-
CONFIG_LIS2DW12_PULSE_THSY
¶
Pulse Y-axis threshold
Type: hex
Help¶
Threshold to start the pulse-event detection procedure on the Y-axis. Threshold values for each axis are unsigned 5-bit corresponding to an 2g acceleration full-scale range.
Direct dependencies¶
LIS2DW12_PULSE
&& LIS2DW12_TRIGGER
&& LIS2DW12
&& SENSOR
(Includes any dependencies from ifs and menus.)
Default¶
0x0E
Kconfig definition¶
At <Zephyr>/drivers/sensor/lis2dw12/Kconfig:97
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:62
→ <Zephyr>/drivers/sensor/Kconfig:115
Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection
config LIS2DW12_PULSE_THSY hex "Pulse Y-axis threshold" range 0 0x1F default 0x0E depends onLIS2DW12_PULSE
&&LIS2DW12_TRIGGER
&&LIS2DW12
&&SENSOR
help Threshold to start the pulse-event detection procedure on the Y-axis. Threshold values for each axis are unsigned 5-bit corresponding to an 2g acceleration full-scale range.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)