Glucose Meter service Sample Application. More...

Macros
#define	KEY_PRESS_BUTTON_PIN_NO NRF6310_BUTTON_0

#define	BONDMNGR_DELETE_BUTTON_PIN_NO NRF6310_BUTTON_1

#define	DEVICE_NAME "Nordic_Glucose"

#define	MANUFACTURER_NAME "NordicSemiconductor"

#define	APP_ADV_INTERVAL 40

#define	APP_ADV_TIMEOUT_IN_SECONDS 180

#define	APP_TIMER_PRESCALER 0

#define	APP_TIMER_MAX_TIMERS 3

#define	APP_TIMER_OP_QUEUE_SIZE 4

#define	BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(10000, APP_TIMER_PRESCALER)

#define	MIN_BATTERY_LEVEL 81

#define	MAX_BATTERY_LEVEL 100

#define	BATTERY_LEVEL_INCREMENT 1

#define	MIN_CONN_INTERVAL MSEC_TO_UNITS(10, UNIT_1_25_MS)

#define	MAX_CONN_INTERVAL MSEC_TO_UNITS(100, UNIT_1_25_MS)

#define	SLAVE_LATENCY 0

#define	CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS)

#define	FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER)

#define	NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER)

#define	MAX_CONN_PARAM_UPDATE_COUNT 3

#define	APP_GPIOTE_MAX_USERS 1

#define	BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50, APP_TIMER_PRESCALER)

#define	SEC_PARAM_TIMEOUT 30

#define	SEC_PARAM_BOND 1

#define	SEC_PARAM_MITM 1

#define	SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_DISPLAY_ONLY

#define	SEC_PARAM_OOB 0

#define	SEC_PARAM_MIN_KEY_SIZE 7

#define	SEC_PARAM_MAX_KEY_SIZE 16

#define	FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END - 3)

#define	FLASH_PAGE_BOND (BLE_FLASH_PAGE_END - 1)

#define	PASSKEY_TXT "Passkey:"

#define	PASSKEY_TXT_LENGTH 8

#define	PASSKEY_LENGTH 6

#define	DEAD_BEEF 0xDEADBEEF

Functions
void	app_error_handler (uint32_t error_code, uint32_t line_num, const uint8_t *p_file_name)
	Function for error handling, which is called when an error has occurred. More...

void	assert_nrf_callback (uint16_t line_num, const uint8_t *p_file_name)
	Callback function for asserts in the SoftDevice. More...

static void	service_error_handler (uint32_t nrf_error)
	Function for handling Service errors. More...

static void	battery_level_update (void)
	Function for performing a battery measurement, and update the Battery Level characteristic in the Battery Service.

static void	battery_level_meas_timeout_handler (void *p_context)
	Function for handling the Battery measurement timer timeout. More...

static void	read_glucose_measurement (void)
	Function for updating glucose measurement, and updating glucose characteristic in Glucose Service.

static void	leds_init (void)
	Function for the LEDs initialization. More...

static void	timers_init (void)
	Function for the Timer initialization. More...

static void	gap_params_init (void)
	Function for the GAP initialization. More...

static void	advertising_init (void)
	Function for initializing the Advertising functionality. More...

static void	services_init (void)
	Function for initializing services that will be used by the application. More...

static void	sensor_sim_init (void)
	Function for initializing the sensor simulators.

static void	sec_params_init (void)
	Function for initializing security parameters.

static void	application_timers_start (void)
	Function for starting application timers.

static void	advertising_start (void)
	Function for starting advertising.

static void	on_conn_params_evt (ble_conn_params_evt_t *p_evt)
	Function for handling the Connection Parameters Module. More...

static void	conn_params_error_handler (uint32_t nrf_error)
	Function for handling a Connection Parameters error. More...

static void	conn_params_init (void)
	Function for initializing the Connection Parameters module.

static void	on_ble_evt (ble_evt_t *p_ble_evt)
	Function for handling the Application's BLE Stack events. More...

static void	ble_evt_dispatch (ble_evt_t *p_ble_evt)
	Function for dispatching a BLE stack event to all modules with a BLE stack event handler. More...

static void	ble_stack_init (void)
	Function for initializing the BLE stack. More...

static void	bond_manager_error_handler (uint32_t nrf_error)
	Function for handling a Bond Manager error. More...

static void	bond_manager_init (void)
	Function for the Bond Manager initialization.

static void	radio_notification_init (void)
	Function for initializing the Radio Notification event.

static void	button_event_handler (uint8_t pin_no)
	Function for handling button events. More...

static void	gpiote_init (void)
	Function for initializing the GPIOTE handler module.

static void	buttons_init (void)
	Function for initializing the button handler module.

static void	power_manage (void)
	Function for the Power manager.

void	nrf6350_init (void)
	Function for the initialization of the nRF 6350 display.

int	main (void)
	Function for application main entry.

