nxp,kinetis-acmp¶
Vendor: NXP Semiconductors
Description¶
NXP Kinetis Analog Comparator (ACMP)
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Make the comparator output (CMP0) available on a packaged pin.
|
|
|
Use the unfiltered comparator output for CMP0.
|
|
|
Enable high speed comparison mode.
|
|
|
Enable external sample signal as clock input.
|
|
|
Filter sample count (0 to 7).
|
|
|
Filter sample period in bus clock cycles (0 to 255).
|
|
|
Enable windowing mode.
|
|
|
Constant value: |
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nxp,kinetis-acmp” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
interrupts for device
This property is required. See Important properties for more information. |
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
register space
This property is required. See Important properties for more information. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
name of each register space
|
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
Specifier cell names¶
io-channel cells: positive, negative