CONFIG_SOC_MEC1501_VCI_PINS_AS_GPIOS

Use VCI block pins as GPIOS

Use VCI block pins as GPIOS

Type: bool

Help

By default these pins are not GPIOs, but HW controlled.
Set this if VCI pin block HW logic is not required in the board
design.

Help

By default these pins are not GPIOs, but HW controlled.
Set this if VCI pin block HW logic is not required in the board
design.

Direct dependencies

SOC_FAMILY_MEC || SOC_FAMILY_MEC

(Includes any dependencies from ifs and menus.)

Defaults

• y

• y

Kconfig definitions

At <Zephyr>/soc/arm/microchip_mec/mec1501/Kconfig.soc:72

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/microchip_mec/Kconfig:15

Menu path: (Top) → Hardware Configuration

config SOC_MEC1501_VCI_PINS_AS_GPIOS
    bool "Use VCI block pins as GPIOS"
    default y
    depends on SOC_FAMILY_MEC
    help
      By default these pins are not GPIOs, but HW controlled.
      Set this if VCI pin block HW logic is not required in the board
      design.

---

At <Zephyr>/soc/arm/microchip_mec/mec1501/Kconfig.soc:72

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/microchip_mec/Kconfig:15

Menu path: (Top) → Hardware Configuration

config SOC_MEC1501_VCI_PINS_AS_GPIOS
    bool "Use VCI block pins as GPIOS"
    default y
    depends on SOC_FAMILY_MEC
    help
      By default these pins are not GPIOs, but HW controlled.
      Set this if VCI pin block HW logic is not required in the board
      design.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)