Variables
static uint16_t	m_conn_handle = BLE_CONN_HANDLE_INVALID

static ble_gap_sec_params_t	m_sec_params

static ble_gap_adv_params_t	m_adv_params

static ble_bas_t	m_bas

static ble_gls_t	m_gls

static ble_sensorsim_cfg_t	m_battery_sim_cfg

static ble_sensorsim_state_t	m_battery_sim_state

static app_timer_id_t	m_battery_timer_id

static bool	m_is_display_available

Detailed Description

This file contains the source code for a sample application using the Glucose Meter service (and also Battery and Device Information services). This application uses the srvlib_conn_params module.

Macro Definition Documentation

#define KEY_PRESS_BUTTON_PIN_NO NRF6310_BUTTON_0

Button used for sending keyboard text.

#define BONDMNGR_DELETE_BUTTON_PIN_NO NRF6310_BUTTON_1

Button used for deleting all bonded masters during startup.

#define DEVICE_NAME "Nordic_Glucose"

Name of device. Will be included in the advertising data.

#define MANUFACTURER_NAME "NordicSemiconductor"

Manufacturer. Will be passed to Device Information Service.

#define APP_ADV_INTERVAL 40

The advertising interval (in units of 0.625 ms. This value corresponds to 25 ms).

#define APP_ADV_TIMEOUT_IN_SECONDS 180

The advertising timeout in units of seconds.

#define APP_TIMER_PRESCALER 0

Value of the RTC1 PRESCALER register.

#define APP_TIMER_MAX_TIMERS 3

Maximum number of simultaneously created timers.

#define APP_TIMER_OP_QUEUE_SIZE 4

Size of timer operation queues.

#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(10000, APP_TIMER_PRESCALER)

Battery level measurement interval (ticks).

#define MIN_BATTERY_LEVEL 81

Minimum battery level as returned by the simulated measurement function.

#define MAX_BATTERY_LEVEL 100

Maximum battery level as returned by the simulated measurement function.

#define BATTERY_LEVEL_INCREMENT 1

Value by which the battery level is incremented/decremented for each call to the simulated measurement function.

#define MIN_CONN_INTERVAL MSEC_TO_UNITS(10, UNIT_1_25_MS)

Minimum acceptable connection interval (10 ms).

#define MAX_CONN_INTERVAL MSEC_TO_UNITS(100, UNIT_1_25_MS)

Maximum acceptable connection interval (100 ms)

#define SLAVE_LATENCY 0

Slave latency.

#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS)

Connection supervisory timeout (4 seconds).

#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER)

Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (15 seconds).

#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER)

Time between each call to sd_ble_gap_conn_param_update after the first (5 seconds).

#define MAX_CONN_PARAM_UPDATE_COUNT 3

Number of attempts before giving up the connection parameter negotiation.

#define APP_GPIOTE_MAX_USERS 1

Maximum number of users of the GPIOTE handler.

#define BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50, APP_TIMER_PRESCALER)

Delay from a GPIOTE event until a button is reported as pushed (in number of timer ticks).

#define SEC_PARAM_TIMEOUT 30

Timeout for Pairing Request or Security Request (in seconds).

#define SEC_PARAM_BOND 1

Perform bonding.

#define SEC_PARAM_MITM 1

Man In The Middle protection required (applicable when display module is detected).

#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_DISPLAY_ONLY

Display I/O capabilities.

#define SEC_PARAM_OOB 0

Out Of Band data not available.

#define SEC_PARAM_MIN_KEY_SIZE 7

Minimum encryption key size.

#define SEC_PARAM_MAX_KEY_SIZE 16

Maximum encryption key size.

#define FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END - 3)

Flash page used for bond manager system attribute information.

#define FLASH_PAGE_BOND (BLE_FLASH_PAGE_END - 1)

Flash page used for bond manager bonding information.

