X_PLLA_DIVA
|
|
CONFIG_SOC_ATMEL_SAM3X_PLLA_MULA
|
|
CONFIG_SOC_ATMEL_SAM3X_WAIT_MODE
|
Atmel SAM3 goes to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAM4E_EXT_MAINCK
|
Atmel SAM4E to use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAM4E_EXT_SLCK
|
Atmel SAM4E to use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAM4E_PLLA_DIVA
|
PLL DIVA |
CONFIG_SOC_ATMEL_SAM4E_PLLA_MULA
|
PLL MULA |
CONFIG_SOC_ATMEL_SAM4E_WAIT_MODE
|
Atmel SAM4E goes to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAM4S_EXT_MAINCK
|
Atmel SAM4S to use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAM4S_EXT_SLCK
|
Atmel SAM4S to use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAM4S_PLLA_DIVA
|
PLL DIVA |
CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA
|
PLL MULA |
CONFIG_SOC_ATMEL_SAM4S_WAIT_MODE
|
Atmel SAM4S goes to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAMD5X_OSCULP32K_AS_MAIN
|
OSCULP32K |
CONFIG_SOC_ATMEL_SAMD5X_XOSC32K
|
Enable the external 32 kHz crystal oscillator |
CONFIG_SOC_ATMEL_SAMD5X_XOSC32K_AS_MAIN
|
XOSC32K |
CONFIG_SOC_ATMEL_SAMD_OSC8M_AS_MAIN
|
OSC8M |
CONFIG_SOC_ATMEL_SAMD_XOSC
|
Enable the external crystal oscillator |
CONFIG_SOC_ATMEL_SAMD_XOSC32K
|
Enable the external 32 kHz crystal oscillator |
CONFIG_SOC_ATMEL_SAMD_XOSC32K_AS_MAIN
|
XOSC32K |
CONFIG_SOC_ATMEL_SAMD_XOSC_AS_MAIN
|
XOSC |
CONFIG_SOC_ATMEL_SAME70_DISABLE_ERASE_PIN
|
Disable ERASE pin |
CONFIG_SOC_ATMEL_SAME70_EXT_MAINCK
|
Use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAME70_EXT_SLCK
|
Use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAME70_MDIV
|
MDIV |
CONFIG_SOC_ATMEL_SAME70_PLLA_DIVA
|
PLL DIVA |
CONFIG_SOC_ATMEL_SAME70_PLLA_MULA
|
PLL MULA |
CONFIG_SOC_ATMEL_SAME70_REVB
|
|
CONFIG_SOC_ATMEL_SAME70_WAIT_MODE
|
Go to Wait mode instead of Sleep mode |
CONFIG_SOC_ATMEL_SAMV71_DISABLE_ERASE_PIN
|
Disable ERASE pin |
CONFIG_SOC_ATMEL_SAMV71_EXT_MAINCK
|
Use external crystal oscillator for main clock |
CONFIG_SOC_ATMEL_SAMV71_EXT_SLCK
|
Use external crystal oscillator for slow clock |
CONFIG_SOC_ATMEL_SAMV71_MDIV
|
MDIV |
CONFIG_SOC_ATMEL_SAMV71_PLLA_DIVA
|
PLL DIVA |
CONFIG_SOC_ATMEL_SAMV71_PLLA_MULA
|
PLL MULA |
CONFIG_SOC_ATMEL_SAMV71_REVB
|
|
CONFIG_SOC_ATMEL_SAMV71_WAIT_MODE
|
Go to Wait mode instead of Sleep mode |
CONFIG_SOC_ATOM
|
Intel ATOM SoC |
CONFIG_SOC_BCM58400
|
Broadcom BCM58400 |
CONFIG_SOC_BCM58402_A72
|
Broadcom BCM58402 A72 |
CONFIG_SOC_BCM58402_M7
|
Broadcom BCM58402 M7 |
CONFIG_SOC_BEETLE_R0
|
ARM BEETLE R0 |
CONFIG_SOC_CC1352R
|
CC1352R |
CONFIG_SOC_CC2652R
|
CC2652R |
CONFIG_SOC_CC3220SF
|
CC3220SF |
CONFIG_SOC_CC3235SF
|
CC3235SF |
CONFIG_SOC_COMPATIBLE_NRF
|
|
CONFIG_SOC_COMPATIBLE_NRF52832
|
|
CONFIG_SOC_COMPATIBLE_NRF52X
|
|
CONFIG_SOC_DCDC_NRF52X
|
|
CONFIG_SOC_DCDC_NRF53X_APP
|
|
CONFIG_SOC_DCDC_NRF53X_HV
|
|
CONFIG_SOC_DCDC_NRF53X_NET
|
|
CONFIG_SOC_DEPRECATED_RELEASE
|
|
CONFIG_SOC_ELKHART_LAKE
|
Intel Elkhart Lake Soc |
CONFIG_SOC_EMSDP_EM11D
|
Synopsys ARC EM11D of EMSDP |
CONFIG_SOC_EMSDP_EM4
|
Synopsys ARC EM4 of EMSDP |
CONFIG_SOC_EMSDP_EM5D
|
Synopsys ARC EM5D of EMSDP |
CONFIG_SOC_EMSDP_EM6
|
Synopsys ARC EM6 of EMSDP |
CONFIG_SOC_EMSDP_EM7D
|
Synopsys ARC EM7D of EMSDP |
CONFIG_SOC_EMSDP_EM7D_ESP
|
Synopsys ARC EM7D+ESP of EMSDP |
CONFIG_SOC_EMSDP_EM9D
|
Synopsys ARC EM9D of EMSDP |
CONFIG_SOC_EMSK
|
Synopsys ARC EM Starter Kit SoC |
CONFIG_SOC_EMSK_EM11D
|
Synopsys ARC EM11D of EMSK |
CONFIG_SOC_EMSK_EM7D
|
Synopsys ARC EM7D of EMSK |
CONFIG_SOC_EMSK_EM9D
|
Synopsys ARC EM9D of EMSK |
CONFIG_SOC_ENABLE_LFXO
|
Enable LFXO |
CONFIG_SOC_EOS_S3
|
QuickLogic EOS S3 SoC |
CONFIG_SOC_ESP32
|
ESP32 |
CONFIG_SOC_ESP32C3
|
ESP32C3 |
CONFIG_SOC_FAMILY
|
|
CONFIG_SOC_FAMILY_ARM
|
|
CONFIG_SOC_FAMILY_ARM64
|
|
CONFIG_SOC_FAMILY_BCMVK
|
|
CONFIG_SOC_FAMILY_EXX32
|
|
CONFIG_SOC_FAMILY_IMX
|
|
CONFIG_SOC_FAMILY_INTEL_ADSP
|
|
CONFIG_SOC_FAMILY_KINETIS
|
|
CONFIG_SOC_FAMILY_LPC
|
|
CONFIG_SOC_FAMILY_LS
|
|
CONFIG_SOC_FAMILY_MEC
|
|
CONFIG_SOC_FAMILY_NPCX
|
|
CONFIG_SOC_FAMILY_NRF
|
|
CONFIG_SOC_FAMILY_NUMICRO
|
|
CONFIG_SOC_FAMILY_PSOC6
|
|
CONFIG_SOC_FAMILY_RCAR
|
|
CONFIG_SOC_FAMILY_RISCV_ITE
|
|
CONFIG_SOC_FAMILY_RISCV_PRIVILEGE
|
|
CONFIG_SOC_FAMILY_SAM
|
|
CONFIG_SOC_FAMILY_SAM0
|
|
CONFIG_SOC_FAMILY_STM32
|
|
CONFIG_SOC_FAMILY_TISIMPLELINK
|
|
CONFIG_SOC_FAMILY_XMC
|
|
CONFIG_SOC_FLASH_ESP32
|
Espressif ESP32 flash driver |
CONFIG_SOC_FLASH_GECKO
|
Silicon Labs Gecko flash driver |
CONFIG_SOC_FLASH_ITE_IT8XXX2
|
ITE IT8XXX2 flash driver |
CONFIG_SOC_FLASH_LPC
|
LPC flash shim driver |
CONFIG_SOC_FLASH_MCUX
|
MCUX flash shim driver |
CONFIG_SOC_FLASH_NIOS2_QSPI
|
Nios-II QSPI flash driver |
CONFIG_SOC_FLASH_NIOS2_QSPI_DEV_NAME
|
Nios-II QSPI flash device name |
CONFIG_SOC_FLASH_NRF
|
Nordic Semiconductor nRF flash driver |
CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS
|
8-bit write block size emulation |
CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE
|
Nordic nRFx flash driver partial erase |
CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE_MS
|
Partial erase timeout in MS |
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_NONE
|
none |
CONFIG_SOC_FLASH_NRF_RADIO_SYNC_TICKER
|
Nordic nRFx flash driver synchronized with radio |
CONFIG_SOC_FLASH_NRF_UICR
|
Access to UICR |
CONFIG_SOC_FLASH_RAMCODE_SECTION
|
|
CONFIG_SOC_FLASH_RV32M1
|
RV32M1 flash shim driver |
CONFIG_SOC_FLASH_SAM
|
Atmel SAM flash driver |
CONFIG_SOC_FLASH_SAM0
|
Atmel SAM0 flash driver |
CONFIG_SOC_FLASH_SAM0_EMULATE_BYTE_PAGES
|
Emulate byte-sized pages |
CONFIG_SOC_FLASH_STM32
|
STM32 flash driver |
CONFIG_SOC_FLASH_STM32_V1
|
|
CONFIG_SOC_FVP_AEMV8R_AARCH64
|
ARM FVP AEMv8R aarch64 simulation |
CONFIG_SOC_FVP_AEMV8R_EL2_INIT
|
ARM FVP AEMv8R EL2 Initialization |
CONFIG_SOC_FVP_AEMV8R_SIMULATE_CPU_PM
|
Simulate CPU Power Management for FVP_BaseR_AEMv8R |
CONFIG_SOC_FVP_BASE_REVC_2XAEMV8A
|
ARM FVP Base RevC 2xAEMv8A AArch64 simulation |
CONFIG_SOC_GECKO_CMU
|
|
CONFIG_SOC_GECKO_CORE
|
|
CONFIG_SOC_GECKO_CRYOTIMER
|
|
CONFIG_SOC_GECKO_EMU
|
|
CONFIG_SOC_GECKO_EMU_DCDC
|
Enable SoC DC/DC regulator |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_BYPASS
|
Bypass |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_OFF
|
DC/DC Off |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_ON
|
DC/DC On |
CONFIG_SOC_GECKO_EMU_DCDC_MODE_UNCONFIGURED
|
Initial / Unconfigured |
CONFIG_SOC_GECKO_GPIO
|
|
CONFIG_SOC_GECKO_HAS_ERRATA_RTCC_E201
|
|
CONFIG_SOC_GECKO_HAS_HFRCO_FREQRANGE
|
|
CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
|
|
CONFIG_SOC_GECKO_I2C
|
|
CONFIG_SOC_GECKO_LETIMER
|
|
CONFIG_SOC_GECKO_LEUART
|
|
CONFIG_SOC_GECKO_MSC
|
|
CONFIG_SOC_GECKO_PRS
|
|
CONFIG_SOC_GECKO_RMU
|
|
CONFIG_SOC_GECKO_RTC
|
|
CONFIG_SOC_GECKO_RTCC
|
|
CONFIG_SOC_GECKO_SE
|
|
CONFIG_SOC_GECKO_TIMER
|
|
CONFIG_SOC_GECKO_TRNG
|
|
CONFIG_SOC_GECKO_USART
|
|
CONFIG_SOC_GECKO_WDOG
|
|
CONFIG_SOC_GR716A
|
GR716A LEON3 fault-tolerant microcontroller |
CONFIG_SOC_HAS_TIMING_FUNCTIONS
|
|
CONFIG_SOC_HFXO_CAP_DEFAULT
|
SoC default |
CONFIG_SOC_HFXO_CAP_EXTERNAL
|
Use external load capacitors |
CONFIG_SOC_HFXO_CAP_INTERNAL
|
Use internal load capacitors |
CONFIG_SOC_HFXO_CAP_INT_VALUE_X2
|
Doubled value of HFXO internal load capacitors (in pF) |
CONFIG_SOC_IA32
|
Generic IA32 SoC |
CONFIG_SOC_INTEL_CAVS_V15
|
Apollo Lake |
CONFIG_SOC_INTEL_CAVS_V18
|
CAVS v1.8 SoC |
CONFIG_SOC_INTEL_CAVS_V20
|
CAVS v2.0 SoC |
CONFIG_SOC_INTEL_CAVS_V25
|
CAVS v2.5 SoC |
CONFIG_SOC_INTEL_S1000
|
intel_s1000 |
CONFIG_SOC_IT8XXX2
|
ITE IT8XXX2 system implementation |
CONFIG_SOC_IT8XXX2_EXT_32K
|
Use external 32.768 kHz clock source |
CONFIG_SOC_IT8XXX2_INT_32K
|
Use the +/-2.3% internal clock generator |
CONFIG_SOC_IT8XXX2_PLL_FLASH_48M
|
Flash frequency is 48MHz |
CONFIG_SOC_JH7100
|
Starfive JH7100 |
CONFIG_SOC_LAKEMONT
|
Intel Lakemont SoC |
CONFIG_SOC_LEON3
|
A LEON3 SOC which you can configure |
CONFIG_SOC_LFXO_CAP_EXTERNAL
|
Use external load capacitors |
CONFIG_SOC_LFXO_CAP_INT_6PF
|
6 pF internal load capacitance |
CONFIG_SOC_LFXO_CAP_INT_7PF
|
7 pF internal load capacitance |
CONFIG_SOC_LFXO_CAP_INT_9PF
|
9 pF internal load capacitance |
CONFIG_SOC_LOG_LEVEL
|
|
CONFIG_SOC_LOG_LEVEL_DBG
|
Debug |
CONFIG_SOC_LOG_LEVEL_ERR
|
Error |
CONFIG_SOC_LOG_LEVEL_INF
|
Info |
CONFIG_SOC_LOG_LEVEL_OFF
|
Off |
CONFIG_SOC_LOG_LEVEL_WRN
|
Warning |
CONFIG_SOC_LPC11U66
|
SOC_LPC11U66 |
CONFIG_SOC_LPC11U67
|
SOC_LPC11U67 |
CONFIG_SOC_LPC11U68
|
SOC_LPC11U68 |
CONFIG_SOC_LPC54114_M0
|
SOC_LPC54114_M0 |
CONFIG_SOC_LPC54114_M4
|
SOC_LPC54114_M4 |
CONFIG_SOC_LPC55S16
|
SOC_LPC55S16 M33 |
CONFIG_SOC_LPC55S28
|
SOC_LPC55S28 M33 |
CONFIG_SOC_LPC55S69_CPU0
|
SOC_LPC55S69 M33 [CPU 0] |
CONFIG_SOC_LPC55S69_CPU1
|
SOC_LPC55S69 M33 [CPU 1] |
CONFIG_SOC_LS1046A
|
NXP ls1046a |
CONFIG_SOC_M487
|
M487 |
CONFIG_SOC_MCIMX6X_M4
|
SOC_MCIMX6X_M4 |
CONFIG_SOC_MCIMX7_M4
|
SOC_MCIMX7_M4 |
CONFIG_SOC_MEC1501_DEBUG_AND_ETM_TRACING
|
Debug support via Serial wire debug |
CONFIG_SOC_MEC1501_DEBUG_AND_SWV_TRACING
|
debug support via Serial Wire Debug and Viewer |
CONFIG_SOC_MEC1501_DEBUG_AND_TRACING
|
Debug support via Serial wire debug with tracing enabled |
CONFIG_SOC_MEC1501_DEBUG_DISABLED
|
Disable debug support |
CONFIG_SOC_MEC1501_DEBUG_WITHOUT_TRACING
|
Debug support via Serial wire debug |
CONFIG_SOC_MEC1501_EXT_32K
|
Use external 32KHz clock source |
CONFIG_SOC_MEC1501_EXT_32K_CRYSTAL
|
External 32KHz is a crystal |
CONFIG_SOC_MEC1501_EXT_32K_PARALLEL_CRYSTAL
|
Use parallel connected 32KHz crystal |
CONFIG_SOC_MEC1501_HSZ
|
MEC1501_HSZ |
CONFIG_SOC_MEC1501_PROC_CLK_DIV
|
PROC_CLK_DIV |
CONFIG_SOC_MEC1501_VCI_PINS_AS_GPIOS
|
Use VCI block pins as GPIOS |
CONFIG_SOC_MEC1501_VTR3_1_8V
|
VTR3 power rail is tied to 1.8V |
CONFIG_SOC_MEC1701_QSZ
|
MEC1701_QSZ |
CONFIG_SOC_MEC172X_NSZ
|
MEC172X_NSZ |
CONFIG_SOC_MEC172X_PROC_CLK_DIV
|
PROC_CLK_DIV |
CONFIG_SOC_MIMX8MM6
|
SOC_MIMX8MM6 |
CONFIG_SOC_MIMXRT1011
|
SOC_MIMXRT1011 |
CONFIG_SOC_MIMXRT1015
|
SOC_MIMXRT1015 |
CONFIG_SOC_MIMXRT1021
|
SOC_MIMXRT1021 |
CONFIG_SOC_MIMXRT1024
|
SOC_MIMXRT1024 |
CONFIG_SOC_MIMXRT1051
|
SOC_MIMXRT1051 |
CONFIG_SOC_MIMXRT1052
|
SOC_MIMXRT1052 |
CONFIG_SOC_MIMXRT1061
|
SOC_MIMXRT1061 |
CONFIG_SOC_MIMXRT1062
|
SOC_MIMXRT1062 |
CONFIG_SOC_MIMXRT1064
|
SOC_MIMXRT1064 |
CONFIG_SOC_MIMXRT1176_CM4
|
SOC_MIMXRT1176_CM4 |
CONFIG_SOC_MIMXRT1176_CM7
|
SOC_MIMXRT1176_CM7 |
CONFIG_SOC_MIMXRT685S_CM33
|
SOC_MIMXRT685S M33 |
CONFIG_SOC_MK22F51212
|
SOC_MK22F51212 |
CONFIG_SOC_MK64F12
|
SOC_MK64F12 |
CONFIG_SOC_MK66F18
|
SOC_MK66F18 |
CONFIG_SOC_MK80F25615
|
MK80F25615 |
CONFIG_SOC_MK82F25615
|
MK82F25615 |
CONFIG_SOC_MKE14F16
|
MKE14F16 |
CONFIG_SOC_MKE16F16
|
MKE16F16 |
CONFIG_SOC_MKE18F16
|
MKE18F16 |
CONFIG_SOC_MKL25Z4
|
SOC_MKL25Z4 |
CONFIG_SOC_MKV56F24
|
MKV56F24 |
CONFIG_SOC_MKV58F24
|
MKV58F24 |
CONFIG_SOC_MKW22D5
|
SOC_MKW22D5 |
CONFIG_SOC_MKW24D5
|
SOC_MKW24D5 |
CONFIG_SOC_MKW40Z4
|
SOC_MKW40Z4 |
CONFIG_SOC_MKW41Z4
|
SOC_MKW41Z4 |
CONFIG_SOC_MPS2_AN385
|
ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385) |
CONFIG_SOC_MPS2_AN521
|
|
CONFIG_SOC_MPS2_AN521_CPU0
|
ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU0 |
CONFIG_SOC_MPS2_AN521_CPU1
|
ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU1 |
CONFIG_SOC_MPS3_AN547
|
Arm Cortex-M55 SSE-300 on MPS3 (AN547) |
CONFIG_SOC_MSP432P401R
|
MSP432P401R |
CONFIG_SOC_NIOS2F_ZEPHYR
|
Nios IIf - Zephyr Golden Configuration |
CONFIG_SOC_NIOS2_QEMU
|
Nios II - Experimental QEMU emulation |
CONFIG_SOC_NPCX7M6FB
|
NPCX7M6FB |
CONFIG_SOC_NPCX7M6FC
|
NPCX7M6FC |
CONFIG_SOC_NPCX7M7FC
|
NPCX7M7FC |
CONFIG_SOC_NPCX9M3F
|
NPCX9M3F |
CONFIG_SOC_NPCX9M6F
|
NPCX9M6F |
CONFIG_SOC_NRF51822_QFAA
|
NRF51822_QFAA |
CONFIG_SOC_NRF51822_QFAB
|
NRF51822_QFAB |
CONFIG_SOC_NRF51822_QFAC
|
NRF51822_QFAC |
CONFIG_SOC_NRF52805
