Help¶

PLL3 multiplier, allowed values: 4-512.

Direct dependencies¶

CLOCK_STM32_PLL3_ENABLE && SOC_SERIES_STM32H7X && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL

(Includes any dependencies from ifs and menus.)

Default¶

129

Kconfig definition¶

At <Zephyr>/drivers/clock_control/Kconfig.stm32h7:123

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:54 → <Zephyr>/drivers/clock_control/Kconfig:25 → <Zephyr>/drivers/clock_control/Kconfig.stm32:153

Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control → Enable PLL3

config CLOCK_STM32_PLL3_N_MULTIPLIER
    int "PLL3 VCO multiplier"
    range 4 512
    default 129
    depends on CLOCK_STM32_PLL3_ENABLE && SOC_SERIES_STM32H7X && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL
    help
      PLL3 multiplier, allowed values: 4-512.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)