Remove Group command definitions

Data Structures
struct	zb_zcl_groups_remove_group_req_s
	Remove Group command structure. More...
struct	zb_zcl_groups_remove_group_res_s
	Remove group response command structure. More...

Macros
#define	ZB_ZCL_GROUPS_GET_REMOVE_GROUP_REQ(data_buf, rem_group_req)
	Parses Remove group command and fills in data request structure. If request contains invalid data, ZB_ZCL_NULL_ID is stored as group_id. More...
#define	ZB_ZCL_GROUPS_GET_REMOVE_GROUP_RES(data_buf, rem_group_res)
	Parses Remove group response command and returns response data structure or NULL if request contains invalid data. More...
#define	ZB_ZCL_GROUPS_SEND_REMOVE_GROUP_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, group_id)
	Send Remove group command. More...

Typedefs
typedef struct zb_zcl_groups_remove_group_req_s	zb_zcl_groups_remove_group_req_t
	Remove Group command structure.
typedef struct zb_zcl_groups_remove_group_res_s	zb_zcl_groups_remove_group_res_t
	Remove group response command structure.

Detailed Description

Remove Group request and response commands have simple payload. Actual request handling takes place in ZCL internals.

Examples

Remove Group request sending:

 ZB_ZCL_GROUPS_SEND_REMOVE_GROUP_REQ(buffer, DST_ADDR, DST_ADDR_MODE, ENDPOINT_C, ENDPOINT_ED, ZB_AF_HA_PROFILE_ID, ZB_ZCL_ENABLE_DEFAULT_RESPONSE, NULL, TEST_GROUP_ID_2);

Macro Definition Documentation

ZB_ZCL_GROUPS_GET_REMOVE_GROUP_REQ

#define ZB_ZCL_GROUPS_GET_REMOVE_GROUP_REQ	(		data_buf,
			rem_group_req
	)

Value:

{ \
 zb_zcl_groups_remove_group_req_t *rem_group_req_ptr; \
 (rem_group_req_ptr) = zb_buf_len(data_buf) >= ZB_ZCL_REMOVE_GROUP_REQ_SIZE ? \
 (zb_zcl_groups_remove_group_req_t*)zb_buf_begin(data_buf) : NULL; \
 \
 if (rem_group_req_ptr) \
 { \
 ZB_HTOLE16(&(rem_group_req).group_id, &rem_group_req_ptr->group_id); \
 } \
 else \
 { \
 rem_group_req.group_id = ZB_ZCL_NULL_ID; \
 } \
}

Parses Remove group command and fills in data request structure. If request contains invalid data, ZB_ZCL_NULL_ID is stored as group_id.

Parameters

data_buf	- pointer to zb_buf_t buffer containing command request data
rem_group_req	- variable to save command request

Note

data_buf buffer should contain command request payload without ZCL header.

ZB_ZCL_GROUPS_GET_REMOVE_GROUP_RES

#define ZB_ZCL_GROUPS_GET_REMOVE_GROUP_RES	(		data_buf,
			rem_group_res
	)

Value:

{ \
 (rem_group_res) = zb_buf_len(data_buf) >= ZB_ZCL_REMOVE_GROUP_RES_SIZE ? \
 (zb_zcl_groups_remove_group_res_t*)zb_buf_begin(data_buf) : NULL; \
 \
 if (rem_group_res) \
 { \
 ZB_ZCL_HTOLE16_INPLACE(&(rem_group_res)->group_id); \
 } \
}

Parses Remove group response command and returns response data structure or NULL if request contains invalid data.

Parameters

data_buf	- pointer to zb_buf_t buffer containing command response data
rem_group_res	- out pointer to zb_zcl_groups_remove_group_res_t, containing command response record

Note

data_buf buffer should contain response command payload without ZCL header

ZB_ZCL_GROUPS_SEND_REMOVE_GROUP_REQ

#define ZB_ZCL_GROUPS_SEND_REMOVE_GROUP_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			group_id
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, def_resp) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), ZB_ZCL_CMD_GROUPS_REMOVE_GROUP); \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (group_id)); \
 ZB_ZCL_FINISH_PACKET(buffer, ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, ZB_ZCL_CLUSTER_ID_GROUPS, cb); \
}

Send Remove group command.

Parameters

buffer	to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
group_id	- group ID to remove