nordic,nrf-qspi

Vendor: Nordic Semiconductor

Description

These nodes are “qspi” bus nodes.

Properties defining the interface for the Nordic QSPI peripheral.

Properties

Properties not inherited from the base binding file.

Name

Type

Details

sck-pin

int

 
The SCK pin to use.

For pins P0.0 through P0.31, use the pin number. For example,
to use P0.16 for SCK, set:

    sck-pin = <16>;

For pins P1.0 through P1.31, add 32 to the pin number. For
example, to use P1.2 for SCK, set:

    sck-pin = <34>;  /* 32 + 2 */

This property is required.

io-pins

array

 
Pin numbers associated with IO0 through IO3 signals.

Examples:

    io-pins = <io0-pin io1-pin>; // two pins

    io-pins = <io0-pin io1-pin io2-pin io3-pin>; // four pins

Either two or four pins must be configured using this property
as shown above. The pin numbering scheme is the same as the
sck-pin property's.

This property is required.

csn-pins

array

 
Chip select signal pin number. Exactly one pin should be
given. The pin numbering scheme is the same as the
sck-pin property's.

This property is required.