Zephyr API Documentation  3.6.99
A Scalable Open Source RTOS
Loading...
Searching...
No Matches
gic.h File Reference

Driver for ARM Generic Interrupt Controller. More...

#include <zephyr/types.h>
#include <zephyr/device.h>

Go to the source code of this file.

Macros

#define GIC_DIST_BASE   DT_REG_ADDR_BY_IDX(DT_INST(0, arm_gic), 0)
 
#define GIC_CPU_BASE   DT_REG_ADDR_BY_IDX(DT_INST(0, arm_gic), 1)
 
#define GICD_CTLR   (GIC_DIST_BASE + 0x0)
 
#define GICD_TYPER   (GIC_DIST_BASE + 0x4)
 
#define GICD_IIDR   (GIC_DIST_BASE + 0x8)
 
#define GICD_IGROUPRn   (GIC_DIST_BASE + 0x80)
 
#define GICD_ISENABLERn   (GIC_DIST_BASE + 0x100)
 
#define GICD_ICENABLERn   (GIC_DIST_BASE + 0x180)
 
#define GICD_ISPENDRn   (GIC_DIST_BASE + 0x200)
 
#define GICD_ICPENDRn   (GIC_DIST_BASE + 0x280)
 
#define GICD_ISACTIVERn   (GIC_DIST_BASE + 0x300)
 
#define GICD_IPRIORITYRn   (GIC_DIST_BASE + 0x400)
 
#define GICD_ITARGETSRn   (GIC_DIST_BASE + 0x800)
 
#define GICD_ICFGRn   (GIC_DIST_BASE + 0xc00)
 
#define GICD_SGIR   (GIC_DIST_BASE + 0xf00)
 
#define GICC_CTLR   (GIC_CPU_BASE + 0x0)
 
#define GICC_PMR   (GIC_CPU_BASE + 0x4)
 
#define GICC_BPR   (GIC_CPU_BASE + 0x8)
 
#define GICC_IAR   (GIC_CPU_BASE + 0xc)
 
#define GICC_EOIR   (GIC_CPU_BASE + 0x10)
 
#define GICC_CTLR_ENABLEGRP0   BIT(0)
 
#define GICC_CTLR_ENABLEGRP1   BIT(1)
 
#define GICC_CTLR_ENABLE_MASK   (GICC_CTLR_ENABLEGRP0 | GICC_CTLR_ENABLEGRP1)
 
#define GICD_SGIR_TGTFILT(x)   ((x) << 24)
 
#define GICD_SGIR_TGTFILT_CPULIST   GICD_SGIR_TGTFILT(0b00)
 
#define GICD_SGIR_TGTFILT_ALLBUTREQ   GICD_SGIR_TGTFILT(0b01)
 
#define GICD_SGIR_TGTFILT_REQONLY   GICD_SGIR_TGTFILT(0b10)
 
#define GICD_SGIR_CPULIST(x)   ((x) << 16)
 
#define GICD_SGIR_CPULIST_CPU(n)   GICD_SGIR_CPULIST(BIT(n))
 
#define GICD_SGIR_CPULIST_MASK   0xff
 
#define GICD_SGIR_NSATT   BIT(15)
 
#define GICD_SGIR_SGIINTID(x)   (x)
 
#define GICD_ICFGR_MASK   BIT_MASK(2)
 
#define GICD_ICFGR_TYPE   BIT(1)
 
#define GICD_TYPER_ITLINESNUM_MASK   0x1f
 
#define GICD_TYPER_IDBITS(typer)   ((((typer) >> 19) & 0x1f) + 1)
 
#define GIC_SGI_INT_BASE   0
 
#define GIC_PPI_INT_BASE   16
 
#define GIC_IS_SGI(intid)
 
#define GIC_SPI_INT_BASE   32
 
#define GIC_SPI_MAX_INTID   1019
 
#define GIC_IS_SPI(intid)
 
#define GIC_NUM_INTR_PER_REG   32
 
#define GIC_NUM_CFG_PER_REG   16
 
#define GIC_NUM_PRI_PER_REG   4
 
#define GIC_IDLE_PRIO   0xff
 
#define GIC_PRI_MASK   0xff
 
#define GIC_INT_DEF_PRI_X4   0xa0a0a0a0
 
#define GIC_INTID_SPURIOUS   1023
 
#define GIC_NUM_CPU_IF   CONFIG_MP_MAX_NUM_CPUS
 

Functions

void arm_gic_irq_enable (unsigned int irq)
 Enable interrupt.
 
void arm_gic_irq_disable (unsigned int irq)
 Disable interrupt.
 
bool arm_gic_irq_is_enabled (unsigned int irq)
 Check if an interrupt is enabled.
 
bool arm_gic_irq_is_pending (unsigned int irq)
 Check if an interrupt is pending.
 
void arm_gic_irq_clear_pending (unsigned int irq)
 Clear the pending irq.
 
void arm_gic_irq_set_priority (unsigned int irq, unsigned int prio, unsigned int flags)
 Set interrupt priority.
 
unsigned int arm_gic_get_active (void)
 Get active interrupt ID.
 
void arm_gic_eoi (unsigned int irq)
 Signal end-of-interrupt.
 
void arm_gic_secondary_init (void)
 Initialize GIC of secondary cores.
 
void gic_raise_sgi (unsigned int sgi_id, uint64_t target_aff, uint16_t target_list)
 raise SGI to target cores
 

Detailed Description

Driver for ARM Generic Interrupt Controller.

