-
CONFIG_NET_LLDP_PORT_ID_SUBTYPE
¶
Port ID TLV subtype
Type: int
Help¶
Port ID subtype options are defined below. Please refer to section 8.5.3.2 of the 802.1AB for more info. Subtype 1 = Interface alias Subtype 2 = Port component Subtype 3 = MAC address Subtype 4 = Network address Subtype 5 = Interface name Subtype 6 = Agent circuit ID Subtype 7 = Locally assigned If subtype 3 is selected (MAC address) then configs NET_LLDP_PORT_ID_MAC0 through NET_LLDP_PORT_ID_MAC5 must be defined, otherwise you must use NET_LLDP_PORT_ID instead.
Direct dependencies¶
NET_LLDP
&& NET_L2_ETHERNET
&& NETWORKING
(Includes any dependencies from ifs and menus.)
Default¶
5
Kconfig definition¶
At <Zephyr>/subsys/net/l2/ethernet/lldp/Kconfig:124
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:34
→ <Zephyr>/subsys/Kconfig:37
→ <Zephyr>/subsys/net/Kconfig:85
→ <Zephyr>/subsys/net/l2/Kconfig:69
→ <Zephyr>/subsys/net/l2/ethernet/Kconfig:77
Menu path: (Top) → Sub Systems and OS Services → Networking → Link layer and IP networking support → Link layer options → Enable Ethernet support → Enable Link Layer Discovery Protocol (LLDP)
config NET_LLDP_PORT_ID_SUBTYPE int "Port ID TLV subtype" range 1 7 default 5 depends onNET_LLDP
&&NET_L2_ETHERNET
&&NETWORKING
help Port ID subtype options are defined below. Please refer to section 8.5.3.2 of the 802.1AB for more info. Subtype 1 = Interface alias Subtype 2 = Port component Subtype 3 = MAC address Subtype 4 = Network address Subtype 5 = Interface name Subtype 6 = Agent circuit ID Subtype 7 = Locally assigned If subtype 3 is selected (MAC address) then configs NET_LLDP_PORT_ID_MAC0 through NET_LLDP_PORT_ID_MAC5 must be defined, otherwise you must use NET_LLDP_PORT_ID instead.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)