|
|
CONFIG_SOC_NRF52805_CAAA
|
NRF52805_CAAA |
CONFIG_SOC_NRF52810
|
|
CONFIG_SOC_NRF52810_QFAA
|
NRF52810_QFAA |
CONFIG_SOC_NRF52811
|
|
CONFIG_SOC_NRF52811_QFAA
|
NRF52811_QFAA |
CONFIG_SOC_NRF52820
|
|
CONFIG_SOC_NRF52820_QDAA
|
NRF52820_QDAA |
CONFIG_SOC_NRF52832
|
|
CONFIG_SOC_NRF52832_ALLOW_SPIM_DESPITE_PAN_58
|
Allow enabling the SPIM driver despite PAN 58 |
CONFIG_SOC_NRF52832_CIAA
|
NRF52832_CIAA |
CONFIG_SOC_NRF52832_QFAA
|
NRF52832_QFAA |
CONFIG_SOC_NRF52832_QFAB
|
NRF52832_QFAB |
CONFIG_SOC_NRF52833
|
|
CONFIG_SOC_NRF52833_QIAA
|
NRF52833_QIAA |
CONFIG_SOC_NRF52840
|
|
CONFIG_SOC_NRF52840_QIAA
|
NRF52840_QIAA |
CONFIG_SOC_NRF5340_CPUAPP
|
|
CONFIG_SOC_NRF5340_CPUAPP_QKAA
|
NRF5340_CPUAPP_QKAA |
CONFIG_SOC_NRF5340_CPUNET
|
|
CONFIG_SOC_NRF5340_CPUNET_QKAA
|
NRF5340_CPUNET_QKAA |
CONFIG_SOC_NRF9160
|
|
CONFIG_SOC_NRF9160_SICA
|
NRF9160_SICA |
CONFIG_SOC_NSIM
|
Synopsys nSIM simulator for ARC cores |
CONFIG_SOC_NSIM_EM
|
Synopsys ARC EM in nSIM |
CONFIG_SOC_NSIM_EM7D_V22
|
Synopsys ARC EM7D_V22 in nSIM |
CONFIG_SOC_NSIM_HS
|
Synopsys ARC HS in nSIM |
CONFIG_SOC_NSIM_HS6X
|
Synopsys ARC HS6x in nSIM |
CONFIG_SOC_NSIM_HS_SMP
|
Multi-core Synopsys ARC HS in nSIM |
CONFIG_SOC_NSIM_SEM
|
Synopsys ARC SEM in nSIM |
CONFIG_SOC_OPENISA_RV32M1_RI5CY
|
OpenISA RV32M1 RI5CY core |
CONFIG_SOC_OPENISA_RV32M1_RISCV32
|
OpenISA RV32M1 RISC-V cores |
CONFIG_SOC_OPENISA_RV32M1_ZERO_RISCY
|
OpenISA RV32M1 ZERO-RISCY core |
CONFIG_SOC_PART_NUMBER
|
|
CONFIG_SOC_PART_NUMBER_CY8C6247BZI_D54
|
CY8C6247BZI_D54 |
CONFIG_SOC_PART_NUMBER_CY8C6347BZI_BLD53
|
CY8C6347BZI_BLD53 |
CONFIG_SOC_PART_NUMBER_EFM32GG11B820F2048GL192
|
|
CONFIG_SOC_PART_NUMBER_EFM32GG11B820F2048GM64
|
|
CONFIG_SOC_PART_NUMBER_EFM32HG322F64
|
|
CONFIG_SOC_PART_NUMBER_EFM32JG12B500F1024GL125
|
|
CONFIG_SOC_PART_NUMBER_EFM32PG12B500F1024GL125
|
|
CONFIG_SOC_PART_NUMBER_EFM32PG1B200F256GM48
|
|
CONFIG_SOC_PART_NUMBER_EFM32WG990F256
|
|
CONFIG_SOC_PART_NUMBER_EFR32BG13P632F512GM48
|
|
CONFIG_SOC_PART_NUMBER_EFR32FG13P233F512GM48
|
|
CONFIG_SOC_PART_NUMBER_EFR32FG1P133F256GM48
|
|
CONFIG_SOC_PART_NUMBER_EFR32MG12P332F1024GL125
|
|
CONFIG_SOC_PART_NUMBER_EFR32MG21A020F1024IM32
|
|
CONFIG_SOC_PART_NUMBER_F100X1024
|
|
CONFIG_SOC_PART_NUMBER_IMX7_M4
|
|
CONFIG_SOC_PART_NUMBER_IMX8MM_M4
|
|
CONFIG_SOC_PART_NUMBER_IMX_6X_M4
|
|
CONFIG_SOC_PART_NUMBER_IMX_RT
|
|
CONFIG_SOC_PART_NUMBER_IMX_RT6XX
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_K2X
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_K6X
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_K8X
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_KE1XF
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_KL2X
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_KV5X
|
|
CONFIG_SOC_PART_NUMBER_KINETIS_KWX
|
|
CONFIG_SOC_PART_NUMBER_LPC11U66JBD48
|
|
CONFIG_SOC_PART_NUMBER_LPC11U67JBD100
|
|
CONFIG_SOC_PART_NUMBER_LPC11U67JBD48
|
|
CONFIG_SOC_PART_NUMBER_LPC11U67JBD64
|
|
CONFIG_SOC_PART_NUMBER_LPC11U68JBD100
|
|
CONFIG_SOC_PART_NUMBER_LPC11U68JBD48
|
|
CONFIG_SOC_PART_NUMBER_LPC11U68JBD64
|
|
CONFIG_SOC_PART_NUMBER_LPC11U6X
|
|
CONFIG_SOC_PART_NUMBER_LPC54114J256BD64
|
|
CONFIG_SOC_PART_NUMBER_LPC54XXX
|
|
CONFIG_SOC_PART_NUMBER_LPC55S16JBD100
|
|
CONFIG_SOC_PART_NUMBER_LPC55S28JBD100
|
|
CONFIG_SOC_PART_NUMBER_LPC55S69JBD100
|
|
CONFIG_SOC_PART_NUMBER_LPC55S69JET98
|
|
CONFIG_SOC_PART_NUMBER_LPC55XXX
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVK10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVK10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVO10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X1EVO10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X2EVN10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X2EVN10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVK10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVK10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVN10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVN10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVO10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X3EVO10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X4EVM10AB
|
|
CONFIG_SOC_PART_NUMBER_MCIMX6X4EVM10AC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX7D5EVM10SC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX7D7DVM10SC
|
|
CONFIG_SOC_PART_NUMBER_MCIMX7S3DVK08SA
|
|
CONFIG_SOC_PART_NUMBER_MIMX8MM6DVTLZ
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1011CAE4A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1011DAE5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1015CAF4A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1015DAF5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021CAF4A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021CAG4A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021DAF5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1021DAG5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1024CAG4A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1024DAG5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1051CVL5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1051DVL6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVJ5B
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVL5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052CVL5B
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVJ6B
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVL6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1052DVL6B
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1061CVL5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1061DVL6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1062CVL5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1062DVJ6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1062DVL6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1064CVL5A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1064DVL6A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1171AVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1171CVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1171DVMAA
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1172AVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1172CVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1172DVMAA
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1173CVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1175AVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1175CVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1175DVMAA
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1176AVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1176CVM8A
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT1176DVMAA
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT685SFAWBR
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT685SFFOB
|
|
CONFIG_SOC_PART_NUMBER_MIMXRT685SFVKB
|
|
CONFIG_SOC_PART_NUMBER_MK22FN512VLH12
|
|
CONFIG_SOC_PART_NUMBER_MK22FX512AVLK12
|
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0CAJ12
|
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VDC12
|
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VLL12
|
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VLQ12
|
|
CONFIG_SOC_PART_NUMBER_MK64FN1M0VMD12
|
|
CONFIG_SOC_PART_NUMBER_MK64FX512VDC12
|
|
CONFIG_SOC_PART_NUMBER_MK64FX512VLL12
|
|
CONFIG_SOC_PART_NUMBER_MK64FX512VLQ12
|
|
CONFIG_SOC_PART_NUMBER_MK64FX512VMD12
|
|
CONFIG_SOC_PART_NUMBER_MK66FN2M0VMD18
|
|
CONFIG_SOC_PART_NUMBER_MK80FN256VDC15
|
|
CONFIG_SOC_PART_NUMBER_MK80FN256VLL15
|
|
CONFIG_SOC_PART_NUMBER_MK82FN256VDC15
|
|
CONFIG_SOC_PART_NUMBER_MK82FN256VLL15
|
|
CONFIG_SOC_PART_NUMBER_MKE14F256VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE14F256VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKE14F512VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE14F512VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKE16F256VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE16F256VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKE16F512VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE16F512VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKE18F256VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE18F256VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKE18F512VLH16
|
|
CONFIG_SOC_PART_NUMBER_MKE18F512VLL16
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VFM4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VFT4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VLH4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z128VLK4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VFM4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VFT4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VLH4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z32VLK4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VFM4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VFT4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VLH4
|
|
CONFIG_SOC_PART_NUMBER_MKL25Z64VLK4
|
|
CONFIG_SOC_PART_NUMBER_MKV56F1M0VLL24
|
|
CONFIG_SOC_PART_NUMBER_MKV56F1M0VLQ24
|
|
CONFIG_SOC_PART_NUMBER_MKV56F512VLL24
|
|
CONFIG_SOC_PART_NUMBER_MKV56F512VLQ24
|
|
CONFIG_SOC_PART_NUMBER_MKV58F1M0VLL24
|
|
CONFIG_SOC_PART_NUMBER_MKV58F1M0VLQ24
|
|
CONFIG_SOC_PART_NUMBER_MKV58F512VLL24
|
|
CONFIG_SOC_PART_NUMBER_MKV58F512VLQ24
|
|
CONFIG_SOC_PART_NUMBER_MKW22D512VHA5
|
|
CONFIG_SOC_PART_NUMBER_MKW24D512VHA5
|
|
CONFIG_SOC_PART_NUMBER_MKW40Z160VHT4
|
|
CONFIG_SOC_PART_NUMBER_MKW41Z256VHT4
|
|
CONFIG_SOC_PART_NUMBER_MKW41Z512VHT4
|
|
CONFIG_SOC_PART_NUMBER_SAM3X4C
|
SAM3X4C |
CONFIG_SOC_PART_NUMBER_SAM3X4E
|
SAM3X4E |
CONFIG_SOC_PART_NUMBER_SAM3X8C
|
SAM3X8C |
CONFIG_SOC_PART_NUMBER_SAM3X8E
|
SAM3X8E |
CONFIG_SOC_PART_NUMBER_SAM3X8H
|
SAM3X8H |
CONFIG_SOC_PART_NUMBER_SAM4E16C
|
SAM4E16C |
CONFIG_SOC_PART_NUMBER_SAM4E16E
|
SAM4E16E |
CONFIG_SOC_PART_NUMBER_SAM4E8C
|
SAM4E8C |
CONFIG_SOC_PART_NUMBER_SAM4E8E
|
SAM4E8E |
CONFIG_SOC_PART_NUMBER_SAM4LC2A
|
SAM4LC2A |
CONFIG_SOC_PART_NUMBER_SAM4LC2B
|
SAM4LC2B |
CONFIG_SOC_PART_NUMBER_SAM4LC2C
|
SAM4LC2C |
CONFIG_SOC_PART_NUMBER_SAM4LC4A
|
SAM4LC4A |
CONFIG_SOC_PART_NUMBER_SAM4LC4B
|
SAM4LC4B |
CONFIG_SOC_PART_NUMBER_SAM4LC4C
|
SAM4LC4C |
CONFIG_SOC_PART_NUMBER_SAM4LC8A
|
SAM4LC8A |
CONFIG_SOC_PART_NUMBER_SAM4LC8B
|
SAM4LC8B |
CONFIG_SOC_PART_NUMBER_SAM4LC8C
|
SAM4LC8C |
CONFIG_SOC_PART_NUMBER_SAM4LS2A
|
SAM4LS2A |
CONFIG_SOC_PART_NUMBER_SAM4LS2B
|
SAM4LS2B |
CONFIG_SOC_PART_NUMBER_SAM4LS2C
|
SAM4LS2C |
CONFIG_SOC_PART_NUMBER_SAM4LS4A
|
SAM4LS4A |
CONFIG_SOC_PART_NUMBER_SAM4LS4B
|
SAM4LS4B |
CONFIG_SOC_PART_NUMBER_SAM4LS4C
|
SAM4LS4C |
CONFIG_SOC_PART_NUMBER_SAM4LS8A
|
SAM4LS8A |
CONFIG_SOC_PART_NUMBER_SAM4LS8B
|
SAM4LS8B |
CONFIG_SOC_PART_NUMBER_SAM4LS8C
|
SAM4LS8C |
CONFIG_SOC_PART_NUMBER_SAM4S16B
|
SAM4S16B |
CONFIG_SOC_PART_NUMBER_SAM4S16C
|
SAM4S16C |
CONFIG_SOC_PART_NUMBER_SAM4S2A
|
SAM4S2A |
CONFIG_SOC_PART_NUMBER_SAM4S2B
|
SAM4S2B |
CONFIG_SOC_PART_NUMBER_SAM4S2C
|
SAM4S2C |
CONFIG_SOC_PART_NUMBER_SAM4S4A
|
SAM4S4A |
CONFIG_SOC_PART_NUMBER_SAM4S4B
|
SAM4S4B |
CONFIG_SOC_PART_NUMBER_SAM4S4C
|
SAM4S4C |
CONFIG_SOC_PART_NUMBER_SAM4S8B
|
SAM4S8B |
CONFIG_SOC_PART_NUMBER_SAM4S8C
|
SAM4S8C |
CONFIG_SOC_PART_NUMBER_SAMD20E14
|
SAMD20E14 |
CONFIG_SOC_PART_NUMBER_SAMD20E15
|
SAMD20E15 |
CONFIG_SOC_PART_NUMBER_SAMD20E16
|
SAMD20E16 |
CONFIG_SOC_PART_NUMBER_SAMD20E17
|
SAMD20E17 |
CONFIG_SOC_PART_NUMBER_SAMD20E18
|
SAMD20E18 |
CONFIG_SOC_PART_NUMBER_SAMD20G14
|
SAMD20G14 |
CONFIG_SOC_PART_NUMBER_SAMD20G15
|
SAMD20G15 |
CONFIG_SOC_PART_NUMBER_SAMD20G16
|
SAMD20G16 |
CONFIG_SOC_PART_NUMBER_SAMD20G17
|
SAMD20G17 |
CONFIG_SOC_PART_NUMBER_SAMD20G17U
|
SAMD20G17U |
CONFIG_SOC_PART_NUMBER_SAMD20G18
|
SAMD20G18 |
CONFIG_SOC_PART_NUMBER_SAMD20G18U
|
