nrf_modem_dect_phy_modem_cfg Struct Reference

Modem PHY configuration. More...

#include <nrf_modem_dect_phy.h>

Data Fields
int16_t	temperature_limit
	Maximum operating temperature, in degrees Celsius.
struct {
uint32_t   idle_to_rssi
	From Idle to RSSI RF sampling start. More...
uint32_t   rssi_to_idle
	From RF sampling of RSSI to Idle. More...
uint32_t   idle_to_rx
	From Idle to RX RF sampling start. More...
uint32_t   rx_to_idle
	From RF sampling of RX to Idle. More...
uint32_t   rx_rssi_to_idle
	From RF sampling of RX with RSSI measurement to Idle. More...
uint32_t   rx_stop_to_rf_off
	From RX stop request to RF sampling stop. More...
uint32_t   rx_rssi_stop_to_rf_off
	From RX with RSSI measurement stop request to RF sampling stop. More...
uint32_t   idle_to_tx
	From Idle to TX RF sample transmission start. More...
uint32_t   idle_to_tx_with_lbt
	From Idle to TX with LBT monitoring RF sampling start. More...
uint32_t   tx_to_idle
	From TX RF sample transmission end (with or without LBT) to Idle. More...
uint32_t   idle_to_txrx_with_lbt
	From Idle to TX with LBT monitoring RF sampling start in TX-RX operation. More...
uint32_t   txrx_tx_to_rx
	From TX RF sample transmission end to RX RF sampling start in TX-RX operation. More...
}	latency
	Latency of radio state transitions, in modem time units.

Detailed Description

Modem PHY configuration.

Includes radio state transition latencies and operating temperature limit.

---

The documentation for this struct was generated from the following file:

• nrf_modem/include/nrf_modem_dect_phy.h