-
CONFIG_NRFX_TIMER1
¶
Enable TIMER1 instance
Enable TIMER1 instance
Type: bool
Direct dependencies¶
(HAS_HW_NRF_TIMER1
&& HAS_NRFX
) || (HAS_HW_NRF_TIMER1
&& HAS_NRFX
&& 0) || ((UART_0_NRF_HW_ASYNC_TIMER
= 1 || UART_1_NRF_HW_ASYNC_TIMER
= 1 || UART_3_NRF_HW_ASYNC_TIMER
= 1 || UART_2_NRF_HW_ASYNC_TIMER
= 1) && UART_NRFX
&& SERIAL
)
(Includes any dependencies from ifs and menus.)
Default¶
y
Symbols selected by this symbol¶
Symbols that select this symbol¶
Kconfig definitions¶
At <Zephyr>/modules/hal_nordic/nrfx/Kconfig:258
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:6
→ <BuildDir>/Kconfig/Kconfig.modules:20
→ <Zephyr>/modules/hal_nordic/Kconfig:178
Menu path: (Top) → Modules → hal_nordic (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/hal/nordic) → nrfx drivers
config NRFX_TIMER1 bool "Enable TIMER1 instance" selectNRFX_TIMER
depends onHAS_HW_NRF_TIMER1
&&HAS_NRFX
At <Zephyr>/modules/hal_nordic/nrfx/Kconfig:258
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:23
→ <Zephyr>/modules/Kconfig:59
→ <Zephyr>/modules/hal_nordic/Kconfig:178
Menu path: (Top) → Modules → nrfx drivers
config NRFX_TIMER1 bool "Enable TIMER1 instance" selectNRFX_TIMER
depends onHAS_HW_NRF_TIMER1
&&HAS_NRFX
&& 0
At <Zephyr>/drivers/serial/Kconfig.nrfx:320
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:24
→ <Zephyr>/drivers/serial/Kconfig:93
Menu path: (Top) → Device Drivers → Serial Drivers → nRF UART nrfx drivers
config NRFX_TIMER1 bool default y depends on (UART_0_NRF_HW_ASYNC_TIMER
= 1 ||UART_1_NRF_HW_ASYNC_TIMER
= 1 ||UART_3_NRF_HW_ASYNC_TIMER
= 1 ||UART_2_NRF_HW_ASYNC_TIMER
= 1) &&UART_NRFX
&&SERIAL
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)