Logging

The logger API provides a common interface to process messages issued by developers. Messages are passed through a frontend and are then processed by active backends. Custom frontend and backends can be used if needed. Default configuration uses built-in frontend and UART backend.

Summary of logger features:

  • Deferred logging reduces the time needed to log a message by shifting time consuming operations to a known context instead of processing and sending the log message when called.

  • Multiple backends supported (up to 9 backends).

  • Custom frontend supported.

  • Compile time filtering on module level.

  • Run time filtering independent for each backend.

  • Additional run time filtering on module instance level.

  • Timestamping with user provided function.

  • Dedicated API for dumping data.

  • Dedicated API for handling transient strings.

  • Panic support - in panic mode logger switches to blocking, synchronous processing.

  • Printk support - printk message can be redirected to the logger.

  • Design ready for multi-domain/multi-processor system.

Logger API is highly configurable at compile time as well as at run time. Using Kconfig options (see Global Kconfig Options) logs can be gradually removed from compilation to reduce image size and execution time when logs are not needed. During compilation logs can be filtered out on module basis and severity level.

Logs can also be compiled in but filtered on run time using dedicate API. Run time filtering is independent for each backend and each source of log messages. Source of log messages can be a module or specific instance of the module.

There are four severity levels available in the system: error, warning, info and debug. For each severity level the logger API (include/logging/log.h) has set of dedicated macros. Logger API also has macros for logging data.

For each level following set of macros are available:

  • LOG_X for standard printf-like messages, e.g. LOG_ERR.

  • LOG_HEXDUMP_X for dumping data, e.g. LOG_HEXDUMP_WRN.

  • LOG_INST_X for standard printf-like message associated with the particular instance, e.g. LOG_INST_INF.

  • LOG_INST_HEXDUMP_X for dumping data associated with the particular instance, e.g. LOG_HEXDUMP_INST_DBG

There are two configuration categories: configurations per module and global configuration. When logging is enabled globally, it works for modules. However, modules can disable logging locally. Every module can specify its own logging level. The module must define the LOG_LEVEL macro before using the API. Unless a global override is set, the module logging level will be honored. The global override can only increase the logging level. It cannot be used to lower module logging levels that were previously set higher. It is also possible to globally limit logs by providing maximal severity level present in the system, where maximal means lowest severity (e.g. if maximal level in the system is set to info, it means that errors, warnings and info levels are present but debug messages are excluded).

Each module which is using the logger must specify its unique name and register itself to the logger. If module consists of more than one file, registration is performed in one file but each file must define a module name.

Logger’s default frontend is designed to be thread safe and minimizes time needed to log the message. Time consuming operations like string formatting or access to the transport are not performed by default when logger API is called. When logger API is called a message is created and added to the list. Dedicated, configurable pool of log messages is used. There are 2 types of messages: standard and hexdump. Each message contain source ID (module or instance ID and domain ID which might be used for multiprocessor systems), timestamp and severity level. Standard message contains pointer to the string and 32 bit arguments. Hexdump message contains copied data.

Global Kconfig Options

These options can be found in the following path subsys/logging/Kconfig.

CONFIG_LOG: Global switch, turns on/off the logger.

CONFIG_LOG_RUNTIME_FILTERING: Enables runtime reconfiguration of the logger.

CONFIG_LOG_MODE_OVERFLOW: When logger cannot allocate new message oldest one are discarded.

CONFIG_LOG_MODE_NO_OVERFLOW: When logger cannot allocate new message it is discarded.

CONFIG_LOG_BLOCK_IN_THREAD: If enabled and new log message cannot be allocated thread context will block for up to CONFIG_LOG_BLOCK_IN_THREAD_TIMEOUT_MS or until log message is allocated.

CONFIG_LOG_DEFAULT_LEVEL: Default level, sets the logging level used by modules that are not setting their own logging level.

CONFIG_LOG_OVERRIDE_LEVEL: It overrides module logging level when it is not set or set lower than the override value.

CONFIG_LOG_MAX_LEVEL: Maximal (lowest severity) level which is compiled in.

CONFIG_LOG_FUNC_NAME_PREFIX_ERR: Prepend standard ERROR log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_WRN: Prepend standard WARNING log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_INF: Prepend standard INFO log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_FUNC_NAME_PREFIX_DBG: Prepend standard DEBUG log messages with function name. Hexdump messages are not prepended.

CONFIG_LOG_PRINTK: Redirect printk calls to the logger.

CONFIG_LOG_PRINTK_MAX_STRING_LENGTH: Maximal string length that can be processed by printk. Longer strings are trimmed.

CONFIG_LOG_IMMEDIATE: Messages are processed in the context of the log macro call. Note that it can lead to errors when logger is used in the interrupt context.

CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD: When number of buffered log messages reaches the threshold dedicated thread (see log_thread_set()) is waken up. If CONFIG_LOG_PROCESS_THREAD is enabled then this threshold is used by the internal thread.

