NFC: TNEP tag

The TNEP tag sample demonstrates how to use the TNEP for tag device library to exchange data using NFC’s TNEP Protocol on an NFC Tag device.

Overview

The sample uses the Type 4 Tag as the tag transport layer. Initially, the sample creates the initial NDEF message that contains the Services Parameter records and the NDEF records.

If the NFC polling device does not support the TNEP library, it can interact with the NDEF records. If the poller supports the TNEP library, it can select the TNEP Service and exchange data with it.

Every TNEP Tag service has a callback structure that provides information to the application about Service State changes. The sample has two TNEP services defined, each of them containing the NDEF text records.

Requirements

The sample supports the following development kits:

Hardware platforms

PCA

Board name

Build target

nRF5340 DK

PCA10095

nrf5340dk_nrf5340

nrf5340dk_nrf5340_cpuapp

nrf5340dk_nrf5340_cpuappns

nRF52840 DK

PCA10056

nrf52840dk_nrf52840

nrf52840dk_nrf52840

nRF52 DK

PCA10040

nrf52dk_nrf52832

nrf52dk_nrf52832

nRF52833 DK

PCA10010

nrf52833dk_nrf52833

nrf52833dk_nrf52833

User interface

LED 1:

On when the TNEP Tag is initialized.

LED 3:

On when the TNEP service one is selected.

LED 4:

On when the TNEP service two is selected.

Button 1:

Press to provide the application data when the application service two is selected.

Building and running

This sample can be found under samples/nfc/tnep_tag in the nRF Connect SDK folder structure.

See Building and programming a sample application for information about how to build and program the application.

Testing

After programming the sample to your development kit, you can test it with an NFC-A polling device that supports NFC’s Tag NDEF Exchange Protocol.

  1. Connect to the kit with a terminal emulator (for example, PuTTY). See How to connect with PuTTY for the required settings.

  2. Reset the kit.

  3. Touch the NFC antenna with the NFC polling device.

  4. Observe the output in the terminal.

  5. If the NFC polling device selects the service two, you have 27 seconds to press Button 1 to provide application data. If you do not do this, the NFC polling device will deselect the service.

Dependencies

This sample uses the following nRF Connect SDK libraries:

In addition, it uses the following Zephyr libraries:

  • include/sys/until.h