:orphan: .. raw:: html .. dtcompatible:: nordic-thingy53-edge-connector .. _dtbinding_nordic_thingy53_edge_connector: nordic-thingy53-edge-connector ############################## Vendor: :ref:`Generic or vendor-independent ` Description *********** .. code-block:: none This binding provides a nexus mapping for 20 pins (HW rev 1.1.0) as depicted below P1 VLi-Ion P2 VBat P3 VOUTB P4 VDD_nRF53 P5 P1.01/GRANT P6 P1.00/REQ P7 RESET P8 P0.05/AIN1 P9 P0.04/AIN0 P10 LOAD_SW_DISABLE P11 VOUTB_2 P12 VDD_nRF21540 P13 VDD_EXP_BRD P14 3V3 P15 P0.08/TRACEDATA3 P16 P0.09/TRACEDATA2 P17 P0.10/TRACEDATA1 P18 P0.11/TRACEDATA0 P19 P0.12/TRACECLK P20 GND Properties ********** .. tabs:: .. group-tab:: Node specific properties Properties not inherited from the base binding file. .. list-table:: :widths: 1 1 4 :header-rows: 1 * - Name - Type - Details * - ``gpio-map`` - ``compound`` - This property is **required**. * - ``gpio-map-mask`` - ``compound`` - * - ``gpio-map-pass-thru`` - ``compound`` - * - ``#gpio-cells`` - ``int`` - .. code-block:: none Number of items to expect in a GPIO specifier This property is **required**. .. group-tab:: Deprecated node specific properties Deprecated properties not inherited from the base binding file. (None) .. group-tab:: Base properties Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the "nordic-thingy53-edge-connector" compatible. .. list-table:: :widths: 1 1 4 :header-rows: 1 * - Name - Type - Details * - ``status`` - ``string`` - .. code-block:: none indicates the operational status of a device Legal values: ``'ok'``, ``'okay'``, ``'disabled'``, ``'reserved'``, ``'fail'``, ``'fail-sss'`` See :ref:`dt-important-props` for more information. * - ``compatible`` - ``string-array`` - .. code-block:: none compatible strings This property is **required**. See :ref:`dt-important-props` for more information. * - ``reg`` - ``array`` - .. code-block:: none register space See :ref:`dt-important-props` for more information. * - ``reg-names`` - ``string-array`` - .. code-block:: none name of each register space * - ``interrupts`` - ``array`` - .. code-block:: none interrupts for device See :ref:`dt-important-props` for more information. * - ``interrupts-extended`` - ``compound`` - .. code-block:: none extended interrupt specifier for device * - ``interrupt-names`` - ``string-array`` - .. code-block:: none name of each interrupt * - ``interrupt-parent`` - ``phandle`` - .. code-block:: none phandle to interrupt controller node * - ``label`` - ``string`` - .. code-block:: none Human readable string describing the device (used as device_get_binding() argument) See :ref:`dt-important-props` for more information. This property is **deprecated**. * - ``clocks`` - ``phandle-array`` - .. code-block:: none Clock gate information * - ``clock-names`` - ``string-array`` - .. code-block:: none name of each clock * - ``#address-cells`` - ``int`` - .. code-block:: none number of address cells in reg property * - ``#size-cells`` - ``int`` - .. code-block:: none number of size cells in reg property * - ``dmas`` - ``phandle-array`` - .. code-block:: none DMA channels specifiers * - ``dma-names`` - ``string-array`` - .. code-block:: none Provided names of DMA channel specifiers * - ``io-channels`` - ``phandle-array`` - .. code-block:: none IO channels specifiers * - ``io-channel-names`` - ``string-array`` - .. code-block:: none Provided names of IO channel specifiers * - ``mboxes`` - ``phandle-array`` - .. code-block:: none mailbox / IPM channels specifiers * - ``mbox-names`` - ``string-array`` - .. code-block:: none Provided names of mailbox / IPM channel specifiers * - ``wakeup-source`` - ``boolean`` - .. code-block:: none Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary. * - ``power-domain`` - ``phandle`` - .. code-block:: none Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed. * - ``zephyr,pm-device-runtime-auto`` - ``boolean`` - .. code-block:: none Automatically configure the device for runtime power management after the init function runs.