SAMD20G18U |
CONFIG_SOC_PART_NUMBER_SAMD20J14
|
SAMD20J14 |
CONFIG_SOC_PART_NUMBER_SAMD20J15
|
SAMD20J15 |
CONFIG_SOC_PART_NUMBER_SAMD20J16
|
SAMD20J16 |
CONFIG_SOC_PART_NUMBER_SAMD20J17
|
SAMD20J17 |
CONFIG_SOC_PART_NUMBER_SAMD20J18
|
SAMD20J18 |
CONFIG_SOC_PART_NUMBER_SAMD21E15A
|
SAMD21E15A |
CONFIG_SOC_PART_NUMBER_SAMD21E16A
|
SAMD21E16A |
CONFIG_SOC_PART_NUMBER_SAMD21E17A
|
SAMD21E17A |
CONFIG_SOC_PART_NUMBER_SAMD21E18A
|
SAMD21E18A |
CONFIG_SOC_PART_NUMBER_SAMD21G15A
|
SAMD21G15A |
CONFIG_SOC_PART_NUMBER_SAMD21G16A
|
SAMD21G16A |
CONFIG_SOC_PART_NUMBER_SAMD21G17A
|
SAMD21G17A |
CONFIG_SOC_PART_NUMBER_SAMD21G17AU
|
SAMD21G17AU |
CONFIG_SOC_PART_NUMBER_SAMD21G18A
|
SAMD21G18A |
CONFIG_SOC_PART_NUMBER_SAMD21G18AU
|
SAMD21G18AU |
CONFIG_SOC_PART_NUMBER_SAMD21J15A
|
SAMD21J15A |
CONFIG_SOC_PART_NUMBER_SAMD21J16A
|
SAMD21J16A |
CONFIG_SOC_PART_NUMBER_SAMD21J17A
|
SAMD21J17A |
CONFIG_SOC_PART_NUMBER_SAMD21J18A
|
SAMD21J18A |
CONFIG_SOC_PART_NUMBER_SAMD51G18A
|
SAMD51G18A |
CONFIG_SOC_PART_NUMBER_SAMD51G19A
|
SAMD51G19A |
CONFIG_SOC_PART_NUMBER_SAMD51J18A
|
SAMD51J18A |
CONFIG_SOC_PART_NUMBER_SAMD51J19A
|
SAMD51J19A |
CONFIG_SOC_PART_NUMBER_SAMD51J20A
|
SAMD51J20A |
CONFIG_SOC_PART_NUMBER_SAMD51N19A
|
SAMD51N19A |
CONFIG_SOC_PART_NUMBER_SAMD51N20A
|
SAMD51N20A |
CONFIG_SOC_PART_NUMBER_SAMD51P19A
|
SAMD51P19A |
CONFIG_SOC_PART_NUMBER_SAMD51P20A
|
SAMD51P20A |
CONFIG_SOC_PART_NUMBER_SAME51J18A
|
SAME51J18A |
CONFIG_SOC_PART_NUMBER_SAME51J19A
|
SAME51J19A |
CONFIG_SOC_PART_NUMBER_SAME51J20A
|
SAME51J20A |
CONFIG_SOC_PART_NUMBER_SAME51N19A
|
SAME51N19A |
CONFIG_SOC_PART_NUMBER_SAME51N20A
|
SAME51N20A |
CONFIG_SOC_PART_NUMBER_SAME53J18A
|
SAME53J18A |
CONFIG_SOC_PART_NUMBER_SAME53J19A
|
SAME53J19A |
CONFIG_SOC_PART_NUMBER_SAME53J20A
|
SAME53J20A |
CONFIG_SOC_PART_NUMBER_SAME53N19A
|
SAME53N19A |
CONFIG_SOC_PART_NUMBER_SAME53N20A
|
SAME53N20A |
CONFIG_SOC_PART_NUMBER_SAME54N19A
|
SAME54N19A |
CONFIG_SOC_PART_NUMBER_SAME54N20A
|
SAME54N20A |
CONFIG_SOC_PART_NUMBER_SAME54P19A
|
SAME54P19A |
CONFIG_SOC_PART_NUMBER_SAME54P20A
|
SAME54P20A |
CONFIG_SOC_PART_NUMBER_SAME70J19
|
SAME70J19 |
CONFIG_SOC_PART_NUMBER_SAME70J19B
|
SAME70J19B |
CONFIG_SOC_PART_NUMBER_SAME70J20
|
SAME70J20 |
CONFIG_SOC_PART_NUMBER_SAME70J20B
|
SAME70J20B |
CONFIG_SOC_PART_NUMBER_SAME70J21
|
SAME70J21 |
CONFIG_SOC_PART_NUMBER_SAME70J21B
|
SAME70J21B |
CONFIG_SOC_PART_NUMBER_SAME70N19
|
SAME70N19 |
CONFIG_SOC_PART_NUMBER_SAME70N19B
|
SAME70N19B |
CONFIG_SOC_PART_NUMBER_SAME70N20
|
SAME70N20 |
CONFIG_SOC_PART_NUMBER_SAME70N20B
|
SAME70N20B |
CONFIG_SOC_PART_NUMBER_SAME70N21
|
SAME70N21 |
CONFIG_SOC_PART_NUMBER_SAME70N21B
|
SAME70N21B |
CONFIG_SOC_PART_NUMBER_SAME70Q19
|
SAME70Q19 |
CONFIG_SOC_PART_NUMBER_SAME70Q19B
|
SAME70Q19B |
CONFIG_SOC_PART_NUMBER_SAME70Q20
|
SAME70Q20 |
CONFIG_SOC_PART_NUMBER_SAME70Q20B
|
SAME70Q20B |
CONFIG_SOC_PART_NUMBER_SAME70Q21
|
SAME70Q21 |
CONFIG_SOC_PART_NUMBER_SAME70Q21B
|
SAME70Q21B |
CONFIG_SOC_PART_NUMBER_SAMR21E16A
|
SAMR21E16A |
CONFIG_SOC_PART_NUMBER_SAMR21E17A
|
SAMR21E17A |
CONFIG_SOC_PART_NUMBER_SAMR21E18A
|
SAMR21E18A |
CONFIG_SOC_PART_NUMBER_SAMR21E19A
|
SAMR21E19A |
CONFIG_SOC_PART_NUMBER_SAMR21G16A
|
SAMR21G16A |
CONFIG_SOC_PART_NUMBER_SAMR21G17A
|
SAMR21G17A |
CONFIG_SOC_PART_NUMBER_SAMR21G18A
|
SAMR21G18A |
CONFIG_SOC_PART_NUMBER_SAMV71J19
|
SAMV71J19 |
CONFIG_SOC_PART_NUMBER_SAMV71J19B
|
SAMV71J19B |
CONFIG_SOC_PART_NUMBER_SAMV71J20
|
SAMV71J20 |
CONFIG_SOC_PART_NUMBER_SAMV71J20B
|
SAMV71J20B |
CONFIG_SOC_PART_NUMBER_SAMV71J21
|
SAMV71J21 |
CONFIG_SOC_PART_NUMBER_SAMV71J21B
|
SAMV71J21B |
CONFIG_SOC_PART_NUMBER_SAMV71N19
|
SAMV71N19 |
CONFIG_SOC_PART_NUMBER_SAMV71N19B
|
SAMV71N19B |
CONFIG_SOC_PART_NUMBER_SAMV71N20
|
SAMV71N20 |
CONFIG_SOC_PART_NUMBER_SAMV71N20B
|
SAMV71N20B |
CONFIG_SOC_PART_NUMBER_SAMV71N21
|
SAMV71N21 |
CONFIG_SOC_PART_NUMBER_SAMV71N21B
|
SAMV71N21B |
CONFIG_SOC_PART_NUMBER_SAMV71Q19
|
SAMV71Q19 |
CONFIG_SOC_PART_NUMBER_SAMV71Q19B
|
SAMV71Q19B |
CONFIG_SOC_PART_NUMBER_SAMV71Q20
|
SAMV71Q20 |
CONFIG_SOC_PART_NUMBER_SAMV71Q20B
|
SAMV71Q20B |
CONFIG_SOC_PART_NUMBER_SAMV71Q21
|
SAMV71Q21 |
CONFIG_SOC_PART_NUMBER_SAMV71Q21B
|
SAMV71Q21B |
CONFIG_SOC_PART_NUMBER_XMC_4XXX
|
|
CONFIG_SOC_POSIX
|
Native POSIX port |
CONFIG_SOC_POWER_MANAGEMENT
|
MEC1501 Power Management |
CONFIG_SOC_POWER_MANAGEMENT_TRACE
|
Trace System Power Management in NPCX family |
CONFIG_SOC_PSOC6_M0
|
SOC_PSOC6_M0 |
CONFIG_SOC_PSOC6_M0_ENABLES_M4
|
Enable dual-core support [activate Cortex-M4] |
CONFIG_SOC_PSOC6_M4
|
SOC_PSOC6_M4 |
CONFIG_SOC_QEMU_ARC
|
QEMU emulation of ARC cores |
CONFIG_SOC_QEMU_ARC_EM
|
Synopsys ARC EM in QEMU |
CONFIG_SOC_QEMU_ARC_HS
|
Synopsys ARC HS in QEMU |
CONFIG_SOC_QEMU_ARC_HS6X
|
Synopsys ARC HS in QEMU |
CONFIG_SOC_QEMU_CORTEX_A53
|
QEMU virt platform (cortex-a53) |
CONFIG_SOC_R8A77951
|
R8A77951 |
CONFIG_SOC_RISCV32_LITEX_VEXRISCV
|
LiteX VexRiscv system implementation |
CONFIG_SOC_RISCV32_MIV
|
Microsemi Mi-V system implementation |
CONFIG_SOC_RISCV_SIFIVE_FREEDOM
|
SiFive Freedom SOC implementation |
CONFIG_SOC_RISCV_TELINK_B91
|
Telink B91 SoC implementation |
CONFIG_SOC_RISCV_VIRT
|
QEMU RISC-V VirtIO Board |
CONFIG_SOC_SERIES
|
|
CONFIG_SOC_SERIES_ARM_DESIGNSTART
|
Arm DesignStart SoC Series |
CONFIG_SOC_SERIES_BEETLE
|
Arm Beetle MCU Series |
CONFIG_SOC_SERIES_BSIM_NRF52X
|
|
CONFIG_SOC_SERIES_BSIM_NRFXX
|
|
CONFIG_SOC_SERIES_CC13X2_CC26X2
|
TI SimpleLink Family CC13x2 / CC26x2 |
CONFIG_SOC_SERIES_CC32XX
|
TI SimpleLink Family |
CONFIG_SOC_SERIES_EFM32GG11B
|
EFM32GG11B Series MCU |
CONFIG_SOC_SERIES_EFM32HG
|
EFM32HG Series MCU |
CONFIG_SOC_SERIES_EFM32JG12B
|
EFM32JG12B Series MCU |
CONFIG_SOC_SERIES_EFM32PG12B
|
EFM32PG12B Series MCU |
CONFIG_SOC_SERIES_EFM32PG1B
|
EFM32PG1B Series MCU |
CONFIG_SOC_SERIES_EFM32WG
|
EFM32WG Series MCU |
CONFIG_SOC_SERIES_EFR32BG13P
|
EFR32BG13P Series MCU |
CONFIG_SOC_SERIES_EFR32FG13P
|
EFR32FG13P Series MCU |
CONFIG_SOC_SERIES_EFR32FG1P
|
EFR32FG1P Series MCU |
CONFIG_SOC_SERIES_EFR32MG12P
|
EFR32MG12P Series MCU |
CONFIG_SOC_SERIES_EFR32MG21
|
EFR32MG21 Series MCU |
CONFIG_SOC_SERIES_FVP_AEMV8A
|
ARM FVP AEMv8A AArch64 Series |
CONFIG_SOC_SERIES_FVP_AEMV8R
|
ARM FVP AEMv8R AArch64 Series |
CONFIG_SOC_SERIES_IMX7_M4
|
i.MX7 M4 Core Series |
CONFIG_SOC_SERIES_IMX8MM_M4
|
i.MX8MM M4 Core Series |
CONFIG_SOC_SERIES_IMX_6X_M4
|
i.MX 6SoloX M4 Core Series |
CONFIG_SOC_SERIES_IMX_RT
|
i.MX RT Series |
CONFIG_SOC_SERIES_IMX_RT10XX
|
i.MX RT 10XX Series |
CONFIG_SOC_SERIES_IMX_RT11XX
|
i.MX RT 11XX Series |
CONFIG_SOC_SERIES_IMX_RT6XX
|
i.MX RT6XX Series Family MCU |
CONFIG_SOC_SERIES_INTEL_CAVS_V15
|
Intel CAVS v1.5 |
CONFIG_SOC_SERIES_INTEL_CAVS_V18
|
Intel CAVS v1.8 |
CONFIG_SOC_SERIES_INTEL_CAVS_V20
|
Intel CAVS v2.0 |
CONFIG_SOC_SERIES_INTEL_CAVS_V25
|
Intel CAVS v2.5 |
CONFIG_SOC_SERIES_KINETIS_K2X
|
Kinetis K2x Series MCU |
CONFIG_SOC_SERIES_KINETIS_K6X
|
Kinetis K6x Series MCU |
CONFIG_SOC_SERIES_KINETIS_K8X
|
Kinetis K8x Series MCU |
CONFIG_SOC_SERIES_KINETIS_KE1XF
|
Kinetis KE1xF Series MCU |
CONFIG_SOC_SERIES_KINETIS_KL2X
|
Kinetis KL2x Series MCU |
CONFIG_SOC_SERIES_KINETIS_KV5X
|
Kinetis KV5x Series MCU |
CONFIG_SOC_SERIES_KINETIS_KWX
|
Kinetis KWx Series MCU |
CONFIG_SOC_SERIES_LPC11U6X
|
LPC LPC11U6X Series MCU |
CONFIG_SOC_SERIES_LPC54XXX
|
LPC LPC54xxx Series MCU |
CONFIG_SOC_SERIES_LPC55XXX
|
LPC5500 Series Family MCU |
CONFIG_SOC_SERIES_LS1046A
|
NXP LS1046A Series |
CONFIG_SOC_SERIES_M48X
|
Nuvoton M48X Series MCU |
CONFIG_SOC_SERIES_MEC1501X
|
Microchip MEC1501X Series |
CONFIG_SOC_SERIES_MEC1701X
|
Microchip MEC1701X Series |
CONFIG_SOC_SERIES_MEC172X
|
Microchip MEC172X Series |
CONFIG_SOC_SERIES_MPS2
|
Arm MPS2 MCU Series |
CONFIG_SOC_SERIES_MPS3
|
Arm MPS3 MCU Series |
CONFIG_SOC_SERIES_MSP432P4XX
|
TI SimpleLink Family MSP432P4XX |
CONFIG_SOC_SERIES_MUSCA_B1
|
Arm v2m MUSCA B1 MCU Series |
CONFIG_SOC_SERIES_MUSCA_S1
|
Arm v2m MUSCA-S1 MCU Series |
CONFIG_SOC_SERIES_NPCX7
|
Nuvoton NPCX7 Series |
CONFIG_SOC_SERIES_NPCX9
|
Nuvoton NPCX9 Series |
CONFIG_SOC_SERIES_NRF51X
|
Nordic Semiconductor nRF51 series MCU |
CONFIG_SOC_SERIES_NRF52X
|
Nordic Semiconductor nRF52 series MCU |
CONFIG_SOC_SERIES_NRF53X
|
Nordic Semiconductor nRF53 series MCU |
CONFIG_SOC_SERIES_NRF91X
|
Nordic Semiconductor nRF91 series MCU |
CONFIG_SOC_SERIES_PSOC62
|
Cypress PSoC6 series MCU - Standard |
CONFIG_SOC_SERIES_PSOC63
|
Cypress PSoC6 series MCU - Bluetooth Low Energy |
CONFIG_SOC_SERIES_RCAR_GEN3
|
Renesas RCAR Gen3 Cortex R7 |
CONFIG_SOC_SERIES_RISCV32_IT8XXX2
|
ITE IT8XXX2 implementation |
CONFIG_SOC_SERIES_RISCV32_MIV
|
Microsemi Mi-V implementation |
CONFIG_SOC_SERIES_RISCV_SIFIVE_FREEDOM
|
SiFive Freedom SOC implementation |
CONFIG_SOC_SERIES_RISCV_TELINK_B91
|
Telink B91 SoC Implementation |
CONFIG_SOC_SERIES_RISCV_VIRT
|
QEMU RISC-V VirtIO Board |
CONFIG_SOC_SERIES_SAM3X
|
Atmel SAM3X MCU |
CONFIG_SOC_SERIES_SAM4E
|
Atmel SAM4E MCU |
CONFIG_SOC_SERIES_SAM4L
|
Atmel SAM4L MCU |
CONFIG_SOC_SERIES_SAM4S
|
Atmel SAM4S MCU |
CONFIG_SOC_SERIES_SAMD20
|
Atmel SAMD20 MCU |
CONFIG_SOC_SERIES_SAMD21
|
Atmel SAMD21 MCU |
CONFIG_SOC_SERIES_SAMD51
|
Atmel SAMD51 MCU |
CONFIG_SOC_SERIES_SAME51
|
Atmel SAME51 MCU |
CONFIG_SOC_SERIES_SAME53
|
Atmel SAME53 MCU |
CONFIG_SOC_SERIES_SAME54
|
Atmel SAME54 MCU |
CONFIG_SOC_SERIES_SAME70
|
Atmel SAME70 MCU |
CONFIG_SOC_SERIES_SAMR21
|
Atmel SAMR21 MCU |
CONFIG_SOC_SERIES_SAMV71
|
Atmel SAMV71 MCU |
CONFIG_SOC_SERIES_STARFIVE_JH71XX
|
Starfive JH71XX series |
CONFIG_SOC_SERIES_STM32F0X
|
STM32F0x Series MCU |
CONFIG_SOC_SERIES_STM32F1X
|
STM32F1x Series MCU |
CONFIG_SOC_SERIES_STM32F2X
|
STM32F2x Series MCU |
CONFIG_SOC_SERIES_STM32F3X
|
STM32F3x Series MCU |
CONFIG_SOC_SERIES_STM32F4X
|
STM32F4x Series MCU |
CONFIG_SOC_SERIES_STM32F7X
|
STM32F7x Series MCU |
CONFIG_SOC_SERIES_STM32G0X
|
STM32G0x Series MCU |
CONFIG_SOC_SERIES_STM32G4X
|
STM32G4x Series MCU |
CONFIG_SOC_SERIES_STM32H7X
|
STM32H7x Series MCU |
CONFIG_SOC_SERIES_STM32L0X
|
STM32L0x Series MCU |
CONFIG_SOC_SERIES_STM32L1X
|
STM32L1x Series MCU |
CONFIG_SOC_SERIES_STM32L4X
|
STM32L4x Series MCU |
CONFIG_SOC_SERIES_STM32L5X
|
STM32L5x Series MCU |
CONFIG_SOC_SERIES_STM32MP1X
|
STM32MP15 Series MPU |
CONFIG_SOC_SERIES_STM32WBX
|
STM32WBx Series MCU |
CONFIG_SOC_SERIES_STM32WLX
|
STM32WLx Series MCU |
CONFIG_SOC_SERIES_VALKYRIE
|
Broadcom Valkyrie Series |
CONFIG_SOC_SERIES_VIPER
|
Broadcom Viper Series |
CONFIG_SOC_SERIES_XMC_4XXX
|
XMC 4xxx Series MCU |
CONFIG_SOC_SPARC_LEON
|
|
CONFIG_SOC_STM32F030X4
|
STM32F030X4 |
CONFIG_SOC_STM32F030X8
|
STM32F030X8 |
CONFIG_SOC_STM32F030XC
|
STM32F030XC |
CONFIG_SOC_STM32F031X6
|
STM32F031X6 |
CONFIG_SOC_STM32F051X8
|
STM32F051X8 |
CONFIG_SOC_STM32F070XB
|
STM32F070XB |
CONFIG_SOC_STM32F072XB
|
STM32F072XB |
CONFIG_SOC_STM32F091XC
|
STM32F091XC |
CONFIG_SOC_STM32F098XX
|
STM32F098XX |
CONFIG_SOC_STM32F100XB
|
STM32F100XB |
CONFIG_SOC_STM32F100XE
|
STM32F100XE |
CONFIG_SOC_STM32F103X8
|
STM32F103X8 |
CONFIG_SOC_STM32F103XB
|
STM32F103XB |
CONFIG_SOC_STM32F103XE
|
STM32F103XE |
CONFIG_SOC_STM32F105XC
|
STM32F105XC |
CONFIG_SOC_STM32F107XC
|
STM32F107XC |
CONFIG_SOC_STM32F10X_CONNECTIVITY_LINE_DEVICE
|
|
CONFIG_SOC_STM32F10X_DENSITY_DEVICE
|
|
CONFIG_SOC_STM32F205XX
|
STM32F205XX |
CONFIG_SOC_STM32F207XX
|
STM32F207XX |
CONFIG_SOC_STM32F302X8
|
STM32F302X8 |
CONFIG_SOC_STM32F303X8
|
STM32F303X8 |
CONFIG_SOC_STM32F303XC
|
STM32F303XC |
CONFIG_SOC_STM32F303XE
|
STM32F303XE |
CONFIG_SOC_STM32F334X8
|
STM32F334X8 |
CONFIG_SOC_STM32F373XC
|
STM32F373XC |
CONFIG_SOC_STM32F401XC
|
STM32F401XC |
CONFIG_SOC_STM32F401XE
|
STM32F401XE |
CONFIG_SOC_STM32F405XG
|
STM32F405XG |
CONFIG_SOC_STM32F407XE
|
STM32F407XE |
CONFIG_SOC_STM32F407XG
|
STM32F407XG |
CONFIG_SOC_STM32F410RX
|
STM32F410RX |
CONFIG_SOC_STM32F411XE
|
STM32F411XE |
