Installing manually

The recommended way to get started with the nRF Connect SDK is to use nRF Connect for Desktop. See the Installing automatically page for information about how to install automatically.

Note

If you use nRF Connect for Desktop to install the nRF Connect SDK, you can skip this section of the documentation. If you prefer to install the toolchain manually, see the following documentation for instructions.

To manually install the nRF Connect SDK, you must install all required tools and clone the nRF Connect SDK repositories. See the following sections for detailed instructions.

If you already have your system set up to work with Zephyr OS based on Zephyr’s Getting Started Guide, you already have some of the requirements for the nRF Connect SDK installed. The only requirement not covered by the installation steps in Zephyr is the GN tool. This tool is needed only for Matter (Project CHIP) applications. You can also skip the Install the GNU Arm Embedded Toolchain section.

Before you start setting up the toolchain, install available updates for your operating system. See Requirements for information on the supported operating systems and Zephyr features.

Install the required tools

The installation process is different depending on your operating system.

Note

You will be asked to reboot after installing some of the tools. You can skip these notifications and reboot only once after you complete the installation of all tools.

The recommended way for installing the required tools on Windows is to use Chocolatey, a package manager for Windows. Chocolatey installs the tools so that you can use them from a Windows command-line window.

To install the required tools, complete the following steps:

  1. Install chocolatey.

  2. Open a cmd.exe window as Administrator. To do so, press the Windows key, type “cmd.exe”, right-click the result, and choose Run as Administrator.

  3. Disable global confirmation to avoid having to confirm the installation of individual programs:

    choco feature enable -n allowGlobalConfirmation
    
  4. Use choco to install the required dependencies:

    choco install cmake --installargs 'ADD_CMAKE_TO_PATH=System'
    choco install ninja gperf python git dtc-msys2
    

Ensure that these dependencies are installed with their versions as specified in the Required tools table.

In addition to these required tools, install the GN meta-build system if you are interested in building Matter (formerly Project Connected Home over IP, Project CHIP) applications. This system generates the Ninja files that the nRF Connect SDK uses.

To install the GN tool, complete the following steps:

  1. Download the latest version of the GN binary archive for Windows from the GN website.

  2. Extract the zip archive.

  3. Check that the GN tool is added to your PATH environment variable. See Environment Variables for instructions if needed.

Install west

To manage the combination of repositories and versions, the nRF Connect SDK uses Zephyr’s west.

To install west, complete the following step:

Enter the following command in a command-line window:

pip3 install west

You only need to do this once.

Get the nRF Connect SDK code

Every nRF Connect SDK release consists of a combination of Git repositories at different revisions. The revision of each of those repositories is determined by the current revision of the main (or manifest) repository, sdk-nrf.

Note

The latest state of development is on the main branch of the sdk-nrf repository. To ensure a usable state, the sdk-nrf repository defines the compatible states of the other repositories. However, this state is not necessarily tested. For a higher degree of quality assurance, check out a tagged release.

Unless you are familiar with the development process, you should always work with a specific release of the nRF Connect SDK.

For more information about the repository and development model, see the development model section.

To clone the repositories, complete the following steps:

  1. Create a folder named ncs. This folder will hold all nRF Connect SDK repositories.

  2. Determine the identifier of the revision of the nRF Connect SDK you want to work with. The recommended way is to work with a specific release.

    • To work with a specific release, the identifier is the corresponding tag (for example, v1.9.1). You can find the tag in the Release notes of the release.

    • To work with a development tag, the identifier is the corresponding tag (for example, v1.2.99-dev1)

    • To work with a branch, the identifier is the branch name (for example, main to work with the latest state of development).

    • To work with a specific state, the identifier is the SHA (for example, 224bee9055d986fe2677149b8cbda0ff10650a6e).

  3. From the command line, initialize west with the revision of the nRF Connect SDK that you want to check out, replacing NCS_revision with the identifier:

    west init -m https://github.com/nrfconnect/sdk-nrf --mr NCS_revision

    For example, to check out the v1.9.1 release, enter the following command:

    west init -m https://github.com/nrfconnect/sdk-nrf --mr v1.9.1

    To check out the latest state of development, enter the following command:

    west init -m https://github.com/nrfconnect/sdk-nrf --mr main
    

    Note

    If you get an error message when running west, update west to the latest version. See Troubleshooting West if you need more information.

    Initializing west with a specific revision of the manifest file does not lock your repositories to this version. Checking out a different branch or tag in the sdk-nrf repository and running west update changes the version of the nRF Connect SDK that you work with.

    This will clone the manifest repository sdk-nrf into nrf.

  4. Enter the following command to clone the project repositories:

    west update
    

    Depending on your connection, this might take some time.

  5. Export a Zephyr CMake package. This allows CMake to automatically load the boilerplate code required for building nRF Connect SDK applications:

    west zephyr-export
    

Your directory structure now looks similar to this:

ncs
 |___ .west
 |___ bootloader
 |___ modules
 |___ nrf
 |___ nrfxlib
 |___ zephyr
 |___ ...

Note that there are additional folders, and that the structure might change. The full set of repositories and folders is defined in the manifest file.

Install additional Python dependencies

The nRF Connect SDK requires additional Python packages to be installed.

Use the following commands to install the requirements for each repository.

Enter the following command in a command-line window in the ncs folder:

pip3 install -r zephyr/scripts/requirements.txt
pip3 install -r nrf/scripts/requirements.txt
pip3 install -r bootloader/mcuboot/scripts/requirements.txt

Install the GNU Arm Embedded Toolchain

To be able to cross-compile your applications for Arm targets, you must install version 9-2019-q4-major of the GNU Arm Embedded Toolchain.