CONFIG_LOG_PROCESS_THREAD: When enabled, logger is creating own thread which handles log processing.

CONFIG_LOG_BUFFER_SIZE: Number of bytes dedicated for the logger message pool. Single message capable of storing standard log with up to 3 arguments or hexdump message with 12 bytes of data take 32 bytes.

CONFIG_LOG_DETECT_MISSED_STRDUP: Enable detection of missed transient strings handling.

CONFIG_LOG_STRDUP_MAX_STRING: Longest string that can be duplicated using log_strdup().

CONFIG_LOG_STRDUP_BUF_COUNT: Number of buffers in the pool used by log_strdup().

CONFIG_LOG_DOMAIN_ID: Domain ID. Valid in multi-domain systems.

CONFIG_LOG_FRONTEND: Redirect logs to a custom frontend.

CONFIG_LOG_BACKEND_UART: Enabled build-in UART backend.

CONFIG_LOG_BACKEND_SHOW_COLOR: Enables coloring of errors (red) and warnings (yellow).

CONFIG_LOG_BACKEND_FORMAT_TIMESTAMP: If enabled timestamp is formatted to hh:mm:ss:mmm,uuu. Otherwise is printed in raw format.

Usage

Logging in a module

In order to use logger in the module, a unique name of a module must be specified and module must be registered with the logger core using LOG_MODULE_REGISTER. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <logging/log.h>
LOG_MODULE_REGISTER(foo, CONFIG_FOO_LOG_LEVEL);

If the module consists of multiple files, then LOG_MODULE_REGISTER() should appear in exactly one of them. Each other file should use LOG_MODULE_DECLARE to declare its membership in the module. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <logging/log.h>
/* In all files comprising the module but one */
LOG_MODULE_DECLARE(foo, CONFIG_FOO_LOG_LEVEL);

In order to use logger API in a function implemented in a header file LOG_MODULE_DECLARE macro must be used in the function body before logger API is called. Optionally, a compile time log level for the module can be specified as the second parameter. Default log level (CONFIG_LOG_DEFAULT_LEVEL) is used if custom log level is not provided.

#include <logging/log.h>

static inline void foo(void)
{
     LOG_MODULE_DECLARE(foo, CONFIG_FOO_LOG_LEVEL);

     LOG_INF("foo");
}

Dedicated Kconfig template (subsys/logging/Kconfig.template.log_config) can be used to create local log level configuration.

Example below presents usage of the template. As a result CONFIG_FOO_LOG_LEVEL will be generated:

module = FOO
module-str = foo
source "subsys/logging/Kconfig.template.log_config"

Logging in a module instance

In case of modules which are multi-instance and instances are widely used across the system enabling logs will lead to flooding. Logger provide the tools which can be used to provide filtering on instance level rather than module level. In that case logging can be enabled for particular instance.

In order to use instance level filtering following steps must be performed:

  • a pointer to specific logger structure is declared in instance structure. LOG_INSTANCE_PTR_DECLARE is used for that.

#include <logging/log_instance.h>

struct foo_object {
     LOG_INSTANCE_PTR_DECLARE(log);
     uint32_t id;
}
  • module must provide macro for instantiation. In that macro, logger instance is registered and log instance pointer is initialized in the object structure.

#define FOO_OBJECT_DEFINE(_name)                             \
     LOG_INSTANCE_REGISTER(foo, _name, CONFIG_FOO_LOG_LEVEL) \
     struct foo_object _name = {                             \
             LOG_INSTANCE_PTR_INIT(log, foo, _name)          \
     }

Note that when logger is disabled logger instance and pointer to that instance are not created.

In order to use the instance logging API in a source file, a compile-time log level must be set using LOG_LEVEL_SET.

LOG_LEVEL_SET(CONFIG_FOO_LOG_LEVEL);

void foo_init(foo_object *f)
{
     LOG_INST_INF(f->log, "Initialized.");
}

In order to use the instance logging API in a header file, a compile-time log level must be set using LOG_LEVEL_SET.

static inline void foo_init(foo_object *f)
{
     LOG_LEVEL_SET(CONFIG_FOO_LOG_LEVEL);

     LOG_INST_INF(f->log, "Initialized.");
}

Controlling the logger

Logger can be controlled using API defined in include/logging/log_ctrl.h. Logger must be initialized before it can be used. Optionally, user can provide function which returns timestamp value. If not provided, k_cycle_get_32 is used for timestamping. log_process() function is used to trigger processing of one log message (if pending). Function returns true if there is more messages pending.

Following snippet shows how logger can be processed in simple forever loop.

#include <log_ctrl.h>

void main(void)
{
     log_init();

     while (1) {
             if (log_process() == false) {
                     /* sleep */
             }
     }
}

Logger controlling API contains also functions for run time reconfiguration of the logger. If run time filtering is enabled the log_filter_set() can be used to change maximal severity level for given module. Module is identified by source ID and domain ID. Source ID can be retrieved if source name is known by iterating through all registered sources.

