FICR programming subcommands
wifi_radio_ficr_prog is the Wi-Fi® radio FICR programming command and it supports the following subcommands.
Wi-Fi radio FICR subcommands
Subcommand |
Register |
Offset |
Argument(s) |
Description |
|---|---|---|---|---|
otp_get_status |
N/A |
N/A |
N/A |
Reads out the OTP status of user region and status of each field (programmed or not). |
otp_read_params |
N/A |
N/A |
N/A |
Reads out all the OTP parameters (excluding QSPI_KEY which cannot be read). |
otp_read_retrim_version |
PRODRETEST.PROGVERSION |
N/A |
N/A |
Reads out program version of Retrim parameters. |
otp_read_retrim_params |
PRODRETEST.TRIM[n] |
N/A |
N/A |
Reads out all the Retrim parameters. |
otp_write_params |
REGION_PROTECT |
0x100 |
arg |
arg = 0x50FA50FA : Enable R/W permission
arg = 0x00000000 : Lock Region from Writing
arg = Others : Invalid
All four REGION_PROTECT registers are written with this 32-bit argument.
|
otp_write_params |
QSPI_KEY |
0x110 |
arg1 arg2 arg3 arg4 |
All four key arguments are 32-bit values forming the required 128-bit (Q)SPI key for encryption.
For example, if QSPI key is “112233445566778899aabbccddeeff00” then arg1=0x44332211 arg2=0x88776655 arg3=0xccbbaa99 arg4=0x00ffeedd
|
otp_write_params |
MAC_ADDRESS0 |
0x120 |
arg1 arg2 |
If MAC address is AA:BB:CC:DD:EE:FF, then arg1=0xDDCCBBAA and arg2=0xFFEE. |
otp_write_params |
MAC_ADDRESS1 |
0x128 |
arg1 arg2 |
If MAC address is AA:BB:CC:DD:EE:FF, then arg1=0xDDCCBBAA and arg2=0xFFEE. |
otp_write_params |
CALIB_XO |
0x130 |
arg |
arg is 7-bit unsigned XO value. Bits [31:7] unused. Adjusts capacitor bank, 0 : Lowest capacitance (Highest frequency), 127 : Highest capacitance (Lowest frequency). |
otp_write_params |
REGION_DEFAULTS |
0x154 |
arg |
Register default enable control.
arg is 32-bit value where a specific bit is set to
0 implies that the corresponding OTP field is programmed. The following list shows the bit and field mapping:bit 0 : QSPI_KEY
bit 1 : MAC0 Address
bit 2 : MAC1 Address
bit 3 : CALIB_XO
bit 4 : Reserved
bit 5 : Reserved
bit 6 : Reserved
bit 7 : Reserved
bit 8 : Reserved
bit 9 : Reserved
bit 10 : Reserved
bit 11 : Reserved
bit 12-31 : Reserved
|
otp_write_retrim_version |
PRODRETEST.PROGVERSION |
N/A |
arg |
arg is 32-bit data. |
otp_write_retrim_params |
PRODRETEST.TRIM[n] |
index between (0-14) |
arg |
arg is 32-bit data. When index = 5, PRODRETEST.TRIM[5] is written with 32-bit argument. |