The ANT-FS client device simulator. More...

Macros
#define	ANT_EVENT_MSG_BUFFER_MIN_SIZE 32u

#define	ANTFS_CLIENT_SERIAL_NUMBER 0xABCDEF12u

#define	ANTFS_CLIENT_DEV_TYPE 416u

#define	ANTFS_CLIENT_MANUF_ID 2u

#define	ANTFS_CLIENT_NAME { "Ref Design" }

#define	ANTFS_CLIENT_PASSKEY {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10}

#define	APP_TIMER_MAX_TIMERS 2u

#define	APP_TIMER_OP_QUEUE_SIZE 4u

#define	APP_GPIOTE_MAX_USERS 1u

#define	BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50u, APP_TIMER_PRESCALER)

#define	ANTFS_VERSION_MAJOR 1u

#define	ANTFS_VERSION_MINOR 0

#define	ANTFS_VERSION_ITERATION 0

#define	ANTFS_VERSION_TYPE 'R'

#define	ANTFS_VERSION_SPEC '0.AK'

#define	ANTFS_DIR_STRUCT_VERSION 1u

#define	ANTFS_VERSION_DATE 20090522u

#define	ANTFS_NETWORK_NUMBER 0

#define	ANTFS_CHANNEL 0

#define	ANTFS_LINK_FREQ 50u

#define	ANTFS_PAIRING_TIMEOUT 120u

#define	ANTFS_LINK_COMMAND_TIMEOUT 10u

#define	ANTFS_TRANS_TYPE 5u

#define	ANTFS_DEVICE_TYPE 1u

#define	ANTFS_CHANNEL_TYPE CHANNEL_TYPE_MASTER

#define	ANTFS_BEACON_PERIOD_STATUS BEACON_PERIOD_4_HZ

#define	ANTFS_TRANSMIT_POWER 3u

#define	ANTFS_AUTH_STRING_MAX 255u

#define	ANTFS_PASSKEY_SIZE 16u

#define	ANTFS_FRIENDLY_NAME_MAX 16u

#define	ANTFS_REMOTE_FRIENDLY_NAME_MAX 16u

#define	BEACON_PERIOD_SHIFT 0x00

#define	BEACON_PERIOD_MASK (0x07u << BEACON_PERIOD_SHIFT)

#define	BEACON_PERIOD_0_5_HZ (0x00 << BEACON_PERIOD_SHIFT)

#define	BEACON_PERIOD_1_HZ (0x01u << BEACON_PERIOD_SHIFT)

#define	BEACON_PERIOD_2_HZ (0x02u << BEACON_PERIOD_SHIFT)

#define	BEACON_PERIOD_4_HZ (0x03u << BEACON_PERIOD_SHIFT)

#define	BEACON_PERIOD_8_HZ (0x04u << BEACON_PERIOD_SHIFT)

#define	PAIRING_AVAILABLE_FLAG_SHIFT 0x03u

#define	PAIRING_AVAILABLE_FLAG_MASK (0x01u << PAIRING_AVAILABLE_FLAG_SHIFT)

#define	UPLOAD_ENABLED_FLAG_SHIFT 0x04u

#define	UPLOAD_ENABLED_FLAG_MASK (0x01u << UPLOAD_ENABLED_FLAG_SHIFT)

#define	DATA_AVAILABLE_FLAG_SHIFT 0x05u

#define	DATA_AVAILABLE_FLAG_MASK (0x01u << DATA_AVAILABLE_FLAG_SHIFT)

#define	ANTFS_PAIRING_BIT 0x00u

#define	ANTFS_UPLOAD_BIT 0x00u

#define	ANTFS_DEFAULT_BEACON (ANTFS_BEACON_PERIOD_STATUS \| ANTFS_UPLOAD_BIT \| ANTFS_PAIRING_BIT \| DATA_AVAILABLE_FLAG_MASK)

