Bluetooth: Peripheral ISO

Overview

This sample demonstrates how to use isochronous channels as a peripheral. The sample starts advertising, waits for a central to connect to it and set up an isochronous channel. Once the isochronous channel is set up, received isochronous data is printed out. It is recommended to run this sample together with the Bluetooth: Central ISO sample.

Requirements

  • BlueZ running on the host, or

  • A board with Bluetooth Low Energy 5.2 support

  • A Bluetooth Controller and board that supports setting CONFIG_BT_CTLR_PERIPHERAL_ISO=y

Building and Running

This sample can be found under samples/bluetooth/peripheral_iso in the Zephyr tree.

  1. Start the application. In the terminal window, check that it is advertising.

    Bluetooth initialized Advertising successfully started

  2. Observe that the central device connects and sets up an isochronous channel.

    Connected E8:DC:8D:B3:47:69 (random) Incoming request from 0x20002260 ISO Channel 0x20000698 connected

  3. Observe that incoming data is printed.

    Incoming data channel 0x20000698 len 1

    00

    Incoming data channel 0x20000698 len 2

    0001

    Incoming data channel 0x20000698 len 3

    000102

    Incoming data channel 0x20000698 len 4

    00010203

    Incoming data channel 0x20000698 len 5

    0001020304

    Incoming data channel 0x20000698 len 6

    000102030405

    Incoming data channel 0x20000698 len 7

    000102…040506

    Incoming data channel 0x20000698 len 8

    000102…050607

    Incoming data channel 0x20000698 len 9

    000102…060708

    Incoming data channel 0x20000698 len 10

    000102…070809

    Incoming data channel 0x20000698 len 11

    000102…08090a

    Incoming data channel 0x20000698 len 12

    000102…090a0b

See bluetooth samples section for more details.