APS functions visible to applications

Modules
	APS common constants
	APS data service
	APS management service
	APS user payload

Data Structures
struct	zb_intrp_data_req_s
	INTRP-DATA.request structure. More...
struct	zb_intrp_data_ind_s
	INTRP-DATA.indication parameters. More...
struct	zb_mchan_intrp_data_confirm_s
	A multi-channel INTRP-DATA.confirm representation structure. More...

Macros
#define	ZB_INTRP_BROADCAST_SHORT_ADDR   0xffffU
	Inter-PAN broadcast short network address.

Typedefs
typedef struct zb_intrp_data_req_s	zb_intrp_data_req_t
	INTRP-DATA.request structure. More...
typedef struct zb_intrp_data_ind_s	zb_intrp_data_ind_t
	INTRP-DATA.indication parameters. More...
typedef struct zb_mchan_intrp_data_confirm_s	zb_mchan_intrp_data_confirm_t
	A multi-channel INTRP-DATA.confirm representation structure.
typedef zb_uint8_t(*	zb_af_inter_pan_handler_t) (zb_uint8_t param, zb_uint8_t current_page, zb_uint8_t current_channel)

Enumerations
enum	zb_intrp_addr_mode_e { ZB_INTRP_ADDR_GROUP = 0x01, ZB_INTRP_ADDR_NETWORK = 0x02, ZB_INTRP_ADDR_IEEE = 0x03 }
	Valid values for inter-PAN destination address mode. More...

Functions
void	zboss_enable_interpan_with_chan_change (void)
	Enable interpan procedure. This allows to send interpan frames at multiple channels and register handler to receive interpan frames.
zb_ret_t	zb_intrp_data_request_with_chan_change (zb_bufid_t buffer, zb_channel_page_t channel_page_mask, zb_uint32_t chan_wait_ms, zb_callback_t cb)
	Make INTRP-DATA request at multiple channels with time given as chan_wait_ms to wait for response packets. Can be used after zboss_enable_interpan_with_chan_change() was called. More...
void	zb_af_interpan_set_data_indication (zb_af_inter_pan_handler_t cb)
	Register inter-pan indication callback, called when inter-pan packet is received. Can be used after zboss_enable_interpan_with_chan_change() was called. More...
void	zb_intrp_data_request (zb_uint8_t param)
	Make INTRP-DATA request. More...

Detailed Description

Typedef Documentation

zb_af_inter_pan_handler_t

typedef zb_uint8_t(* zb_af_inter_pan_handler_t) (zb_uint8_t param, zb_uint8_t current_page, zb_uint8_t current_channel)

Inter-pan packet handler

Parameters

param	- index of buffer with inter-pan packet command
current_page	- channel page at which packet was received
current_channel	- channel at which packet was received

Returns

status (see zb_bool_t)

zb_intrp_data_ind_t

typedef struct zb_intrp_data_ind_s zb_intrp_data_ind_t

INTRP-DATA.indication parameters.

See also

SE spec, subclause B.3.3.

zb_intrp_data_req_t

typedef struct zb_intrp_data_req_s zb_intrp_data_req_t

INTRP-DATA.request structure.

This structure passed to zb_intrp_data_request() in the packet buffer parameter.

See also

SE spec, clause B.3.

Enumeration Type Documentation

zb_intrp_addr_mode_e

enum zb_intrp_addr_mode_e

Valid values for inter-PAN destination address mode.

See also

SE spec, subclause B.3.1.

Enumerator
ZB_INTRP_ADDR_GROUP	16-bit group address
ZB_INTRP_ADDR_NETWORK	16-bit NWK address
ZB_INTRP_ADDR_IEEE	64-bit extended device address

Function Documentation

zb_af_interpan_set_data_indication()

void zb_af_interpan_set_data_indication

(

zb_af_inter_pan_handler_t

cb

)

Register inter-pan indication callback, called when inter-pan packet is received. Can be used after zboss_enable_interpan_with_chan_change() was called.

Parameters

cb	- callback function to be called when inter-pan packet is received.

Note

If packet is processed in the callback function and no longer shall be processed by the stack, callback function shall free buffer and return RET_OK. Return RET_ERROR otherwise. Buffer has data put in the beginning of the buffer with inter-pan header truncated and contains zb_intrp_data_ind_t given as buffer's parameter.

zb_intrp_data_request()

void zb_intrp_data_request

(

zb_uint8_t

param

)

Make INTRP-DATA request.

Assumes buffer contains data in its main part, and INTRP-DATA.request parameters in buffer's parameter (represented as zb_intrp_data_req_s structure).

Parameters

param

- reference (index) of the packet buffer.

See also

SE spec, subclause B.5.1.

zb_intrp_data_request_with_chan_change()

zb_ret_t zb_intrp_data_request_with_chan_change	(	zb_bufid_t	buffer,
		zb_channel_page_t	channel_page_mask,
		zb_uint32_t	chan_wait_ms,
		zb_callback_t	cb
	)

Make INTRP-DATA request at multiple channels with time given as chan_wait_ms to wait for response packets. Can be used after zboss_enable_interpan_with_chan_change() was called.

Assumes buffer contains data in its main part, and INTRP-DATA.request parameters in buffer's parameter (represented as zb_intrp_data_req_s structure).

Parameters

buffer	- reference (index) of the packet buffer.
channel_page_mask	- Channel Page structure - binary encoded channel page and channels mask as list of channels to send packet at.
chan_wait_ms	- time in miliseconds to wait at channel after the packet is sent.
cb	- user callback function called after the procedure is finished.

Returns

Returns RET_OK if procedure has started successfully, RET_BUSY if procedure is on-going, RET_ERROR if failed to start or procedure was not enabled, RET_INVALID_PARAMETER if one of function's arguments is invalid.

Note

cb buffer's parameter contains status which can be obtained using zb_buf_get_status function, RET_OK if packet was successfully sent at at least one channel, RET_ERROR otherwise. zb_mchan_intrp_data_confirm_t is put as buffer's parameter. User is to free the buffer in the callback, if no callback is given, buffer is freed internally.