#define	RESPONSE_MESSAGE_OK 0x00u

#define	RESPONSE_MESSAGE_NOT_EXIST 0x01u

#define	RESPONSE_MESSAGE_NOT_AVAILABLE 0x02u

#define	RESPONSE_MESSAGE_NOT_READY 0x03u

#define	RESPONSE_INVALID_OPERATION 0x04u

#define	RESPONSE_INVALID_CRC 0x05u

#define	RESPONSE_MESSAGE_NOT_ENOUGH_SPACE 0x03u

#define	RESPONSE_MESSAGE_FAIL 0x01u

#define	ANTFS_DIR_READ_MASK 0x80u

#define	ANTFS_DIR_WRITE_MASK 0x40u

#define	ANTFS_DIR_ERASE_MASK 0x20u

#define	ANTFS_DIR_ARCHIVE_MASK 0x10u

#define	ANTFS_DIR_APPEND_MASK 0x08u

#define	ANTFS_MAX_FILE_SIZE 0xFFFFFFFFu

#define	ANTFS_BURST_BLOCK_SIZE 20u

#define	MAX_ULONG 0xFFFFFFFFu

#define	APP_TIMER_PRESCALER 0

Enumerations
enum	pairing_state_t { PAIRING_OFF = 0, PAIRING_ACCEPT, PAIRING_DENY, PAIRING_OFF = 0, PAIRING_ACCEPT, PAIRING_DENY }

enum	antfs_state_t { ANTFS_STATE_OFF, ANTFS_STATE_INIT, ANTFS_STATE_LINK, ANTFS_STATE_AUTH, ANTFS_STATE_TRANS, ANTFS_STATE_OFF, ANTFS_STATE_INIT, ANTFS_STATE_LINK, ANTFS_STATE_AUTH, ANTFS_STATE_TRANS }

enum	antfs_link_substate_t { ANTFS_LINK_SUBSTATE_NONE, ANTFS_LINK_SUBSTATE_NONE }

enum	antfs_authenticate_substate_t { ANTFS_AUTH_SUBSTATE_NONE, ANTFS_AUTH_SUBSTATE_PAIR, ANTFS_AUTH_SUBSTATE_PASSKEY, ANTFS_AUTH_SUBSTATE_ACCEPT, ANTFS_AUTH_SUBSTATE_REJECT, ANTFS_AUTH_SUBSTATE_NONE, ANTFS_AUTH_SUBSTATE_PAIR, ANTFS_AUTH_SUBSTATE_PASSKEY, ANTFS_AUTH_SUBSTATE_ACCEPT, ANTFS_AUTH_SUBSTATE_REJECT }

enum	antfs_transport_substate_t { ANTFS_TRANS_SUBSTATE_NONE, ANTFS_TRANS_SUBSTATE_VERIFY_CRC, ANTFS_TRANS_SUBSTATE_DOWNLOADING, ANTFS_TRANS_SUBSTATE_UPLOAD_WAIT_FOR_DATA, ANTFS_TRANS_SUBSTATE_UPLOADING, ANTFS_TRANS_SUBSTATE_UPLOAD_RESUME, ANTFS_TRANS_SUBSTATE_NONE, ANTFS_TRANS_SUBSTATE_VERIFY_CRC, ANTFS_TRANS_SUBSTATE_DOWNLOADING, ANTFS_TRANS_SUBSTATE_UPLOAD_WAIT_FOR_DATA, ANTFS_TRANS_SUBSTATE_UPLOADING, ANTFS_TRANS_SUBSTATE_UPLOAD_RESUME }

enum	antfs_event_t { ANTFS_EVENT_PAIRING_REQUEST = 0xB0, ANTFS_EVENT_PAIRING_TIMEOUT = 0xB1, ANTFS_EVENT_OPEN_COMPLETE = 0xB2, ANTFS_EVENT_CLOSE_COMPLETE = 0xB4, ANTFS_EVENT_LINK = 0xB6, ANTFS_EVENT_AUTH = 0xB7, ANTFS_EVENT_TRANS = 0xB8, ANTFS_EVENT_DOWNLOAD_REQUEST = 0xB9, ANTFS_EVENT_DOWNLOAD_REQUEST_DATA = 0xBA, ANTFS_EVENT_DOWNLOAD_START = 0xBB, ANTFS_EVENT_DOWNLOAD_COMPLETE = 0xBC, ANTFS_EVENT_DOWNLOAD_FAIL = 0xBD, ANTFS_EVENT_UPLOAD_REQUEST = 0xBE, ANTFS_EVENT_UPLOAD_DATA = 0xBF, ANTFS_EVENT_UPLOAD_START = 0xC0, ANTFS_EVENT_UPLOAD_COMPLETE = 0xC1, ANTFS_EVENT_UPLOAD_FAIL = 0xC2, ANTFS_EVENT_ERASE_REQUEST = 0xC3, ANTFS_EVENT_PAIRING_REQUEST = 0xB0, ANTFS_EVENT_PAIRING_TIMEOUT = 0xB1, ANTFS_EVENT_OPEN_COMPLETE = 0xB2, ANTFS_EVENT_CLOSE_COMPLETE = 0xB4, ANTFS_EVENT_LINK = 0xB6, ANTFS_EVENT_AUTH = 0xB7, ANTFS_EVENT_TRANS = 0xB8, ANTFS_EVENT_DOWNLOAD_REQUEST = 0xB9, ANTFS_EVENT_DOWNLOAD_REQUEST_DATA = 0xBA, ANTFS_EVENT_DOWNLOAD_START = 0xBB, ANTFS_EVENT_DOWNLOAD_COMPLETE = 0xBC, ANTFS_EVENT_DOWNLOAD_FAIL = 0xBD, ANTFS_EVENT_UPLOAD_REQUEST = 0xBE, ANTFS_EVENT_UPLOAD_DATA = 0xBF, ANTFS_EVENT_UPLOAD_START = 0xC0, ANTFS_EVENT_UPLOAD_COMPLETE = 0xC1, ANTFS_EVENT_UPLOAD_FAIL = 0xC2, ANTFS_EVENT_ERASE_REQUEST = 0xC3 }

