Bluetooth: HCI IPC

Overview

This sample exposes Bluetooth Controller support to another device or CPU using IPC subsystem.

Requirements

  • A board with IPC subsystem and Bluetooth LE support

Building and Running

This sample can be found under samples/bluetooth/hci_ipc in the Zephyr tree.

To use this application, you need a board with a Bluetooth controller and IPC support. You can then build this application and flash it onto your board in the usual way. See Supported Boards for board-specific building and programming information.

To test this sample, you need a separate device/CPU that acts as Bluetooth HCI IPC peer. This sample is compatible with the HCI IPC driver provided by Zephyr’s Bluetooth HCI Drivers core. See the CONFIG_BT_HCI_IPC configuration option for more information.

You might need to adjust the Kconfig configuration of this sample to make it compatible with the peer application. For example, CONFIG_BT_MAX_CONN must be equal to the maximum number of connections supported by the peer application.

Refer to Bluetooth samples for general information about Bluetooth samples.