-
CONFIG_ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS
¶
I2C 7-bit EEPROM chip address
Type: hex
Help¶
I2C 7-bit address of the EEPROM chip.
Direct dependencies¶
(ETH_SAM_GMAC
&& BOARD_SAM_E70_XPLAINED
) || (ETH_SAM_GMAC
&& BOARD_SAM_V71_XULT
) || (ETH_SAM_GMAC_MAC_I2C_EEPROM
&& ETH_SAM_GMAC
&& NET_L2_ETHERNET
)
(Includes any dependencies from ifs and menus.)
Defaults¶
0x5F
0x5F
Kconfig definitions¶
At <Zephyr>/boards/arm/sam_e70_xplained/Kconfig.defconfig:15
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS hex default 0x5F depends onETH_SAM_GMAC
&&BOARD_SAM_E70_XPLAINED
At <Zephyr>/boards/arm/sam_v71_xult/Kconfig.defconfig:19
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS hex default 0x5F depends onETH_SAM_GMAC
&&BOARD_SAM_V71_XULT
At <Zephyr>/drivers/ethernet/Kconfig.sam_gmac:86
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:20
→ <Zephyr>/drivers/ethernet/Kconfig:51
Menu path: (Top) → Device Drivers → Ethernet Drivers → Atmel SAM Ethernet driver → Read from an I2C EEPROM
config ETH_SAM_GMAC_MAC_I2C_SLAVE_ADDRESS hex "I2C 7-bit EEPROM chip address" range 0 0xff depends onETH_SAM_GMAC_MAC_I2C_EEPROM
&Ð_SAM_GMAC
&&NET_L2_ETHERNET
help I2C 7-bit address of the EEPROM chip.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)