enum	leddriver_led_id_t { LED_ID_0, LED_ID_1, LED_ID_MAX, LED_ID_0, LED_ID_1, LED_ID_MAX }

Functions
void	softdevice_assert_callback (uint32_t pc, uint16_t line_num, const uint8_t *p_file_name)
	Function for handling softdevice asserts, does not return. More...

void	app_error_handler (uint32_t error_code, uint32_t line_num, const uint8_t *p_file_name)
	Function for handling an error. More...

void	PROTOCOL_EVENT_IRQHandler (void)
	Function for handling protocol stack IRQ. More...

static __INLINE void	pairing_user_feedback_handle (void)
	Function for processing user feedback for ANTFS pairing authentication request.

static __INLINE void	event_pairing_request_handle (void)
	Function for processing ANTFS pairing request event.

static void	event_download_request_handle (const antfs_event_return_t *p_event)
	Function for processing ANTFS download request event. More...

static void	event_download_data_handle (const antfs_event_return_t *p_event)
	Function for processing ANTFS download data event. More...

static void	event_upload_request_handle (const antfs_event_return_t *p_event)
	Function for processing ANTFS upload request data event. More...

static void	event_upload_data_handle (const antfs_event_return_t *p_event)
	Function for processing ANTFS upload data event. More...

static __INLINE void	event_upload_complete_handle (void)
	Function for processing ANTFS upload complete event.

static void	event_erase_request_handle (const antfs_event_return_t *p_event)
	Function for processing ANTFS erase request event. More...

static void	antfs_event_process (const antfs_event_return_t *p_event)
	Function for processing a single ANTFS event. More...

void	button_event_handle (uint8_t pin_no)
	Function for handling button events. More...

static __INLINE void	softdevice_setup (void)
	Function for configuring and setting up the softdevice.

int	main (void)
	Function for application main entry, does not return.

void	antfs_init (const antfs_params_t *const p_params)
	Function for setting initial ANT-FS configuration parameters. More...

const char *	antfs_hostname_get (void)
	Function for getting host name if received. More...

bool	antfs_pairing_resp_transmit (bool accept)
	Function for transmitting a response to a pairing request issued by ANT-FS host. More...

void	antfs_download_req_resp_prepare (uint8_t response, const antfs_request_info_t *const p_request_info)
	Function for doing calculations prior downloading the data to the ANT-FS host. More...

uint32_t	antfs_input_data_download (uint16_t index, uint32_t offset, uint32_t num_bytes, const uint8_t *const p_message)
	Function for downloading requested data. More...

bool	antfs_upload_req_resp_transmit (uint8_t response, const antfs_request_info_t *const p_request_info)
	Function for transmitting upload request response to a upload request command by ANT-FS host. More...

bool	antfs_upload_data_resp_transmit (bool data_upload_success)
	Function for transmitting upload data response to a upload data command by ANT-FS host. More...

void	antfs_erase_req_resp_transmit (uint8_t response)
	Function for transmitting erase response to a erase request. More...

bool	antfs_event_extract (antfs_event_return_t *const p_event)
	Function for extracting possible pending ANT-FS event. More...

void	antfs_message_process (uint8_t *p_message)
	Function for processing ANT events and data received from the ANT-FS channel. More...

void	antfs_channel_setup (void)
	Function for setting up the ANT-FS channel.

uint16_t	crc_crc16_update (uint16_t current_crc, const volatile void *p_data, uint32_t size)
	Function for calculating CRC-16 in blocks. More...