CONFIG_SOC_STM32F412CG
|
STM32F412CG |
CONFIG_SOC_STM32F412ZG
|
STM32F412ZG |
CONFIG_SOC_STM32F413XX
|
STM32F413XX |
CONFIG_SOC_STM32F415XX
|
STM32F415XX |
CONFIG_SOC_STM32F417XX
|
STM32F417XX |
CONFIG_SOC_STM32F427XX
|
STM32F427XI |
CONFIG_SOC_STM32F429XX
|
STM32F429XI |
CONFIG_SOC_STM32F437XX
|
STM32F437XX |
CONFIG_SOC_STM32F446XX
|
STM32F446XX |
CONFIG_SOC_STM32F469XX
|
STM32F469XX |
CONFIG_SOC_STM32F723XX
|
STM32F723XX |
CONFIG_SOC_STM32F745XX
|
STM32F745XX |
CONFIG_SOC_STM32F746XX
|
STM32F746XX |
CONFIG_SOC_STM32F756XX
|
STM32F756XX |
CONFIG_SOC_STM32F767XX
|
STM32F767XX |
CONFIG_SOC_STM32F769XX
|
STM32F769XX |
CONFIG_SOC_STM32G030XX
|
STM32G030XX |
CONFIG_SOC_STM32G031XX
|
STM32G031XX |
CONFIG_SOC_STM32G041XX
|
STM32G041XX |
CONFIG_SOC_STM32G050XX
|
STM32G050XX |
CONFIG_SOC_STM32G051XX
|
STM32G051XX |
CONFIG_SOC_STM32G061XX
|
STM32G061XX |
CONFIG_SOC_STM32G070XX
|
STM32G070XX |
CONFIG_SOC_STM32G071XX
|
STM32G071XX |
CONFIG_SOC_STM32G081XX
|
STM32G081XX |
CONFIG_SOC_STM32G0B0XX
|
STM32G0B0XX |
CONFIG_SOC_STM32G0B1XX
|
STM32G0B1XX |
CONFIG_SOC_STM32G0C1XX
|
STM32G0C1XX |
CONFIG_SOC_STM32G431XX
|
STM32G431XX |
CONFIG_SOC_STM32G441XX
|
STM32G441XX |
CONFIG_SOC_STM32G473XX
|
STM32G473XX |
CONFIG_SOC_STM32G474XX
|
STM32G474XX |
CONFIG_SOC_STM32G483XX
|
STM32G483XX |
CONFIG_SOC_STM32G484XX
|
STM32G484XX |
CONFIG_SOC_STM32G491XX
|
STM32G491XX |
CONFIG_SOC_STM32G4A1XX
|
STM32G4A1XX |
CONFIG_SOC_STM32H723XX
|
STM32H723XX |
CONFIG_SOC_STM32H735XX
|
STM32H735XX |
CONFIG_SOC_STM32H743XX
|
STM32H743XX |
CONFIG_SOC_STM32H745XX
|
STM32H745XX |
CONFIG_SOC_STM32H747XX
|
STM32H747XX |
CONFIG_SOC_STM32H750XX
|
STM32H750XX |
CONFIG_SOC_STM32H753XX
|
STM32H753XX |
CONFIG_SOC_STM32L011XX
|
STM32L011XX |
CONFIG_SOC_STM32L031XX
|
STM32L031XX |
CONFIG_SOC_STM32L051XX
|
STM32L051XX |
CONFIG_SOC_STM32L053XX
|
STM32L053XX |
CONFIG_SOC_STM32L071XX
|
STM32L071XX |
CONFIG_SOC_STM32L072XX
|
STM32L072XX |
CONFIG_SOC_STM32L073XX
|
STM32L073XX |
CONFIG_SOC_STM32L151X8A
|
STM32L151X8A |
CONFIG_SOC_STM32L151XB
|
STM32L151XB |
CONFIG_SOC_STM32L151XBA
|
STM32L151XBA |
CONFIG_SOC_STM32L151XC
|
STM32L151XC |
CONFIG_SOC_STM32L152XC
|
STM32L152XC |
CONFIG_SOC_STM32L152XE
|
STM32L152XE |
CONFIG_SOC_STM32L412XX
|
STM32L412XX |
CONFIG_SOC_STM32L422XX
|
STM32L422XX |
CONFIG_SOC_STM32L432XX
|
STM32L432XX |
CONFIG_SOC_STM32L433XX
|
STM32L433XX |
CONFIG_SOC_STM32L452XX
|
STM32L452XX |
CONFIG_SOC_STM32L462XX
|
STM32L462XX |
CONFIG_SOC_STM32L471XX
|
STM32L471XX |
CONFIG_SOC_STM32L475XX
|
STM32L475XX |
CONFIG_SOC_STM32L476XX
|
STM32L476X |
CONFIG_SOC_STM32L496XX
|
STM32L496XX |
CONFIG_SOC_STM32L4R5XX
|
STM32L4R5XX |
CONFIG_SOC_STM32L4R9XX
|
STM32L4R9XX |
CONFIG_SOC_STM32L4S5XX
|
STM32L4S5XX |
CONFIG_SOC_STM32L552XX
|
STM32L552XX |
CONFIG_SOC_STM32L562XX
|
STM32L562XX |
CONFIG_SOC_STM32MP15_M4
|
STM32MP15_M4 |
CONFIG_SOC_STM32WB55XX
|
STM32WB55XX |
CONFIG_SOC_STM32WL54XX
|
STM32WL54XX |
CONFIG_SOC_STM32WL55XX
|
STM32WL55XX |
CONFIG_SOC_STM32WLE4XX
|
STM32WLE4XX |
CONFIG_SOC_STM32WLE5XX
|
STM32WLE5XX |
CONFIG_SOC_TI_LM3S6965
|
TI LM3S6965 |
CONFIG_SOC_TI_LM3S6965_QEMU
|
|
CONFIG_SOC_TOOLCHAIN_NAME
|
|
CONFIG_SOC_V2M_MUSCA_B1
|
ARM Cortex-M33 SMM-SSE-200 on V2M-MUSCA-B1 |
CONFIG_SOC_V2M_MUSCA_S1
|
ARM Cortex-M33 SMM-SSE-200 on V2M-MUSCA-S1 |
CONFIG_SOC_XENVM
|
Xen virtual machine on aarch64 |
CONFIG_SOC_XILINX_ZYNQMP
|
|
CONFIG_SOC_XILINX_ZYNQMP_RPU
|
Xilinx ZynqMP RPU |
CONFIG_SOC_XMC4500
|
SOC_XMC4500 |
CONFIG_SOC_XTENSA_SAMPLE_CONTROLLER
|
Xtensa sample_controller core |
CONFIG_SOF
|
Sound Open Firmware (SOF) |
CONFIG_SPARC
|
|
CONFIG_SPARC_CASA
|
CASA instructions |
CONFIG_SPARC_NWIN
|
Number of register windows |
CONFIG_SPEED_OPTIMIZATIONS
|
Optimize for speed |
CONFIG_SPI
|
SPI hardware bus support |
CONFIG_SPIN_VALIDATE
|
Enable spinlock validation |
CONFIG_SPIRAM
|
|
CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN
|
Use custom SPI PSRAM WP(SD3) Pin when flash pins set in eFuse (read help) |
CONFIG_SPIRAM_SPEED_40M
|
40MHz clock speed |
CONFIG_SPIRAM_SPEED_80M
|
80MHz clock speed |
CONFIG_SPIRAM_SPIWP_SD3_PIN
|
Custom SPI PSRAM WP(SD3) Pin |
CONFIG_SPIRAM_TYPE_ESPPSRAM16
|
ESP-PSRAM16 or APS1604 |
CONFIG_SPIRAM_TYPE_ESPPSRAM32
|
ESP-PSRAM32 or IS25WP032 |
CONFIG_SPIRAM_TYPE_ESPPSRAM64
|
ESP-PSRAM64 or LY68L6400 |
CONFIG_SPI_0_NRF_ORC
|
SPI Port 0 over-read character |
CONFIG_SPI_0_NRF_SPI
|
|
CONFIG_SPI_0_NRF_SPIM
|
|
CONFIG_SPI_0_NRF_SPIS
|
|
CONFIG_SPI_1_NRF_ORC
|
SPI Port 1 over-read character |
CONFIG_SPI_1_NRF_SPI
|
|
CONFIG_SPI_1_NRF_SPIM
|
|
CONFIG_SPI_1_NRF_SPIS
|
|
CONFIG_SPI_2_NRF_ORC
|
SPI Port 2 over-read character |
CONFIG_SPI_2_NRF_SPI
|
|
CONFIG_SPI_2_NRF_SPIM
|
|
CONFIG_SPI_2_NRF_SPIS
|
|
CONFIG_SPI_3_NRF_ORC
|
SPI Port 3 over-read character |
CONFIG_SPI_3_NRF_RX_DELAY
|
SPIM3 MISO sampling delay |
CONFIG_SPI_3_NRF_SPIM
|
|
CONFIG_SPI_3_NRF_SPIS
|
|
CONFIG_SPI_4_NRF_ORC
|
SPI Port 4 over-read character |
CONFIG_SPI_4_NRF_RX_DELAY
|
SPIM4 MISO sampling delay |
CONFIG_SPI_4_NRF_SPIM
|
|
CONFIG_SPI_ASYNC
|
Enable Asynchronous call support |
CONFIG_SPI_CC13XX_CC26XX
|
TI SimpleLink CC13xx / CC26xx SPI driver |
CONFIG_SPI_COMPLETION_TIMEOUT_TOLERANCE
|
Completion timeout tolerance (ms) |
CONFIG_SPI_DW
|
Designware SPI controller driver |
CONFIG_SPI_DW_ACCESS_WORD_ONLY
|
DesignWare SPI only allows word access |
CONFIG_SPI_DW_ARC_AUX_REGS
|
Registers are part of ARC auxiliary registers |
CONFIG_SPI_DW_FIFO_DEPTH
|
RX and TX FIFO Depth |
CONFIG_SPI_EMUL
|
SPI emulator |
CONFIG_SPI_ESP32_INTERRUPT
|
ESP32 SPI interrupt mode |
CONFIG_SPI_FLASH_AT45
|
AT45 family flash driver |
CONFIG_SPI_FLASH_AT45_INIT_PRIORITY
|
Driver initialization priority |
CONFIG_SPI_FLASH_AT45_USE_READ_MODIFY_WRITE
|
Use Read-Modify-Write command in flash_write() |
CONFIG_SPI_GECKO
|
Gecko SPI controller driver |
CONFIG_SPI_INIT_PRIORITY
|
Init priority |
CONFIG_SPI_LITESPI
|
LiteX SPI controller driver |
CONFIG_SPI_LOG_LEVEL
|
|
CONFIG_SPI_LOG_LEVEL_DBG
|
Debug |
CONFIG_SPI_LOG_LEVEL_ERR
|
Error |
CONFIG_SPI_LOG_LEVEL_INF
|
Info |
CONFIG_SPI_LOG_LEVEL_OFF
|
Off |
CONFIG_SPI_LOG_LEVEL_WRN
|
Warning |
CONFIG_SPI_MCUX_DSPI
|
MCUX SPI driver |
CONFIG_SPI_MCUX_FLEXCOMM
|
MCUX FLEXCOMM SPI driver |
CONFIG_SPI_MCUX_FLEXCOMM_DMA
|
MCUX FLEXCOMM SPI DMA Support |
CONFIG_SPI_MCUX_LPSPI
|
MCUX SPI driver |
CONFIG_SPI_NOR
|
SPI NOR Flash |
CONFIG_SPI_NOR_CS_WAIT_DELAY
|
Delay time in us |
CONFIG_SPI_NOR_FLASH_LAYOUT_PAGE_SIZE
|
Page size to use for FLASH_LAYOUT feature |
CONFIG_SPI_NOR_IDLE_IN_DPD
|
Use Deep Power-Down mode when flash is not being accessed. |
CONFIG_SPI_NOR_INIT_PRIORITY
|
|
CONFIG_SPI_NOR_SFDP_DEVICETREE
|
Basic Flash Parameters from devicetree node |
CONFIG_SPI_NOR_SFDP_MINIMAL
|
Fixed flash configuration |
CONFIG_SPI_NOR_SFDP_RUNTIME
|
Read flash parameters at runtime |
CONFIG_SPI_NRFX
|
nRF SPI nrfx drivers |
CONFIG_SPI_NRFX_RAM_BUFFER_SIZE
|
Size of RAM buffers for SPIM peripherals |
CONFIG_SPI_OC_SIMPLE
|
OpenCores Simple SPI controller driver |
CONFIG_SPI_OC_SIMPLE_BUS_WIDTH
|
|
CONFIG_SPI_PSOC6
|
PSoC-6 MCU SCB spi driver |
CONFIG_SPI_RV32M1_LPSPI
|
RV32M1 LPSPI driver |
CONFIG_SPI_SAM
|
Atmel SAM series SPI driver |
CONFIG_SPI_SAM0
|
Atmel SAM0 series SERCOM SPI driver |
CONFIG_SPI_SIFIVE
|
SiFive SPI controller driver |
CONFIG_SPI_SLAVE
|
Enable Slave support [EXPERIMENTAL] |
CONFIG_SPI_STM32
|
STM32 MCU SPI controller driver |
CONFIG_SPI_STM32_DMA
|
STM32 MCU SPI DMA Support |
CONFIG_SPI_STM32_INTERRUPT
|
STM32 MCU SPI Interrupt Support |
CONFIG_SPI_STM32_USE_HW_SS
|
STM32 Hardware Slave Select support |
CONFIG_SPI_TEST
|
|
CONFIG_SPI_XEC_QMSPI
|
Microchip XEC QMSPI driver |
CONFIG_SPI_XLNX_AXI_QUADSPI
|
Xilinx AXI Quad SPI driver |
CONFIG_SRAM_BASE_ADDRESS
|
SRAM Base Address |
CONFIG_SRAM_OFFSET
|
Kernel SRAM offset |
CONFIG_SRAM_REGION_PERMISSIONS
|
Assign appropriate permissions to kernel areas in SRAM |
CONFIG_SRAM_SIZE
|
SRAM Size in kB |
CONFIG_SRAM_VECTOR_TABLE
|
Place the vector table in SRAM instead of flash |
CONFIG_SSD1306
|
SSD1306 display driver |
CONFIG_SSD1306_DEFAULT
|
Default SSD1306 controller |
CONFIG_SSD1306_DEFAULT_CONTRAST
|
SSD1306 default contrast |
CONFIG_SSD1306_REVERSE_MODE
|
SSD1306 reverse mode |
CONFIG_SSD1306_SH1106_COMPATIBLE
|
Enable SH1106 compatible mode |
CONFIG_SSD16XX
|
SSD16XX compatible display controller driver |
CONFIG_SSE
|
SSE registers |
CONFIG_SSE_FP_MATH
|
Compiler-generated SSEx instructions |
CONFIG_ST25R3911B_LIB_LOG_LEVEL
|
|
CONFIG_ST25R3911B_LIB_LOG_LEVEL_DBG
|
Debug |
CONFIG_ST25R3911B_LIB_LOG_LEVEL_ERR
|
Error |
CONFIG_ST25R3911B_LIB_LOG_LEVEL_INF
|
Info |
CONFIG_ST25R3911B_LIB_LOG_LEVEL_OFF
|
Off |
CONFIG_ST25R3911B_LIB_LOG_LEVEL_WRN
|
Warning |
CONFIG_ST7735R
|
ST7735R display driver |
CONFIG_ST7789V
|
ST7789V display driver |
CONFIG_ST7789V_RGB565
|
RGB565 |
CONFIG_ST7789V_RGB888
|
RGB888 |
CONFIG_STACK_ALIGN_DOUBLE_WORD
|
Align stacks on double-words (8 octets) |
CONFIG_STACK_CANARIES
|
Compiler stack canaries |
CONFIG_STACK_GROWS_UP
|
Stack grows towards higher memory addresses |
CONFIG_STACK_POINTER_RANDOM
|
Initial stack pointer randomization bounds |
CONFIG_STACK_SENTINEL
|
Enable stack sentinel |
CONFIG_STACK_USAGE
|
Generate stack usage information |
CONFIG_STATS
|
Statistics support |
CONFIG_STATS_NAMES
|
Statistic names |
CONFIG_STAT_MGMT_MAX_NAME_LEN
|
Maximum stat group name length |
CONFIG_STDOUT_CONSOLE
|
Send stdout to console |
CONFIG_STD_CPP11
|
C++ 11 |
CONFIG_STD_CPP14
|
C++ 14 |
CONFIG_STD_CPP17
|
C++ 17 |
CONFIG_STD_CPP20
|
C++ 20 |
CONFIG_STD_CPP2A
|
C++ 2a |
CONFIG_STD_CPP2B
|
C++ 2b |
CONFIG_STD_CPP98
|
C++ 98 |
CONFIG_STM32H7_DUAL_CORE
|
Enable Dual Core |
CONFIG_STM32_BACKUP_SRAM
|
Enable STM32 Backup SRAM |
CONFIG_STM32_CCM
|
|
CONFIG_STM32_LPTIM_CLOCK
|
LPTIM clock value |
CONFIG_STM32_LPTIM_CLOCK_LSE
|
LSE |
CONFIG_STM32_LPTIM_CLOCK_LSI
|
LSI |
CONFIG_STM32_LPTIM_TIMEBASE
|
LPTIM AutoReload value |
CONFIG_STM32_LPTIM_TIMER
|
STM32 Low Power Timer [EXPERIMENTAL] |
CONFIG_STM32_TEMP
|
STM32 Temperature Sensor |
CONFIG_STREAM_FLASH
|
Stream to flash |
CONFIG_STREAM_FLASH_ERASE
|
Perform erase operations |
CONFIG_STREAM_FLASH_LOG_LEVEL
|
|
CONFIG_STREAM_FLASH_LOG_LEVEL_DBG
|
Debug |
CONFIG_STREAM_FLASH_LOG_LEVEL_ERR
|
Error |
CONFIG_STREAM_FLASH_LOG_LEVEL_INF
|
Info |
CONFIG_STREAM_FLASH_LOG_LEVEL_OFF
|
Off |
CONFIG_STREAM_FLASH_LOG_LEVEL_WRN
|
Warning |
CONFIG_STREAM_FLASH_PROGRESS
|
Persistent stream write progress |
CONFIG_STTS751
|
STTS751 temperature sensor |
CONFIG_STTS751_SAMPLING_RATE
|
Output data rate |
CONFIG_STTS751_TEMP_HI_THRESHOLD
|
High temperature threshold alarm |
CONFIG_STTS751_TEMP_LO_THRESHOLD
|
Low temperature threshold alarm |
CONFIG_STTS751_THREAD_PRIORITY
|
Thread priority |
CONFIG_STTS751_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_STTS751_TRIGGER
|
|
CONFIG_STTS751_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_STTS751_TRIGGER_NONE
|
No trigger |
CONFIG_STTS751_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_SWAP_NONATOMIC
|
|
CONFIG_SWERV_PIC
|
SweRV EH1 Programmable Interrupt Controller (PIC) |
CONFIG_SW_VECTOR_RELAY
|
Enable Software Vector Relay |
CONFIG_SW_VECTOR_RELAY_CLIENT
|
Enable Software Vector Relay (client) |
CONFIG_SX9500
|
SX9500 I2C SAR Proximity Chip |
CONFIG_SX9500_PROX_CHANNEL
|
Proximity channel to use |
CONFIG_SX9500_THREAD_PRIORITY
|
Thread priority |
CONFIG_SX9500_THREAD_STACK_SIZE
|
Sensor delayed work thread stack size |
CONFIG_SX9500_TRIGGER
|
|
CONFIG_SX9500_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_SX9500_TRIGGER_NONE
|
No trigger |
CONFIG_SX9500_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_SYSCALL_TRACING
|
Enable tracing Syscalls |
CONFIG_SYSCON
|
SYSCON (System Controller) drivers |
CONFIG_SYSCON_GENERIC
|
Generic SYSCON (System Controller) driver |
