Data Structures
struct	zb_zdo_mgmt_bind_param_s
	Parameters for Mgmt_Bind_req. More...

struct	zb_zdo_mgmt_bind_req_s
	Request for Mgmt_Bind_req. More...

struct	zb_zdo_mgmt_bind_resp_s
	Response for Mgmt_Bind_rsp. More...

struct	zb_zdo_binding_table_record_s
	BindingTableList Record Format for mgmt_bind_resp. See ZB spec, Table 2.131. More...

struct	zb_zdo_bind_req_param_s
	Parameters for Bind_req API call. More...

struct	zb_zdo_bind_req_head_s
	Bind_req request head send to the remote. More...

struct	zb_zdo_bind_req_tail_1_s
	Bind_req request tail 1st variant send to the remote. More...

struct	zb_zdo_bind_req_tail_2_s
	Bind_req request tail 2nd variant send to the remote. More...

struct	zb_zdo_bind_resp_s
	Response by BibdReq. More...

struct	zb_zdo_end_device_bind_req_head_s
	End_Device_Bind_req command head. More...

struct	zb_zdo_end_device_bind_req_tail_s
	End_Device_Bind_req command head. More...

struct	zb_end_device_bind_req_param_s
	Parameters for End_Device_Bind_req. More...

struct	zb_zdo_end_device_bind_resp_s
	Response from End_Device_Bind_req. More...

Typedefs
typedef enum zb_bind_dst_addr_mode_e	zb_bind_dst_addr_mode_t
	The addressing mode for the destination address used in zb_zdo_binding_table_record_s, zb_zdo_bind_req_param_s, zb_zdo_bind_req_head_s command. This field can take one of the non-reserved values from the list zb_bind_dst_addr_mode_e. Values 0x00, 0x02, 0x04-0xff are reserved. More...

typedef struct zb_zdo_mgmt_bind_param_s	zb_zdo_mgmt_bind_param_t
	Parameters for Mgmt_Bind_req. More...

typedef struct zb_zdo_mgmt_bind_req_s	zb_zdo_mgmt_bind_req_t
	Request for Mgmt_Bind_req. More...

typedef struct zb_zdo_mgmt_bind_resp_s	zb_zdo_mgmt_bind_resp_t
	Response for Mgmt_Bind_rsp. More...

typedef struct zb_zdo_binding_table_record_s	zb_zdo_binding_table_record_t
	BindingTableList Record Format for mgmt_bind_resp. See ZB spec, Table 2.131.

typedef struct zb_zdo_bind_req_param_s	zb_zdo_bind_req_param_t
	Parameters for Bind_req API call. More...

typedef struct zb_zdo_bind_req_head_s	zb_zdo_bind_req_head_t
	Bind_req request head send to the remote. More...

typedef struct zb_zdo_bind_req_tail_1_s	zb_zdo_bind_req_tail_1_t
	Bind_req request tail 1st variant send to the remote. More...

typedef struct zb_zdo_bind_req_tail_2_s	zb_zdo_bind_req_tail_2_t
	Bind_req request tail 2nd variant send to the remote. More...

typedef struct zb_zdo_bind_resp_s	zb_zdo_bind_resp_t
	Response by BibdReq.

typedef struct zb_zdo_end_device_bind_req_head_s	zb_zdo_end_device_bind_req_head_t
	End_Device_Bind_req command head. More...

typedef struct zb_zdo_end_device_bind_req_tail_s	zb_zdo_end_device_bind_req_tail_t
	End_Device_Bind_req command head. More...

typedef struct zb_end_device_bind_req_param_s	zb_end_device_bind_req_param_t
	Parameters for End_Device_Bind_req. More...

typedef struct zb_zdo_end_device_bind_resp_s	zb_zdo_end_device_bind_resp_t
	Response from End_Device_Bind_req. More...

