#include <stdint.h>
#include <stdbool.h>
#include <nrf.h>
#include <nrf_peripherals.h>
#include "nrf_errno.h"
#include "mpsl_tx_power.h"
#include "mpsl_fem_types.h"

Go to the source code of this file.

Data Structures
struct	mpsl_fem_event_t
	MPSL Front End Module event. More...

struct	mpsl_tx_power_split_t
	Represents components of tx_power to be applied for stages on transmit path. More...

struct	mpsl_fem_caps_t
	Structure representing capabilities and characteristics of the FEM in use. More...

Macros
#define	MPSL_FEM_CAPS_FLAG_PA_SETUP_REQUIRED (1U << 0)
	PA setup is required before starting a transmission.

#define	MPSL_FEM_CAPS_FLAG_LNA_SETUP_REQUIRED (1U << 1)
	LNA setup is required before starting a reception.

Typedefs
typedef uint8_t	mpsl_subscribable_hw_event_t
	Type representing a multiple-subscribable hardware event.

Enumerations
enum	mpsl_fem_functionality_t { MPSL_FEM_PA = 1 << 0 , MPSL_FEM_LNA = 1 << 1 , MPSL_FEM_ALL = MPSL_FEM_PA \| MPSL_FEM_LNA }
	PA and LNA functionality types. More...

enum	mpsl_fem_event_type_t { MPSL_FEM_EVENT_TYPE_TIMER , MPSL_FEM_EVENT_TYPE_GENERIC }
	PA and LNA activation event types. More...

Functions
void	mpsl_fem_caps_get (mpsl_fem_caps_t *p_caps)
	Gets the capabilities of the FEM in use.

void	mpsl_fem_enable (void)
	Enable Front End Module.

int32_t	mpsl_fem_disable (void)
	Disable Front End Module.

int32_t	mpsl_fem_pa_configuration_set (const mpsl_fem_event_t const p_activate_event, const mpsl_fem_event_t const p_deactivate_event)
	Sets up PA using the provided events for the upcoming radio transmission.

int32_t	mpsl_fem_pa_configuration_clear (void)
	Clears up the configuration provided by the mpsl_fem_pa_configuration_set function.

int32_t	mpsl_fem_lna_configuration_set (const mpsl_fem_event_t const p_activate_event, const mpsl_fem_event_t const p_deactivate_event)
	Sets up LNA using the provided event for the upcoming radio reception.

int32_t	mpsl_fem_lna_configuration_clear (void)
	Clears up the configuration provided by the mpsl_fem_lna_configuration_set function.

void	mpsl_fem_deactivate_now (mpsl_fem_functionality_t type)
	Deactivates PA/LNA with immediate effect.

int32_t	mpsl_fem_abort_set (mpsl_subscribable_hw_event_t event, uint32_t group)
	Instruct Front End Module to disable PA and LNA as soon as possible using the group following the event.

int32_t	mpsl_fem_abort_extend (uint32_t channel_to_add, uint32_t group)
	Adds one more PPI channel to the PPI Group prepared by the mpsl_fem_abort_set function.

int32_t	mpsl_fem_abort_reduce (uint32_t channel_to_remove, uint32_t group)
	Removes one PPI channel from the PPI Group prepared by the mpsl_fem_abort_set function.

int32_t	mpsl_fem_abort_clear (void)
	Clears up the configuration provided by the mpsl_fem_abort_set function.

void	mpsl_fem_cleanup (void)
	Cleans up the configured PA/LNA hardware resources.

int8_t	mpsl_fem_tx_power_split (const mpsl_tx_power_t power, mpsl_tx_power_split_t *const p_tx_power_split, uint16_t freq_mhz, bool tx_power_ceiling)
	Splits transmit power value into components to be applied on each stage on transmit path.

int32_t	mpsl_fem_pa_power_control_set (mpsl_fem_pa_power_control_t pa_power_control)
	Sets the PA power control.

void	mpsl_fem_lna_is_configured (int8_t *const p_gain)
	Returns LNA gain if the LNA signal is configured and enabled, 0 otherwise.

bool	mpsl_fem_prepare_powerdown (NRF_TIMER_Type *p_instance, uint32_t compare_channel, uint32_t ppi_id, uint32_t event_addr)
	Prepares the Front End Module to switch to the Power Down state.

void	mpsl_fem_utils_available_cc_channels_cache (uint8_t mask)
	Caches the CC channels to be used by FEM.

Data Structures

Macros

Typedefs

Enumerations

Functions