CONFIG_SYSCON_GENERIC_INIT_PRIORITY_DEVICE
|
SYSCON (System Controller) generic init device priority |
CONFIG_SYSCON_LOG_LEVEL
|
|
CONFIG_SYSCON_LOG_LEVEL_DBG
|
Debug |
CONFIG_SYSCON_LOG_LEVEL_ERR
|
Error |
CONFIG_SYSCON_LOG_LEVEL_INF
|
Info |
CONFIG_SYSCON_LOG_LEVEL_OFF
|
Off |
CONFIG_SYSCON_LOG_LEVEL_WRN
|
Warning |
CONFIG_SYSOSC_SETTLING_US
|
System oscillator settling time |
CONFIG_SYSTEM_CLOCK_DISABLE
|
API to disable system clock |
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY
|
System clock driver initialization priority |
CONFIG_SYSTEM_CLOCK_NO_WAIT
|
No wait |
CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE
|
Timer allowed to skew uptime clock during idle |
CONFIG_SYSTEM_CLOCK_WAIT_FOR_AVAILABILITY
|
Wait for availability |
CONFIG_SYSTEM_CLOCK_WAIT_FOR_STABILITY
|
Wait for stability |
CONFIG_SYSTEM_WORKQUEUE_NO_YIELD
|
Select whether system work queue yields |
CONFIG_SYSTEM_WORKQUEUE_PRIORITY
|
System workqueue priority |
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE
|
System workqueue stack size |
CONFIG_SYS_CLOCK_EXISTS
|
System clock exists and is enabled |
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC
|
Hardware clock cycles per second, 2000000 for ISS |
CONFIG_SYS_CLOCK_TICKS_PER_SEC
|
System tick frequency (in ticks/second) |
CONFIG_SYS_HEAP_ALLOC_LOOPS
|
Number of tries in the inner heap allocation loop |
CONFIG_SYS_HEAP_VALIDATE
|
Enable internal heap validity checking |
CONFIG_SYS_POWER_MANAGEMENT
|
System Power management |
CONFIG_TACH_NPCX
|
Nuvoton NPCX Tachometer sensor |
CONFIG_TACH_XEC
|
XEC Tachometer sensor |
CONFIG_TACH_XEC_2_TACH_EDGES
|
Configure 2 tach edges or 1/2 tach period |
CONFIG_TACH_XEC_3_TACH_EDGES
|
Configure 3 tach edges or 1 tach period |
CONFIG_TACH_XEC_5_TACH_EDGES
|
Configure 5 tach edges or 2 tach periods |
CONFIG_TACH_XEC_9_TACH_EDGES
|
Configure 9 tach edges or 4 tach periods |
CONFIG_TACH_XEC_EDGES
|
|
CONFIG_TASK_WDT
|
Task-level software watchdog |
CONFIG_TASK_WDT_CHANNELS
|
Maximum number of task watchdog channels |
CONFIG_TASK_WDT_HW_FALLBACK
|
Use hardware watchdog as a fallback |
CONFIG_TASK_WDT_HW_FALLBACK_DELAY
|
Additional delay for hardware watchdog (ms) |
CONFIG_TASK_WDT_MIN_TIMEOUT
|
Minimum timeout for task watchdog (ms) |
CONFIG_TELINK_B91_HWDSP
|
Support Hardware DSP |
CONFIG_TELINK_B91_PFT_ARCH
|
Support performance throttling |
CONFIG_TEMP_KINETIS
|
NXP Kinetis Temperature Sensor |
CONFIG_TEMP_KINETIS_FILTER
|
Enable digital filtering of ADC readings |
CONFIG_TEMP_KINETIS_OVERSAMPLING
|
ADC oversampling |
CONFIG_TEMP_KINETIS_RESOLUTION
|
ADC resolution |
CONFIG_TEMP_NRF5
|
nRF5 Temperature Sensor |
CONFIG_TEMP_NRF5_FORCE_ALT
|
|
CONFIG_TENSORFLOW_LITE_MICRO
|
TensorFlow Lite Micro Support |
CONFIG_TEST
|
Mark project as a test |
CONFIG_TEST_ARM_CORTEX_M
|
|
CONFIG_TEST_ENABLE_USERSPACE
|
|
CONFIG_TEST_EXTRA_STACKSIZE
|
Test function extra thread stack size |
CONFIG_TEST_FLASH_DRIVERS
|
Test flash drivers |
CONFIG_TEST_HW_STACK_PROTECTION
|
Enable hardware-based stack overflow detection if available |
CONFIG_TEST_LOGGING_DEFAULTS
|
Enable test case logging defaults |
CONFIG_TEST_RANDOM_GENERATOR
|
Non-random number generator |
CONFIG_TEST_USERSPACE
|
Indicate that this test exercises user mode |
CONFIG_TEST_USERSPACE_WITHOUT_HW_STACK_PROTECTION
|
Run User Mode tests without additionally enabling stack protection |
CONFIG_TFM_BL2
|
Add MCUboot to TFM |
CONFIG_TFM_BOARD
|
|
CONFIG_TFM_CMAKE_BUILD_TYPE_DEBUG
|
Debug build |
CONFIG_TFM_CMAKE_BUILD_TYPE_MINSIZEREL
|
Release build, optimized for size |
CONFIG_TFM_CMAKE_BUILD_TYPE_RELEASE
|
Release build |
CONFIG_TFM_CMAKE_BUILD_TYPE_RELWITHDEBINFO
|
Release build with Debug info |
CONFIG_TFM_CRYPTO_AEAD_MODULE_ENABLED
|
Enable AEAD crypto module |
CONFIG_TFM_CRYPTO_ASYMMETRIC_MODULE_ENABLED
|
Enable ASYMMETRIC crypto module |
CONFIG_TFM_CRYPTO_CIPHER_MODULE_ENABLED
|
Enable CIPHER crypto module |
CONFIG_TFM_CRYPTO_GENERATOR_MODULE_ENABLED
|
Enable GENERATOR crypto module |
CONFIG_TFM_CRYPTO_HASH_MODULE_ENABLED
|
Enable HASH crypto module |
CONFIG_TFM_CRYPTO_KEY_DERIVATION_MODULE_ENABLED
|
Enable KEY DERIVATION crypto module |
CONFIG_TFM_CRYPTO_KEY_MODULE_ENABLED
|
Enable KEY crypto module |
CONFIG_TFM_CRYPTO_MAC_MODULE_ENABLED
|
Enable MAC crypto module |
CONFIG_TFM_CRYPTO_RNG_MODULE_ENABLED
|
Enable random number generator crypto module |
CONFIG_TFM_FLASH_MERGED_BINARY
|
|
CONFIG_TFM_IPC
|
IPC |
CONFIG_TFM_ISOLATION_LEVEL
|
Isolation level setting. |
CONFIG_TFM_KEY_FILE_NS
|
Path to private key used to sign non-secure firmware images. |
CONFIG_TFM_KEY_FILE_S
|
Path to private key used to sign secure firmware images. |
CONFIG_TFM_MCUBOOT_IMAGE_NUMBER
|
Granularity of FW updates of TFM and app |
CONFIG_TFM_PARTITION_AUDIT_LOG
|
Enable secure partition ‘Audit Log’ |
CONFIG_TFM_PARTITION_CRYPTO
|
Enable secure partition ‘Crypto’ |
CONFIG_TFM_PARTITION_INITIAL_ATTESTATION
|
Enable secure partition ‘Initial Attestation’ |
CONFIG_TFM_PARTITION_INTERNAL_TRUSTED_STORAGE
|
Enable secure partition ‘Internal Trusted Storage’ |
CONFIG_TFM_PARTITION_PLATFORM
|
Enable secure partition ‘Platform’ |
CONFIG_TFM_PARTITION_PROTECTED_STORAGE
|
Enable secure partition ‘Protected Storage’ |
CONFIG_TFM_PROFILE
|
|
CONFIG_TFM_PROFILE_TYPE_LARGE
|
TF-M build profile: large |
CONFIG_TFM_PROFILE_TYPE_MEDIUM
|
TF-M build profile: medium |
CONFIG_TFM_PROFILE_TYPE_NOT_SET
|
TF-M build profile is not set |
CONFIG_TFM_PROFILE_TYPE_SMALL
|
TF-M build profile: small |
CONFIG_TFM_PSA_TEST_CRYPTO
|
Crypto tests |
CONFIG_TFM_PSA_TEST_INITIAL_ATTESTATION
|
Initial attestation tests |
CONFIG_TFM_PSA_TEST_INTERNAL_TRUSTED_STORAGE
|
Internal Trusted Storage tests |
CONFIG_TFM_PSA_TEST_NONE
|
No PSA test suite |
CONFIG_TFM_PSA_TEST_PROTECTED_STORAGE
|
Storage tests |
CONFIG_TFM_PSA_TEST_STORAGE
|
Storage tests |
CONFIG_TFM_REGRESSION_NS
|
Use the TF-M Non-Secure Regression test application |
CONFIG_TFM_REGRESSION_S
|
TF-M Secure Regression tests |
CONFIG_TFTPC_REQUEST_RETRANSMITS
|
Number of times the TFTP Client will retransmit the request to the server. |
CONFIG_TFTPC_REQUEST_TIMEOUT
|
Maximum amount of time the TFTP Client will wait for a response from the server. |
CONFIG_TFTP_LIB
|
Socket TFTP Library Support [EXPERIMENTAL] |
CONFIG_TFTP_LOG_LEVEL
|
|
CONFIG_TFTP_LOG_LEVEL_DBG
|
Debug |
CONFIG_TFTP_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_TFTP_LOG_LEVEL_ERR
|
Error |
CONFIG_TFTP_LOG_LEVEL_INF
|
Info |
CONFIG_TFTP_LOG_LEVEL_OFF
|
Off |
CONFIG_TFTP_LOG_LEVEL_WRN
|
Warning |
CONFIG_TH02
|
TH02 Temperature Sensor |
CONFIG_THINGY53_INIT_PRIORITY
|
Init priority |
CONFIG_THINGY53_MISO_WORKAROUND
|
MISO workaround |
CONFIG_THREAD_ANALYZER
|
Enable Thread analyzer |
CONFIG_THREAD_ANALYZER_AUTO
|
Run periodic thread analysis in a thread |
CONFIG_THREAD_ANALYZER_AUTO_INTERVAL
|
Thread analysis interval |
CONFIG_THREAD_ANALYZER_AUTO_STACK_SIZE
|
Stack size for the periodic thread analysis thread |
CONFIG_THREAD_ANALYZER_LOG_LEVEL
|
|
CONFIG_THREAD_ANALYZER_LOG_LEVEL_DBG
|
Debug |
CONFIG_THREAD_ANALYZER_LOG_LEVEL_ERR
|
Error |
CONFIG_THREAD_ANALYZER_LOG_LEVEL_INF
|
Info |
CONFIG_THREAD_ANALYZER_LOG_LEVEL_OFF
|
Off |
CONFIG_THREAD_ANALYZER_LOG_LEVEL_WRN
|
Warning |
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED
|
Run analysis with interrupts unlocked |
CONFIG_THREAD_ANALYZER_USE_LOG
|
Use logger output |
CONFIG_THREAD_ANALYZER_USE_PRINTK
|
Use printk function |
CONFIG_THREAD_CUSTOM_DATA
|
Thread custom data |
CONFIG_THREAD_LOCAL_STORAGE
|
Thread Local Storage (TLS) |
CONFIG_THREAD_MAX_NAME_LEN
|
Max length of a thread name |
CONFIG_THREAD_MONITOR
|
Thread monitoring |
CONFIG_THREAD_NAME
|
Thread name |
CONFIG_THREAD_RUNTIME_STATS
|
Thread runtime statistics |
CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS
|
Use timing functions to gather statistics |
CONFIG_THREAD_STACK_INFO
|
Thread stack info |
CONFIG_THREAD_USERSPACE_LOCAL_DATA
|
|
CONFIG_TICKLESS_CAPABLE
|
|
CONFIG_TICKLESS_KERNEL
|
Tickless kernel |
CONFIG_TIMEOUT_64BIT
|
Store kernel timeouts in 64 bit precision |
CONFIG_TIMER_DTMR_CMSDK_APB
|
ARM CMSDK (Cortex-M System Design Kit) DTMR Timer driver |
CONFIG_TIMER_RANDOM_GENERATOR
|
System timer clock based number generator |
CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME
|
Timer queries its hardware to find its frequency at runtime |
CONFIG_TIMER_TMR_CMSDK_APB
|
ARM CMSDK (Cortex-M System Design Kit) Timer driver |
CONFIG_TIMESLICE_PRIORITY
|
Time slicing thread priority ceiling |
CONFIG_TIMESLICE_SIZE
|
Time slice size (in ms) |
CONFIG_TIMESLICING
|
Thread time slicing |
CONFIG_TIMING_FUNCTIONS
|
Timing Functions |
CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT
|
|
CONFIG_TINYCBOR
|
tinyCBOR Support |
CONFIG_TINYCRYPT
|
TinyCrypt Support |
CONFIG_TINYCRYPT_AES
|
AES-128 decrypt/encrypt |
CONFIG_TINYCRYPT_AES_CBC
|
AES-128 block cipher |
CONFIG_TINYCRYPT_AES_CCM
|
AES-128 CCM mode |
CONFIG_TINYCRYPT_AES_CMAC
|
AES-128 CMAC mode |
CONFIG_TINYCRYPT_AES_CTR
|
AES-128 counter mode |
CONFIG_TINYCRYPT_CTR_PRNG
|
PRNG in counter mode |
CONFIG_TINYCRYPT_ECC_DH
|
ECC_DH anonymous key agreement protocol |
CONFIG_TINYCRYPT_ECC_DSA
|
ECC_DSA digital signature algorithm |
CONFIG_TINYCRYPT_SHA256
|
SHA-256 Hash function support |
CONFIG_TINYCRYPT_SHA256_HMAC
|
HMAC (via SHA256) message auth support |
CONFIG_TINYCRYPT_SHA256_HMAC_PRNG
|
PRNG (via HMAC-SHA256) support |
CONFIG_TI_HDC
|
Texas Instruments Temperature and Humidity Sensor (e.g. HDC1008) |
CONFIG_TI_HDC20XX
|
Texas Instruments HDC20XX Temperature and Humidity Sensor |
CONFIG_TLB_IPI_VECTOR
|
IDT vector to use for TLB shootdown IPI |
CONFIG_TLS_CREDENTIALS
|
TLS credentials management |
CONFIG_TLS_CREDENTIAL_FILENAMES
|
Specify TLS credential filenames |
CONFIG_TLS_MAX_CREDENTIALS_NUMBER
|
Maximum number of TLS credentials |
CONFIG_TMP007
|
TMP007 Infrared Thermopile Sensor |
CONFIG_TMP007_THREAD_PRIORITY
|
Thread priority |
CONFIG_TMP007_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_TMP007_TRIGGER
|
|
CONFIG_TMP007_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_TMP007_TRIGGER_NONE
|
No trigger |
CONFIG_TMP007_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_TMP112
|
TMP112 Temperature Sensor |
CONFIG_TMP116
|
TMP116 and TMP117 Temperature Sensors |
CONFIG_TOOLCHAIN_HAS_BUILTIN_FFS
|
|
CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE
|
|
CONFIG_TRACE_SCHED_IPI
|
Enable Test IPI |
CONFIG_TRACING
|
Tracing Support |
CONFIG_TRACING_ASYNC
|
Asynchronous Tracing |
CONFIG_TRACING_BACKEND_POSIX
|
Enable posix architecture (native) backend |
CONFIG_TRACING_BACKEND_RAM
|
Enable RAM backend |
CONFIG_TRACING_BACKEND_UART
|
Enable UART backend |
CONFIG_TRACING_BACKEND_UART_NAME
|
Device Name of UART Device for UART backend |
CONFIG_TRACING_BACKEND_USB
|
Enable USB backend |
CONFIG_TRACING_BUFFER_SIZE
|
Size of tracing buffer |
CONFIG_TRACING_CMD_BUFFER_SIZE
|
Size of tracing command buffer |
CONFIG_TRACING_CONDVAR
|
Enable tracing Condition Variables |
CONFIG_TRACING_CORE
|
|
CONFIG_TRACING_CTF
|
Tracing via Common Trace Format support |
CONFIG_TRACING_CTF_TIMESTAMP
|
Enable CTF internal timestamp |
CONFIG_TRACING_FIFO
|
Enable tracing FIFO queues |
CONFIG_TRACING_HANDLE_HOST_CMD
|
Enable host command handle |
CONFIG_TRACING_HEAP
|
Enable tracing Memory Heaps |
CONFIG_TRACING_ISR
|
Enable tracing ISRs |
CONFIG_TRACING_LIFO
|
Enable tracing LIFO queues |
CONFIG_TRACING_MAILBOX
|
Enable tracing Mailboxes |
CONFIG_TRACING_MEMORY_SLAB
|
Enable tracing Memory Slabs |
CONFIG_TRACING_MESSAGE_QUEUE
|
Enable tracing Message Queues |
CONFIG_TRACING_MUTEX
|
Enable tracing Mutexes |
CONFIG_TRACING_NONE
|
No tracing format selected |
CONFIG_TRACING_PACKET_MAX_SIZE
|
Max size of one tracing packet |
CONFIG_TRACING_PIPE
|
