Health Server

The Health Server model provides attention callbacks and node diagnostics for Health Client models. It is primarily used to report faults in the mesh node and map the mesh nodes to their physical location.

Faults

The Health Server model may report a list of faults that have occurred in the device’s lifetime. Typically, the faults are events or conditions that may alter the behavior of the node, like power outages or faulty peripherals. Faults are split into warnings and errors. Warnings indicate conditions that are close to the limits of what the node is designed to withstand, but not necessarily damaging to the device. Errors indicate conditions that are outside of the node’s design limits, and may have caused invalid behavior or permanent damage to the device.

Fault values 0x01 to 0x7f are reserved for the Bluetooth Mesh specification, and the full list of specification defined faults are available in Bluetooth Mesh Health Faults. Fault values 0x80 to 0xff are vendor specific. The list of faults are always reported with a company ID to help interpreting the vendor specific faults.

Attention state

The attention state is used to make the device call attention to itself through some physical behavior like blinking, playing a sound or vibrating. The attention state may be used during provisioning to let the user know which device they’re provisioning, as well as through the Health models at runtime.

The attention state is always assigned a timeout in the range of one to 255 seconds when enabled. The Health Server API provides two callbacks for the application to run their attention calling behavior: bt_mesh_health_srv_cb.attn_on is called at the beginning of the attention period, bt_mesh_health_srv_cb.attn_off is called at the end.

The remaining time for the attention period may be queried through bt_mesh_health_srv.attn_timer.

API reference

group bt_mesh_health_srv

Bluetooth Mesh Health Server Model.

Defines

BT_MESH_HEALTH_PUB_DEFINE(_name, _max_faults)

A helper to define a health publication context

Parameters
  • _name: Name given to the publication context variable.

  • _max_faults: Maximum number of faults the element can have.

BT_MESH_MODEL_HEALTH_SRV(srv, pub)

Define a new health server model. Note that this API needs to be repeated for each element that the application wants to have a health server model on. Each instance also needs a unique bt_mesh_health_srv and bt_mesh_model_pub context.

Return

New mesh model instance.

Parameters

Functions

int bt_mesh_fault_update(struct bt_mesh_elem *elem)

Notify the stack that the fault array state of the given element has changed.

This prompts the Health server on this element to publish the current fault array if periodic publishing is disabled.

Return

0 on success, or (negative) error code otherwise.

Parameters
  • elem: Element to update the fault state of.

struct bt_mesh_health_srv_cb
#include <health_srv.h>

Callback function for the Health Server model

Public Members

int (*fault_get_cur)(struct bt_mesh_model *model, uint8_t *test_id, uint16_t *company_id, uint8_t *faults, uint8_t *fault_count)

Callback for fetching current faults.

Fault values may either be defined by the specification, or by a vendor. Vendor specific faults should be interpreted in the context of the accompanying Company ID. Specification defined faults may be reported for any Company ID, and the same fault may be presented for multiple Company IDs.

All faults shall be associated with at least one Company ID, representing the device vendor or some other vendor whose vendor specific fault values are used.

If there are multiple Company IDs that have active faults, return only the faults associated with one of them at the time. To report faults for multiple Company IDs, interleave which Company ID is reported for each call.

Return

0 on success, or (negative) error code otherwise.

Parameters
  • model: Health Server model instance to get faults of.

  • test_id: Test ID response buffer.

  • company_id: Company ID response buffer.

  • faults: Array to fill with current faults.

  • fault_count: The number of faults the fault array can fit. Should be updated to reflect the number of faults copied into the array.

int (*fault_get_reg)(struct bt_mesh_model *model, uint16_t company_id, uint8_t *test_id, uint8_t *faults, uint8_t *fault_count)

Callback for fetching all registered faults.

Registered faults are all past and current faults since the last call to fault_clear. Only faults associated with the given Company ID should be reported.

Fault values may either be defined by the specification, or by a vendor. Vendor specific faults should be interpreted in the context of the accompanying Company ID. Specification defined faults may be reported for any Company ID, and the same fault may be presented for multiple Company IDs.

Return

0 on success, or (negative) error code otherwise.

Parameters
  • model: Health Server model instance to get faults of.

  • company_id: Company ID to get faults for.

  • test_id: Test ID response buffer.

  • faults: Array to fill with registered faults.

  • fault_count: The number of faults the fault array can fit. Should be updated to reflect the number of faults copied into the array.

int (*fault_clear)(struct bt_mesh_model *model, uint16_t company_id)

Clear all registered faults associated with the given Company ID.

Return

0 on success, or (negative) error code otherwise.

Parameters
  • model: Health Server model instance to clear faults of.

  • company_id: Company ID to clear faults for.

int (*fault_test)(struct bt_mesh_model *model, uint8_t test_id, uint16_t company_id)

Run a self-test.

The Health server may support up to 256 self-tests for each Company ID. The behavior for all test IDs are vendor specific, and should be interpreted based on the accompanying Company ID. Test failures should result in changes to the fault array.

Return

0 if the test execution was started successfully, or (negative) error code otherwise. Note that the fault array will not be reported back to the client if the test execution didn’t start.

Parameters
  • model: Health Server model instance to run test for.

  • test_id: Test ID to run.

  • company_id: Company ID to run test for.

void (*attn_on)(struct bt_mesh_model *model)

Start calling attention to the device.

