Help¶

Threshold to start the pulse-event detection procedure on the X-axis. Threshold values for each axis are unsigned 5-bit corresponding to an 2g acceleration full-scale range.

Direct dependencies¶

LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR

(Includes any dependencies from ifs and menus.)

Default¶

0x0E

Kconfig definition¶

At <Zephyr>/drivers/sensor/lis2dw12/Kconfig:88

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:62 → <Zephyr>/drivers/sensor/Kconfig:115

Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection

config LIS2DW12_PULSE_THSX
    hex "Pulse X-axis threshold"
    range 0 0x1F
    default 0x0E
    depends on LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
    help
      Threshold to start the pulse-event detection procedure on the X-axis.
      Threshold values for each axis are unsigned 5-bit corresponding
      to an 2g acceleration full-scale range.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)