Enable tracing Pipes |
CONFIG_TRACING_QUEUE
|
Enable tracing Queues |
CONFIG_TRACING_SEMAPHORE
|
Enable tracing Semaphores |
CONFIG_TRACING_STACK
|
Enable tracing Memory Stacks |
CONFIG_TRACING_SYNC
|
Synchronous Tracing |
CONFIG_TRACING_TEST
|
Tracing for test usage |
CONFIG_TRACING_THREAD
|
Enable tracing Threads |
CONFIG_TRACING_THREAD_STACK_SIZE
|
Stack size of tracing thread |
CONFIG_TRACING_THREAD_WAIT_THRESHOLD
|
Tracing thread waiting threshold |
CONFIG_TRACING_TIMER
|
Enable tracing Timers |
CONFIG_TRACING_USB_MPS
|
USB backend max packet size |
CONFIG_TRACING_WORK
|
Enable tracing Work |
CONFIG_TRUSTED_EXECUTION_NONSECURE
|
Trusted Execution: Non-Secure firmware image |
CONFIG_TRUSTED_EXECUTION_SECURE
|
Trusted Execution: Secure firmware image |
CONFIG_UARTE_NRF_HW_ASYNC
|
|
CONFIG_UART_0_ASYNC
|
Enable Asynchronous API support on port 0 |
CONFIG_UART_0_ENHANCED_POLL_OUT
|
Efficient poll out on port 0 |
CONFIG_UART_0_GPIO_MANAGEMENT
|
Enable GPIO management on port 0 |
CONFIG_UART_0_INTERRUPT_DRIVEN
|
Enable interrupt support on port 0 |
CONFIG_UART_0_NRF_ASYNC_LOW_POWER
|
Low power mode |
CONFIG_UART_0_NRF_HW_ASYNC
|
Use hardware RX byte counting |
CONFIG_UART_0_NRF_HW_ASYNC_TIMER
|
Timer instance |
CONFIG_UART_0_NRF_PARITY_BIT
|
Enable parity bit |
CONFIG_UART_0_NRF_TX_BUFFER_SIZE
|
Size of RAM buffer |
CONFIG_UART_0_NRF_UART
|
|
CONFIG_UART_0_NRF_UARTE
|
|
CONFIG_UART_1_ASYNC
|
Enable Asynchronous API support on port 1 |
CONFIG_UART_1_ENHANCED_POLL_OUT
|
Efficient poll out on port 1 |
CONFIG_UART_1_GPIO_MANAGEMENT
|
Enable GPIO management on port 1 |
CONFIG_UART_1_INTERRUPT_DRIVEN
|
Enable interrupt support on port 1 |
CONFIG_UART_1_NRF_ASYNC_LOW_POWER
|
Low power mode |
CONFIG_UART_1_NRF_HW_ASYNC
|
Use hardware RX byte counting |
CONFIG_UART_1_NRF_HW_ASYNC_TIMER
|
Timer instance |
CONFIG_UART_1_NRF_PARITY_BIT
|
Enable parity bit |
CONFIG_UART_1_NRF_TX_BUFFER_SIZE
|
Size of RAM buffer |
CONFIG_UART_1_NRF_UARTE
|
|
CONFIG_UART_2_ASYNC
|
Enable Asynchronous API support on port 2 |
CONFIG_UART_2_ENHANCED_POLL_OUT
|
Efficient poll out on port 2 |
CONFIG_UART_2_GPIO_MANAGEMENT
|
Enable GPIO management on port 2 |
CONFIG_UART_2_INTERRUPT_DRIVEN
|
Enable interrupt support on port 2 |
CONFIG_UART_2_NRF_ASYNC_LOW_POWER
|
Low power mode |
CONFIG_UART_2_NRF_HW_ASYNC
|
Use hardware RX byte counting |
CONFIG_UART_2_NRF_HW_ASYNC_TIMER
|
Timer instance |
CONFIG_UART_2_NRF_PARITY_BIT
|
Enable parity bit |
CONFIG_UART_2_NRF_TX_BUFFER_SIZE
|
Size of RAM buffer |
CONFIG_UART_2_NRF_UARTE
|
|
CONFIG_UART_3_ASYNC
|
Enable Asynchronous API support on port 3 |
CONFIG_UART_3_ENHANCED_POLL_OUT
|
Efficient poll out on port 3 |
CONFIG_UART_3_GPIO_MANAGEMENT
|
Enable GPIO management on port 3 |
CONFIG_UART_3_INTERRUPT_DRIVEN
|
Enable interrupt support on port 3 |
CONFIG_UART_3_NRF_ASYNC_LOW_POWER
|
Low power mode |
CONFIG_UART_3_NRF_HW_ASYNC
|
Use hardware RX byte counting |
CONFIG_UART_3_NRF_HW_ASYNC_TIMER
|
Timer instance |
CONFIG_UART_3_NRF_PARITY_BIT
|
Enable parity bit |
CONFIG_UART_3_NRF_TX_BUFFER_SIZE
|
Size of RAM buffer |
CONFIG_UART_3_NRF_UARTE
|
|
CONFIG_UART_ALTERA_JTAG
|
Nios II JTAG UART driver |
CONFIG_UART_APBUART
|
ABPUART serial driver |
CONFIG_UART_ASYNC_API
|
Enable new asynchronous UART API [EXPERIMENTAL] |
CONFIG_UART_CC13XX_CC26XX
|
TI SimpleLink CC13xx / CC26xx UART driver |
CONFIG_UART_CC32XX
|
CC32XX UART driver |
CONFIG_UART_CMSDK_APB
|
ARM CMSDK APB UART driver |
CONFIG_UART_CONSOLE
|
Use UART for console |
CONFIG_UART_CONSOLE_DEBUG_SERVER_HOOKS
|
Debug server hooks in debug console |
CONFIG_UART_CONSOLE_INIT_PRIORITY
|
Init priority |
CONFIG_UART_CONSOLE_INPUT_EXPIRED
|
Enable support for UART console input expired mechanism |
CONFIG_UART_CONSOLE_INPUT_EXPIRED_TIMEOUT
|
Fixed amount of time to keep the UART console in use flag true |
CONFIG_UART_CONSOLE_LOG_LEVEL
|
|
CONFIG_UART_CONSOLE_LOG_LEVEL_DBG
|
Debug |
CONFIG_UART_CONSOLE_LOG_LEVEL_ERR
|
Error |
CONFIG_UART_CONSOLE_LOG_LEVEL_INF
|
Info |
CONFIG_UART_CONSOLE_LOG_LEVEL_OFF
|
Off |
CONFIG_UART_CONSOLE_LOG_LEVEL_WRN
|
Warning |
CONFIG_UART_CONSOLE_MCUMGR
|
Enable UART console mcumgr passthrough |
CONFIG_UART_CONSOLE_ON_DEV_NAME
|
Device Name of UART Device for UART Console |
CONFIG_UART_DRV_CMD
|
Enable driver commands API |
CONFIG_UART_ENHANCED_POLL_OUT
|
|
CONFIG_UART_ESP32
|
ESP32 UART driver |
CONFIG_UART_GECKO
|
Gecko UART/USART driver |
CONFIG_UART_IMX
|
NXP i.MX7 family processor UART driver |
CONFIG_UART_INTERRUPT_DRIVEN
|
Enable UART Interrupt support |
CONFIG_UART_LINE_CTRL
|
Enable Serial Line Control API |
CONFIG_UART_LITEUART
|
LiteUART serial driver |
CONFIG_UART_LPC11U6X
|
LPC11U6X serial driver |
CONFIG_UART_MCUMGR
|
Enable mcumgr UART driver |
CONFIG_UART_MCUMGR_ON_DEV_NAME
|
Device Name of UART Device for mcumgr UART |
CONFIG_UART_MCUMGR_RX_BUF_COUNT
|
Number of receive buffers for mcumgr fragments received over UART |
CONFIG_UART_MCUMGR_RX_BUF_SIZE
|
Size of receive buffer for mcumgr fragments received over UART, in bytes |
CONFIG_UART_MCUX
|
MCUX uart driver |
CONFIG_UART_MCUX_FLEXCOMM
|
MCUX FLEXCOMM UART driver |
CONFIG_UART_MCUX_IUART
|
MCUX IUART driver |
CONFIG_UART_MCUX_LPSCI
|
MCUX LPSCI driver |
CONFIG_UART_MCUX_LPUART
|
MCUX LPUART driver |
CONFIG_UART_MIV
|
Mi-V serial driver |
CONFIG_UART_MSP432P4XX
|
MSP432P4XX UART driver |
CONFIG_UART_MUX
|
Enable UART muxing (GSM 07.10) support [EXPERIMENTAL] |
CONFIG_UART_MUX_DEVICE_COUNT
|
Number of UART mux devices (DLCIs) |
CONFIG_UART_MUX_DEVICE_NAME
|
UART mux device name template |
CONFIG_UART_MUX_INIT_PRIORITY
|
Init priority |
CONFIG_UART_MUX_LOG_LEVEL
|
|
CONFIG_UART_MUX_LOG_LEVEL_DBG
|
Debug |
CONFIG_UART_MUX_LOG_LEVEL_ERR
|
Error |
CONFIG_UART_MUX_LOG_LEVEL_INF
|
Info |
CONFIG_UART_MUX_LOG_LEVEL_OFF
|
Off |
CONFIG_UART_MUX_LOG_LEVEL_WRN
|
Warning |
CONFIG_UART_MUX_REAL_DEVICE_COUNT
|
Number of real UART devices |
CONFIG_UART_MUX_RINGBUF_SIZE
|
UART mux ring buffer size |
CONFIG_UART_MUX_RX_PRIORITY
|
RX workqueue thread priority |
CONFIG_UART_MUX_RX_STACK_SIZE
|
Size of the stack allocated for receiving data from UART |
CONFIG_UART_MUX_TEMP_BUF_SIZE
|
Size of the temp buffer when reading data from real UART |
CONFIG_UART_MUX_VERBOSE_DEBUG
|
Print hexdump of sent and received packets |
CONFIG_UART_NATIVE_POSIX
|
UART driver for native_posix |
CONFIG_UART_NATIVE_POSIX_PORT_1_ENABLE
|
Enable second UART port |
CONFIG_UART_NATIVE_WAIT_PTS_READY_ENABLE
|
Support waiting for pseudo terminal client readiness |
CONFIG_UART_NPCX
|
Nuvoton NPCX embedded controller (EC) serial driver |
CONFIG_UART_NRFX
|
nRF UART nrfx drivers |
CONFIG_UART_NS16550
|
NS16550 serial driver |
CONFIG_UART_NS16550_ACCESS_WORD_ONLY
|
NS16550 only allows word access |
CONFIG_UART_NS16550_DRV_CMD
|
Enable Driver Commands |
CONFIG_UART_NS16550_LINE_CTRL
|
Enable Serial Line Control for Apps |
CONFIG_UART_NS16750
|
Enable UART 16750 (64-bytes FIFO and auto flow control) |
CONFIG_UART_NUVOTON
|
NUVOTON MCU serial driver |
CONFIG_UART_PIPE
|
Enable pipe UART driver |
CONFIG_UART_PIPE_ON_DEV_NAME
|
Device Name of UART Device for pipe UART |
CONFIG_UART_PL011
|
ARM PL011 UART Driver |
CONFIG_UART_PL011_PORT0
|
Enable driver for UART 0 |
CONFIG_UART_PL011_PORT1
|
Enable driver for UART 1 |
CONFIG_UART_PL011_SBSA
|
Enable SBSA UART |
CONFIG_UART_PSOC6
|
PSoC-6 MCU SCB serial driver |
CONFIG_UART_RCAR
|
Renesas R-Car UART Driver |
CONFIG_UART_RTT
|
Enable UART RTT driver |
CONFIG_UART_RTT_0
|
|
CONFIG_UART_RTT_1
|
|
CONFIG_UART_RTT_2
|
|
CONFIG_UART_RTT_3
|
|
CONFIG_UART_RTT_DRIVER
|
|
CONFIG_UART_RV32M1_LPUART
|
RV32M1 LPUART driver |
CONFIG_UART_RV32M1_LPUART_0
|
UART 0 |
CONFIG_UART_RV32M1_LPUART_1
|
UART 1 |
CONFIG_UART_RV32M1_LPUART_2
|
UART 2 |
CONFIG_UART_RV32M1_LPUART_3
|
UART 3 |
CONFIG_UART_SAM
|
Atmel SAM MCU family UART driver |
CONFIG_UART_SAM0
|
Atmel SAM0 series SERCOM USART driver |
CONFIG_UART_SHELL_ON_DEV_NAME
|
Device Name of UART Device for SHELL_BACKEND_SERIAL |
CONFIG_UART_SIFIVE
|
SiFive Freedom serial driver |
CONFIG_UART_SIFIVE_PORT_0
|
Enable SIFIVE Port 0 |
CONFIG_UART_SIFIVE_PORT_0_RXCNT_IRQ
|
Port 0 RX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_0_TXCNT_IRQ
|
Port 0 TX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_1
|
Enable SIFIVE Port 1 |
CONFIG_UART_SIFIVE_PORT_1_RXCNT_IRQ
|
Port 0 RX Interrupt Threshold Count |
CONFIG_UART_SIFIVE_PORT_1_TXCNT_IRQ
|
Port 1 TX Interrupt Threshold Count |
CONFIG_UART_STELLARIS
|
Stellaris serial driver |
CONFIG_UART_STELLARIS_PORT_0
|
Enable Stellaris UART Port 0 |
CONFIG_UART_STELLARIS_PORT_1
|
Enable Stellaris UART Port 1 |
CONFIG_UART_STELLARIS_PORT_2
|
Enable Stellaris UART Port 2 |
CONFIG_UART_STM32
|
STM32 MCU serial driver |
CONFIG_UART_TELINK_B91
|
Telink B91 UART driver |
CONFIG_UART_USE_RUNTIME_CONFIGURE
|
Enable runtime configuration for UART controllers |
CONFIG_UART_XLNX_PS
|
Xilinx serial driver for MPSoC |
CONFIG_UART_XLNX_UARTLITE
|
Xilinx UART Lite |
CONFIG_UART_XMC4XXX
|
XMC4XX UART driver |
CONFIG_UBSAN
|
Build with undefined behavior sanitizer |
CONFIG_UPDATEABLE_IMAGE_NUMBER
|
Number of updateable images |
CONFIG_UPDATEHUB
|
UpdateHub Firmware Over-the-Air support |
CONFIG_UPDATEHUB_CE
|
Use UpdateHub Community Edition Sever |
CONFIG_UPDATEHUB_COAP_BLOCK_SIZE_EXP
|
Max CoAP block size defined as 2^(4 + EXP) |
CONFIG_UPDATEHUB_COAP_CONN_TIMEOUT
|
CoAP connection timeout in seconds |
CONFIG_UPDATEHUB_COAP_MAX_RETRY
|
Maximum retries attempts to download a packet |
CONFIG_UPDATEHUB_DOWNLOAD_SHA256_VERIFICATION
|
SHA-256 on download |
CONFIG_UPDATEHUB_DOWNLOAD_STORAGE_SHA256_VERIFICATION
|
SHA-256 from both download and flash |
CONFIG_UPDATEHUB_DTLS
|
Activate communication CoAPS/DTLS |
CONFIG_UPDATEHUB_LOG_LEVEL
|
|
CONFIG_UPDATEHUB_LOG_LEVEL_DBG
|
Debug |
CONFIG_UPDATEHUB_LOG_LEVEL_ERR
|
Error |
CONFIG_UPDATEHUB_LOG_LEVEL_INF
|
Info |
CONFIG_UPDATEHUB_LOG_LEVEL_OFF
|
Off |
CONFIG_UPDATEHUB_LOG_LEVEL_WRN
|
Warning |
CONFIG_UPDATEHUB_POLL_INTERVAL
|
Time to poll interval (in minutes) |
CONFIG_UPDATEHUB_PRODUCT_UID
|
Product Unique Identifier (UID) |
CONFIG_UPDATEHUB_SERVER
|
User address for the updatehub-ce-server |
CONFIG_UPDATEHUB_SHELL
|
Enable UpdateHub shell utilities |
CONFIG_UPDATEHUB_STORAGE_SHA256_VERIFICATION
|
SHA-256 from flash |
CONFIG_UPDATEHUB_SUPPORTED_HARDWARE_MAX
|
Max number of supported hardware |
CONFIG_USART_SAM
|
Atmel SAM MCU family USART driver |
CONFIG_USB
|
USB |
CONFIG_USB_AUDIO_LOG_LEVEL
|
|
CONFIG_USB_AUDIO_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_AUDIO_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_AUDIO_LOG_LEVEL_INF
|
Info |
CONFIG_USB_AUDIO_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_AUDIO_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_CDC_ACM
|
USB CDC ACM Device Class support |
CONFIG_USB_CDC_ACM_DEVICE_COUNT
|
Number of USB_CDC_ACM Devices |
CONFIG_USB_CDC_ACM_DEVICE_NAME
|
USB CDC ACM device name template |
CONFIG_USB_CDC_ACM_LOG_LEVEL
|
|
CONFIG_USB_CDC_ACM_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_CDC_ACM_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_CDC_ACM_LOG_LEVEL_INF
|
Info |
CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_CDC_ACM_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_CDC_ACM_RINGBUF_SIZE
|
USB CDC ACM ring buffer size |
CONFIG_USB_COMPOSITE_DEVICE
|
Enable composite device driver |
CONFIG_USB_DC_NXP_EHCI
|
Kinetis and RT EHCI USB Device Controller Driver |
CONFIG_USB_DC_SAM0
|
SAM0 series USB Device Controller driver |
CONFIG_USB_DC_SAM_USBHS
|
SAM series USB HS Device Controller driver |
CONFIG_USB_DC_STM32
|
USB device controller driver for STM32 devices |
CONFIG_USB_DC_STM32_DISCONN_ENABLE
|
|
CONFIG_USB_DEVICE_AUDIO
|
USB Audio Device Class Driver |
CONFIG_USB_DEVICE_BLUETOOTH
|
