-
CONFIG_FXOS8700
¶
FXOS8700 accelerometer/magnetometer driver
Type: bool
Help¶
Enable driver for the FXOS8700 accelerometer/magnetometer. The driver also supports MMA8451Q, MMA8652FC and MMA8653FC accelerometers. If the driver is used with one of these accelerometers then the Accelerometer-only mode should be selected.”
Defaults¶
No defaults. Implicitly defaults to n
.
Kconfig definition¶
At <Zephyr>/drivers/sensor/fxos8700/Kconfig:6
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:62
→ <Zephyr>/drivers/sensor/Kconfig:83
Menu path: (Top) → Device Drivers → Sensor Drivers
menuconfig FXOS8700 bool "FXOS8700 accelerometer/magnetometer driver" depends onI2C
&&HAS_DTS_GPIO
&&SENSOR
help Enable driver for the FXOS8700 accelerometer/magnetometer. The driver also supports MMA8451Q, MMA8652FC and MMA8653FC accelerometers. If the driver is used with one of these accelerometers then the Accelerometer-only mode should be selected."
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)