If logger is processed from a thread then it is possible to enable a feature which will wake up processing thread when certain amount of log messages are buffered (see CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD). It is also possible to enable internal logger thread (see CONFIG_LOG_PROCESS_THREAD). In that case logger thread is initialized and log messages are processed implicitly.

Logger panic

In case of error condition system usually can no longer rely on scheduler or interrupts. In that situation deferred log message processing is not an option. Logger controlling API provides a function for entering into panic mode (log_panic()) which should be called in such situation.

When log_panic() is called, logger sends _panic_ notification to all active backends. It is backend responsibility to react. Backend should switch to blocking, synchronous mode (stop using interrupts) or disable itself. Once all backends are notified, logger flushes all buffered messages. Since that moment all logs are processed in a blocking way.

Architecture

Logger consists of 3 main parts:

  • Frontend

  • Core

  • Backends

Log message is generated by a source of logging which can be a module or instance of a module.

Default Frontend

Default frontend is engaged when logger API is called in a source of logging (e.g. LOG_INF) and is responsible for filtering a message (compile and run time), allocating buffer for the message, creating the message and putting that message into the list of pending messages. Since logger API can be called in an interrupt, frontend is optimized to log the message as fast as possible. Each log message consists of one or more fixed size chunks. Message head chunk contains log entry details like: source ID, timestamp, severity level and the data (string pointer and arguments or raw data). Message contains also a reference counter which indicates how many users still uses this message. It is used to return message to the pool once last user indicates that it can be freed. If more than 3 arguments or 12 bytes of raw data is used in the log then log message is formed from multiple chunks which are linked together.

It may happen that frontend cannot allocate message. It happens if system is generating more log messages than it can process in certain time frame. There are two strategies to handle that case:

  • Overflow - oldest pending messages are freed, before backends process them, until new message can be allocated.

  • No overflow - new log is dropped if message cannot be allocated.

Second option is simpler however in many case less welcomed. On the other hand, handling overflows degrades performance of the logger since allocating a message requires freeing other messages which degrades logger performance. It is thus recommended to avoid such cases by increasing logger buffer or filtering out logs.

If run-time filtering is enabled, then for each source of logging a filter structure in RAM is declared. Such filter is using 32 bits divided into ten 3 bit slots. Except slot 0, each slot stores current filter for one backend in the system. Slot 0 (bits 0-2) is used to aggregate maximal filter setting for given source of logging. Aggregate slot determines if log message is created for given entry since it indicates if there is at least one backend expecting that log entry. Backend slots are examined when message is process by the logger core to determine if message is accepted by given backend.

In the example below backend 1 is set to receive errors (slot 1) and backend 2 up to info level (slot 2). Slots 3-9 are not used. Aggregated filter (slot 0) is set to info level and up to this level message from that particular source will be buffered.

slot 0

slot 1

slot 2

slot 3

slot 9

INF

ERR

INF

OFF

OFF

Custom Frontend

Custom frontend is enabled using CONFIG_LOG_FRONTEND. Logs are redirected to functions declared in include/logging/log_frontend.h. This may be required in very time-sensitive cases, but this hurts logger functionality. All features from default frontend, core and all backends are not used.

Core

When log processing is triggered, a message is removed from the list of pending messages. If runtime filtering is disabled, the message is passed to all active backends, otherwise the message is passed to only those backends that have requested messages from that particular source (based on the source ID in the message), and severity level. Once all backends are iterated, the message is considered processed by the logger, but the message may still be in use by a backend.

Logging strings

Logger stores the address of a log message string argument passed to it. Because a string variable argument could be transient, allocated on the stack, or modifiable, logger provides a mechanism and a dedicated buffer pool to hold copies of strings. The buffer size and count is configurable (see CONFIG_LOG_STRDUP_MAX_STRING and CONFIG_LOG_STRDUP_BUF_COUNT).

If a string argument is transient, the user must call log_strdup() to duplicate the passed string into a buffer from the pool. See the examples below. If a strdup buffer cannot be allocated, a warning message is logged and an error code returned indicating CONFIG_LOG_STRDUP_BUF_COUNT should be increased. Buffers are freed together with the log message.

char local_str[] = "abc";

LOG_INF("logging transient string: %s", log_strdup(local_str));
local_str[0] = '\0'; /* String can be modified, logger will use duplicate."

When CONFIG_LOG_DETECT_MISSED_STRDUP is enabled logger will scan each log message and report if string format specifier is found and string address is not in read only memory section or does not belong to memory pool dedicated to string duplicates. It indictes that log_strdup() is missing in a call to log a message, such as LOG_INF.

Logger backends

Logger supports up to 9 concurrent backends. Logger backend interface consists of two functions:

  • log_backend_put() - backend gets log message.

  • log_backend_panic() - on that call backend is notified that it must switch to panic (synchronous) mode. If backend cannot support synchronous, interrupt-less operation (e.g. network) it should stop any processing.