void	leddriver_init (void)
	Function for configuring all the GPIOs needed by the driver.

void	leddriver_led_turn_on (leddriver_led_id_t led_id)
	Function for turning a single led on. More...

void	leddriver_led_turn_off (leddriver_led_id_t led_id)
	Function for turning a single led off. More...

void	leddriver_led_toggle (leddriver_led_id_t led_id)
	Function for toggling a single led. More...

bool	mem_file_write (uint16_t index, uint32_t offset, const void *p_data, uint32_t size)
	Function for writing data to file system. More...

void	mem_file_read (uint16_t index, uint32_t offset, void *p_data, uint32_t size)
	Function for reading data from file system. More...

bool	mem_file_erase (uint16_t index)
	Function for erasing file from file system. More...

bool	mem_file_info_get (uint16_t index, antfs_dir_struct_t *p_file_info)
	Function for retrieving file information from directory. More...

Variables
static const uint8_t	m_friendly_name [] = ANTFS_CLIENT_NAME

static const uint8_t	m_pass_key [] = ANTFS_CLIENT_PASSKEY

static antfs_event_return_t	m_antfs_event

static antfs_dir_struct_t	m_temp_dir_structure

static antfs_request_info_t	m_response_info

static uint16_t	m_file_index

static uint32_t	m_file_offset

static uint16_t	m_current_crc

static bool	m_upload_success

static volatile pairing_state_t	m_pairing_state

Data Structures
union	antfs_beacon_status_byte1_t
	ANT-FS beacon status. More...

struct	antfs_event_return_t
	ANT-FS <-> application event communication object. More...

struct	antfs_params_t
	ANT-FS parameters. More...

struct	antfs_dir_header_t
	ANT-FS directory header. More...

struct	antfs_dir_struct_t
	ANT-FS directory entry. More...

struct	antfs_request_info_t
	ANT-FS download/upload request context. More...

union	ushort_union_t
	uint16_t type presentation as an union. More...

union	ulong_union_t
	uint32_t type presentation as an union. More...

Detailed Description

The ANT-FS client device simulator example illustrates the basic operations of an ANT-FS client.

This example supports all three methods of authentication defined in the ANT-FS specification: pairing, passkey and pass-thru. It also supports the simulation of downloading, uploading and erasing files. Other functionality that is not defined in the ANT-FS specification, such as file system implementation and data decoding/encoding are outside of scope of this implementation.

Note: This example does not implement the client undiscoverable mode as defined by the ANT-FS specification.

The general architecture of the ANT-FS client device simulator is illustrated in the picture below.

ant_fs_embedded_client_device_simulator_architecture.png

Architecture overview

ANT-FS specific configuration options

The following compile time configuration options are available to suite various ANT-FS implementations:

ANTFS_NETWORK_KEY The ANT-FS Network Key.
ANTFS_DEVICE_TYPE The Device Type (Channel ID).
ANTFS_TRANS_TYPE Transmission Type (Channel ID).
ANTFS_LINK_FREQ RF channel frequency of the client device while in the Link layer. The default value is 2450MHz.
ANTFS_BEACON_PERIOD_STATUS Message period of the client device while in the Link layer. The default value is 4 Hz.
ANTFS_LINK_COMMAND_TIMEOUT Time (in seconds) the client device will wait without receiving any commands from the host before switching to the Link layer.
ANTFS_PAIRING_TIMEOUT Time (in seconds) the client will wait for user response to a pairing request during the authentication stage.
ANTFS_CLIENT_SERIAL_NUMBER Serial number of the client device. The device number in the Channel ID is derived from the lower two bytes of the serial number. The four bytes of the serial number are sent to the host during the Authenticate layer as the device ID.
ANTFS_CLIENT_NAME Friendly name of the client device. The length of this string should not exceed ANTFS_REMOTE_FRIENDLY_NAME_MAX.
ANTFS_CLIENT_DEV_TYPE Device Type (ANT-FS Client Identifier).
ANTFS_CLIENT_MANUF_ID Manufacturing ID (ANT-FS Client Identifier).
ANTFS_CLIENT_PASSKEY Passkey used in the pairing and passkey authentication methods. Its length should be equal to ANTFS_PASSKEY_SIZE.

This example implements the pairing, pass key and pass-thru authentication methods, which can be enabled using compile switches. All three authentication methods are enabled by default. Upload functionality can also be enabled through a compile switch and it is by default turned on. The compile switches can be set on antfs.c and are listed below.

