Qomu

Overview

The Qomu board is a platform with an on-board QuickLogic EOS S3 Sensor Processing Platform.

Qomu

Fig. 160 Qomu (Credit: QuickLogic)

Hardware

  • QuickLogic EOS S3 MCU Platform

  • 16 Mbit of on-board flash memory

  • Touchpads (4)

  • RGB LED

  • Powered from USB

Detailed information about the board can be found in a Qomu repository 1 and Qomu User Guide 2.

Connections and IOs

Detailed information about pinouts is available in the schematics document 3.

Programming

The Qomu platform by default boots from flash.

Below are steps to run Qomu sample application:

  1. Build the sample in an usual way:

    # From the root of the zephyr repository
    west build -b qomu samples/boards/qomu
    
  2. Remove Qomu board from USB port.

  3. Insert Qomu board to USB port.

  4. While the blue LED is blinking (for 5 seconds), touch the touch-pads with your finger. On success, the green led will start flashing.

  5. Use TinyFpgaProgrammer application to load the target application:

    python3 /path/to/TinyFPGA-Programmer-Application/tinyfpga-programmer-gui.py --mode m4 --m4app build/zephyr/zephyr.bin --reset
    

    Refer to TinyFPGA Programmer Application repo 4 for detailed information on installation and program usage.

References

1

https://github.com/QuickLogic-Corp/qomu-dev-board

2

https://github.com/QuickLogic-Corp/qomu-dev-board/blob/master/doc/Qomu_UserGuide.pdf

3

https://github.com/QuickLogic-Corp/qomu-dev-board/blob/master/doc/qomu-board.pdf

4

https://github.com/QuickLogic-Corp/TinyFPGA-Programmer-Application