-
CONFIG_ETH_SAM_GMAC_MAC_I2C_DEV_NAME
¶
I2C bus driver device name
Type: string
Help¶
Device name, e.g. I2C_0, of an I2C bus driver device. It is required to obtain handle to the I2C device object.
Direct dependencies¶
(ETH_SAM_GMAC
&& BOARD_SAM_E70_XPLAINED
) || (ETH_SAM_GMAC
&& BOARD_SAM_V71_XULT
) || (ETH_SAM_GMAC_MAC_I2C_EEPROM
&& ETH_SAM_GMAC
&& NET_L2_ETHERNET
)
(Includes any dependencies from ifs and menus.)
Defaults¶
“I2C_0”
“I2C_0”
Kconfig definitions¶
At <Zephyr>/boards/arm/sam_e70_xplained/Kconfig.defconfig:24
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config ETH_SAM_GMAC_MAC_I2C_DEV_NAME string default "I2C_0" depends onETH_SAM_GMAC
&&BOARD_SAM_E70_XPLAINED
At <Zephyr>/boards/arm/sam_v71_xult/Kconfig.defconfig:28
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config ETH_SAM_GMAC_MAC_I2C_DEV_NAME string default "I2C_0" depends onETH_SAM_GMAC
&&BOARD_SAM_V71_XULT
At <Zephyr>/drivers/ethernet/Kconfig.sam_gmac:107
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:20
→ <Zephyr>/drivers/ethernet/Kconfig:51
Menu path: (Top) → Device Drivers → Ethernet Drivers → Atmel SAM Ethernet driver → Read from an I2C EEPROM
config ETH_SAM_GMAC_MAC_I2C_DEV_NAME string "I2C bus driver device name" depends onETH_SAM_GMAC_MAC_I2C_EEPROM
&Ð_SAM_GMAC
&&NET_L2_ETHERNET
help Device name, e.g. I2C_0, of an I2C bus driver device. It is required to obtain handle to the I2C device object.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)