CONFIG_SOC_MIMXRT1176_CM7¶

SOC_MIMXRT1176_CM7

Type: bool

Direct dependencies¶

<choice: i.MX RT Selection> || <choice: i.MX RT Selection>

(Includes any dependencies from ifs and menus.)

Kconfig definitions¶

At <Zephyr>/soc/arm/nxp_imx/rt/Kconfig.soc:253

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/nxp_imx/Kconfig:14

Menu path: (Top) → Hardware Configuration → i.MX RT Selection

config SOC_MIMXRT1176_CM7
    bool "SOC_MIMXRT1176_CM7"
    select CPU_CORTEX_M7
    select CPU_CORTEX_M_HAS_DWT
    select SOC_SERIES_IMX_RT11XX
    select HAS_MCUX_CACHE
    select HAS_MCUX
    select HAS_MCUX_SEMC
    select HAS_MCUX_CCM_REV2
    select HAS_MCUX_IGPIO
    select HAS_MCUX_LPI2C
    select HAS_MCUX_LPSPI
    select HAS_MCUX_LPADC
    select HAS_MCUX_LPUART
    select HAS_MCUX_GPT
    select HAS_MCUX_FLEXCAN
    select CPU_HAS_ARM_MPU
    select INIT_ARM_PLL
    select INIT_ENET_PLL if NET_L2_ETHERNET
    select INIT_VIDEO_PLL
    select HAS_MCUX_EDMA
    select CPU_HAS_FPU_DOUBLE_PRECISION
    select ADJUST_DCDC
    select BYPASS_LDO_LPSR
    select ADJUST_LDO
    depends on <choice>

At <Zephyr>/soc/arm/nxp_imx/rt/Kconfig.soc:253

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/nxp_imx/Kconfig:14

Menu path: (Top) → Hardware Configuration → i.MX RT Selection

config SOC_MIMXRT1176_CM7
    bool "SOC_MIMXRT1176_CM7"
    select CPU_CORTEX_M7
    select CPU_CORTEX_M_HAS_DWT
    select SOC_SERIES_IMX_RT11XX
    select HAS_MCUX_CACHE
    select HAS_MCUX
    select HAS_MCUX_SEMC
    select HAS_MCUX_CCM_REV2
    select HAS_MCUX_IGPIO
    select HAS_MCUX_LPI2C
    select HAS_MCUX_LPSPI
    select HAS_MCUX_LPADC
    select HAS_MCUX_LPUART
    select HAS_MCUX_GPT
    select HAS_MCUX_FLEXCAN
    select CPU_HAS_ARM_MPU
    select INIT_ARM_PLL
    select INIT_ENET_PLL if NET_L2_ETHERNET
    select INIT_VIDEO_PLL
    select HAS_MCUX_EDMA
    select CPU_HAS_FPU_DOUBLE_PRECISION
    select ADJUST_DCDC
    select BYPASS_LDO_LPSR
    select ADJUST_LDO
    depends on <choice>

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)

CONFIG_SOC_MIMXRT1176_CM7¶

Direct dependencies¶

Symbols selected by this symbol¶

Kconfig definitions¶