#define PASSKEY_TXT "Passkey:"

Message to be displayed together with the pass-key.

#define PASSKEY_TXT_LENGTH 8

Length of message to be displayed together with the pass-key.

#define PASSKEY_LENGTH 6

Length of pass-key received by the stack for display.

#define DEAD_BEEF 0xDEADBEEF

Value used as error code on stack dump, can be used to identify stack location on stack unwind.

Function Documentation

void app_error_handler	(	uint32_t	error_code,
		uint32_t	line_num,
		const uint8_t *	p_file_name
	)

Warning: This handler is an example only and does not fit a final product. You need to analyze how your product is supposed to react in case of error.

Parameters

[in]	error_code	Error code supplied to the handler.
[in]	line_num	Line number where the handler is called.
[in]	p_file_name	Pointer to the file name.

void assert_nrf_callback	(	uint16_t	line_num,
		const uint8_t *	p_file_name
	)

This function will be called in case of an assert in the SoftDevice.

Warning: This handler is an example only and does not fit a final product. You need to analyze how your product is supposed to react in case of Assert.; On assert from the SoftDevice, the system can only recover on reset.

Parameters

[in]	line_num	Line number of the failing ASSERT call.
[in]	file_name	File name of the failing ASSERT call.

static void service_error_handler ( uint32_t nrf_error )

static

A pointer to this function will be passed to each service which may need to inform the application about an error.

Parameters

[in] nrf_error Error code containing information about what went wrong.

static void battery_level_meas_timeout_handler ( void * p_context )

static

This function will be called each time the battery level measurement timer expires.

Parameters

[in] p_context Pointer used for passing some arbitrary information (context) from the app_start_timer() call to the timeout handler.

static void leds_init ( void )

static

Initializes all LEDs used by this application.

static void timers_init ( void )

static

Initializes the timer module. This creates and starts application timers.

static void gap_params_init ( void )

static

This function shall be used to setup all the necessary GAP (Generic Access Profile) parameters of the device. It also sets the permissions and appearance.

static void advertising_init ( void )

static

Encodes the required advertising data and passes it to the stack. Also builds a structure to be passed to the stack when starting advertising.

static void services_init ( void )

static

Initialize the Glucose, Battery and Device Information services.

static void on_conn_params_evt ( ble_conn_params_evt_t * p_evt )

static

This function will be called for all events in the Connection Parameters Module which are passed to the application.

Note: All this function does is to disconnect. This could have been done by simply setting the disconnect_on_fail config parameter, but instead we use the event handler mechanism to demonstrate its use.

Parameters

[in] p_evt Event received from the Connection Parameters Module.

static void conn_params_error_handler ( uint32_t nrf_error )

static

Parameters

[in] nrf_error Error code containing information about what went wrong.

static void on_ble_evt ( ble_evt_t * p_ble_evt )

static

Parameters

[in] p_ble_evt Bluetooth stack event.

static void ble_evt_dispatch ( ble_evt_t * p_ble_evt )

static

This function is called from the BLE Stack event interrupt handler after a BLE stack event has been received.

Parameters

[in] p_ble_evt Bluetooth stack event.

static void ble_stack_init ( void )

static

Initializes the SoftDevice and the BLE event interrupt.

static void bond_manager_error_handler ( uint32_t nrf_error )

static

Parameters

[in] nrf_error Error code containing information about what went wrong.

static void button_event_handler ( uint8_t pin_no )

static

Parameters

[in] pin_no The pin number of the button pressed.

Variable Documentation

uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID

static

Handle of the current connection.

ble_gap_sec_params_t m_sec_params

static

Security requirements for this application.

ble_gap_adv_params_t m_adv_params

static

Parameters to be passed to the stack when starting advertising.

ble_bas_t m_bas

static

Structure used to identify the battery service.

ble_gls_t m_gls

static

Structure used to identify the glucose service.

ble_sensorsim_cfg_t m_battery_sim_cfg

static

Battery Level sensor simulator configuration.

ble_sensorsim_state_t m_battery_sim_state

static

Battery Level sensor simulator state.

app_timer_id_t m_battery_timer_id

static

Battery timer.

bool m_is_display_available

static

indicates if the display was initialized correctly, if not do not use MITM

Macros

Functions

Variables

Detailed Description

Macro Definition Documentation

Function Documentation

Variable Documentation