-
CONFIG_SPI_0
¶
SPI port 0
Type: bool
Help¶
Enable SPI controller port 0.
Direct dependencies¶
(SPI_DW
&& SPI
&& BOARD_EM_STARTERKIT
) || (SPI_DW
&& SPI
&& BOARD_HSDK
) || (SPI
&& BOARD_FRDM_K22F
) || (SPI
&& BOARD_FRDM_K64F
) || (SPI
&& BOARD_FRDM_KW41Z
) || (SPI
&& BOARD_HEXIWEAR_K64
) || (SPI_XEC_QMSPI
&& SPI
&& BOARD_MEC15XXEVB_ASSY6853
) || (SPI_MCUX_LPSPI
&& BOARD_TWR_KE18F
) || (SPI
&& BOARD_INTEL_S1000_CRB
) || SPI
(Includes any dependencies from ifs and menus.)
Defaults¶
y
y
y
y
y
y
y
y
y
Kconfig definitions¶
At <Zephyr>/boards/arc/em_starterkit/Kconfig.defconfig:62
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI_DW
&&SPI
&&BOARD_EM_STARTERKIT
At <Zephyr>/boards/arc/hsdk/Kconfig.defconfig:36
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI_DW
&&SPI
&&BOARD_HSDK
At <Zephyr>/boards/arm/frdm_k22f/Kconfig.defconfig:23
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI
&&BOARD_FRDM_K22F
At <Zephyr>/boards/arm/frdm_k64f/Kconfig.defconfig:27
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI
&&BOARD_FRDM_K64F
At <Zephyr>/boards/arm/frdm_kw41z/Kconfig.defconfig:24
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI
&&BOARD_FRDM_KW41Z
At <Zephyr>/boards/arm/hexiwear_k64/Kconfig.defconfig:32
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI
&&BOARD_HEXIWEAR_K64
At <Zephyr>/boards/arm/mec15xxevb_assy6853/Kconfig.defconfig:59
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI_XEC_QMSPI
&&SPI
&&BOARD_MEC15XXEVB_ASSY6853
At <Zephyr>/boards/arm/twr_ke18f/Kconfig.defconfig:13
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI_MCUX_LPSPI
&&BOARD_TWR_KE18F
At <Zephyr>/boards/xtensa/intel_s1000_crb/Kconfig.defconfig:156
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config SPI_0 bool default y depends onSPI
&&BOARD_INTEL_S1000_CRB
At <Zephyr>/drivers/spi/Kconfig:39
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:38
Menu path: (Top) → Device Drivers → SPI hardware bus support
config SPI_0
bool "SPI port 0"
depends on SPI
help
Enable SPI controller port 0.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)