NuMaker-PFM-M2351

Building TF-M

Build TF-M with M2351 by following commands:

$ mkdir build
$ cd build
$ cmake ../ \
        -G"Unix Makefiles" \
        -DTFM_LIB_MODEL=ON \
        -DTFM_PLATFORM=nuvoton/m2351 \
        -DTFM_TOOLCHAIN_FILE=../toolchain_GNUARM.cmake \
        -DTEST_NS=ON \
        -DCMAKE_BUILD_TYPE=RelWithDebInfo \
$ make install

Define TEST_NS=ON or TEST_S=ON for non-secure or secure regression test. CMAKE_BUILD_TYPE could be “Release”, “RelWithDebInfo” or “Minsizerel” TFM_LIB_MODEL=OFF and TFM_ISOLATION_LEVEL=2 can also be set but them cannot be defined with TEST_S=ON or TEST_NS=ON at the same time due to limited RAM size of M2351. Other cmake parameters should not be changed.

Flashing Image with Nuvoton NuLink Tool

NuMaker-PFM-M2351 board supports on board ICE called NuLink. Connect NuLink to PC with USB cable and using NuLink Command Tool to flashing the image.

The commands are as follows:

> NuLink_M2351_M261 -C
> NuLink_M2351_M261 -E ALL
> NuLink_M2351_M261 -W APROM ./build/bin/bl2.bin 0
> NuLink_M2351_M261 -W APROM ./build/bin/tfm_s_ns_signed.bin 0 0x10000
> NuLink_M2351_M261 -W NSCBA 0x50000