segmentation.h File Reference

#include <zephyr/types.h>

Go to the source code of this file.

Data Structures
struct	task_state_segment
struct	segment_descriptor
struct	pseudo_descriptor
struct	far_ptr

Macros
#define	SEG_TYPE_LDT   0x2
#define	SEG_TYPE_TASK_GATE   0x5
#define	SEG_TYPE_TSS   0x9
#define	SEG_TYPE_TSS_BUSY   0xB
#define	SEG_TYPE_CALL_GATE   0xC
#define	SEG_TYPE_IRQ_GATE   0xE
#define	SEG_TYPE_TRAP_GATE   0xF
#define	DT_GRAN_BYTE   0
#define	DT_GRAN_PAGE   1
#define	DT_READABLE   1
#define	DT_NON_READABLE   0
#define	DT_WRITABLE   1
#define	DT_NON_WRITABLE   0
#define	DT_EXPAND_DOWN   1
#define	DT_EXPAND_UP   0
#define	DT_CONFORM   1
#define	DT_NONCONFORM   0
#define	DT_TYPE_SYSTEM   0
#define	DT_TYPE_CODEDATA   1
#define	SEG_SELECTOR(index, table, dpl)   (index << 3 | table << 2 | dpl)
#define	DT_ZERO_ENTRY   { { 0 } }
#define	DT_CODE_SEG_ENTRY(base_p, limit_p, granularity_p, dpl_p, readable_p, conforming_p)
#define	DT_DATA_SEG_ENTRY(base_p, limit_p, granularity_p, dpl_p, writable_p, direction_p)
#define	DT_LDT_ENTRY(base_p, limit_p, granularity_p, dpl_p)
#define	DT_TSS_ENTRY(base_p, limit_p, granularity_p, dpl_p)
#define	DT_TSS_STD_ENTRY(base_p, dpl_p)
#define	DT_TASK_GATE_ENTRY(segment_p, dpl_p)
#define	DT_IRQ_GATE_ENTRY(segment_p, offset_p, dpl_p)
#define	DT_TRAP_GATE_ENTRY(segment_p, offset_p, dpl_p)
#define	DT_CALL_GATE_ENTRY(segment_p, offset_p, dpl_p, param_count_p)
#define	DTE_BASE(dt_entry)
#define	DTE_LIMIT(dt_entry)
#define	DTE_OFFSET(dt_entry)
#define	DT_INIT(entries)   { sizeof(entries) - 1, &entries[0] }

Macro Definition Documentation

DT_CALL_GATE_ENTRY

#define DT_CALL_GATE_ENTRY	(		segment_p,
			offset_p,
			dpl_p,
			param_count_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _SEGMENT_AND_OFFSET(segment_p, offset_p), \
 _SYS_DESC(SEG_TYPE_TRAP_GATE), \
 .reserved_or_param = (param_count_p), \
 .always_0_0 = 0 \
 }

DT_CODE_SEG_ENTRY

#define DT_CODE_SEG_ENTRY	(		base_p,
			limit_p,
			granularity_p,
			dpl_p,
			readable_p,
			conforming_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
 .accessed = 0, \
 .rw = (readable_p), \
 .cd = (conforming_p), \
 .executable = 1, \
 .descriptor_type = 1 \
 }

DT_CONFORM

#define DT_CONFORM   1

DT_DATA_SEG_ENTRY

#define DT_DATA_SEG_ENTRY	(		base_p,
			limit_p,
			granularity_p,
			dpl_p,
			writable_p,
			direction_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
 .accessed = 0, \
 .rw = (writable_p), \
 .cd = (direction_p), \
 .executable = 0, \
 .descriptor_type = 1 \
 }

DT_EXPAND_DOWN

#define DT_EXPAND_DOWN   1

DT_EXPAND_UP

#define DT_EXPAND_UP   0

DT_GRAN_BYTE

#define DT_GRAN_BYTE   0

DT_GRAN_PAGE

#define DT_GRAN_PAGE   1

DT_INIT

#define DT_INIT

(

entries

)

