CONFIG_XTAL_SYS_CLK_HZ¶

External oscillator frequency

Type: int

Help¶

Set the external oscillator frequency in Hz. This should be set by the
board's defconfig.

Help¶

Set the external oscillator frequency in Hz. This should be set by the
board's defconfig.

Direct dependencies¶

BOARD_MIMXRT685_EVK || (SOC_SERIES_IMX_RT6XX && SOC_FAMILY_IMX) || (SOC_SERIES_IMX_RT6XX && SOC_FAMILY_IMX)

(Includes any dependencies from ifs and menus.)

Default¶

24000000

Kconfig definitions¶

At <Zephyr>/boards/arm/mimxrt685_evk/Kconfig.defconfig:11

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:22

Menu path: (Top)

config XTAL_SYS_CLK_HZ
    int
    default 24000000
    depends on BOARD_MIMXRT685_EVK

At <Zephyr>/soc/arm/nxp_imx/rt6xx/Kconfig.soc:59

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:15 → <nRF>/doc/_build/kconfig/Kconfig.soc.arch:2 → <Zephyr>/soc/arm/nxp_imx/Kconfig:14

Menu path: (Top) → Hardware Configuration

config XTAL_SYS_CLK_HZ
    int "External oscillator frequency"
    depends on SOC_SERIES_IMX_RT6XX && SOC_FAMILY_IMX
    help
      Set the external oscillator frequency in Hz. This should be set by the
      board's defconfig.

At <Zephyr>/soc/arm/nxp_imx/rt6xx/Kconfig.soc:59

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:36 → <Zephyr>/soc/Kconfig:18 → <Zephyr>/soc/arm/nxp_imx/Kconfig:14

Menu path: (Top) → Hardware Configuration

config XTAL_SYS_CLK_HZ
    int "External oscillator frequency"
    depends on SOC_SERIES_IMX_RT6XX && SOC_FAMILY_IMX
    help
      Set the external oscillator frequency in Hz. This should be set by the
      board's defconfig.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)