The log message contains a reference counter tracking how many backends are processing the message. On receiving a message backend must claim it by calling log_msg_get() on that message which increments a reference counter. Once message is processed, backend puts back the message (log_msg_put()) decrementing a reference counter. On last log_msg_put(), when reference counter reaches 0, message is returned to the pool. It is up to the backend how message is processed. If backend intends to format message into the string, helper function for that are available in include/logging/log_output.h.

Example message formatted using log_output_msg_process().

[00:00:00.000,274] <info> sample_instance.inst1: logging message

Note

The message pool can be starved if a backend does not call log_msg_put() when it is done processing a message. The logger core has no means to force messages back to the pool if they’re still marked as in use (with a non-zero reference counter).

#include <log_backend.h>

void put(const struct log_backend *const backend,
         struct log_msg *msg)
{
     log_msg_get(msg);

     /* message processing */

     log_msg_put(msg);
}

Logger backends are registered to the logger using LOG_BACKEND_DEFINE macro. The macro creates an instance in the dedicated memory section. Backends can be dynamically enabled (log_backend_enable()) and disabled.

Limitations

The Logger architecture has the following limitations:

  • Strings as arguments (%s) require special treatment (see Logging strings).

  • Logging double floating point variables is not possible because arguments are 32 bit values.

  • Number of arguments in the string is limited to 9.

API Reference

Logger API

group log_api

Logger API.

Defines

LOG_ERR(...)

Writes an ERROR level message to the log.

It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_WRN(...)

Writes a WARNING level message to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INF(...)

Writes an INFO level message to the log.

It’s meant to write generic user oriented messages.

Parameters
  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_DBG(...)

Writes a DEBUG level message to the log.

It’s meant to write developer oriented information.

Parameters
  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_ERR(_log_inst, ...)

Writes an ERROR level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_WRN(_log_inst, ...)

Writes a WARNING level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_INF(_log_inst, ...)

Writes an INFO level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to write generic user oriented messages.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_INST_DBG(_log_inst, ...)

Writes a DEBUG level message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to write developer oriented information.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • ...: A string optionally containing printk valid conversion specifier, followed by as many values as specifiers.

LOG_HEXDUMP_ERR(_data, _length, _str)

Writes an ERROR level hexdump message to the log.

It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_HEXDUMP_WRN(_data, _length, _str)

Writes a WARNING level message to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_HEXDUMP_INF(_data, _length, _str)

Writes an INFO level message to the log.

It’s meant to write generic user oriented messages.

Parameters
  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_HEXDUMP_DBG(_data, _length, _str)

Writes a DEBUG level message to the log.

It’s meant to write developer oriented information.

Parameters
  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_INST_HEXDUMP_ERR(_log_inst, _data, _length, _str)

Writes an ERROR hexdump message associated with the instance to the log.

Message is associated with specific instance of the module which has independent filtering settings (if runtime filtering is enabled) and message prefix (<module_name>.<instance_name>). It’s meant to report severe errors, such as those from which it’s not possible to recover.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_INST_HEXDUMP_WRN(_log_inst, _data, _length, _str)

Writes a WARNING level hexdump message associated with the instance to the log.

It’s meant to register messages related to unusual situations that are not necessarily errors.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_INST_HEXDUMP_INF(_log_inst, _data, _length, _str)

Writes an INFO level hexdump message associated with the instance to the log.

It’s meant to write generic user oriented messages.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_INST_HEXDUMP_DBG(_log_inst, _data, _length, _str)

Writes a DEBUG level hexdump message associated with the instance to the log.

It’s meant to write developer oriented information.

Parameters
  • _log_inst: Pointer to the log structure associated with the instance.

  • _data: Pointer to the data to be logged.

  • _length: Length of data (in bytes).

  • _str: Persistent, raw string.

LOG_MODULE_REGISTER(...)

Create module-specific state and register the module with Logger.

This macro normally must be used after including <logging/log.h> to complete the initialization of the module.

Module registration can be skipped in two cases:

  • The module consists of more than one file, and another file invokes this macro. (LOG_MODULE_DECLARE() should be used instead in all of the module’s other files.)

  • Instance logging is used and there is no need to create module entry. In that case LOG_LEVEL_SET() should be used to set log level used within the file.

Macro accepts one or two parameters:

  • module name

  • optional log level. If not provided then default log level is used in the file.

Example usage:

Note

The module’s state is defined, and the module is registered, only if LOG_LEVEL for the current source file is non-zero or it is not defined and CONFIG_LOG_DEFAULT_LEVEL is non-zero. In other cases, this macro has no effect.

See

LOG_MODULE_DECLARE

LOG_MODULE_DECLARE(...)

Macro for declaring a log module (not registering it).

Modules which are split up over multiple files must have exactly one file use LOG_MODULE_REGISTER() to create module-specific state and register the module with the logger core.