Enumerations
enum	zb_bind_dst_addr_mode_e { ZB_BIND_DST_ADDR_MODE_16_BIT_GROUP = 0x01, ZB_BIND_DST_ADDR_MODE_64_BIT_EXTENDED = 0x03 }
	The addressing mode for the destination address used in zb_zdo_binding_table_record_s, zb_zdo_bind_req_param_s, zb_zdo_bind_req_head_s command. This field can take one of the non-reserved values from the list zb_bind_dst_addr_mode_e. Values 0x00, 0x02, 0x04-0xff are reserved. More...

Functions
zb_uint8_t	zb_zdo_mgmt_bind_req (zb_uint8_t param, zb_callback_t cb)
	Sends Mgmt_Bind_req request. More...

void	zdo_mgmt_bind_resp (zb_uint8_t param)
	Sends 2.4.4.3.4 Mgmt_Bind_rsp. More...

zb_uint8_t	zb_zdo_bind_req (zb_uint8_t param, zb_callback_t cb)
	Bind_req request. More...

zb_uint8_t	zb_zdo_unbind_req (zb_uint8_t param, zb_callback_t cb)
	Unbind_req request. More...

zb_bool_t	zb_zdo_find_bind_src (zb_uint8_t src_end, zb_uint16_t cluster_id)
	Checks existence of bind table entries with selected endpoint and cluster ID. More...

zb_uint8_t	zb_end_device_bind_req (zb_uint8_t param, zb_callback_t cb)

Detailed Description

Typedef Documentation

◆ zb_bind_dst_addr_mode_t

typedef enum zb_bind_dst_addr_mode_e zb_bind_dst_addr_mode_t

The addressing mode for the destination address used in zb_zdo_binding_table_record_s, zb_zdo_bind_req_param_s, zb_zdo_bind_req_head_s command. This field can take one of the non-reserved values from the list zb_bind_dst_addr_mode_e. Values 0x00, 0x02, 0x04-0xff are reserved.

See also: ZB Spec, subclause 2.4.3.2.2.

◆ zb_end_device_bind_req_param_t

typedef struct zb_end_device_bind_req_param_s zb_end_device_bind_req_param_t

Parameters for End_Device_Bind_req.

See also: ZB spec, subclause 2.4.3.2.1.

◆ zb_zdo_bind_req_head_t

typedef struct zb_zdo_bind_req_head_s zb_zdo_bind_req_head_t

Bind_req request head send to the remote.

See also: ZB spec, subclause 2.4.3.2.2.

◆ zb_zdo_bind_req_param_t

typedef struct zb_zdo_bind_req_param_s zb_zdo_bind_req_param_t

Parameters for Bind_req API call.

See also: ZB spec, subclause 2.4.3.2.2.

◆ zb_zdo_bind_req_tail_1_t

typedef struct zb_zdo_bind_req_tail_1_s zb_zdo_bind_req_tail_1_t

Bind_req request tail 1st variant send to the remote.

See also: ZB spec, subclause 2.4.3.2.2.

◆ zb_zdo_bind_req_tail_2_t

typedef struct zb_zdo_bind_req_tail_2_s zb_zdo_bind_req_tail_2_t

Bind_req request tail 2nd variant send to the remote.

See also: ZB spec, subclause 2.4.3.2.2.

◆ zb_zdo_end_device_bind_req_head_t

typedef struct zb_zdo_end_device_bind_req_head_s zb_zdo_end_device_bind_req_head_t

End_Device_Bind_req command head.

See also: ZB spec, subclause 2.4.3.2.1.

◆ zb_zdo_end_device_bind_req_tail_t

typedef struct zb_zdo_end_device_bind_req_tail_s zb_zdo_end_device_bind_req_tail_t

End_Device_Bind_req command head.

See also: ZB spec, subclause 2.4.3.2.1.

◆ zb_zdo_end_device_bind_resp_t

typedef struct zb_zdo_end_device_bind_resp_s zb_zdo_end_device_bind_resp_t

Response from End_Device_Bind_req.

See also: ZB spec, subclause 2.4.3.2.1.

