arduino,uno-adc¶
Vendor: Unknown vendor
Description¶
ADC channels exposed on Arduino Uno (R3) headers.
The Arduino Uno layout provides a 6-pin Analog Input header. This
has analog input signals labeled from A0 at the top through A5 at
the bottom.
This binding provides a nexus mapping for these pins where parent
pins 0 through 5 correspond to A0 through A5.
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in an ADC specifier
This property is required. |
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “arduino,uno-adc” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|