CONFIG_LIS2DW12_PULSE_LTNCY

Latency value

Type: hex

Help

When double-tap recognition is enabled, this register expresses the maximum time between two successive detected taps to determine a double-tap event. Where 0 equals 16*1/ODR and 1LSB = 32*1/ODR.

Direct dependencies

LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR

(Includes any dependencies from ifs and menus.)

Default

  • 0x05

Kconfig definition

At <Zephyr>/drivers/sensor/lis2dw12/Kconfig:136

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:32<Zephyr>/drivers/Kconfig:62<Zephyr>/drivers/sensor/Kconfig:115

Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection

config LIS2DW12_PULSE_LTNCY
    hex "Latency value"
    range 0 0x0F
    default 0x05
    depends on LIS2DW12_PULSE && LIS2DW12_TRIGGER && LIS2DW12 && SENSOR
    help
      When double-tap recognition is enabled, this register expresses
      the maximum time between two successive detected taps to
      determine a double-tap event. Where 0 equals 16*1/ODR and
      1LSB = 32*1/ODR.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)