nRF51 SDK
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
nRF6350 Radio Configuration Example

Modules

 main.c
 nRF6350 Radio Configuration Example Application main file.
 

Detailed Description

The nRF6350 Radio Configuration Example shows how to use nRF6350 Display with TWI interface to see all the configurations with the radio and change its state/variables using the joystick on board. It uses the hardware delivered in the nRF51822 Development Kit.

The different Radio options provided in this application are:

Note
When the value of selection is changed in edit mode, its value is taken into effect immediately and the change in the radio spectrum with changed value can be noticed in the spectrometer.

Setup

Instructions on how to set up the nRFgo Motherboard: nRFgo Motherboard Setup (nRF6310).

Use the nRF6350 Display and joystick to maneuver through the Radio options.
Menu and configuration of radio variables:

Testing

The nRF6350 Radio Configuration Example Application can be tested as follows:

  1. Compile and program the application.
  2. Use the joystick to browse through the menu options.
  3. Use a spectrum analyzer to confirm the behavior of the Radio module.