MPSL FEM-only configuration

If your application cannot use MPSL, you can use only the FEM driver provided by MPSL by enabling the following Kconfig options:

• CONFIG_MPSL

• CONFIG_MPSL_FEM_ONLY

You can use the FEM-only configuration to run simple radio protocols that are not intended to be used concurrently with other protocols.

Some applications might perform calls to the Front-end module feature API even though no RF Front-End module is physically connected to the device and the CONFIG_MPSL_FEM Kconfig option is set to n. In that case, ensure that the CONFIG_MPSL_FEM_API_AVAILABLE Kconfig option is set to y.