Working with nRF53 Series

Zephyr and the nRF Connect SDK provide support and contain board definitions for developing on the following nRF53 Series devices:

DK	PCA number	Build target/s	Documentation
nRF5340 DK	PCA10095	nrf5340dk/nrf5340/cpuapp, nrf5340dk/nrf5340/cpuapp/ns, nrf5340dk/nrf5340/cpunet	Product Specification User Guide
nRF5340 Audio DK	PCA10121	nrf5340_audio_dk/nrf5340/cpuapp, nrf5340_audio_dk/nrf5340/cpuapp/ns, nrf5340_audio_dk/nrf5340/cpunet	Hardware Specification nRF5340 Audio applications
Thingy:53	PCA20053	thingy53/nrf5340/cpuapp, thingy53/nrf5340/cpuapp/ns, thingy53/nrf5340/cpunet	Hardware Specification

Subpages:

• Features of nRF53 Series
  • Dual-core architecture
  • Enhanced security features
  • Supported protocols
  • Multiprotocol support
• Getting started with nRF5340 DK
  • Minimum requirements
  • Installing the required software
  • Programming the sample
  • Connecting to the sample
  • Testing the sample
  • Next steps
• Developing with nRF5340 DK
  • Introduction
  • Protocols and use cases
  • Multi-image builds
  • Building and programming a sample
  • FOTA updates
  • Simultaneous multi-image DFU
  • MCUboot’s serial recovery of the networking core image
  • Debugging
  • Getting logging output
• Configuring external XIP
  • Enabling configuration options
  • Setting up QSPI flash
  • Setting up static partition manager
  • Configuring linker script
  • Setting up code relocation
  • Flashing the project
  • Troubleshooting
• Getting started with Thingy:53
  • Minimum requirements
  • Installing the required software
  • Getting started with precompiled firmware samples
  • Getting started with machine learning
  • Next steps
• Developing with Thingy:53
  • Connecting to Thingy:53
  • Building and programming from the source code
  • Thingy:53 application guide