The other files in the module should use this macro instead to declare that same state. (Otherwise, LOG_INF() etc. will not be able to refer to module-specific state variables.)

Macro accepts one or two parameters:

  • module name

  • optional log level. If not provided then default log level is used in the file.

Example usage:

Note

The module’s state is declared only if LOG_LEVEL for the current source file is non-zero or it is not defined and CONFIG_LOG_DEFAULT_LEVEL is non-zero. In other cases, this macro has no effect.

See

LOG_MODULE_REGISTER

LOG_LEVEL_SET(level)

Macro for setting log level in the file or function where instance logging API is used.

Parameters
  • level: Level used in file or in function.

Functions

void log_printk(const char *fmt, va_list ap)

Writes an formatted string to the log.

Conditionally compiled (see CONFIG_LOG_PRINTK). Function provides printk functionality. It is inefficient compared to standard logging because string formatting is performed in the call context and not deferred to the log processing context (log_process).

Parameters
  • fmt: Formatted string to output.

  • ap: Variable parameters.

char *log_strdup(const char *str)

Copy transient string to a buffer from internal, logger pool.

Function should be used when transient string is intended to be logged. Logger allocates a buffer and copies input string returning a pointer to the copy. Logger ensures that buffer is freed when logger message is freed.

Depending on configuration, this function may do nothing and just pass along the supplied string pointer. Do not rely on this function to always make a copy!

Return

Copy of the string or default string if buffer could not be allocated. String may be truncated if input string does not fit in a buffer from the pool (see CONFIG_LOG_STRDUP_MAX_STRING). In some configurations, the original string pointer is returned.

Parameters
  • str: Transient string.

Logger control

group log_ctrl

Logger control API.

Defines

LOG_CORE_INIT()
LOG_INIT()
LOG_PANIC()
LOG_PROCESS()

Typedefs

typedef uint32_t (*timestamp_get_t)(void)

Functions

void log_core_init(void)

Function system initialization of the logger.

Function is called during start up to allow logging before user can explicitly initialize the logger.

void log_init(void)

Function for user initialization of the logger.

void log_thread_set(k_tid_t process_tid)

Function for providing thread which is processing logs.

See CONFIG_LOG_PROCESS_TRIGGER_THRESHOLD.

Note

Function has asserts and has no effect when CONFIG_LOG_PROCESS_THREAD is set.

Parameters
  • process_tid: Process thread id. Used to wake up the thread.

int log_set_timestamp_func(timestamp_get_t timestamp_getter, uint32_t freq)

Function for providing timestamp function.

Return

0 on success or error.

Parameters
  • timestamp_getter: Timestamp function.

  • freq: Timestamping frequency.

void log_panic(void)

Switch the logger subsystem to the panic mode.

Returns immediately if the logger is already in the panic mode.

On panic the logger subsystem informs all backends about panic mode. Backends must switch to blocking mode or halt. All pending logs are flushed after switching to panic mode. In panic mode, all log messages must be processed in the context of the call.

bool log_process(bool bypass)

Process one pending log message.

Parameters
  • bypass: If true message is released without being processed.

Return Value
  • true: There is more messages pending to be processed.

  • false: No messages pending.

uint32_t log_buffered_cnt(void)

Return number of buffered log messages.

Return

Number of currently buffered log messages.

uint32_t log_src_cnt_get(uint32_t domain_id)

Get number of independent logger sources (modules and instances)

Return

Number of sources.

Parameters
  • domain_id: Domain ID.

const char *log_source_name_get(uint32_t domain_id, uint32_t src_id)

Get name of the source (module or instance).

Return

Source name or NULL if invalid arguments.

Parameters
  • domain_id: Domain ID.

  • src_id: Source ID.

const char *log_domain_name_get(uint32_t domain_id)

Get name of the domain.

Return

Domain name.

Parameters
  • domain_id: Domain ID.

uint32_t log_filter_get(struct log_backend const *const backend, uint32_t domain_id, uint32_t src_id, bool runtime)

Get source filter for the provided backend.

Return

Severity level.

Parameters
  • backend: Backend instance.

  • domain_id: ID of the domain.

  • src_id: Source (module or instance) ID.

  • runtime: True for runtime filter or false for compiled in.

uint32_t log_filter_set(struct log_backend const *const backend, uint32_t domain_id, uint32_t src_id, uint32_t level)

Set filter on given source for the provided backend.

Return

Actual level set which may be limited by compiled level. If filter was set for all backends then maximal level that was set is returned.

Parameters
  • backend: Backend instance. NULL for all backends.

  • domain_id: ID of the domain.

  • src_id: Source (module or instance) ID.

  • level: Severity level.

void log_backend_enable(struct log_backend const *const backend, void *ctx, uint32_t level)

Enable backend with initial maximum filtering level.

Parameters
  • backend: Backend instance.

  • ctx: User context.

  • level: Severity level.

void log_backend_disable(struct log_backend const *const backend)

Disable backend.