The Generic Interrupt Controller (GIC) is the default interrupt controller for the ARM A and R profile cores. This driver is used by the ARM arch implementation to handle interrupts.

Macro Definition Documentation

◆ GIC_CPU_BASE

#define GIC_CPU_BASE   DT_REG_ADDR_BY_IDX(DT_INST(0, arm_gic), 1)

◆ GIC_DIST_BASE

#define GIC_DIST_BASE   DT_REG_ADDR_BY_IDX(DT_INST(0, arm_gic), 0)

◆ GIC_IDLE_PRIO

#define GIC_IDLE_PRIO   0xff

◆ GIC_INT_DEF_PRI_X4

#define GIC_INT_DEF_PRI_X4   0xa0a0a0a0

◆ GIC_INTID_SPURIOUS

#define GIC_INTID_SPURIOUS   1023

◆ GIC_IS_SGI

#define GIC_IS_SGI (   intid)
Value:
(((intid) >= GIC_SGI_INT_BASE) && \
((intid) < GIC_PPI_INT_BASE))
#define GIC_PPI_INT_BASE
Definition: gic.h:226
#define GIC_SGI_INT_BASE
Definition: gic.h:225

◆ GIC_IS_SPI

#define GIC_IS_SPI (   intid)
Value:
(((intid) >= GIC_SPI_INT_BASE) && \
((intid) <= GIC_SPI_MAX_INTID))
#define GIC_SPI_MAX_INTID
Definition: gic.h:234
#define GIC_SPI_INT_BASE
Definition: gic.h:232

◆ GIC_NUM_CFG_PER_REG

#define GIC_NUM_CFG_PER_REG   16

◆ GIC_NUM_CPU_IF

#define GIC_NUM_CPU_IF   CONFIG_MP_MAX_NUM_CPUS

◆ GIC_NUM_INTR_PER_REG

#define GIC_NUM_INTR_PER_REG   32

◆ GIC_NUM_PRI_PER_REG

#define GIC_NUM_PRI_PER_REG   4

◆ GIC_PPI_INT_BASE

#define GIC_PPI_INT_BASE   16

◆ GIC_PRI_MASK

#define GIC_PRI_MASK   0xff

◆ GIC_SGI_INT_BASE

#define GIC_SGI_INT_BASE   0

◆ GIC_SPI_INT_BASE

#define GIC_SPI_INT_BASE   32

◆ GIC_SPI_MAX_INTID

#define GIC_SPI_MAX_INTID   1019

◆ GICC_BPR

#define GICC_BPR   (GIC_CPU_BASE + 0x8)

◆ GICC_CTLR

#define GICC_CTLR   (GIC_CPU_BASE + 0x0)

◆ GICC_CTLR_ENABLE_MASK

#define GICC_CTLR_ENABLE_MASK   (GICC_CTLR_ENABLEGRP0 | GICC_CTLR_ENABLEGRP1)

◆ GICC_CTLR_ENABLEGRP0

#define GICC_CTLR_ENABLEGRP0   BIT(0)

◆ GICC_CTLR_ENABLEGRP1

#define GICC_CTLR_ENABLEGRP1   BIT(1)

◆ GICC_EOIR

#define GICC_EOIR   (GIC_CPU_BASE + 0x10)

◆ GICC_IAR

#define GICC_IAR   (GIC_CPU_BASE + 0xc)

◆ GICC_PMR

#define GICC_PMR   (GIC_CPU_BASE + 0x4)

◆ GICD_CTLR

#define GICD_CTLR   (GIC_DIST_BASE + 0x0)

◆ GICD_ICENABLERn

#define GICD_ICENABLERn   (GIC_DIST_BASE + 0x180)

◆ GICD_ICFGR_MASK

#define GICD_ICFGR_MASK   BIT_MASK(2)

◆ GICD_ICFGR_TYPE

#define GICD_ICFGR_TYPE   BIT(1)

◆ GICD_ICFGRn

#define GICD_ICFGRn   (GIC_DIST_BASE + 0xc00)

◆ GICD_ICPENDRn

#define GICD_ICPENDRn   (GIC_DIST_BASE + 0x280)