{ sizeof(entries) - 1, &entries[0] }

DT_IRQ_GATE_ENTRY

#define DT_IRQ_GATE_ENTRY	(		segment_p,
			offset_p,
			dpl_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _SEGMENT_AND_OFFSET(segment_p, offset_p), \
 _SYS_DESC(SEG_TYPE_IRQ_GATE), \
 .always_0_0 = 0 \
 }

DT_LDT_ENTRY

#define DT_LDT_ENTRY	(		base_p,
			limit_p,
			granularity_p,
			dpl_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
 _SYS_DESC(SEG_TYPE_LDT) \
 }

DT_NON_READABLE

#define DT_NON_READABLE   0

DT_NON_WRITABLE

#define DT_NON_WRITABLE   0

DT_NONCONFORM

#define DT_NONCONFORM   0

DT_READABLE

#define DT_READABLE   1

DT_TASK_GATE_ENTRY

#define DT_TASK_GATE_ENTRY	(		segment_p,
			dpl_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _SYS_DESC(SEG_TYPE_TASK_GATE), \
 .segment_selector = (segment_p) \
 }

DT_TRAP_GATE_ENTRY

#define DT_TRAP_GATE_ENTRY	(		segment_p,
			offset_p,
			dpl_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _SEGMENT_AND_OFFSET(segment_p, offset_p), \
 _SYS_DESC(SEG_TYPE_TRAP_GATE), \
 .always_0_0 = 0 \
 }

DT_TSS_ENTRY

#define DT_TSS_ENTRY	(		base_p,
			limit_p,
			granularity_p,
			dpl_p
	)

Value:

 { \
 _DESC_COMMON(dpl_p), \
 _LIMIT_AND_BASE(base_p, limit_p, granularity_p), \
 _SYS_DESC(SEG_TYPE_TSS) \
 }

DT_TSS_STD_ENTRY

#define DT_TSS_STD_ENTRY	(		base_p,
			dpl_p
	)

Value:

 DT_TSS_ENTRY(base_p, sizeof(struct task_state_segment), DT_GRAN_BYTE, \
 dpl_p)

DT_TYPE_CODEDATA

#define DT_TYPE_CODEDATA   1

DT_TYPE_SYSTEM

#define DT_TYPE_SYSTEM   0

DT_WRITABLE

#define DT_WRITABLE   1

DT_ZERO_ENTRY

#define DT_ZERO_ENTRY   { { 0 } }

DTE_BASE

#define DTE_BASE

(

dt_entry

)

Value:

 ((dt_entry)->base_low | \
 ((dt_entry)->base_mid << 16) | \
 ((dt_entry)->base_hi << 24))

DTE_LIMIT

#define DTE_LIMIT

(

dt_entry

)

Value:

 ((dt_entry)->limit_low | \
 ((dt_entry)->limit_hi << 16))

DTE_OFFSET

#define DTE_OFFSET

(

dt_entry

)

Value:

 ((dt_entry)->offset_low | \
 ((dt_entry)->offset_hi << 16))

SEG_SELECTOR

#define SEG_SELECTOR	(		index,
			table,
			dpl
	)		(index << 3 | table << 2 | dpl)

SEG_TYPE_CALL_GATE

#define SEG_TYPE_CALL_GATE   0xC

SEG_TYPE_IRQ_GATE

#define SEG_TYPE_IRQ_GATE   0xE

SEG_TYPE_LDT

#define SEG_TYPE_LDT   0x2

SEG_TYPE_TASK_GATE

#define SEG_TYPE_TASK_GATE   0x5

SEG_TYPE_TRAP_GATE

#define SEG_TYPE_TRAP_GATE   0xF

SEG_TYPE_TSS

#define SEG_TYPE_TSS   0x9

SEG_TYPE_TSS_BUSY

#define SEG_TYPE_TSS_BUSY   0xB