USB Bluetooth Device Class support |
CONFIG_USB_DEVICE_BLUETOOTH_BIG_BUF
|
|
CONFIG_USB_DEVICE_BLUETOOTH_VS_H4
|
Enable USB Bluetooth H4 vendor command |
CONFIG_USB_DEVICE_BOS
|
Enable USB Binary Device Object Store (BOS) |
CONFIG_USB_DEVICE_BT_H4
|
USB Bluetooth H4 Device Class support |
CONFIG_USB_DEVICE_DFU_PID
|
USB DFU Product ID |
CONFIG_USB_DEVICE_DRIVER
|
|
CONFIG_USB_DEVICE_HID
|
USB Human Interface Device support |
CONFIG_USB_DEVICE_LOG_LEVEL
|
|
CONFIG_USB_DEVICE_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_DEVICE_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_DEVICE_LOG_LEVEL_INF
|
Info |
CONFIG_USB_DEVICE_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_DEVICE_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_DEVICE_LOOPBACK
|
USB Loopback Function Driver |
CONFIG_USB_DEVICE_MANUFACTURER
|
USB manufacturer name |
CONFIG_USB_DEVICE_NETWORK
|
|
CONFIG_USB_DEVICE_NETWORK_ECM
|
USB Ethernet Control Model (ECM) Networking device |
CONFIG_USB_DEVICE_NETWORK_ECM_MAC
|
USB ECM Host OS MAC Address |
CONFIG_USB_DEVICE_NETWORK_EEM
|
USB Ethernet Emulation Model (EEM) Networking device |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL
|
|
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_INF
|
Info |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_DEVICE_NETWORK_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_DEVICE_NETWORK_RNDIS
|
USB Remote NDIS (RNDIS) Networking device |
CONFIG_USB_DEVICE_OS_DESC
|
Enable MS OS Descriptors support |
CONFIG_USB_DEVICE_PID
|
USB Product ID |
CONFIG_USB_DEVICE_PRODUCT
|
USB product name |
CONFIG_USB_DEVICE_REMOTE_WAKEUP
|
Enable support for remote wakeup |
CONFIG_USB_DEVICE_SN
|
USB device Serial Number String |
CONFIG_USB_DEVICE_SOF
|
Enable Start of Frame processing in events |
CONFIG_USB_DEVICE_STACK
|
USB Device Support |
CONFIG_USB_DEVICE_VID
|
USB Vendor ID |
CONFIG_USB_DFU_CLASS
|
USB DFU Class Driver |
CONFIG_USB_DFU_DEFAULT_POLLTIMEOUT
|
Default value for bwPollTimeout |
CONFIG_USB_DFU_DETACH_TIMEOUT
|
|
CONFIG_USB_DRIVER_LOG_LEVEL
|
|
CONFIG_USB_DRIVER_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_DRIVER_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_DRIVER_LOG_LEVEL_INF
|
Info |
CONFIG_USB_DRIVER_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_DRIVER_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_DW
|
Designware USB Device Controller Driver |
CONFIG_USB_DW_USB_2_0
|
DesignWare Controller and PHY support for USB specification 2.0 |
CONFIG_USB_HID_BOOT_PROTOCOL
|
Enable USB HID Boot Protocol handling |
CONFIG_USB_HID_DEVICE_COUNT
|
Number of USB_HID Devices |
CONFIG_USB_HID_DEVICE_NAME
|
USB HID device name template |
CONFIG_USB_HID_LOG_LEVEL
|
|
CONFIG_USB_HID_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_HID_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_HID_LOG_LEVEL_INF
|
Info |
CONFIG_USB_HID_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_HID_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_HID_POLL_INTERVAL_MS
|
Polling interval |
CONFIG_USB_HID_PROTOCOL_CODE
|
HID Boot Interface protocol code (DEPRECATED) |
CONFIG_USB_HID_REPORTS
|
Number of HID idle reports in the instance |
CONFIG_USB_KINETIS
|
Kinetis USB Device Controller Driver |
CONFIG_USB_MASS_STORAGE
|
USB Mass Storage Device Class support |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL
|
|
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_DBG
|
Debug |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_ERR
|
Error |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_INF
|
Info |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_OFF
|
Off |
CONFIG_USB_MASS_STORAGE_LOG_LEVEL_WRN
|
Warning |
CONFIG_USB_MAX_ALT_SETTING
|
Size of the array where alternate settings are stored |
CONFIG_USB_MAX_NUM_TRANSFERS
|
Set number of USB transfer data buffers |
CONFIG_USB_MAX_POWER
|
Set bMaxPower value |
CONFIG_USB_NATIVE_POSIX
|
Native Posix USB Device Controller Driver |
CONFIG_USB_NRFX
|
Nordic Semiconductor USB Device Controller Driver |
CONFIG_USB_NRFX_ATTACHED_EVENT_DELAY
|
USBD attached event delay |
CONFIG_USB_NRFX_EVT_QUEUE_SIZE
|
USBD event queue size |
CONFIG_USB_NRFX_WORK_QUEUE_STACK_SIZE
|
USBD work queue stack size |
CONFIG_USB_NUMOF_EP_WRITE_RETRIES
|
Number of endpoint write retries |
CONFIG_USB_PID_BLE_HCI_H4_SAMPLE
|
|
CONFIG_USB_PID_BLE_HCI_SAMPLE
|
|
CONFIG_USB_PID_CDC_ACM_COMPOSITE_SAMPLE
|
|
CONFIG_USB_PID_CDC_ACM_SAMPLE
|
|
CONFIG_USB_PID_CONSOLE_SAMPLE
|
|
CONFIG_USB_PID_DFU_SAMPLE
|
|
CONFIG_USB_PID_HID_CDC_SAMPLE
|
|
CONFIG_USB_PID_HID_MOUSE_SAMPLE
|
|
CONFIG_USB_PID_HID_SAMPLE
|
|
CONFIG_USB_PID_MASS_SAMPLE
|
|
CONFIG_USB_PID_TESTUSB_SAMPLE
|
|
CONFIG_USB_PID_WEBUSB_SAMPLE
|
|
CONFIG_USB_PID_WPANUSB_SAMPLE
|
|
CONFIG_USB_REQUEST_BUFFER_SIZE
|
Set buffer size for Standard, Class and Vendor request handlers |
CONFIG_USB_SELF_POWERED
|
Set Self-powered characteristic |
CONFIG_USB_UART_CONSOLE
|
Use USB port for console outputs |
CONFIG_USB_WORKQUEUE
|
Use a dedicate work queue in the USB subsystem |
CONFIG_USB_WORKQUEUE_PRIORITY
|
USB workqueue priority |
CONFIG_USB_WORKQUEUE_STACK_SIZE
|
USB workqueue stack size |
CONFIG_USERSPACE
|
User mode threads |
CONFIG_USE_DT_CODE_PARTITION
|
Link application into /chosen/zephyr,code-partition from devicetree |
CONFIG_USE_SEGGER_RTT
|
Enable SEGGER RTT libraries. |
CONFIG_USE_STDC_A3G4250D
|
|
CONFIG_USE_STDC_AIS2DW12
|
|
CONFIG_USE_STDC_AIS328DQ
|
|
CONFIG_USE_STDC_AIS3624DQ
|
|
CONFIG_USE_STDC_H3LIS100DL
|
|
CONFIG_USE_STDC_H3LIS331DL
|
|
CONFIG_USE_STDC_HTS221
|
|
CONFIG_USE_STDC_I3G4250D
|
|
CONFIG_USE_STDC_IIS2DH
|
|
CONFIG_USE_STDC_IIS2DLPC
|
|
CONFIG_USE_STDC_IIS2ICLX
|
|
CONFIG_USE_STDC_IIS2MDC
|
|
CONFIG_USE_STDC_IIS328DQ
|
|
CONFIG_USE_STDC_IIS3DHHC
|
|
CONFIG_USE_STDC_IIS3DWB
|
|
CONFIG_USE_STDC_ISM303DAC
|
|
CONFIG_USE_STDC_ISM330DHCX
|
|
CONFIG_USE_STDC_ISM330DLC
|
|
CONFIG_USE_STDC_L20G20IS
|
|
CONFIG_USE_STDC_L3GD20H
|
|
CONFIG_USE_STDC_LIS25BA
|
|
CONFIG_USE_STDC_LIS2DE12
|
|
CONFIG_USE_STDC_LIS2DH12
|
|
CONFIG_USE_STDC_LIS2DS12
|
|
CONFIG_USE_STDC_LIS2DTW12
|
|
CONFIG_USE_STDC_LIS2DW12
|
|
CONFIG_USE_STDC_LIS2HH12
|
|
CONFIG_USE_STDC_LIS2MDL
|
|
CONFIG_USE_STDC_LIS331DLH
|
|
CONFIG_USE_STDC_LIS3DE
|
|
CONFIG_USE_STDC_LIS3DH
|
|
CONFIG_USE_STDC_LIS3DHH
|
|
CONFIG_USE_STDC_LIS3DSH
|
|
CONFIG_USE_STDC_LIS3MDL
|
|
CONFIG_USE_STDC_LPS22HB
|
|
CONFIG_USE_STDC_LPS22HH
|
|
CONFIG_USE_STDC_LPS25HB
|
|
CONFIG_USE_STDC_LPS27HHW
|
|
CONFIG_USE_STDC_LPS33HW
|
|
CONFIG_USE_STDC_LPS33K
|
|
CONFIG_USE_STDC_LPS33W
|
|
CONFIG_USE_STDC_LSM303AGR
|
|
CONFIG_USE_STDC_LSM303AH
|
|
CONFIG_USE_STDC_LSM6DS3
|
|
CONFIG_USE_STDC_LSM6DS3TR
|
|
CONFIG_USE_STDC_LSM6DSL
|
|
CONFIG_USE_STDC_LSM6DSM
|
|
CONFIG_USE_STDC_LSM6DSO
|
|
CONFIG_USE_STDC_LSM6DSO32
|
|
CONFIG_USE_STDC_LSM6DSOX
|
|
CONFIG_USE_STDC_LSM6DSR
|
|
CONFIG_USE_STDC_LSM6DSRX
|
|
CONFIG_USE_STDC_LSM9DS1
|
|
CONFIG_USE_STDC_STTS22H
|
|
CONFIG_USE_STDC_STTS751
|
|
CONFIG_USE_STM32_ASSERT
|
STM32Cube HAL and LL drivers asserts |
CONFIG_USE_STM32_HAL_ADC
|
|
CONFIG_USE_STM32_HAL_ADC_EX
|
|
CONFIG_USE_STM32_HAL_CAN
|
|
CONFIG_USE_STM32_HAL_CEC
|
|
CONFIG_USE_STM32_HAL_COMP
|
|
CONFIG_USE_STM32_HAL_CORTEX
|
|
CONFIG_USE_STM32_HAL_CRC
|
|
CONFIG_USE_STM32_HAL_CRC_EX
|
|
CONFIG_USE_STM32_HAL_CRYP
|
|
CONFIG_USE_STM32_HAL_CRYP_EX
|
|
CONFIG_USE_STM32_HAL_DAC
|
|
CONFIG_USE_STM32_HAL_DAC_EX
|
|
CONFIG_USE_STM32_HAL_DCMI
|
|
CONFIG_USE_STM32_HAL_DCMI_EX
|
|
CONFIG_USE_STM32_HAL_DFSDM
|
|
CONFIG_USE_STM32_HAL_DFSDM_EX
|
|
CONFIG_USE_STM32_HAL_DMA
|
|
CONFIG_USE_STM32_HAL_DMA2D
|
|
CONFIG_USE_STM32_HAL_DMA_EX
|
|
CONFIG_USE_STM32_HAL_DSI
|
|
CONFIG_USE_STM32_HAL_ETH
|
|
CONFIG_USE_STM32_HAL_ETH_EX
|
|
CONFIG_USE_STM32_HAL_EXTI
|
|
CONFIG_USE_STM32_HAL_FDCAN
|
|
CONFIG_USE_STM32_HAL_FIREWALL
|
|
CONFIG_USE_STM32_HAL_FLASH
|
|
CONFIG_USE_STM32_HAL_FLASH_EX
|
|
CONFIG_USE_STM32_HAL_FLASH_RAMFUNC
|
|
CONFIG_USE_STM32_HAL_FMPI2C
|
|
CONFIG_USE_STM32_HAL_FMPI2C_EX
|
|
CONFIG_USE_STM32_HAL_GFXMMU
|
|
CONFIG_USE_STM32_HAL_GPIO
|
|
CONFIG_USE_STM32_HAL_GPIO_EX
|
|
CONFIG_USE_STM32_HAL_HASH
|
|
CONFIG_USE_STM32_HAL_HASH_EX
|
|
CONFIG_USE_STM32_HAL_HCD
|
|
CONFIG_USE_STM32_HAL_HRTIM
|
|
CONFIG_USE_STM32_HAL_HSEM
|
|
CONFIG_USE_STM32_HAL_I2C
|
|
CONFIG_USE_STM32_HAL_I2C_EX
|
|
CONFIG_USE_STM32_HAL_I2S
|
|
CONFIG_USE_STM32_HAL_I2S_EX
|
|
CONFIG_USE_STM32_HAL_IPCC
|
|
CONFIG_USE_STM32_HAL_IRDA
|
|
CONFIG_USE_STM32_HAL_IWDG
|
|
CONFIG_USE_STM32_HAL_JPEG
|
|
CONFIG_USE_STM32_HAL_LCD
|
|
CONFIG_USE_STM32_HAL_LPTIM
|
|
CONFIG_USE_STM32_HAL_LTDC
|
|
CONFIG_USE_STM32_HAL_LTDC_EX
|
|
CONFIG_USE_STM32_HAL_MDIOS
|
|
CONFIG_USE_STM32_HAL_MDMA
|
|
CONFIG_USE_STM32_HAL_MMC
|
|
CONFIG_USE_STM32_HAL_MMC_EX
|
|
CONFIG_USE_STM32_HAL_NAND
|
|
CONFIG_USE_STM32_HAL_NOR
|
|
CONFIG_USE_STM32_HAL_OPAMP
|
|
CONFIG_USE_STM32_HAL_OPAMP_EX
|
|
CONFIG_USE_STM32_HAL_OSPI
|
|
CONFIG_USE_STM32_HAL_PCCARD
|
|
CONFIG_USE_STM32_HAL_PCD
|
|
CONFIG_USE_STM32_HAL_PCD_EX
|
|
CONFIG_USE_STM32_HAL_PSSI
|
|
CONFIG_USE_STM32_HAL_PWR
|
|
CONFIG_USE_STM32_HAL_PWR_EX
|
|
CONFIG_USE_STM32_HAL_QSPI
|
|
CONFIG_USE_STM32_HAL_RAMECC
|
|
CONFIG_USE_STM32_HAL_RNG
|
|
CONFIG_USE_STM32_HAL_RTC
|
|
CONFIG_USE_STM32_HAL_RTC_EX
|
|
CONFIG_USE_STM32_HAL_SAI
|
|
CONFIG_USE_STM32_HAL_SAI_EX
|
|
CONFIG_USE_STM32_HAL_SD
|
|
CONFIG_USE_STM32_HAL_SDADC
|
|
CONFIG_USE_STM32_HAL_SDRAM
|
|
CONFIG_USE_STM32_HAL_SD_EX
|
|
CONFIG_USE_STM32_HAL_SMARTCARD
|
|
CONFIG_USE_STM32_HAL_SMARTCARD_EX
|
|
CONFIG_USE_STM32_HAL_SMBUS
|
|
CONFIG_USE_STM32_HAL_SPDIFRX
|
|
CONFIG_USE_STM32_HAL_SPI
|
|
CONFIG_USE_STM32_HAL_SPI_EX
|
|
CONFIG_USE_STM32_HAL_SRAM
|
|
CONFIG_USE_STM32_HAL_SWPMI
|
|
CONFIG_USE_STM32_HAL_TIM
|
|
CONFIG_USE_STM32_HAL_TIM_EX
|
|
CONFIG_USE_STM32_HAL_TSC
|
|
CONFIG_USE_STM32_HAL_UART
|
|
CONFIG_USE_STM32_HAL_UART_EX
|
|
CONFIG_USE_STM32_HAL_USART
|
|
CONFIG_USE_STM32_HAL_USART_EX
|
|
CONFIG_USE_STM32_HAL_WWDG
|
|
CONFIG_USE_STM32_LL_ADC
|
|
CONFIG_USE_STM32_LL_BDMA
|
|
CONFIG_USE_STM32_LL_COMP
|
|
CONFIG_USE_STM32_LL_CRC
|
|
CONFIG_USE_STM32_LL_CRS
|
|
CONFIG_USE_STM32_LL_DAC
|
|
CONFIG_USE_STM32_LL_DELAYBLOCK
|
|
CONFIG_USE_STM32_LL_DMA
|
|
CONFIG_USE_STM32_LL_DMA2D
|
|
CONFIG_USE_STM32_LL_EXTI
|
|
CONFIG_USE_STM32_LL_FMC
|
|
CONFIG_USE_STM32_LL_FSMC
|
|
CONFIG_USE_STM32_LL_GPIO
|
|
CONFIG_USE_STM32_LL_HRTIM
|
|
CONFIG_USE_STM32_LL_I2C
|
|
CONFIG_USE_STM32_LL_IPCC
|
|
CONFIG_USE_STM32_LL_LPTIM
|
|
CONFIG_USE_STM32_LL_LPUART
|
|
CONFIG_USE_STM32_LL_MDMA
|
|
CONFIG_USE_STM32_LL_OPAMP
|
|
CONFIG_USE_STM32_LL_PWR
|
|
CONFIG_USE_STM32_LL_RCC
|
|
CONFIG_USE_STM32_LL_RNG
|
|
CONFIG_USE_STM32_LL_RTC
|
|
CONFIG_USE_STM32_LL_SDMMC
|
|
CONFIG_USE_STM32_LL_SPI
|
|
CONFIG_USE_STM32_LL_SWPMI
|
|
CONFIG_USE_STM32_LL_TIM
|
|
CONFIG_USE_STM32_LL_USART
|
|
CONFIG_USE_STM32_LL_USB
|
|
CONFIG_USE_STM32_LL_UTILS
|
|
CONFIG_USE_SWITCH
|
Use new-style _arch_switch instead of arch_swap |
CONFIG_USE_SWITCH_SUPPORTED
|
|
CONFIG_VCNL4040
|
VCNL4040 Proximity and Ambient Light Sensor |
CONFIG_VCNL4040_ENABLE_ALS
|
Enable ambient light sensor |
CONFIG_VCNL4040_THREAD_PRIORITY
|
Thread priority |
CONFIG_VCNL4040_THREAD_STACK_SIZE
|
Thread stack size |
CONFIG_VCNL4040_TRIGGER
|
|
CONFIG_VCNL4040_TRIGGER_GLOBAL_THREAD
|
Use global thread |
CONFIG_VCNL4040_TRIGGER_NONE
|
No trigger |
CONFIG_VCNL4040_TRIGGER_OWN_THREAD
|
Use own thread |
CONFIG_VEGA_SDK_HAL
|
RV32M1 VEGA SDK support |
CONFIG_VEXRISCV_LITEX_IRQ
|
VexRiscv LiteX Interrupt controller |
CONFIG_VIDEO
|
VIDEO hardware support |
CONFIG_VIDEO_BUFFER_POOL_ALIGN
|
Alignment of the video pool’s buffer |
CONFIG_VIDEO_BUFFER_POOL_NUM_MAX
|
Number of maximum sized buffer in the video pool |
CONFIG_VIDEO_BUFFER_POOL_SZ_MAX
|
Size of the largest buffer in the video pool |
CONFIG_VIDEO_INIT_PRIORITY
|
Video initialization priority |
CONFIG_VIDEO_MCUX_CSI