Parameters
  • backend: Backend instance.

Log message

group log_msg

Log message API.

Defines

LOG_MAX_NARGS

Maximum number of arguments in the standard log entry.

It is limited by 4 bit nargs field in the log message.

LOG_MSG_NARGS_SINGLE_CHUNK

Number of arguments in the log entry which fits in one chunk.

LOG_MSG_NARGS_HEAD_CHUNK

Number of arguments in the head of extended standard log message..

LOG_MSG_HEXDUMP_BYTES_SINGLE_CHUNK

Maximal amount of bytes in the hexdump entry which fits in one chunk.

LOG_MSG_HEXDUMP_BYTES_HEAD_CHUNK

Number of bytes in the first chunk of hexdump message if message consists of more than one chunk.

HEXDUMP_BYTES_CONT_MSG

Number of bytes that can be stored in chunks following head chunk in hexdump log message.

ARGS_CONT_MSG
LOG_MSG_TYPE_STD

Flag indicating standard log message.

LOG_MSG_TYPE_HEXDUMP

Flag indicating hexdump log message.

COMMON_PARAM_HDR()

Common part of log message header.

LOG_MSG_HEXDUMP_LENGTH_BITS

Number of bits used for storing length of hexdump log message.

LOG_MSG_HEXDUMP_MAX_LENGTH

Maximum length of log hexdump message.

Typedefs

typedef unsigned long log_arg_t

Log argument type.

Should preferably be equivalent to a native word size.

Functions

void log_msg_pool_init(void)

Function for initialization of the log message pool.

void log_msg_get(struct log_msg *msg)

Function for indicating that message is in use.

Message can be used (read) by multiple users. Internal reference counter is atomically increased. See log_msg_put.

Parameters
  • msg: Message.

void log_msg_put(struct log_msg *msg)

Function for indicating that message is no longer in use.

Internal reference counter is atomically decreased. If reference counter equals 0 message is freed.

Parameters
  • msg: Message.

static inline uint32_t log_msg_domain_id_get(struct log_msg *msg)

Get domain ID of the message.

Return

Domain ID.

Parameters
  • msg: Message

static inline uint32_t log_msg_source_id_get(struct log_msg *msg)

Get source ID (module or instance) of the message.

Return

Source ID.

Parameters
  • msg: Message

static inline uint32_t log_msg_level_get(struct log_msg *msg)

Get severity level of the message.

Return

Severity message.

Parameters
  • msg: Message

static inline uint32_t log_msg_timestamp_get(struct log_msg *msg)

Get timestamp of the message.

Return

Timestamp value.

Parameters
  • msg: Message

static inline bool log_msg_is_std(struct log_msg *msg)

Check if message is of standard type.

Parameters
  • msg: Message

Return Value
  • true: Standard message.

  • false: Hexdump message.

uint32_t log_msg_nargs_get(struct log_msg *msg)

Returns number of arguments in standard log message.

Return

Number of arguments.

Parameters
  • msg: Standard log message.

log_arg_t log_msg_arg_get(struct log_msg *msg, uint32_t arg_idx)

Gets argument from standard log message.

Return

Argument value or 0 if arg_idx exceeds number of arguments in the message.

Parameters
  • msg: Standard log message.

  • arg_idx: Argument index.

const char *log_msg_str_get(struct log_msg *msg)

Gets pointer to the unformatted string from standard log message.

Return

Pointer to the string.

Parameters
  • msg: Standard log message.

struct log_msg *log_msg_hexdump_create(const char *str, const uint8_t *data, uint32_t length)

Allocates chunks for hexdump message and copies the data.

Function resets header and sets following fields:

  • message type

  • length

Note

Allocation and partial filling is combined for performance reasons.

Return

Pointer to allocated head of the message or NULL

Parameters
  • str: String.

  • data: Data.

  • length: Data length.

void log_msg_hexdump_data_put(struct log_msg *msg, uint8_t *data, size_t *length, size_t offset)

Put data into hexdump log message.

Parameters
  • [in] msg: Message.

  • [in] data: Data to be copied.

  • [inout] length: Input: requested amount. Output: actual amount.

  • [in] offset: Offset.

void log_msg_hexdump_data_get(struct log_msg *msg, uint8_t *data, size_t *length, size_t offset)

Get data from hexdump log message.

Parameters
  • [in] msg: Message.

  • [in] data: Buffer for data.

  • [inout] length: Input: requested amount. Output: actual amount.

  • [in] offset: Offset.

union log_msg_chunk *log_msg_no_space_handle(void)
union log_msg_chunk *log_msg_chunk_alloc(void)

Allocate single chunk from the pool.

Return

Pointer to the allocated chunk or NULL if failed to allocate.

static inline struct log_msg *log_msg_create_0(const char *str)

Create standard log message with no arguments.