ANTFS_AUTH_TYPE_PAIRING Pairing authentication supported.
ANTFS_AUTH_TYPE_PASSKEY Passkey authentication supported.
ANTFS_AUTH_TYPE_PASSTHROUGH Pass-through authentication supported.
ANTFS_INCLUDE_UPLOAD Upload operation is supported.

To establish communication, the host and client devices shall have corresponding configurations. The host device may wish to wildcard any of the fields in the Channel ID and Client Identifier by setting them to zero, but the network key and RF channel frequency shall be the same. The channel period of the client need not match the channel period of the host.

A simple user interface exists consisting of 2 keypad buttons, which are active during pairing authentication for user to accept or reject the authentication, and 2 LEDs which are active during reception of EVENT_TX and pairing authentication mode. LED0 been toggled for every EVENT_TX received from the and stack and LED1 turned on when in pairing authentication mode. The LEDs can be configured in the leddriver.c file.

General operation

The ANT-FS client device simulator executes automatically through each ANT-FS layer, as per the commands received from the ANT-FS host. User interaction is only required when using pairing authentication, to confirm or reject a pairing request.

Once a ANT-FS host detects a client with ANT channel and ANT-FS client parameters matching its search criteria, it will send a Link command to the client, specifying the Link RF channel frequency and channel period. The client will automatically switch to the new frequency and channel period, and indicate in its beacon that it has moved to the Authentication stage.

Authenticate

Once both the ANT-FS client and host are in the authentication layer the host can send a request to client device for pairing. The ANT-FS client example supports three methods of authentication: pairing, passkey and pass-thru. When using the passkey and pass-thru authentication methods, the client will automatically accept or reject the authentication as outlined by the ANT-FS specification. Intervention from the user is only required when using the pairing authentication method. If the client receives a pairing request from the host, it will turn on a LED to let the user know that a host device wishes to pair with it. The user can accept or reject the pairing request by pressing the one of the appropriate buttons. If no response from the user is received before the pairing timeout expires, the request will be rejected.

Download

A sample directory structure is implemented in this example, however, no actual files or file systems are present in the example. The client will send the directory to the host if it receives a request to download the directory (file index0). When the host requests a download for any other files, the client will check if the file exists in its directory, and if there is permission to download that file. If the file can be downloaded, the client will simulate a file by sending sequential data with size matching the requested file size; otherwise, it will reject the download.

Upload

When the host requests an upload, the client will check if the file index exists in its directory, if there is permission to write on that file, and if there is enough space to write the requested data. Once the client sends a response accepting the upload request, the host can start uploading data. The device simulator does not include actual files, so data is not written to memory; however, the client keeps track of the CRC of the received data to verify the integrity of the upload.

Erase

If the client receives a request to erase a file, it will check in its directory to see if the file exists and if there is permission to erase that file. As there are no actual files to delete in this example, if the file can be erased, the client will simply send a response to the host indicating the file was erased; otherwise, it will reject the request.

Development phase configuration options

The ANT-FS client device simulator will trace out ANT-FS protocol state information to UART when AN-FS protocol events occur. The UART peripheral can be configured in simple_uart.c file.

The following compile time configuration options are available to assist in the development phase of the ANT-FS client implementation:

TRACE_MEM_WRITE_OFF When defined tracing the file upload content buffer to UART is disabled.
LEDDRIVER_ACTIVE When defined LED usage is enabled (disabled by default).
TRACE_UART When defined UART trace outputting is enabled (disabled by default).

Note: The ANT-FS Network Key is available for ANT+ Adopters. Please refer to http://thisisant.com to become an ANT+ Adopter and access the key.

Macro Definition Documentation

#define ANT_EVENT_MSG_BUFFER_MIN_SIZE 32u

Minimum size of ANT event message buffer.

#define ANTFS_CLIENT_SERIAL_NUMBER 0xABCDEF12u

Serial number of client device.

#define ANTFS_CLIENT_DEV_TYPE 416u

Beacon device type.

#define ANTFS_CLIENT_MANUF_ID 2u

Beacon manufacturer ID.

#define ANTFS_CLIENT_NAME { "Ref Design" }

Client's friendly name.

#define ANTFS_CLIENT_PASSKEY {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, 0x10}

Client passkey.

#define APP_TIMER_MAX_TIMERS 2u

Maximum number of simultaneously created timers.

#define APP_TIMER_OP_QUEUE_SIZE 4u

Size of timer operation queues.