Important

Make sure to install the toolchain version that is mentioned above. Other toolchain versions might not work with this version of the nRF Connect SDK. Similarly, other versions of the nRF Connect SDK might require a different toolchain version.

Do not use GNU Arm Embedded Toolchain versions 9-2020-q2-update and 10-2020-q4-major due to TF-M sample incompatibility issue. These versions do not work correctly when compiling binaries for Cortex-M Secure Extensions.

To set up the toolchain, complete the following steps:

  1. Download the GNU Arm Embedded Toolchain for your operating system.

  2. Extract the contents of the root folder of the toolchain into a directory of your choice. The recommended folder is c:\gnuarmemb on Windows and ~/gnuarmemb on Linux or macOS. Make sure that the folder name does not contain any spaces or special characters. By default, the contents are extracted to another folder that corresponds to the GNU Arm Embedded Toolchain version (version-folder in the following step). For example, c:\gccarmemb\9_2019-q4-major, where 9_2019-q4-major is the version-folder name edited to contain no empty spaces.

  3. If you want to build and program applications from the command line, define the environment variables for the GNU Arm Embedded Toolchain. Depending on your operating system:

    Open a command-line window and enter the commands below.

    If you did not install the toolchain in the recommended folder, change the value of GNUARMEMB_TOOLCHAIN_PATH to the folder you used and make sure to provide the name of the version-folder.

    set ZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb
    set GNUARMEMB_TOOLCHAIN_PATH=c:\gnuarmemb\version-folder
  4. Set the environment variables persistently. Depending on your operating system:

    Add the environment variables as system environment variables or define them in the %userprofile%zephyrrc.cmd file as described in Set up the command-line build environment. This lets you avoid setting them every time you open a command-line window.

Install a build IDE

You can install either the nRF Connect for Visual Studio Code extension or the SEGGER Embedded Studio (SES) Nordic Edition to open and compile projects in the nRF Connect SDK:

Visual Studio Code extension

The nRF Connect for Visual Studio Code extension is a complete IDE for developing applications for nRF91, nRF53 and nRF52 Series devices. This includes an interface to the compiler and linker, an RTOS-aware debugger, a seamless interface to the nRF Connect SDK, and a serial terminal. For detailed instructions, see the nRF Connect for Visual Studio Code documentation site.

SEGGER Embedded Studio Nordic Edition

You can install the SEGGER Embedded Studio (SES) Nordic Edition to open and compile projects in the nRF Connect SDK. SES is free of charge for use with Nordic Semiconductor devices.

To install the Nordic Edition, download the package for your operating system:

Extract the downloaded package in the directory of your choice.

Note

Notifications about newer versions of SES are disabled in the SES Nordic Edition. This is because of the custom nRF Connect SDK options that are available only in the Nordic Edition. You will not be able to use SES with the nRF Connect SDK if you install the latest standard version of SES.

When you move to a newer release of the nRF Connect SDK, check the Requirements page for the given release to see if you are using the minimum required version of SES Nordic Edition. If you need to install the latest version of the SES Nordic Edition, follow the steps described above and make sure to set up the build environment in SES once more.

Set up the build environment in SES

If you chose to use SEGGER Embedded Studio for building and programming a sample application, you must first set up your build environment.

  1. Set up the SES environment. If you plan to build with SEGGER Embedded Studio, the first time you import an nRF Connect SDK project, SES might prompt you to set the paths to the Zephyr Base directory and the GNU ARM Embedded Toolchain. You only need to do this once. Complete the following steps:

    1. Navigate to the bin directory.

    2. Run the emStudio executable file.

    3. Click OK on the pop-up window that opens.

      Open GNU ARM Embedded Toolchain directory

      Open GNU ARM Embedded Toolchain directory

    4. Set the GNU ARM Embedded Toolchain directory path to the location where it was downloaded (for example, c:\gnuarmemb).

    5. Close the nRF Connect options window.

    6. Navigate to Tools > Options and select the nRF Connect tab.

    7. Set the full path of the Zephyr Base directory to ncs/zephyr.

  2. Set up executables. The process is different depending on your operating system.

    Make sure the locations of executable tools are added to the PATH variable, including Python, CMake, Ninja, and DTC. On Windows, SES uses the PATH variable to find executables if they are not set in SES.

If you want to change the SES environment settings after the initial setup, click Tools > Options and select the nRF Connect tab, as shown on the following screenshot from the Windows installation.

nRF Connect SDK options in SES on Windows

nRF Connect SDK options in SES (Windows)

If you want to configure tools that are not listed in the SES options, add them to the PATH variable.

Set up the command-line build environment

In addition to nRF Connect for Visual Studio Code and SEGGER Embedded Studio, you can also build and program your application from the command line. You have to set up your build environment by defining the required environment variables every time you open a new command-line or terminal window.

See Important Build System Variables for more information about the various relevant environment variables.

Define the required environment variables as follows, depending on your operating system:

Navigate to the ncs folder and enter the following command: zephyr\zephyr-env.cmd

If you need to define additional environment variables, create the file %userprofile%zephyrrc.cmd and add the variables there. This file is loaded automatically when you run the above command. See Option 3: Using zephyrrc files for more information.

You must also make sure that nrfjprog (part of the nRF Command Line Tools) is installed and its path is added to the environment variables. The west command programs the development kit by using nrfjprog by default. For more information on nrfjprog, see Programming SoCs with nrfjprog.