-
CONFIG_SPI_1
¶
SPI port 1
Type: bool
Help¶
Enable SPI controller port 1.
Direct dependencies¶
(SPI_DW
&& SPI
&& BOARD_EM_STARTERKIT
) || (SPI_DW
&& SPI
&& BOARD_HSDK
) || (SPI
&& BOARD_96B_NITROGEN
) || (SPI
&& BOARD_FRDM_K82F
) || (SPI
&& BOARD_HEXIWEAR_K64
) || (SPI_MCUX_LPSPI
&& BOARD_TWR_KE18F
) || (SPI
&& BOARD_USB_KW24D512
) || SPI
(Includes any dependencies from ifs and menus.)
Defaults¶
y
y
y
y
n
y
y
Kconfig definitions¶
At <Zephyr>/boards/arc/em_starterkit/Kconfig.defconfig:65
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI_DW
&&SPI
&&BOARD_EM_STARTERKIT
At <Zephyr>/boards/arc/hsdk/Kconfig.defconfig:39
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI_DW
&&SPI
&&BOARD_HSDK
At <Zephyr>/boards/arm/96b_nitrogen/Kconfig.defconfig:11
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI
&&BOARD_96B_NITROGEN
At <Zephyr>/boards/arm/frdm_k82f/Kconfig.defconfig:37
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI
&&BOARD_FRDM_K82F
At <Zephyr>/boards/arm/hexiwear_k64/Kconfig.defconfig:35
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default n depends onSPI
&&BOARD_HEXIWEAR_K64
At <Zephyr>/boards/arm/twr_ke18f/Kconfig.defconfig:16
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI_MCUX_LPSPI
&&BOARD_TWR_KE18F
At <Zephyr>/boards/arm/usb_kw24d512/Kconfig.defconfig:27
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_1 bool default y depends onSPI
&&BOARD_USB_KW24D512
At <Zephyr>/drivers/spi/Kconfig:56
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:38
Menu path: (Top) → Device Drivers → SPI hardware bus support
config SPI_1
bool "SPI port 1"
depends on SPI
help
Enable SPI controller port 1.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)