#define APP_GPIOTE_MAX_USERS 1u

Maximum number of users of the GPIOTE handler.

#define BUTTON_DETECTION_DELAY APP_TIMER_TICKS(50u, APP_TIMER_PRESCALER)

Delay from a GPIOTE event until a button is reported as pushed (in number of timer ticks).

#define ANTFS_VERSION_MAJOR 1u

Version major number.

#define ANTFS_VERSION_MINOR 0

Version minor number.

#define ANTFS_VERSION_ITERATION 0

Version iteration.

#define ANTFS_VERSION_TYPE 'R'

Version type is release.

#define ANTFS_VERSION_SPEC '0.AK'

Version of the ANT-FS Technology Specification.

#define ANTFS_DIR_STRUCT_VERSION 1u

Version of the directory file structure.

#define ANTFS_VERSION_DATE 20090522u

Version date.

#define ANTFS_NETWORK_NUMBER 0

ANT-FS Network Number.

#define ANTFS_CHANNEL 0

ANT Channel Number.

#define ANTFS_LINK_FREQ 50u

RF Frequency (+2400MHz).

#define ANTFS_PAIRING_TIMEOUT 120u

Pairing timeout (time the UI will wait for a response to the pairing request before switching to the link layer, in seconds).

#define ANTFS_LINK_COMMAND_TIMEOUT 10u

Command timeout (time the client will wait without receiving any commands before switching to the link layer, in seconds).

#define ANTFS_TRANS_TYPE 5u

ANT-FS Transmission Type.

#define ANTFS_DEVICE_TYPE 1u

ANT-FS Device Type.

#define ANTFS_CHANNEL_TYPE CHANNEL_TYPE_MASTER

ANT-FS Client Channel Type.

#define ANTFS_BEACON_PERIOD_STATUS BEACON_PERIOD_4_HZ

ANT-FS Beacon Message Period.

#define ANTFS_TRANSMIT_POWER 3u

ANT Transmit Power (0dBm).

#define ANTFS_AUTH_STRING_MAX 255u

Maximum size of authentication strings (passkey/friendly name).

#define ANTFS_PASSKEY_SIZE 16u

Passkey size.

#define ANTFS_FRIENDLY_NAME_MAX 16u

Maximum size of friendly name received from host.

#define ANTFS_REMOTE_FRIENDLY_NAME_MAX 16u

Maximum size of client's friendly name.

#define BEACON_PERIOD_SHIFT 0x00

Shift value for masking out beacon period.

#define BEACON_PERIOD_MASK (0x07u << BEACON_PERIOD_SHIFT)

Beacon period bitmask.

#define BEACON_PERIOD_0_5_HZ (0x00 << BEACON_PERIOD_SHIFT)

Value for 0,5Hz beacon period.

#define BEACON_PERIOD_1_HZ (0x01u << BEACON_PERIOD_SHIFT)

Value for 1Hz beacon period.

#define BEACON_PERIOD_2_HZ (0x02u << BEACON_PERIOD_SHIFT)

Value for 2Hz beacon period.

#define BEACON_PERIOD_4_HZ (0x03u << BEACON_PERIOD_SHIFT)

Value for 4Hz beacon period.

#define BEACON_PERIOD_8_HZ (0x04u << BEACON_PERIOD_SHIFT)

Value for 8Hz beacon period.

#define PAIRING_AVAILABLE_FLAG_SHIFT 0x03u

Shift value for masking out pairing enabled bit.

#define PAIRING_AVAILABLE_FLAG_MASK (0x01u << PAIRING_AVAILABLE_FLAG_SHIFT)

Pairing enabled bitmask.

#define UPLOAD_ENABLED_FLAG_SHIFT 0x04u

Shift value for masking out upload enabled bit.

#define UPLOAD_ENABLED_FLAG_MASK (0x01u << UPLOAD_ENABLED_FLAG_SHIFT)

Upload enabled bitmask.

#define DATA_AVAILABLE_FLAG_SHIFT 0x05u

Shift value for masking out data available bit.

#define DATA_AVAILABLE_FLAG_MASK (0x01u << DATA_AVAILABLE_FLAG_SHIFT)

Data available bitmask.

#define ANTFS_PAIRING_BIT 0x00u

Build pairing disabled default beacon setting.

#define ANTFS_UPLOAD_BIT 0x00u

Build upload disabled default beacon setting.