Function resets header and sets following fields:

  • message type

  • string pointer

Return

Pointer to allocated head of the message or NULL.

static inline struct log_msg *log_msg_create_1(const char *str, log_arg_t arg1)

Create standard log message with one argument.

Function resets header and sets following fields:

  • message type

  • string pointer

  • number of arguments

  • argument

Return

Pointer to allocated head of the message or NULL.

Parameters
  • str: String.

  • arg1: Argument.

static inline struct log_msg *log_msg_create_2(const char *str, log_arg_t arg1, log_arg_t arg2)

Create standard log message with two arguments.

Function resets header and sets following fields:

  • message type

  • string pointer

  • number of arguments

  • arguments

Return

Pointer to allocated head of the message or NULL.

Parameters
  • str: String.

  • arg1: Argument 1.

  • arg2: Argument 2.

static inline struct log_msg *log_msg_create_3(const char *str, log_arg_t arg1, log_arg_t arg2, log_arg_t arg3)

Create standard log message with three arguments.

Function resets header and sets following fields:

  • message type

  • string pointer

  • number of arguments

  • arguments

Return

Pointer to allocated head of the message or NULL.

Parameters
  • str: String.

  • arg1: Argument 1.

  • arg2: Argument 2.

  • arg3: Argument 3.

struct log_msg *log_msg_create_n(const char *str, log_arg_t *args, uint32_t nargs)

Create standard log message with variable number of arguments.

Function resets header and sets following fields:

  • message type

  • string pointer

  • number of arguments

  • arguments

Return

Pointer to allocated head of the message or NULL.

Parameters
  • str: String.

  • args: Array with arguments.

  • nargs: Number of arguments.

struct log_msg_ids
#include <log_msg.h>

Part of log message header identifying source and level.

struct log_msg_generic_hdr
#include <log_msg.h>

Part of log message header common to standard and hexdump log message.

struct log_msg_std_hdr
#include <log_msg.h>

Part of log message header specific to standard log message.

struct log_msg_hexdump_hdr
#include <log_msg.h>

Part of log message header specific to hexdump log message.

struct log_msg_hdr
#include <log_msg.h>

Log message header structure

union log_msg_head_data
#include <log_msg.h>

Data part of log message.

Public Members

log_arg_t args[3U]
uint8_t bytes[(3U * sizeof(log_arg_t))]
struct log_msg_ext_head_data
#include <log_msg.h>

Data part of extended log message.

struct log_msg
#include <log_msg.h>

Log message structure.

struct log_msg_cont
#include <log_msg.h>

Chunks following message head when message is extended.

union log_msg_chunk
#include <log_msg.h>

Log message.

Public Members

struct log_msg head
struct log_msg_cont cont

Logger backend interface

group log_backend

Logger backend interface.

Defines

LOG_BACKEND_DEFINE(_name, _api, _autostart)

Macro for creating a logger backend instance.

Parameters
  • _name: Name of the backend instance.

  • _api: Logger backend API.

  • _autostart: If true backend is initialized and activated together with the logger subsystem.

Functions

static inline void log_backend_put(const struct log_backend *const backend, struct log_msg *msg)

Put message with log entry to the backend.

Parameters
  • [in] backend: Pointer to the backend instance.

  • [in] msg: Pointer to message with log entry.

static inline void log_backend_put_sync_string(const struct log_backend *const backend, struct log_msg_ids src_level, uint32_t timestamp, const char *fmt, va_list ap)

Synchronously process log message.

Parameters
  • [in] backend: Pointer to the backend instance.

  • [in] src_level: Message details.

  • [in] timestamp: Timestamp.

  • [in] fmt: Log string.

  • [in] ap: Log string arguments.

static inline void log_backend_put_sync_hexdump(const struct log_backend *const backend, struct log_msg_ids src_level, uint32_t timestamp, const char *metadata, const uint8_t *data, uint32_t len)

Synchronously process log hexdump_message.

Parameters
  • [in] backend: Pointer to the backend instance.

  • [in] src_level: Message details.

  • [in] timestamp: Timestamp.

  • [in] metadata: Raw string associated with the data.

  • [in] data: Data.

  • [in] len: Data length.

static inline void log_backend_dropped(const struct log_backend *const backend, uint32_t cnt)

Notify backend about dropped log messages.

Function is optional.

Parameters
  • [in] backend: Pointer to the backend instance.

  • [in] cnt: Number of dropped logs since last notification.

static inline void log_backend_panic(const struct log_backend *const backend)

Reconfigure backend to panic mode.

Parameters
  • [in] backend: Pointer to the backend instance.

static inline void log_backend_id_set(const struct log_backend *const backend, uint8_t id)

Set backend id.

Note

It is used internally by the logger.

Parameters
  • backend: Pointer to the backend instance.

  • id: ID.

static inline uint8_t log_backend_id_get(const struct log_backend *const backend)

Get backend id.

Note

It is used internally by the logger.

Return

Id.

Parameters
  • [in] backend: Pointer to the backend instance.

static inline const struct log_backend *log_backend_get(uint32_t idx)

Get backend.