◆ zb_zdo_mgmt_bind_param_t

typedef struct zb_zdo_mgmt_bind_param_s zb_zdo_mgmt_bind_param_t

Parameters for Mgmt_Bind_req.

See also: ZB spec, subclause 2.4.3.3.4.

◆ zb_zdo_mgmt_bind_req_t

typedef struct zb_zdo_mgmt_bind_req_s zb_zdo_mgmt_bind_req_t

Request for Mgmt_Bind_req.

See also: ZB spec, subclause 2.4.3.3.4.

◆ zb_zdo_mgmt_bind_resp_t

typedef struct zb_zdo_mgmt_bind_resp_s zb_zdo_mgmt_bind_resp_t

Response for Mgmt_Bind_rsp.

See also: ZB spec, subclause 2.4.4.3.4.

Enumeration Type Documentation

◆ zb_bind_dst_addr_mode_e

enum zb_bind_dst_addr_mode_e

The addressing mode for the destination address used in zb_zdo_binding_table_record_s, zb_zdo_bind_req_param_s, zb_zdo_bind_req_head_s command. This field can take one of the non-reserved values from the list zb_bind_dst_addr_mode_e. Values 0x00, 0x02, 0x04-0xff are reserved.

See also: ZB Spec, subclause 2.4.3.2.2.

Enumerator
ZB_BIND_DST_ADDR_MODE_16_BIT_GROUP	16-bit group address for DstAddress and DstEndp not present
ZB_BIND_DST_ADDR_MODE_64_BIT_EXTENDED	64-bit extended address for DstAddress and DstEndp present

Function Documentation

◆ zb_end_device_bind_req()

zb_uint8_t zb_end_device_bind_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

sends 2.4.3.2.1 End_Device_Bind_req command

Parameters

param	- index of buffer with request
cb	- user's function to call when got response from the remote.

Returns: ZDP transaction sequence number or; 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

◆ zb_zdo_bind_req()

zb_uint8_t zb_zdo_bind_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

Bind_req request.

Parameters

param	- index of buffer with request. zb_apsme_binding_req_s
cb	- user's function to call when got response from the remote. zb_zdo_bind_resp_s

Returns: ZDP transaction sequence number; 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

{
  zb_apsme_binding_req_t *req;
  req = ZB_BUF_GET_PARAM(buf, zb_apsme_binding_req_t);
  ZB_MEMCPY(&req->src_addr, &g_ieee_addr, sizeof(zb_ieee_addr_t));
  req->src_endpoint = i;
  req->clusterid = 1;
  req->addr_mode = ZB_APS_ADDR_MODE_64_ENDP_PRESENT;
  ZB_MEMCPY(&req->dst_addr.addr_long, &g_ieee_addr_d, sizeof(zb_ieee_addr_t));
  req->dst_endpoint = 240;
  zb_zdo_bind_req(ZB_REF_FROM_BUF(buf), zb_bind_callback);
  ret = buf->u.hdr.status;
  if (ret == RET_TABLE_FULL)
  {
    TRACE_MSG(TRACE_ERROR, "TABLE FULL %d", (FMT__D, ret));
  }
}
void zb_bind_callback(zb_uint8_t param)
{
  zb_ret_t ret = RET_OK;
  zb_bufid_t buf = (zb_bufid_t )ZB_BUF_FROM_REF(param);
  zb_uint8_t *aps_body = NULL;
  aps_body = zb_buf_begin(buf);
  ZB_MEMCPY(&ret, aps_body, sizeof(ret));
  TRACE_MSG(TRACE_INFO1, "zb_bind_callback %hd", (FMT__H, ret));
  if (ret == RET_OK)
  {
    // bind ok
  }
}

See tp_zdo_bv-12 sample

◆ zb_zdo_find_bind_src()

zb_bool_t zb_zdo_find_bind_src	(	zb_uint8_t	src_end,
		zb_uint16_t	cluster_id
	)

Checks existence of bind table entries with selected endpoint and cluster ID.

