CONFIG_2ND_LVL_INTR_00_OFFSET

Level 1 IRQ line for 2ND level aggregator 0

Type: int

Help

This is the level $(prev-level-num) interrupt number for level $(cur-level-num) interrupt aggregator $(aggregator).

Kconfig definitions

At <Zephyr>/boards/xtensa/intel_adsp_cavs15/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default CAVS_ICTL_0_OFFSET
    depends on BOARD_UP_SQUARED_ADSP

At <Zephyr>/boards/xtensa/intel_adsp_cavs18/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default CAVS_ICTL_0_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS18

At <Zephyr>/boards/xtensa/intel_adsp_cavs20/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default CAVS_ICTL_0_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS20

At <Zephyr>/boards/xtensa/intel_adsp_cavs25/Kconfig.defconfig:19

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default CAVS_ICTL_0_OFFSET
    depends on BOARD_INTEL_ADSP_CAVS25

At <Zephyr>/boards/xtensa/intel_s1000_crb/Kconfig.defconfig:21

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:24

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default CAVS_ICTL_0_OFFSET
    depends on BOARD_INTEL_S1000_CRB

At <Zephyr>/soc/riscv/openisa_rv32m1/Kconfig.defconfig:65

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:25<BuildDir>/Kconfig/Kconfig.soc.defconfig:1

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default 24
    depends on MULTI_LEVEL_INTERRUPTS && SOC_OPENISA_RV32M1_RISCV32

At <Zephyr>/soc/riscv/riscv-privilege/miv/Kconfig.defconfig.series:23

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:25<BuildDir>/Kconfig/Kconfig.soc.defconfig:1<Zephyr>/soc/riscv/riscv-privilege/Kconfig.defconfig:6

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default 11
    depends on SOC_SERIES_RISCV32_MIV

At <Zephyr>/soc/riscv/riscv-privilege/sifive-freedom/Kconfig.defconfig.series:23

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:25<BuildDir>/Kconfig/Kconfig.soc.defconfig:1<Zephyr>/soc/riscv/riscv-privilege/Kconfig.defconfig:6

Menu path: (Top)

config 2ND_LVL_INTR_00_OFFSET
    int
    default 11
    depends on SOC_SERIES_RISCV_SIFIVE_FREEDOM

At <Zephyr>/drivers/interrupt_controller/Kconfig.multilevel.aggregator_template:3

Included via <Zephyr>/Kconfig:8<Zephyr>/Kconfig.zephyr:32<Zephyr>/drivers/Kconfig:26<Zephyr>/drivers/interrupt_controller/Kconfig:49<Zephyr>/drivers/interrupt_controller/Kconfig.multilevel:59

Menu path: (Top) → Device Drivers → Interrupt Controllers → Multi-level interrupt support → Second-level interrupt support

config 2ND_LVL_INTR_00_OFFSET
    int "Level 1 IRQ line for 2ND level aggregator 0"
    default 0
    depends on 2ND_LEVEL_INTERRUPTS
    help
      This is the level $(prev-level-num) interrupt number for level
      $(cur-level-num) interrupt aggregator $(aggregator).

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)