nRF51 SDK - S210 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Non-volatile memory controller

Driver for the nRF51 NVMC peripheral. More...

Functions

void nrf_nvmc_page_erase (uint32_t address)
 Erase a page in flash. This is required before writing to any address in the page. More...
 
void nrf_nvmc_write_byte (uint32_t address, uint8_t value)
 Write a single byte to flash. More...
 
void nrf_nvmc_write_word (uint32_t address, uint32_t value)
 Write a 32-bit word to flash. More...
 
void nrf_nvmc_write_bytes (uint32_t address, const uint8_t *src, uint32_t num_bytes)
 Write consecutive bytes to flash. More...
 
void nrf_nvmc_write_words (uint32_t address, const uint32_t *src, uint32_t num_words)
 Write consecutive words to flash. More...
 

Detailed Description

Driver for the nRF51 NVMC peripheral.

This driver allows writing to the non-volatile memory (NVM) regions of the nRF51. In order to write to NVM the controller must be powered on and the relevant page must be erased.

Function Documentation

void nrf_nvmc_page_erase ( uint32_t  address)

Erase a page in flash. This is required before writing to any address in the page.

Parameters
addressStart address of the page.
void nrf_nvmc_write_byte ( uint32_t  address,
uint8_t  value 
)

Write a single byte to flash.

The function reads the word containing the byte, and then rewrites the entire word.

Parameters
addressAddress to write to.
valueValue to write.
void nrf_nvmc_write_bytes ( uint32_t  address,
const uint8_t *  src,
uint32_t  num_bytes 
)

Write consecutive bytes to flash.

Parameters
addressAddress to write to.
srcPointer to data to copy from.
num_bytesNumber of bytes in src to write.
void nrf_nvmc_write_word ( uint32_t  address,
uint32_t  value 
)

Write a 32-bit word to flash.

Parameters
addressAddress to write to.
valueValue to write.
void nrf_nvmc_write_words ( uint32_t  address,
const uint32_t *  src,
uint32_t  num_words 
)

Write consecutive words to flash.

Parameters
addressAddress to write to.
srcPointer to data to copy from.
num_wordsNumber of bytes in src to write.