#include <stdbool.h>
#include <stdint.h>
#include "nrf_802154.h"

Go to the source code of this file.

Functions
void	nrf_802154_pib_init (void)
	Module that implements the storage of PIB attributes in the nRF 802.15.4 radio driver.

bool	nrf_802154_pib_promiscuous_get (void)
	Checks if the promiscuous mode is enabled.

void	nrf_802154_pib_promiscuous_set (bool enabled)
	Enables or disables the promiscuous mode.

bool	nrf_802154_pib_rx_on_when_idle_get (void)
	Checks if the RxOnWhenIdle mode is enabled.

void	nrf_802154_pib_rx_on_when_idle_set (bool enabled)
	Enables or disables the RxOnWhenIdle mode.

bool	nrf_802154_pib_auto_ack_get (void)
	Checks if the auto ACK procedure is enabled.

void	nrf_802154_pib_auto_ack_set (bool enabled)
	Enables or disables the auto ACK procedure.

bool	nrf_802154_pib_pan_coord_get (void)
	Checks if the radio is configured as the PAN coordinator.

void	nrf_802154_pib_pan_coord_set (bool enabled)
	Configures the device as the PAN coordinator.

uint8_t	nrf_802154_pib_channel_get (void)
	Gets the currently used channel.

void	nrf_802154_pib_channel_set (uint8_t channel)
	Sets the channel that will be used by the driver.

int8_t	nrf_802154_pib_tx_power_get (void)
	Gets the transmit power.

void	nrf_802154_pib_tx_power_set (int8_t dbm)
	Sets the transmit power used for ACK frames.

const uint8_t *	nrf_802154_pib_pan_id_get (void)
	Gets the PAN ID used by this device.

void	nrf_802154_pib_pan_id_set (const uint8_t *p_pan_id)
	Sets the PAN ID used by this device.

const uint8_t *	nrf_802154_pib_extended_address_get (void)
	Gets the extended address of this device.

void	nrf_802154_pib_extended_address_set (const uint8_t *p_extended_address)
	Sets the extended address of this device.

const uint8_t *	nrf_802154_pib_short_address_get (void)
	Gets the short address of this device.

void	nrf_802154_pib_short_address_set (const uint8_t *p_short_address)
	Sets the short address of this device.

void	nrf_802154_pib_cca_cfg_set (const nrf_802154_cca_cfg_t *p_cca_cfg)
	Sets the radio CCA mode and threshold.

void	nrf_802154_pib_cca_cfg_get (nrf_802154_cca_cfg_t *p_cca_cfg)
	Gets the current radio CCA configuration.

bool	nrf_802154_pib_coex_rx_request_mode_set (nrf_802154_coex_rx_request_mode_t mode)
	Sets Coex request mode used in receive operations.

nrf_802154_coex_rx_request_mode_t	nrf_802154_pib_coex_rx_request_mode_get (void)
	Gets Coex request mode used in receive operations.

bool	nrf_802154_pib_coex_tx_request_mode_set (nrf_802154_coex_tx_request_mode_t mode)
	Sets Coex request mode used in transmit operations.

nrf_802154_coex_tx_request_mode_t	nrf_802154_pib_coex_tx_request_mode_get (void)
	Gets Coex request mode used in transmit operations.

Functions