TFM Integration Samples

Trusted Firmware-M (TF-M)


These TF-M integration examples can be used with a supported Armv8-M board, and demonstrate how the TF-M APIs can be used with Zephyr.

Trusted Firmware Platform Security Architecture (PSA) APIs are used for the secure processing environment (S), with Zephyr running in the non-secure processing environment (NS).

As part of the standard build process, the secure bootloader (BL2) is normally built, in addition to the TF-M S and Zephyr NS binary images. The S and NS images are then merged and signed using the private signing keys, whose public key values are stored in the secure bootloader. This allows the application images to be verified and either accepted or rejected during the image verification process at startup, based on a pair of private keys that you control.

What is Trusted Firmware-M (TF-M)?

Trusted Firmware-M (TF-M) is the reference implementation of Platform Security Architecture (PSA).

TF-M provides a highly configurable set of software components to create a Trusted Execution Environment. This is achieved by a set of secure run time services such as Secure Storage, Cryptography, Audit Logs and Attestation. Additionally, secure boot in TF-M ensures integrity of run time software and supports firmware upgrade.

The current TF-M implementation specifically targets TrustZone for ARMv8-M.

Trusted Firmware M source code is available at, although a fork of this source code is maintained by the Zephyr Project as a module for convenience sake at

For further information consult the official TF-M documentation

TF-M Requirements

The following Python modules are required when building TF-M binaries:

  • cryptography

  • pyasn1

  • pyyaml

  • cbor>=1.0.0

You can install them via:

$ pip3 install --user cryptography pyasn1 pyyaml cbor>=1.0.0

They are used by TF-M’s signing utility to prepare firmware images for validation by the bootloader.

Part of the process of generating binaries for QEMU and merging signed secure and non-secure binaries on certain platforms also requires the use of the srec_cat utility.

This can be installed on Linux via:

$ sudo apt-get install srecord

And on OS X via:

$ brew install srecord

For Windows-based systems, please make sure you have a copy of the utility available on your system path. See, for example: SRecord for Windows

Signing Images

TF-M uses a secure bootloader (BL2) and firmware images must be signed with a private key. The firmware image is validated by the bootloader at startup using the corresponding public key, which is stored inside the secure bootloader firmware image.

By default, tfm/bl2/ext/mcuboot/root-rsa-3072.pem is used to sign secure images, and tfm/bl2/ext/mcuboot/root-rsa-3072_1.pem is used to sign non-secure images. Theses default .pem keys keys can be overridden using the CONFIG_TFM_KEY_FILE_S and CONFIG_TFM_KEY_FILE_NS values.

The script from TF-M signs the TF-M + Zephyr binary using the .pem private key..

To satisfy PSA Certified Level 1 requirements, You MUST replace the default .pem file with a new key pair!

To generate a new public/private key pair, run the following commands:

$ cd $ZEPHYR_BASE/../modules/tee/tfm/trusted-firmware-m/bl2/ext/mcuboot/scripts
$ chmod +x
$ ./ keygen -k root-rsa-3072.pem -t rsa-3072
$ ./ keygen -k root-rsa-3072_1.pem -t rsa-3072

You can then replace the .pem file in [TF-M_PATH]/bl2/ext/mcuboot/ with the newly generated .pem files, and rebuild the bootloader so that it uses the public key extracted from this new key file when validating firmware images.

Alternatively, place the new .pem files in an alternate location, such as your Zephyr application folder, and reference them in the prj.conf file via the CONFIG_TFM_KEY_FILE_S and CONFIG_TFM_KEY_FILE_NS config values.


Be sure to keep your private key file in a safe, reliable location! If you lose this key file, you will be unable to sign any future firmware images, and it will no longer be possible to update your devices in the field!