|
NXP MCUX CMOS Sensor Interface (CSI) driver |
CONFIG_VIDEO_MT9M114
|
MT9M114 Aptina CMOS digital image sensor |
CONFIG_VIDEO_OV7725
|
OV7725 CMOS digital image sensor |
CONFIG_VIDEO_SW_GENERATOR
|
Video Software Generator |
CONFIG_VIRTUALIZATION
|
Virtualization guests drivers |
CONFIG_VL53L0X
|
VL53L0X time of flight sensor |
CONFIG_VL53L0X_PROXIMITY_THRESHOLD
|
Proximity threshold in millimeters |
CONFIG_WAITQ_DUMB
|
Simple linked-list wait_q |
CONFIG_WAITQ_SCALABLE
|
Use scalable wait_q implementation |
CONFIG_WATCHDOG
|
Watchdog Support |
CONFIG_WAVE_GEN_LIB_LOG_LEVEL
|
|
CONFIG_WAVE_GEN_LIB_LOG_LEVEL_DBG
|
Debug |
CONFIG_WAVE_GEN_LIB_LOG_LEVEL_ERR
|
Error |
CONFIG_WAVE_GEN_LIB_LOG_LEVEL_INF
|
Info |
CONFIG_WAVE_GEN_LIB_LOG_LEVEL_OFF
|
Off |
CONFIG_WAVE_GEN_LIB_LOG_LEVEL_WRN
|
Warning |
CONFIG_WDOG_CMSDK_APB
|
CMSDK APB Watchdog Driver for ARM family of MCUs |
CONFIG_WDOG_CMSDK_APB_START_AT_BOOT
|
Start Watchdog during boot |
CONFIG_WDOG_ENABLE_AT_BOOT
|
Keep watchdog timer enabled at boot |
CONFIG_WDOG_INIT
|
|
CONFIG_WDOG_INITIAL_TIMEOUT
|
Initial timeout for the watchdog timer in milliseconds |
CONFIG_WDT_CC32XX
|
Watchdog Driver for cc32xx family of MCUs |
CONFIG_WDT_CC32XX_INITIAL_TIMEOUT
|
Value for WDT timeout in ms |
CONFIG_WDT_DISABLE_AT_BOOT
|
Disable at boot |
CONFIG_WDT_ESP32
|
ESP32 Watchdog (WDT) Driver |
CONFIG_WDT_GECKO
|
Gecko series Watchdog (WDOG) Driver |
CONFIG_WDT_ITE_IT8XXX2
|
ITE it8xxx2 Watchdog Timer (WDT) driver |
CONFIG_WDT_ITE_WARNING_LEADING_TIME_MS
|
Number of ms before generating watchdog event/signal |
CONFIG_WDT_LOG_LEVEL
|
|
CONFIG_WDT_LOG_LEVEL_DBG
|
Debug |
CONFIG_WDT_LOG_LEVEL_ERR
|
Error |
CONFIG_WDT_LOG_LEVEL_INF
|
Info |
CONFIG_WDT_LOG_LEVEL_OFF
|
Off |
CONFIG_WDT_LOG_LEVEL_WRN
|
Warning |
CONFIG_WDT_MCUX_IMX_WDOG
|
MCUX IMX WDOG driver |
CONFIG_WDT_MCUX_WDOG
|
MCUX WDOG driver |
CONFIG_WDT_MCUX_WDOG32
|
MCUX WDOG32 driver |
CONFIG_WDT_MCUX_WWDT
|
MCUX WWDT driver |
CONFIG_WDT_MULTISTAGE
|
Enable multistage timeouts |
CONFIG_WDT_NPCX
|
Nuvoton NPCX embedded controller (EC) Watchdog Timer driver |
CONFIG_WDT_NPCX_DELAY_CYCLES
|
Number of delay cycles before generating watchdog event/signal |
CONFIG_WDT_NRFX
|
nRF WDT nrfx driver |
CONFIG_WDT_SAM
|
Atmel SAM MCU Family Watchdog (WDT) Driver |
CONFIG_WDT_SAM0
|
Atmel SAM0 series Watchdog (WDT) Driver |
CONFIG_WDT_SIFIVE
|
SiFive Watchdog (WDT) Driver |
CONFIG_WDT_XEC
|
Microchip XEC series Watchdog Timer (WDT) driver |
CONFIG_WEBSOCKET_CLIENT
|
Websocket client support [EXPERIMENTAL] |
CONFIG_WEBSOCKET_MAX_CONTEXTS
|
Max number of websockets to allocate |
CONFIG_WIFI
|
Wi-Fi Drivers |
CONFIG_WIFI_ESP32
|
ESP32 SoC WiFi support |
CONFIG_WIFI_ESP_AT
|
Espressif AT Command support |
CONFIG_WIFI_ESP_AT_DNS_USE
|
Use DNS from ESP |
CONFIG_WIFI_ESP_AT_IP_ADDRESS
|
ESP Station mode IP Address |
CONFIG_WIFI_ESP_AT_IP_DHCP
|
DHCP |
CONFIG_WIFI_ESP_AT_IP_GATEWAY
|
Gateway Address |
CONFIG_WIFI_ESP_AT_IP_MASK
|
Network Mask |
CONFIG_WIFI_ESP_AT_IP_STATIC
|
Static |
CONFIG_WIFI_ESP_AT_MDM_RING_BUF_SIZE
|
Modem ring buffer size |
CONFIG_WIFI_ESP_AT_MDM_RX_BUF_COUNT
|
Modem RX buffer count |
CONFIG_WIFI_ESP_AT_MDM_RX_BUF_SIZE
|
Modem RX buffer size |
CONFIG_WIFI_ESP_AT_PASSIVE_MODE
|
Use passive mode |
CONFIG_WIFI_ESP_AT_RESET_TIMEOUT
|
Reset timeout |
CONFIG_WIFI_ESP_AT_RX_NET_PKT_ALLOC_TIMEOUT
|
Network interface RX packet allocation timeout |
CONFIG_WIFI_ESP_AT_RX_STACK_SIZE
|
Stack size for the Espressif esp wifi driver RX thread |
CONFIG_WIFI_ESP_AT_RX_THREAD_PRIORITY
|
Priority of RX thread |
CONFIG_WIFI_ESP_AT_VERSION_1_7
|
AT version 1.7 |
CONFIG_WIFI_ESP_AT_VERSION_2_0
|
AT version 2.0 |
CONFIG_WIFI_ESP_AT_WORKQ_STACK_SIZE
|
Stack size for the esp driver work queue |
CONFIG_WIFI_ESP_AT_WORKQ_THREAD_PRIORITY
|
Priority of work queue thread |
CONFIG_WIFI_ESWIFI
|
Inventek eS-WiFi support |
CONFIG_WIFI_ESWIFI_BUS_SPI
|
SPI Bus interface |
CONFIG_WIFI_ESWIFI_BUS_UART
|
UART Bus interface |
CONFIG_WIFI_ESWIFI_SHELL
|
esWiFi shell |
CONFIG_WIFI_ESWIFI_THREAD_PRIO
|
esWiFi threads priority |
CONFIG_WIFI_INIT_PRIORITY
|
Wi-Fi driver init priority |
CONFIG_WIFI_LOG_LEVEL
|
|
CONFIG_WIFI_LOG_LEVEL_DBG
|
Debug |
CONFIG_WIFI_LOG_LEVEL_DEFAULT
|
Default |
CONFIG_WIFI_LOG_LEVEL_ERR
|
Error |
CONFIG_WIFI_LOG_LEVEL_INF
|
Info |
CONFIG_WIFI_LOG_LEVEL_OFF
|
Off |
CONFIG_WIFI_LOG_LEVEL_WRN
|
Warning |
CONFIG_WIFI_OFFLOAD
|
Support offloaded Wi-Fi device drivers |
CONFIG_WIFI_SIMPLELINK
|
SimpleLink Wi-Fi driver support |
CONFIG_WIFI_SIMPLELINK_FAST_CONNECT_TIMEOUT
|
Time (in seconds) to wait for fast connect on startup |
CONFIG_WIFI_SIMPLELINK_MAX_PACKET_SIZE
|
Maximum size of a packet, in bytes |
CONFIG_WIFI_SIMPLELINK_MAX_SCAN_RETRIES
|
Number of retries to get network scan table |
CONFIG_WIFI_SIMPLELINK_NAME
|
Driver name |
CONFIG_WIFI_SIMPLELINK_SCAN_COUNT
|
Number of entries in network scan table: Max: 30 |
CONFIG_WIFI_WINC1500
|
WINC1500 driver support |
CONFIG_WIFI_WINC1500_BUF_CTR
|
Number of buffer per-buffer pool |
CONFIG_WIFI_WINC1500_MAX_PACKET_SIZE
|
Maximum size of a packet, in bytes |
CONFIG_WIFI_WINC1500_NAME
|
Driver name |
CONFIG_WIFI_WINC1500_OFFLOAD_MAX_SOCKETS
|
Maximum number of sockets that can be managed |
CONFIG_WIFI_WINC1500_REGION_ASIA
|
Region Asia |
CONFIG_WIFI_WINC1500_REGION_EUROPE
|
Region Europe |
CONFIG_WIFI_WINC1500_REGION_NORTH_AMERICA
|
Region North America |
CONFIG_WIFI_WINC1500_THREAD_PRIO
|
HAL callback handler thread priority |
CONFIG_WIFI_WINC1500_THREAD_STACK_SIZE
|
HAL callback handler thread stack size |
CONFIG_WINC1500_DRV_USE_OLD_SPI_SW
|
Use old SPI access method in the vendor HAL |
CONFIG_WS2812_STRIP
|
Enable WS2812 (and compatible) LED strip driver |
CONFIG_WS2812_STRIP_GPIO
|
Enable the GPIO driver |
CONFIG_WS2812_STRIP_SPI
|
Enable the SPI driver |
CONFIG_WWDG_STM32
|
System Window Watchdog (WWDG) Driver for STM32 family of MCUs |
CONFIG_X2APIC
|
Access local APIC in x2APIC mode |
CONFIG_X86
|
|
CONFIG_X86_64
|
Run in 64-bit mode |
CONFIG_X86_BOUNDS_CHECK_BYPASS_MITIGATION
|
|
CONFIG_X86_COMMON_PAGE_TABLE
|
Use a single page table for all threads |
CONFIG_X86_CPU_HAS_MMX
|
|
CONFIG_X86_CPU_HAS_SSE
|
|
CONFIG_X86_CPU_HAS_SSE2
|
|
CONFIG_X86_CPU_HAS_SSE3
|
|
CONFIG_X86_CPU_HAS_SSE41
|
|
CONFIG_X86_CPU_HAS_SSE42
|
|
CONFIG_X86_CPU_HAS_SSE4A
|
|
CONFIG_X86_CPU_HAS_SSSE3
|
|
CONFIG_X86_DYNAMIC_IRQ_STUBS
|
Number of dynamic interrupt stubs |
CONFIG_X86_ENABLE_TSS
|
|
CONFIG_X86_EXCEPTION_STACK_SIZE
|
Size of the exception stack(s) |
CONFIG_X86_EXCEPTION_STACK_TRACE
|
|
CONFIG_X86_EXTRA_PAGE_TABLE_PAGES
|
Reserve extra pages in page table |
CONFIG_X86_FP_USE_SOFT_FLOAT
|
Use Software Floating Point Operations |
CONFIG_X86_KPTI
|
Enable kernel page table isolation |
CONFIG_X86_MAX_ADDITIONAL_MEM_DOMAINS
|
Maximum number of memory domains |
CONFIG_X86_MEMMAP
|
Use memory map |
CONFIG_X86_MEMMAP_ENTRIES
|
Number of memory map entries |
CONFIG_X86_MFENCE_INSTRUCTION_SUPPORTED
|
X86 MFENCE instruction supported |
CONFIG_X86_MMU
|
Enable Memory Management Unit |
CONFIG_X86_MMX
|
Enable MMX Support |
CONFIG_X86_NO_LAZY_FP
|
|
CONFIG_X86_NO_MELTDOWN
|
|
CONFIG_X86_NO_SPECTRE_V1
|
|
CONFIG_X86_NO_SPECTRE_V2
|
|
CONFIG_X86_NO_SPECTRE_V4
|
|
CONFIG_X86_NO_SPECULATIVE_VULNERABILITIES
|
|
CONFIG_X86_PAE
|
Use PAE page tables |
CONFIG_X86_PC_COMPATIBLE
|
|
CONFIG_X86_SSE
|
Enable SSE Support |
CONFIG_X86_SSE2
|
Enable SSE2 Support |
CONFIG_X86_SSE3
|
Enable SSE3 Support |
CONFIG_X86_SSE41
|
Enable SSE4.1 Support |
CONFIG_X86_SSE42
|
Enable SSE4.2 Support |
CONFIG_X86_SSE4A
|
Enable SSE4A Support |
CONFIG_X86_SSE_FP_MATH
|
Compiler-generated SSEx instructions for floating point math |
CONFIG_X86_SSSE3
|
Enable SSSE3 (Supplemental SSE3) Support |
CONFIG_X86_STACK_PROTECTION
|
|
CONFIG_X86_USERSPACE
|
|
CONFIG_X86_USE_THREAD_LOCAL_STORAGE
|
|
CONFIG_X86_VERY_EARLY_CONSOLE
|
Support very early boot printk |
CONFIG_XIP
|
Execute in place |
CONFIG_XLNX_PSTTC_TIMER
|
Xilinx PS ttc timer support |
CONFIG_XLNX_PSTTC_TIMER_INDEX
|
Xilinx PS ttc timer index |
CONFIG_XOROSHIRO_RANDOM_GENERATOR
|
Use Xoroshiro128+ as PRNG |
CONFIG_XTAL_SYS_CLK_HZ
|
External oscillator frequency |
CONFIG_XTENSA
|
|
CONFIG_XTENSA_CONSOLE_INIT_PRIORITY
|
Init priority |
CONFIG_XTENSA_ENABLE_BACKTRACE
|
Enable backtrace on panic exception |
CONFIG_XTENSA_HAL
|
|
CONFIG_XTENSA_KERNEL_CPU_PTR_SR
|
|
CONFIG_XTENSA_NO_IPC
|
Core has no IPC support |
CONFIG_XTENSA_RESET_VECTOR
|
Build reset vector code |
CONFIG_XTENSA_SIM_CONSOLE
|
Use Xtensa simulator console |
CONFIG_XTENSA_TIMER
|
Xtensa timer support |
CONFIG_XTENSA_TIMER_ID
|
System timer CCOMPAREn register index |
CONFIG_XTENSA_USE_CORE_CRT1
|
Use crt1.S from core |
CONFIG_ZBOSS_OSIF_LOG_LEVEL
|
|
CONFIG_ZBOSS_OSIF_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZBOSS_OSIF_LOG_LEVEL_ERR
|
Error |
CONFIG_ZBOSS_OSIF_LOG_LEVEL_INF
|
Info |
CONFIG_ZBOSS_OSIF_LOG_LEVEL_OFF
|
Off |
CONFIG_ZBOSS_OSIF_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZEPHYR_CANOPENNODE_MODULE
|
|
CONFIG_ZEPHYR_HAL_NORDIC_MODULE
|
|
CONFIG_ZEPHYR_LORAMAC_NODE_MODULE
|
|
CONFIG_ZEPHYR_LZ4_MODULE
|
|
CONFIG_ZEPHYR_MBEDTLS_MODULE
|
|
CONFIG_ZEPHYR_NANOPB_MODULE
|
|
CONFIG_ZEPHYR_TENSORFLOW_LITE_MICRO_MODULE
|
|
CONFIG_ZEPHYR_TRACERECORDER_MODULE
|
|
CONFIG_ZEPHYR_TRUSTED_FIRMWARE_M_MODULE
|
|
CONFIG_ZERO_LATENCY_IRQS
|
Enable zero-latency interrupts |
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL
|
|
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL_ERR
|
Error |
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL_INF
|
Info |
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL_OFF
|
Off |
CONFIG_ZIGBEE_APP_UTILS_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZIGBEE_FOTA_LOG_LEVEL
|
|
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_ERR
|
Error |
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_INF
|
Info |
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_OFF
|
Off |
CONFIG_ZIGBEE_FOTA_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL
|
|
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL_ERR
|
Error |
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL_INF
|
Info |
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL_OFF
|
Off |
CONFIG_ZIGBEE_LOGGER_EP_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZIGBEE_SCENES_LOG_LEVEL
|
|
CONFIG_ZIGBEE_SCENES_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZIGBEE_SCENES_LOG_LEVEL_ERR
|
Error |
CONFIG_ZIGBEE_SCENES_LOG_LEVEL_INF
|
Info |
CONFIG_ZIGBEE_SCENES_LOG_LEVEL_OFF
|
Off |
CONFIG_ZIGBEE_SCENES_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZIGBEE_SHELL_LOG_LEVEL
|
|
CONFIG_ZIGBEE_SHELL_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZIGBEE_SHELL_LOG_LEVEL_ERR
|
Error |
CONFIG_ZIGBEE_SHELL_LOG_LEVEL_INF
|
Info |
CONFIG_ZIGBEE_SHELL_LOG_LEVEL_OFF
|
Off |
CONFIG_ZIGBEE_SHELL_LOG_LEVEL_WRN
|
Warning |
CONFIG_ZTEST
|
Zephyr testing framework |
CONFIG_ZTEST_ASSERT_HOOK
|
Using a pre-defined assert handler and hook function |
CONFIG_ZTEST_ASSERT_VERBOSE
|
Assertion verbosity level |
CONFIG_ZTEST_FAIL_FAST
|
Abort on first failing test |
CONFIG_ZTEST_FATAL_HOOK
|
Using a pre-defined fatal handler and hook function |
CONFIG_ZTEST_MOCKING
|
Mocking support functions |
CONFIG_ZTEST_PARAMETER_COUNT
|
Count of parameters or return values reserved |
CONFIG_ZTEST_RETEST_IF_PASSED
|
Reset the board to test again if the test passed |
CONFIG_ZTEST_STACKSIZE
|
Test function thread stack size |
CONFIG_ZTEST_TC_UTIL_USER_OVERRIDE
|
Override tc_util.h |
CONFIG_ZTEST_THREAD_PRIORITY
|
Testing thread priority |
CONFIG_ZZHC_LOG_LEVEL
|
|
CONFIG_ZZHC_LOG_LEVEL_DBG
|
Debug |
CONFIG_ZZHC_LOG_LEVEL_ERR
|
Error |
CONFIG_ZZHC_LOG_LEVEL_INF
|
Info |
CONFIG_ZZHC_LOG_LEVEL_OFF
|
Off |
CONFIG_ZZHC_LOG_LEVEL_WRN
|
Warning |