◆ GICD_IGROUPRn

#define GICD_IGROUPRn   (GIC_DIST_BASE + 0x80)

◆ GICD_IIDR

#define GICD_IIDR   (GIC_DIST_BASE + 0x8)

◆ GICD_IPRIORITYRn

#define GICD_IPRIORITYRn   (GIC_DIST_BASE + 0x400)

◆ GICD_ISACTIVERn

#define GICD_ISACTIVERn   (GIC_DIST_BASE + 0x300)

◆ GICD_ISENABLERn

#define GICD_ISENABLERn   (GIC_DIST_BASE + 0x100)

◆ GICD_ISPENDRn

#define GICD_ISPENDRn   (GIC_DIST_BASE + 0x200)

◆ GICD_ITARGETSRn

#define GICD_ITARGETSRn   (GIC_DIST_BASE + 0x800)

◆ GICD_SGIR

#define GICD_SGIR   (GIC_DIST_BASE + 0xf00)

◆ GICD_SGIR_CPULIST

#define GICD_SGIR_CPULIST (   x)    ((x) << 16)

◆ GICD_SGIR_CPULIST_CPU

#define GICD_SGIR_CPULIST_CPU (   n)    GICD_SGIR_CPULIST(BIT(n))

◆ GICD_SGIR_CPULIST_MASK

#define GICD_SGIR_CPULIST_MASK   0xff

◆ GICD_SGIR_NSATT

#define GICD_SGIR_NSATT   BIT(15)

◆ GICD_SGIR_SGIINTID

#define GICD_SGIR_SGIINTID (   x)    (x)

◆ GICD_SGIR_TGTFILT

#define GICD_SGIR_TGTFILT (   x)    ((x) << 24)

◆ GICD_SGIR_TGTFILT_ALLBUTREQ

#define GICD_SGIR_TGTFILT_ALLBUTREQ   GICD_SGIR_TGTFILT(0b01)

◆ GICD_SGIR_TGTFILT_CPULIST

#define GICD_SGIR_TGTFILT_CPULIST   GICD_SGIR_TGTFILT(0b00)

◆ GICD_SGIR_TGTFILT_REQONLY

#define GICD_SGIR_TGTFILT_REQONLY   GICD_SGIR_TGTFILT(0b10)

◆ GICD_TYPER

#define GICD_TYPER   (GIC_DIST_BASE + 0x4)

◆ GICD_TYPER_IDBITS

#define GICD_TYPER_IDBITS (   typer)    ((((typer) >> 19) & 0x1f) + 1)

◆ GICD_TYPER_ITLINESNUM_MASK

#define GICD_TYPER_ITLINESNUM_MASK   0x1f

Function Documentation

◆ arm_gic_eoi()

void arm_gic_eoi ( unsigned int  irq)

Signal end-of-interrupt.

Parameters
irqinterrupt ID

◆ arm_gic_get_active()

unsigned int arm_gic_get_active ( void  )

Get active interrupt ID.

Returns
Returns the ID of an active interrupt

◆ arm_gic_irq_clear_pending()

void arm_gic_irq_clear_pending ( unsigned int  irq)

Clear the pending irq.

Parameters
irqinterrupt ID

◆ arm_gic_irq_disable()

void arm_gic_irq_disable ( unsigned int  irq)

Disable interrupt.

Parameters
irqinterrupt ID

◆ arm_gic_irq_enable()

void arm_gic_irq_enable ( unsigned int  irq)

Enable interrupt.

Parameters
irqinterrupt ID

◆ arm_gic_irq_is_enabled()

bool arm_gic_irq_is_enabled ( unsigned int  irq)

Check if an interrupt is enabled.

Parameters
irqinterrupt ID
Returns
Returns true if interrupt is enabled, false otherwise

◆ arm_gic_irq_is_pending()

bool arm_gic_irq_is_pending ( unsigned int  irq)

Check if an interrupt is pending.

Parameters
irqinterrupt ID
Returns
Returns true if interrupt is pending, false otherwise

◆ arm_gic_irq_set_priority()

void arm_gic_irq_set_priority ( unsigned int  irq,
unsigned int  prio,
unsigned int  flags 
)

Set interrupt priority.

Parameters
irqinterrupt ID
priointerrupt priority
flagsinterrupt flags

◆ arm_gic_secondary_init()

void arm_gic_secondary_init ( void  )

Initialize GIC of secondary cores.

◆ gic_raise_sgi()

void gic_raise_sgi ( unsigned int  sgi_id,
uint64_t  target_aff,
uint16_t  target_list 
)

raise SGI to target cores

Parameters
sgi_idSGI ID 0 to 15
target_afftarget affinity in mpidr form. Aff level 1 2 3 will be extracted by api.
target_listbitmask of target cores