pcd.h File Reference

#include <zephyr/device.h>
#include <sys/types.h>
#include <dfu/pcd_common.h>

Go to the source code of this file.

Enumerations
enum	pcd_status {   PCD_STATUS_COPY = 0 , PCD_STATUS_DONE = 1 , PCD_STATUS_FAILED = 2 , PCD_STATUS_READ_VERSION = 3 ,   PCD_STATUS_LOCK_DEBUG = 4 }

Functions
int	pcd_network_core_update (const void *src_addr, size_t len)
	Sets up the PCD command structure with the location and size of the firmware update. Then boots the network core and checks if the update completed successfully.
int	pcd_network_core_update_initiate (const void *src_addr, size_t len)
	Sets up the PCD command structure with the location and size of the firmware update. Then boots the network core and initiates the update procedure. The function will return before the update procedure on the network core has completed or failed, and will indicate success as long as the initialization of the update procedure was successful. The network core will still be in a powered on state when this function returns.
void	pcd_lock_ram (bool lock_conf)
	Lock the RAM section used for IPC with the network core bootloader.
void	pcd_done (void)
	Update the PCD CMD to indicate that the operation has completed successfully.
void	pcd_fw_copy_invalidate (void)
	Invalidate the PCD CMD, indicating that the copy failed.
enum pcd_status	pcd_fw_copy_status_get (void)
	Check the PCD CMD to find the status of the update.
const void *	pcd_cmd_data_ptr_get (void)
	Get value of 'data' member of pcd cmd.
int	pcd_fw_copy (const struct device *fdev)
	Perform the DFU image transfer.