Bluetooth: Peripheral LBS

The peripheral LBS sample demonstrates how to use the LED Button Service (LBS).

Requirements

The sample supports the following development kits:

Hardware platforms	PCA	Board name	Board target
Thingy:53	PCA20053	thingy53	thingy53/nrf5340/cpuapp/ns thingy53/nrf5340/cpuapp
nRF54L15 PDK	PCA10156	nrf54l15pdk	nrf54l15pdk/nrf54l15/cpuapp
nRF54L15 DK	PCA10156	nrf54l15dk	nrf54l15dk/nrf54l15/cpuapp
nRF54H20 DK	PCA10175	nrf54h20dk	nrf54h20dk/nrf54h20/cpuapp
nRF5340 DK	PCA10095	nrf5340dk	nrf5340dk/nrf5340/cpuapp/ns nrf5340dk/nrf5340/cpuapp
nRF52 DK	PCA10040	nrf52dk	nrf52dk/nrf52832
nRF52 DK (emulating nRF52810)	PCA10040	nrf52dk	nrf52dk/nrf52810
nRF52840 DK	PCA10056	nrf52840dk	nrf52840dk/nrf52840
nRF52840 DK (emulating nRF52811)	PCA10056	nrf52840dk	nrf52840dk/nrf52811
nRF52833 DK (emulating nRF52820)	PCA10100	nrf52833dk	nrf52833dk/nrf52820

When built for a board target with the */ns variant, the sample is configured to compile and run as a non-secure application with Cortex-M Security Extensions enabled. Therefore, it automatically includes Trusted Firmware-M that prepares the required peripherals and secure services to be available for the application.

The sample also requires a smartphone or tablet running a compatible application. The Testing instructions refer to nRF Connect for Mobile, but you can also use other similar applications (for example, nRF Blinky or nRF Toolbox).

Note

If you build this application for Thingy:53, it enables additional features. See Application guide for Thingy:53 for details.

Overview

You can use the sample to transmit the button state from your development kit to another device.

nRF52 and nRF53 DKsnRF54 DKs

When connected, the sample sends the state of Button 1 on the development kit to the connected device, such as a phone or tablet. The mobile application on the device can display the received button state and control the state of LED 3 on the development kit.

You can also use this sample to control the color of the RGB LED on the nRF52840 Dongle or Thingy:53.

User interface

The user interface of the sample depends on the hardware platform you are using.

nRF52 and nRF53 DKsnRF54 DKsThingy:53nRF52840 Dongle

LED 1:

Blinks when the main loop is running (that is, the device is advertising) with a period of two seconds, duty cycle 50%.

LED 2:

Lit when the development kit is connected.

LED 3:

Lit when the development kit is controlled remotely from the connected device.

Button 1:

Send a notification with the button state: “pressed” or “released”.

Building and running

This sample can be found under samples/bluetooth/peripheral_lbs in the nRF Connect SDK folder structure.

When built as firmware image for a board target with the */ns variant, the sample has Cortex-M Security Extensions (CMSE) enabled and separates the firmware between Non-Secure Processing Environment (NSPE) and Secure Processing Environment (SPE). Because of this, it automatically includes the Trusted Firmware-M (TF-M). To read more about CMSE, see Processing environments.

To build the sample, follow the instructions in Building an application for your preferred building environment. See also Programming an application for programming steps and Testing and optimization for general information about testing and debugging in the nRF Connect SDK.

Note

When building repository applications in the SDK repositories, building with sysbuild is enabled by default. If you work with out-of-tree freestanding applications, you need to manually pass the --sysbuild parameter to every build command or configure west to always use it.

Note

Programming the nRF54H20 SoC can sometimes fail due to conflicts in the resource configuration. This can happen if, for example, an application programmed to the nRF54H20 SoC configured the UICRs for one or more cores in a way that is incompatible with the configuration required by the application you are trying to program on the SoC.

To fix this error and erase the UICR for the application core, run the following command:

nrfutil device recover --core Application

If your sample also uses the radio core, you must also erase the UICRs for the radio core. To erase the UICR for the radio core, run the following command:

nrfutil device recover --core Network

For more information on the command, run:

nrfutil device recover --help

You can then run west flash to program your application.

Minimal build

You can build the sample with a minimum configuration as a demonstration of how to reduce code size and RAM usage, using the -DFILE_SUFFIX=minimal flag in your build.

See Providing CMake options for instructions on how to add this option to your build. For example, when building on the command line, you can add the option as follows:

west build samples/bluetooth/peripheral_lbs -- -DFILE_SUFFIX=minimal

Testing

After programming the sample to your dongle or development kit, test it by performing the following steps:

nRF52 and nRF53 DKsnRF54 DKs

1. Start the nRF Connect for Mobile application on your smartphone or tablet.

2. Power on the development kit or insert your dongle into the USB port.

3. Connect to the device from the application. The device is advertising as Nordic_LBS. The services of the connected device are shown.

4. In Nordic LED Button Service, enable notifications for the Button characteristic.

5. Press Button 1 on the device.

6. Observe that notifications with the following values are displayed:

   • Button released when Button 1 is released.

   • Button pressed when Button 1 is pressed.

7. Write the following values to the LED characteristic in the Nordic LED Button Service. Depending on the hardware platform, this produces results described in the table.

Hardware platform	Value	Effect
Development kit	OFF	Switch the LED 3 off.
	ON	Switch the LED 3 on.
nRF52840 Dongle	OFF	Switch the green channel of the RGB LED off.
	ON	Switch the green channel of the RGB LED on.
Thingy:53	OFF	Switch the blue channel of the RGB LED off.
	ON	Switch the blue channel of the RGB LED on.

Dependencies

This sample uses the following nRF Connect SDK libraries:

• LED Button Service (LBS)

• DK Buttons and LEDs

In addition, it uses the following Zephyr libraries:

• include/zephyr/types.h

• lib/libc/minimal/include/errno.h

• include/sys/printk.h

• include/sys/byteorder.h

• GPIO Interface

• API:

  • include/bluetooth/bluetooth.h

  • include/bluetooth/hci.h

  • include/bluetooth/conn.h

  • include/bluetooth/uuid.h

  • include/bluetooth/gatt.h

The sample also uses the following secure firmware component:

• Trusted Firmware-M