#define ANTFS_DEFAULT_BEACON (ANTFS_BEACON_PERIOD_STATUS | ANTFS_UPLOAD_BIT | ANTFS_PAIRING_BIT | DATA_AVAILABLE_FLAG_MASK)

Define the default beacon setting.

#define RESPONSE_MESSAGE_OK 0x00u

Download request ok.

#define RESPONSE_MESSAGE_NOT_EXIST 0x01u

File does not exist.

#define RESPONSE_MESSAGE_NOT_AVAILABLE 0x02u

File can not be read/written to (download/upload respectively).

#define RESPONSE_MESSAGE_NOT_READY 0x03u

Not ready to download.

#define RESPONSE_INVALID_OPERATION 0x04u

Request invalid.

#define RESPONSE_INVALID_CRC 0x05u

CRC incorrect.

#define RESPONSE_MESSAGE_NOT_ENOUGH_SPACE 0x03u

Not enough space to to complete write.

#define RESPONSE_MESSAGE_FAIL 0x01u

Data File Index does not exist / Erase failed.

#define ANTFS_DIR_READ_MASK 0x80u

Read (can download).

#define ANTFS_DIR_WRITE_MASK 0x40u

Write (can upload).

#define ANTFS_DIR_ERASE_MASK 0x20u

Erase (can erase).

#define ANTFS_DIR_ARCHIVE_MASK 0x10u

Archive (has been downloaded).

#define ANTFS_DIR_APPEND_MASK 0x08u

Append (can append to file only).

#define ANTFS_MAX_FILE_SIZE 0xFFFFFFFFu

Maximum file size, as specified by directory structure.

#define ANTFS_BURST_BLOCK_SIZE 20u

Size of each block of burst data that the client attempts to send when it processes a data request event.

#define MAX_ULONG 0xFFFFFFFFu

The Max value for the type.

#define APP_TIMER_PRESCALER 0

Value of the RTC1 PRESCALER register.

Enumeration Type Documentation

enum pairing_state_t

Enumerator
PAIRING_OFF	Pairing state not active.
PAIRING_ACCEPT	Pairing accept.
PAIRING_DENY	Pairing deny.
PAIRING_OFF	Pairing state not active.
PAIRING_ACCEPT	Pairing accept.
PAIRING_DENY	Pairing deny.

enum antfs_state_t

Enumerator
ANTFS_STATE_OFF	Off state.
ANTFS_STATE_INIT	Init state.
ANTFS_STATE_LINK	Link state.
ANTFS_STATE_AUTH	Authenticate state.
ANTFS_STATE_TRANS	Transport state.
ANTFS_STATE_OFF	Off state.
ANTFS_STATE_INIT	Init state.
ANTFS_STATE_LINK	Link state.
ANTFS_STATE_AUTH	Authenticate state.
ANTFS_STATE_TRANS	Transport state.

enum antfs_link_substate_t

Enumerator
ANTFS_LINK_SUBSTATE_NONE	None state.
ANTFS_LINK_SUBSTATE_NONE	None state.

enum antfs_authenticate_substate_t

Enumerator
ANTFS_AUTH_SUBSTATE_NONE	None state.
ANTFS_AUTH_SUBSTATE_PAIR	Pairing state.
ANTFS_AUTH_SUBSTATE_PASSKEY	Passkey state.
ANTFS_AUTH_SUBSTATE_ACCEPT	Authenticate accept state.
ANTFS_AUTH_SUBSTATE_REJECT	Authenticate reject state.
ANTFS_AUTH_SUBSTATE_NONE	None state.
ANTFS_AUTH_SUBSTATE_PAIR	Pairing state.
ANTFS_AUTH_SUBSTATE_PASSKEY	Passkey state.
ANTFS_AUTH_SUBSTATE_ACCEPT	Authenticate accept state.
ANTFS_AUTH_SUBSTATE_REJECT	Authenticate reject state.

enum antfs_transport_substate_t

Enumerator
ANTFS_TRANS_SUBSTATE_NONE	None state.
ANTFS_TRANS_SUBSTATE_VERIFY_CRC	Verify CRC state.
ANTFS_TRANS_SUBSTATE_DOWNLOADING	Downloading state.
ANTFS_TRANS_SUBSTATE_UPLOAD_WAIT_FOR_DATA	Wait for upload data request state.
ANTFS_TRANS_SUBSTATE_UPLOADING	Ready / receiving upload data state.
ANTFS_TRANS_SUBSTATE_UPLOAD_RESUME	RX failure upon receiving upload data state.
ANTFS_TRANS_SUBSTATE_NONE	None state.
ANTFS_TRANS_SUBSTATE_VERIFY_CRC	Verify CRC state.
ANTFS_TRANS_SUBSTATE_DOWNLOADING	Downloading state.
ANTFS_TRANS_SUBSTATE_UPLOAD_WAIT_FOR_DATA	Wait for upload data request state.
ANTFS_TRANS_SUBSTATE_UPLOADING	Ready / receiving upload data state.
ANTFS_TRANS_SUBSTATE_UPLOAD_RESUME	RX failure upon receiving upload data state.