The attention state is used to map an element address to a physical device. When this callback is called, the device should start some physical procedure meant to call attention to itself, like blinking, buzzing, vibrating or moving. If there are multiple Health server instances on the device, the attention state should also help identify the specific element the server is in.

The attention calling behavior should continue until the attn_off callback is called.

Parameters
  • model: Health Server model to start the attention state of.

void (*attn_off)(struct bt_mesh_model *model)

Stop the attention state.

Any physical activity started to call attention to the device should be stopped.

Parameters
  • model:

struct bt_mesh_health_srv
#include <health_srv.h>

Mesh Health Server Model Context

Public Members

struct bt_mesh_model *model

Composition data model entry pointer.

const struct bt_mesh_health_srv_cb *cb

Optional callback struct

struct k_delayed_work attn_timer

Attention Timer state

Bluetooth Mesh Health Faults

Fault values defined by the Bluetooth Mesh specification.

group bt_mesh_health_faults

List of specification defined Health Fault values.

Defines

BT_MESH_HEALTH_FAULT_NO_FAULT

No fault has occurred.

BT_MESH_HEALTH_FAULT_BATTERY_LOW_WARNING
BT_MESH_HEALTH_FAULT_BATTERY_LOW_ERROR
BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_LOW_WARNING
BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_LOW_ERROR
BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_HIGH_WARNING
BT_MESH_HEALTH_FAULT_SUPPLY_VOLTAGE_TOO_HIGH_ERROR
BT_MESH_HEALTH_FAULT_POWER_SUPPLY_INTERRUPTED_WARNING
BT_MESH_HEALTH_FAULT_POWER_SUPPLY_INTERRUPTED_ERROR
BT_MESH_HEALTH_FAULT_NO_LOAD_WARNING
BT_MESH_HEALTH_FAULT_NO_LOAD_ERROR
BT_MESH_HEALTH_FAULT_OVERLOAD_WARNING
BT_MESH_HEALTH_FAULT_OVERLOAD_ERROR
BT_MESH_HEALTH_FAULT_OVERHEAT_WARNING
BT_MESH_HEALTH_FAULT_OVERHEAT_ERROR
BT_MESH_HEALTH_FAULT_CONDENSATION_WARNING
BT_MESH_HEALTH_FAULT_CONDENSATION_ERROR
BT_MESH_HEALTH_FAULT_VIBRATION_WARNING
BT_MESH_HEALTH_FAULT_VIBRATION_ERROR
BT_MESH_HEALTH_FAULT_CONFIGURATION_WARNING
BT_MESH_HEALTH_FAULT_CONFIGURATION_ERROR
BT_MESH_HEALTH_FAULT_ELEMENT_NOT_CALIBRATED_WARNING
BT_MESH_HEALTH_FAULT_ELEMENT_NOT_CALIBRATED_ERROR
BT_MESH_HEALTH_FAULT_MEMORY_WARNING
BT_MESH_HEALTH_FAULT_MEMORY_ERROR
BT_MESH_HEALTH_FAULT_SELF_TEST_WARNING
BT_MESH_HEALTH_FAULT_SELF_TEST_ERROR
BT_MESH_HEALTH_FAULT_INPUT_TOO_LOW_WARNING
BT_MESH_HEALTH_FAULT_INPUT_TOO_LOW_ERROR
BT_MESH_HEALTH_FAULT_INPUT_TOO_HIGH_WARNING
BT_MESH_HEALTH_FAULT_INPUT_TOO_HIGH_ERROR
BT_MESH_HEALTH_FAULT_INPUT_NO_CHANGE_WARNING
BT_MESH_HEALTH_FAULT_INPUT_NO_CHANGE_ERROR
BT_MESH_HEALTH_FAULT_ACTUATOR_BLOCKED_WARNING
BT_MESH_HEALTH_FAULT_ACTUATOR_BLOCKED_ERROR
BT_MESH_HEALTH_FAULT_HOUSING_OPENED_WARNING
BT_MESH_HEALTH_FAULT_HOUSING_OPENED_ERROR
BT_MESH_HEALTH_FAULT_TAMPER_WARNING
BT_MESH_HEALTH_FAULT_TAMPER_ERROR
BT_MESH_HEALTH_FAULT_DEVICE_MOVED_WARNING
BT_MESH_HEALTH_FAULT_DEVICE_MOVED_ERROR
BT_MESH_HEALTH_FAULT_DEVICE_DROPPED_WARNING
BT_MESH_HEALTH_FAULT_DEVICE_DROPPED_ERROR
BT_MESH_HEALTH_FAULT_OVERFLOW_WARNING
BT_MESH_HEALTH_FAULT_OVERFLOW_ERROR
BT_MESH_HEALTH_FAULT_EMPTY_WARNING
BT_MESH_HEALTH_FAULT_EMPTY_ERROR
BT_MESH_HEALTH_FAULT_INTERNAL_BUS_WARNING
BT_MESH_HEALTH_FAULT_INTERNAL_BUS_ERROR
BT_MESH_HEALTH_FAULT_MECHANISM_JAMMED_WARNING
BT_MESH_HEALTH_FAULT_MECHANISM_JAMMED_ERROR
BT_MESH_HEALTH_FAULT_VENDOR_SPECIFIC_START

Start of the vendor specific fault values.

All values below this are reserved for the Bluetooth Specification.