nordic-thingy53-edge-connector
Vendor: Generic or vendor-independent
Description
This binding provides a nexus mapping for 20 pins (HW rev 1.1.0) as depicted below
P1 VLi-Ion
P2 VBat
P3 VOUTB
P4 VDD_nRF53
P5 P1.01/GRANT
P6 P1.00/REQ
P7 RESET
P8 P0.05/AIN1
P9 P0.04/AIN0
P10 LOAD_SW_DISABLE
P11 VOUTB_2
P12 VDD_nRF21540
P13 VDD_EXP_BRD
P14 3V3
P15 P0.08/TRACEDATA3
P16 P0.09/TRACEDATA2
P17 P0.10/TRACEDATA1
P18 P0.11/TRACEDATA0
P19 P0.12/TRACECLK
P20 GND
Properties
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
This property is required. |
|
|
|
|
|
|
|
|
Number of items to expect in a GPIO specifier
This property is required. |
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic-thingy53-edge-connector” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Human readable string describing the device (used as device_get_binding() argument)
See Important properties for more information. This property is deprecated. |
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
IO channels specifiers
|
|
|
Provided names of IO channel specifiers
|
|
|
mailbox / IPM channels specifiers
|
|
|
Provided names of mailbox / IPM channel specifiers
|
|
|
Property to identify that a device can be used as wake up source.
When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.
Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.
|
|
|
Power domain the device belongs to.
The device will be notified when the power domain it belongs to is either
suspended or resumed.
|
|
|
Automatically configure the device for runtime power management after the
init function runs.
|