-
CONFIG_UART_PL011_PORT1
¶
Enable driver for UART 1
Type: bool
Help¶
Build the driver to utilize UART controller Port 1.
Direct dependencies¶
(SERIAL
&& BOARD_MUSCA_A
) || (SERIAL
&& BOARD_MUSCA_B1
) || (SERIAL
&& BOARD_MUSCA_S1
) || (SERIAL
&& SOC_EOS_S3
) || (UART_PL011
&& SERIAL
)
(Includes any dependencies from ifs and menus.)
Defaults¶
y
y
y
n
Kconfig definitions¶
At <Zephyr>/boards/arm/v2m_musca/Kconfig.defconfig:31
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config UART_PL011_PORT1 bool default y depends onSERIAL
&&BOARD_MUSCA_A
At <Zephyr>/boards/arm/v2m_musca_b1/Kconfig.defconfig:28
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config UART_PL011_PORT1 bool default y depends onSERIAL
&&BOARD_MUSCA_B1
At <Zephyr>/boards/arm/v2m_musca_s1/Kconfig.defconfig:28
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config UART_PL011_PORT1 bool default y depends onSERIAL
&&BOARD_MUSCA_S1
At <Zephyr>/soc/arm/quicklogic_eos_s3/Kconfig.defconfig:26
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:19
→ <BuildDir>/Kconfig/Kconfig.soc.defconfig:1
Menu path: (Top)
config UART_PL011_PORT1 bool default n depends onSERIAL
&&SOC_EOS_S3
At <Zephyr>/drivers/serial/Kconfig.pl011:18
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:24
→ <Zephyr>/drivers/serial/Kconfig:119
Menu path: (Top) → Device Drivers → Serial Drivers → ARM PL011 UART Driver
config UART_PL011_PORT1 bool "Enable driver for UART 1" depends onUART_PL011
&&SERIAL
help Build the driver to utilize UART controller Port 1.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)