Return

Pointer to the backend instance.

Parameters
  • [in] idx: Pointer to the backend instance.

static inline int log_backend_count_get(void)

Get number of backends.

Return

Number of backends.

static inline void log_backend_activate(const struct log_backend *const backend, void *ctx)

Activate backend.

Parameters
  • [in] backend: Pointer to the backend instance.

  • [in] ctx: User context.

static inline void log_backend_deactivate(const struct log_backend *const backend)

Deactivate backend.

Parameters
  • [in] backend: Pointer to the backend instance.

static inline bool log_backend_is_active(const struct log_backend *const backend)

Check state of the backend.

Return

True if backend is active, false otherwise.

Parameters
  • [in] backend: Pointer to the backend instance.

struct log_backend_api
#include <log_backend.h>

Logger backend API.

struct log_backend_control_block
#include <log_backend.h>

Logger backend control block.

struct log_backend
#include <log_backend.h>

Logger backend structure.

Logger output formatting

group log_output

Log output API.

Defines

LOG_OUTPUT_FLAG_COLORS

Flag forcing ANSI escape code colors, red (errors), yellow (warnings).

LOG_OUTPUT_FLAG_TIMESTAMP

Flag forcing timestamp.

LOG_OUTPUT_FLAG_FORMAT_TIMESTAMP

Flag forcing timestamp formatting.

LOG_OUTPUT_FLAG_LEVEL

Flag forcing severity level prefix.

LOG_OUTPUT_FLAG_CRLF_NONE

Flag preventing the logger from adding CR and LF characters.

LOG_OUTPUT_FLAG_CRLF_LFONLY

Flag forcing a single LF character for line breaks.

LOG_OUTPUT_FLAG_FORMAT_SYSLOG

Flag forcing syslog format specified in RFC 5424.

LOG_OUTPUT_FLAG_FORMAT_SYST

Flag forcing syslog format specified in mipi sys-t.

LOG_OUTPUT_DEFINE(_name, _func, _buf, _size)

Create log_output instance.

Parameters
  • _name: Instance name.

  • _func: Function for processing output data.

  • _buf: Pointer to the output buffer.

  • _size: Size of the output buffer.

Typedefs

typedef int (*log_output_func_t)(uint8_t *buf, size_t size, void *ctx)

Prototype of the function processing output data.

Return

Number of bytes processed, dropped or discarded.

Note

If the log output function cannot process all of the data, it is its responsibility to mark them as dropped or discarded by returning the corresponding number of bytes dropped or discarded to the caller.

Parameters
  • buf: The buffer data.

  • size: The buffer size.

  • ctx: User context.

Functions

void log_output_msg_process(const struct log_output *log_output, struct log_msg *msg, uint32_t flags)

Process log messages to readable strings.

Function is using provided context with the buffer and output function to process formatted string and output the data.

Parameters
  • log_output: Pointer to the log output instance.

  • msg: Log message.

  • flags: Optional flags.

void log_output_string(const struct log_output *log_output, struct log_msg_ids src_level, uint32_t timestamp, const char *fmt, va_list ap, uint32_t flags)

Process log string.

Function is formatting provided string adding optional prefixes and postfixes.

Parameters
  • log_output: Pointer to log_output instance.

  • src_level: Log source and level structure.

  • timestamp: Timestamp.

  • fmt: String.

  • ap: String arguments.

  • flags: Optional flags.

void log_output_hexdump(const struct log_output *log_output, struct log_msg_ids src_level, uint32_t timestamp, const char *metadata, const uint8_t *data, uint32_t length, uint32_t flags)

Process log hexdump.

Function is formatting provided hexdump adding optional prefixes and postfixes.

Parameters
  • log_output: Pointer to log_output instance.

  • src_level: Log source and level structure.

  • timestamp: Timestamp.

  • metadata: String.

  • data: Data.

  • length: Data length.

  • flags: Optional flags.

void log_output_dropped_process(const struct log_output *log_output, uint32_t cnt)

Process dropped messages indication.

Function prints error message indicating lost log messages.

Parameters
  • log_output: Pointer to the log output instance.

  • cnt: Number of dropped messages.

void log_output_flush(const struct log_output *log_output)

Flush output buffer.

Parameters

static inline void log_output_ctx_set(const struct log_output *log_output, void *ctx)

Function for setting user context passed to the output function.

Parameters
  • log_output: Pointer to the log output instance.

  • ctx: User context.

static inline void log_output_hostname_set(const struct log_output *log_output, const char *hostname)

Function for setting hostname of this device.

Parameters
  • log_output: Pointer to the log output instance.

  • hostname: Hostname of this device

void log_output_timestamp_freq_set(uint32_t freq)

Set timestamp frequency.

Parameters
  • freq: Frequency in Hz.

struct log_output_control_block
#include <log_output.h>
struct log_output
#include <log_output.h>

Log_output instance structure.