Help¶

Enable the MCUX LPC pinmux driver.

Direct dependencies¶

(GPIO && SOC_MIMXRT685S_CM33 && SOC_SERIES_IMX_RT6XX) || (GPIO && SOC_LPC54114_M0 && SOC_SERIES_LPC54XXX) || (GPIO && SOC_LPC54114_M4 && SOC_SERIES_LPC54XXX) || (GPIO && SOC_LPC55S16 && SOC_SERIES_LPC55XXX) || (GPIO && SOC_LPC55S28 && SOC_SERIES_LPC55XXX) || (GPIO && SOC_LPC55S69_CPU0 && SOC_SERIES_LPC55XXX) || (GPIO && SOC_LPC55S69_CPU1 && SOC_SERIES_LPC55XXX) || (HAS_MCUX && GPIO)

(Includes any dependencies from ifs and menus.)

Defaults¶

y
n
y
y
y
y
y

Kconfig definitions¶

At <Zephyr>/soc/arm/nxp_imx/rt6xx/Kconfig.defconfig.mimxrt685_cm33:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_imx/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_imx/rt6xx/Kconfig.defconfig.series:17

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_MIMXRT685S_CM33 && SOC_SERIES_IMX_RT6XX

At <Zephyr>/soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m0:18

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default n
    depends on GPIO && SOC_LPC54114_M0 && SOC_SERIES_LPC54XXX

At <Zephyr>/soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m4:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_LPC54114_M4 && SOC_SERIES_LPC54XXX

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S16:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_LPC55S16 && SOC_SERIES_LPC55XXX

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S28:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_LPC55S28 && SOC_SERIES_LPC55XXX

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu0:15

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_LPC55S69_CPU0 && SOC_SERIES_LPC55XXX

At <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu1:18

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:19 → <BuildDir>/Kconfig/Kconfig.soc.defconfig:1 → <Zephyr>/soc/arm/nxp_lpc/Kconfig.defconfig:4 → <Zephyr>/soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18

Menu path: (Top)

config GPIO_MCUX_LPC
    bool
    default y
    depends on GPIO && SOC_LPC55S69_CPU1 && SOC_SERIES_LPC55XXX

At <Zephyr>/drivers/gpio/Kconfig.mcux_lpc:6

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:32 → <Zephyr>/drivers/Kconfig:34 → <Zephyr>/drivers/gpio/Kconfig:34

Menu path: (Top) → Device Drivers → GPIO Drivers

menuconfig GPIO_MCUX_LPC
    bool "MCUX LPC GPIO driver"
    depends on HAS_MCUX && GPIO
    help
      Enable the MCUX LPC pinmux driver.

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)