Parameters

src_end	- source endpoint
cluster_id	- source cluster ID

Returns: ZB_TRUE if binding is found on given endpoint, ZB_FALSE otherwise

◆ zb_zdo_mgmt_bind_req()

zb_uint8_t zb_zdo_mgmt_bind_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

Sends Mgmt_Bind_req request.

Parameters

param	reference to the buffer to put request data to.
cb	callback to be called on operation finish.

Returns: ZDP transaction sequence number; 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

See zdo_binding sample

◆ zb_zdo_unbind_req()

zb_uint8_t zb_zdo_unbind_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

Unbind_req request.

Parameters

param	- index of buffer with request. zb_zdo_bind_req_param_s
cb	- user's function to call when got response from the remote. zb_zdo_bind_resp_s

Returns: ZDP transaction sequence number; 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

{
  zb_bufid_t buf = ZB_BUF_FROM_REF(param);
  zb_zdo_bind_req_param_t *bind_param;
  TRACE_MSG(TRACE_COMMON1, "unbind_device_1", (FMT__0));
  zb_buf_initial_alloc(buf, 0);
  bind_param = ZB_BUF_GET_PARAM(buf, zb_zdo_bind_req_param_t);
  ZB_MEMCPY(bind_param->src_address, g_ieee_addr_ed1, sizeof(zb_ieee_addr_t));
  bind_param->src_endp = TEST_ED1_EP;
  bind_param->cluster_id = TP_BUFFER_TEST_REQUEST_CLID;
  bind_param->dst_addr_mode = ZB_APS_ADDR_MODE_64_ENDP_PRESENT;
  ZB_MEMCPY(bind_param->dst_address.addr_long, g_ieee_addr_ed2, sizeof(zb_ieee_addr_t));
  bind_param->dst_endp = TEST_ED2_EP;
  bind_param->req_dst_addr = zb_address_short_by_ieee(g_ieee_addr_ed1);
  TRACE_MSG(TRACE_COMMON1, "dst addr %d", (FMT__D, bind_param->req_dst_addr));
  zb_zdo_unbind_req(param, unbind_device1_cb);
}
void unbind_device1_cb(zb_uint8_t param)
{
  zb_bufid_t buf = ZB_BUF_FROM_REF(param);
  zb_zdo_bind_resp_t *bind_resp = (zb_zdo_bind_resp_t*)zb_buf_begin(buf);
  TRACE_MSG(TRACE_COMMON1, "unbind_device1_cb resp status %hd", (FMT__H, bind_resp->status));
  if (bind_resp->status != ZB_ZDP_STATUS_SUCCESS)
  {
    TRACE_MSG(TRACE_COMMON1, "Error bind device 1. Test status failed", (FMT__0));
  }
  zb_free_buf(buf);
}

See tp_aps_bv-23-i, tp_zdo_bv-12 samples

◆ zdo_mgmt_bind_resp()

void zdo_mgmt_bind_resp ( zb_uint8_t param )

Sends 2.4.4.3.4 Mgmt_Bind_rsp.

Parameters

param - index of buffer with Mgmt_Bind request

Data Structures

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

◆ zb_bind_dst_addr_mode_t

◆ zb_end_device_bind_req_param_t

◆ zb_zdo_bind_req_head_t

◆ zb_zdo_bind_req_param_t

◆ zb_zdo_bind_req_tail_1_t

◆ zb_zdo_bind_req_tail_2_t

◆ zb_zdo_end_device_bind_req_head_t

◆ zb_zdo_end_device_bind_req_tail_t

◆ zb_zdo_end_device_bind_resp_t

◆ zb_zdo_mgmt_bind_param_t

◆ zb_zdo_mgmt_bind_req_t

◆ zb_zdo_mgmt_bind_resp_t

Enumeration Type Documentation

◆ zb_bind_dst_addr_mode_e

Function Documentation

◆ zb_end_device_bind_req()

◆ zb_zdo_bind_req()

◆ zb_zdo_find_bind_src()

◆ zb_zdo_mgmt_bind_req()

◆ zb_zdo_unbind_req()

◆ zdo_mgmt_bind_resp()