-
CONFIG_CLOCK_STM32_D1CPRE
¶
D1 Domain, CPU1 clock prescaler
Type: int
Help¶
D1 Domain, CPU1 clock (sys_d1cpre_ck prescaler), allowed values: 1, 2, 4, 8, 16, 64, 128, 256, 512.
Direct dependencies¶
BOARD_NUCLEO_H745ZI_Q_M7
|| BOARD_NUCLEO_H745ZI_Q_M4
|| BOARD_STM32H747I_DISCO_M7
|| BOARD_STM32H747I_DISCO_M4
|| (SOC_SERIES_STM32H7X
&& CLOCK_CONTROL_STM32_CUBE
&& CLOCK_CONTROL
)
(Includes any dependencies from ifs and menus.)
Defaults¶
1
1
1
Kconfig definitions¶
At <Zephyr>/boards/arm/nucleo_h745zi_q/Kconfig.defconfig:12
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config CLOCK_STM32_D1CPRE int default 1 depends onBOARD_NUCLEO_H745ZI_Q_M7
||BOARD_NUCLEO_H745ZI_Q_M4
At <Zephyr>/boards/arm/stm32h747i_disco/Kconfig.defconfig:18
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:18
Menu path: (Top)
config CLOCK_STM32_D1CPRE int default 1 depends onBOARD_STM32H747I_DISCO_M7
||BOARD_STM32H747I_DISCO_M4
At <Zephyr>/drivers/clock_control/Kconfig.stm32h7:21
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:32
→ <Zephyr>/drivers/Kconfig:54
→ <Zephyr>/drivers/clock_control/Kconfig:25
→ <Zephyr>/drivers/clock_control/Kconfig.stm32:133
Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control
config CLOCK_STM32_D1CPRE int "D1 Domain, CPU1 clock prescaler" range 1 512 default 1 depends onSOC_SERIES_STM32H7X
&&CLOCK_CONTROL_STM32_CUBE
&&CLOCK_CONTROL
help D1 Domain, CPU1 clock (sys_d1cpre_ck prescaler), allowed values: 1, 2, 4, 8, 16, 64, 128, 256, 512.
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)