enum antfs_event_t

Enumerator
ANTFS_EVENT_PAIRING_REQUEST	Pairing request event.
ANTFS_EVENT_PAIRING_TIMEOUT	Pairing timeout event.
ANTFS_EVENT_OPEN_COMPLETE	Channel setup complete event.
ANTFS_EVENT_CLOSE_COMPLETE	Channel closed event.
ANTFS_EVENT_LINK	Enter link layer event.
ANTFS_EVENT_AUTH	Enter authenticate layer event.
ANTFS_EVENT_TRANS	Enter transport layer event.
ANTFS_EVENT_DOWNLOAD_REQUEST	Download request event.
ANTFS_EVENT_DOWNLOAD_REQUEST_DATA	Download request data event.
ANTFS_EVENT_DOWNLOAD_START	Download started event.
ANTFS_EVENT_DOWNLOAD_COMPLETE	Download completed event.
ANTFS_EVENT_DOWNLOAD_FAIL	Download failed event.
ANTFS_EVENT_UPLOAD_REQUEST	Upload request event.
ANTFS_EVENT_UPLOAD_DATA	Upload data available for read event.
ANTFS_EVENT_UPLOAD_START	Upload begin event.
ANTFS_EVENT_UPLOAD_COMPLETE	Upload completed event.
ANTFS_EVENT_UPLOAD_FAIL	Upload process failed event.
ANTFS_EVENT_ERASE_REQUEST	Erase request event.
ANTFS_EVENT_PAIRING_REQUEST	Pairing request event.
ANTFS_EVENT_PAIRING_TIMEOUT	Pairing timeout event.
ANTFS_EVENT_OPEN_COMPLETE	Channel setup complete event.
ANTFS_EVENT_CLOSE_COMPLETE	Channel closed event.
ANTFS_EVENT_LINK	Enter link layer event.
ANTFS_EVENT_AUTH	Enter authenticate layer event.
ANTFS_EVENT_TRANS	Enter transport layer event.
ANTFS_EVENT_DOWNLOAD_REQUEST	Download request event.
ANTFS_EVENT_DOWNLOAD_REQUEST_DATA	Download request data event.
ANTFS_EVENT_DOWNLOAD_START	Download started event.
ANTFS_EVENT_DOWNLOAD_COMPLETE	Download completed event.
ANTFS_EVENT_DOWNLOAD_FAIL	Download failed event.
ANTFS_EVENT_UPLOAD_REQUEST	Upload request event.
ANTFS_EVENT_UPLOAD_DATA	Upload data available for read event.
ANTFS_EVENT_UPLOAD_START	Upload begin event.
ANTFS_EVENT_UPLOAD_COMPLETE	Upload completed event.
ANTFS_EVENT_UPLOAD_FAIL	Upload process failed event.
ANTFS_EVENT_ERASE_REQUEST	Erase request event.

enum leddriver_led_id_t

Enumerator
LED_ID_0	Led 0 ID.
LED_ID_1	Led 1 ID.
LED_ID_0	Led 0 ID.
LED_ID_1	Led 1 ID.

Function Documentation

void softdevice_assert_callback	(	uint32_t	pc,
		uint16_t	line_num,
		const uint8_t *	p_file_name
	)

Traces out the user supplied parameters and busy loops.

Parameters

[in]	pc	Value of the program counter.
[in]	line_num	Line number where the assert occurred.
[in]	p_file_name	Pointer to the file name.

void app_error_handler	(	uint32_t	error_code,
		uint32_t	line_num,
		const uint8_t *	p_file_name
	)

Function for error handling, which is called when an error has occurred.

Parameters

[in]	error_code	Error code supplied to the handler.
[in]	line_num	Line number where the error occurred.
[in]	p_file_name	Pointer to the file name.

void PROTOCOL_EVENT_IRQHandler ( void )

Interrupt is generated by the ANT stack upon sending event to the application.

static void event_download_request_handle ( const antfs_event_return_t * p_event )

static

Parameters